Tries to access an external hard drive get the error "system error 1130 has occurred."

Similar Questions

• In Windows 7 when you try to copy files to an external hard drive, getting the error "are you sure you want to copy this file without its properties?

  I know there have been a few posts on this in the past, but I have a slightly different query.

  To copy files from my drive NTFS of Windows 7 64 bit for my Western Digital My Book World Edition II 2 GB player manually, not with the WD software provided), for some files, the following message appears.
  "Are you sure you want to copy this file without its properties?  The X file has properties that cannot be copied to the new location. »
  After investigation, it appears that Western Digital My Book World Edition II is not NTFS format and is, in fact, driven Linux.
  Their technical support has confirmed that, despite the message, it is safe to copy files and rely on this backup (I want to backup my drive HARD whole so I can do a clean install - so it's really important!).
  Is anyone able to advise exactly what means the message in terms of properties lost?

  If you right-click on one of the files in Windows Explorer, then select Properties, you will see the Details tab of the properties he wouldn't if the files have been copied to a drive not NTFS. They are written in an Alternate Data Stream (ADS), and the FAT format readers include ADS.

  It depends on the file type of the importance of these properties. If you have spent a lot of time, adding titles and comments and authors and authors e-mail addresses to docprops your Word documents, for example, that the work would be lost.

  If you can live with the loss of these properties, go ahead - standard properties will be re-writings in the file when you restore from backup. It's of course time and resources.

  To avoid this problem, format your external drive to use the NTFS system.

  Noel

• "Access denied" error XP trying to access an external hard drive used on Windows 7

  Hello

  I used my external hard drive as usual on my XP machine for months, but yesterday I had to use it on another computer running Windows 7. Windows 7 asked something like "do you want to enable access to this hard drive?" and I clicked Yes thinking that it wouldn't cause any problems (showed a green bar that drains into the upper part of the window), but now that I'm trying to use it again on my XP machine I get an access denied error such as permissions changed. I just installed service pack 3, but which did not help.

  Help it would be greatly appreciated the fixing, I'm happy to just continue to use the external drive on my XP machine - use it on other Windows 7 machine was just one time.

  Thank you!

  Simon

  This should help: How is ownership of a file or a folder in Windows XP .

  Boulder computer Maven
  Most Microsoft Valuable Professional

• Install windows 7 on the new hard drive getting the error cannot continiue

  I bought a new drive hard seagate from my existing was only 250 gig, so this is a new clean install, I installed the drive hard drive start the computer with the dick of installed Starter, he began to load then I get this error message saying;
  "Update failed due to a stop press unexpected ok to restart the computer." Installation will continue after the computer restarts. »
  However, when you press ok, the machine starts, but continues to display this error message and so am now stuck in a loop. What can I do to stop this, because I am totally confused. I have a second hard drive in the machine, but when it is started, he found the new HDD 1000 GB.

  I am running Windows 7 (64 bit),

  Processor AMD Phenom 11 X 4 3.4 ghz AM3 Quad

  MSI 790XT-G45 AM3 / AM2 + / AM2 AMD 790 X ATX card mother AMD

  Any help would be appreciated

  First chech that the BIOS is configured to use the CD/DVD drive as frist boot device.

  Then remove the old drive and only connect the new drive.

  Start the PC and insert the CD that you created and boot from the CD.  If there is a "Long full" test, which is that you need to perform. Also check the SMART data (look for bad sectors).

  J W Stuart: http://www.pagestart.com

• do not open transcend hard drive, getting the error: "access is denied; parameter is incorrect. "

  When I connect my 1 TB transcend hard drive icon only appears in the Local disk and by double clicking on it says access is denied; parameter is incorrect... What do I do?

  Hi Olivier,.

  I suggest you follow the advice given by Nithyananda J on February 9, 2010 and check if this may help.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/i-cant-access-my-hard-disc-drives/71b6c2a4-4031-4f57-9aef-19d11daa4803

  Registry warning: Back up the registry

  Let us know the results. We will be happy to help you further.

• When you back up my files to a new hard drive, getting the error "destination path too long".

  Hello

  Today I was backing up my files on a new hard drive that I bought a week ago, and during the copy, I received the message following 'destination path too long ".
  And the file name is actually short "crouch" here is a snap of the image:

  http://imgkeep.com/0ij23kby74dn.html

  I don't know what to do!

  Original title: destination path too long?

  The key factor is not the name of the file itself, but the total length of the file name and the path of the folder.

  The help files for the application that you are using could tell you how long the total combination of the file-file may be [some more older can be limited to 255 characters, but I was not able to discover the current constraints].

• reloading the files of the external hard drive to the new computer laptop

  I'm trying to reloaded files etc. from an external hard drive to my laptop. I took the files of my old office that was on is way out, so just in case I lost them all I copied them. I tried setting up my external hard drive and transfer just a couple of files just to see if it would work. I sent them to my desktop from my laptop and they also went to my documents, but once the hard drive is disconnected files will not open. I do not know what I'm dong wrong as I am not very computor spirit, so that the answers would be useful in silly English thank you. Sorry to be so long-winded.

  Sheila

  Hello @shedeval

  I understand that you have copied your files on an external drive from your old computer.

  You tried to copy the files to the new computer, but when you disconnect the external hard drive the files are no longer accessible.

  I think that you have created or copied a shortcut to the new computer and not the actual files.  When you're logged out outside the new computer had more disk access to open files.

  I would like to redo the copy and when you finished externally, log out and then try again.

  Good luck!

• Bought the new computer windows 10, itunes has changed location of support for external hard drive. The music does not appear in itunes.

  BOUGHT NEW COMPUTER WINDOWS 10, CHANGED ITUNES MEDIA LOCATION FOR EXTERNAL HARD DRIVE. THE MUSIC DOES NOT APPEAR ON ITUNES.

  Changing the iTunes media folder location setting affects only where new additions to your library will be stored.  To use a disk external drive to store your library complete (and assuming that you have access to the original data of the library on an old computer) you must copy the iTunes folder, by default in C:\Users\username\Music, on the external drive - structure library and its records should be like this:

  

  The hold button SHIFT DOWN when you start iTunes and when you see this message:

  

  Click choose a library... then find and select the iTunes Library.itl in iTunes on your external drive folder.

  For more information, see user turingtest2 on make a library of portable split.  You must also acquire a 2nd external drive and allows create and maintain a backup your library.

• Where and how can I reinstall the external hard drive to the new HD to the computer?

  Original title: HD crashed.

  I want to thank the person who answered my question about the HD crashed I saved all my data and window xp. My next question is, how and where can I reinstall external hard drive for the new HD to the computer? Should I send it to drive c or where? I'm not strong when it comes to computers. I know just enough to get me in trouble. Thank you.

  Hello!

  You will need to use a full copy of Windows XP.  Should be a sticker with the product key on the side of your desk or below if it is a laptop.

  Once you have this drive, you can reinstall Windows XP.  After you have installed all the software and drivers, you will be able to transfer all your data to the new HARD drive.

  If you don't have a copy of Windows XP, you can probably get a copy of the recovery from the manufacturing of computer media.  Just to provide the model and serial number and they should sent it.

• Unable to connect the external hard drive on the computer of Windows 8

  Hi I have a laptop Windows 8, I don't know too plug I bought last year I recently bought a samsung 3 TB external hard drive I plugged it in and it was recognized tried to transfer files (photos and music) he transferred a little then kept showing error e/s even when I clicked ignore it just kept showing for the next photo , so I unplugged and ive not touched since ive then connected again today to have another shot at it but it does not even appear in the my computer part now ive red somewhere else on this site to go into Device Manager and I can see the mass with a yellow triangle storage device small as he said he could on the subject , I was reading I uninstalled and plugged the hard drive on and when I plug it then settling again, nothing appears when I go back into Device Manager it is there once again with the yellow triangle, thanks in advance if anyone can give me advice.

  Thanks for the reply.

  Have you tried to uninstall and reinstall the USB controller drivers?

  If so, have you installed latest drivers from the motherboard chipset?

  Follow the steps below and check if it works:

  1 download the drivers for external hard drive from the following link and check.

  http://www.Samsung.com/us/support/downloads

  2. click on the link to the HP Web site below to download the latest drivers. Search for drivers related to USB / external peripheral.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&LC=en&DLC=en&product=5078476

  Click scan now.

  
  3. If you have a third party security/firewall software installed, you need to change settings or disable it temporarily.
   
  NOTE: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software / update, you must reactivate as soon as you are finished. If you are connected to the
  Internet or network so that your antivirus software is disabled, your computer is vulnerable to attacks.
   
  I hope this helps. Back to us for assistance.

• backup to external hard drive with the Mavericks El Capitan

  How to back up the El Capitan on the same external hard drive with the Mavericks?

  How Mavericks backup external hard disk?

• You can plug an external hard drive to the iPad Pro?

  can plug you an external hard drive to the iPad Pro, I store all my technical documents on one and what you need to know if there is a way to connect to the iPad

  You can't plug an external hard drive on an iPad of any type.

  There are external hard drives that can create their own wifi network

  to which you can connect to your iPad. Your favorite search engine should

  provide more details.

• My netbook does not read my disk even if his reading of my external hard drive and the dongle

  My netbook does not read my disk even if his reading of my external hard drive and the dongle

  Hello

  1. what operating system do you use?

  2 did you change on your computer?

  3. did you receive an error message?

  I suggest you to follow the links and check out them.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/982116

  Your CD or DVD drive cannot read or write media

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

• I have an external hard drive and the althogh sound in 'remove hardware safely', it is not listed in 'my computer '.

  I have a HDD external and well that his "safely remove hardware" that is not listed in 'my computer' the problem is I am backing up Paolo and if I can not find I can't do.

  When I go to the hardware / device mananger it is in "O" but I can not find drive O

  Can someone please help.

  This external hard drive works on other systems?

  The drive will appear in the top of the disk management window?  If so, look at the column layout, Type, file system and status.  The "file system" must be FAT or NTFS.  From your description, it appears that Windows does not recognize the partition as being to the format in a way that he can use.  You may need to delete the existing partition (attention: this will remove all files that may exist on the disk), and then create a new partition in FAT32 or NTFS format.  Advice to do this, right-click the disk, choose 'Help', then go to:
  -> How To disk management...-> manage the volumes of base-> Delete, Create, or Format.

  HTH,
  JW

• How to copy a folder to an external hard drive with the same file on it and have it just add new files instead of replace all old already on there, as well as to add new?

  I want to copy a folder to an external hard drive with the file already on it and not having to replace all the files each time. I just want to click and drag the folder to the external hard drive and have it add new files I've added in the folder on my pc over time on the external hard drive. It's annoying to have to replace alllll the files each time.

  Thank you!

  A simple way is to use the second copy of Centered.com software. It is reasonably priced and will do exactly what you want. MS - MVP - Elephant Boy computers - don't panic!