Western digital external drive not recognized in windows 7

Similar Questions

• Western Digital external Hardrive not recognized.

  Original title: Western Digital external Hardrive

  I bought a new laptop HP Windows 8 and im trying to connect to an external hard drive (Western Digital) I connected the hard drive on my USB 2.0 port, however it does not appear in my computer for me to be able to access one of my files?

  When I go into Device Manager, I can see the status by saying "this device is working properly" but why can't, I see?

  Help, please

  Hi, Carlos

  I had this problem fixed thanks, I finally got to partition the hard drive and have upward and currently underway.  Thanks for your help.
  Concerning
  Jan

• external drive not recognized in my computer explorer\

  Hey.
  My Western Digital external drive is recognized on USB, but not recognized in 'my computer\ explorer' or autorun.
  This means that I can make a right click on the bar at the bottom right and 'safely remove hardware, still not displayed in the Explorer.
  I did everything I can to make this work, without result.
  Now what?

  Thank you.

  Try these:

  1 see if his watch in computer management, you might just have to assign a drive letter.
  Change, add, or remove a drive letter
  http://Windows.Microsoft.com/en-us/Windows-Vista/change-add-or-remove-a-drive-letter

  2 try it on another computer, if its does not work, try to replace the cable with a good known working cable.

  3. open the Device Manager, see if there is an unknown device under Bus USB controllers, do a right-click and then uninstall it. If this does not work uninstall everything under USB controllers then reboot, they should put it back.

  4 run Fix it.
  Tips for solving problems of USB devices
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

  5 see this thread:
  Windows Vista device not recognized USB
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-hardware/Windows-Vista-USB-device-not-recognized/58fa364a-6faf-44B8-9821-7f6eb4873da2

• The lack of CD/DVD drive - not recognized by windows or other programs

  help-tried several fixes m/s and fix it but did not help. Here are a few messages I get: when in the details of the driver for my Sony DVD + RW AWQ160s - update drivers: here are 2 notches and uncked 2, one by Sonic Solutions and a Roxio time saying no digitally signed (that would be a problem)?  also when I look at update or install the updated driver, after that search, I get this is the best driver for this device - I don't have this device Ouch!  Without my CD drive E work of course I can't even try reinstalling drivers/utilities cd... can someone help this computer incompetent gal?  I'm ready to wipe and reinstall vista I have other problems like IE does not and ms word does not always.  I did go back several times, and perhaps not far enough back but had a Trojan horse and do not want to deal with it again.  thx for any help

  Hello

  (1) would you please provide more information about the problem you are having with word and Internet Explorer?

  Method 1: You may need to reinstall Roxio on your computer, please see the article below for programs that can cause this problem:

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/982116

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base.
  How to back up and restore the registry in Windows

   

  Method 2: If a Protection of resources Windows (WRP) file is missing or is damaged, Windows may not behave as expected. Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer
  ***************************************************************************
  Visit our Microsoft answers feedback Forum and let us know what you think.

• CD/DVD drive not recognized by Windows all of a sudden

  The opitical drive had been used with problem. I removed a couple of days and when I came back it is no longer listed in "MY Computer". Put everything in the disc drive is not recognized. The drive does not appear on the list th of the material system. The drive has power since it extends and retracts. He tries (the light) to play the disc but stops.

  Hi Ranamaska,

  You can follow this link & check if the problem persists:

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  Important:  This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, see the following article: 322756 (http://support.microsoft.com/kb/322756/) how to back up and restore the registry in Windows?

  Hope the helps of information.

• CD/DVD drive not recognized by Windows Vista

  I installed a suite of burningb of CD and DVD on my Toshiba (under Vista Home Premium). My CD/DVD drive appeared more in the computer and was no longer functional. I deleted the program I installed and apparently caused the problem, but it did not help. I have read through the help of Microsoft (929461, 314060) documents and used the Fix - It utility. Also unsuccessful. I discovered the response of Martin, the technical support engineer made on May 5, 2009. I followed his instructions with great success. However, my question now is this: I have still some remains of the problem left over. I get an error message at startup saying, 'InstaBurn UDF driver is not installed correctly. Run the InstaBurn installation program. ' InstaBurn is part of the suite of the copy (hotpics by Nova Development Corp.).  I also have an error message of my reader DVD Toshiba saying that the DVD player does not work - although it is. I played a DVD as a test on it after that I followed the instructions above. How can I remove these error messages annoying that aren't accurate?  Would appreciate any information about this minor - but annoying problem.

  Hello

  Do a Restore Point then you can go back to where you are if necessary although you should not have to:

  How to create a Vista System Restore Point
  http://www.Vistax64.com/tutorials/76332-system-restore-point-create.html

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html
  ---------------------------------------------------------------

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================================

  Go to Toshiba and download and drivers or programs that affect the CD/DVD drive - Chipset
  and BIOS updates can also play a role.

  For any download - SAVE - go to where you put them - click on - RUN AS ADMIN

  Toshiba downloads - access your model
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=download

  Then reinstall the programs that you use for this drive.

  Hope these helps.

  Rob - bicycle - Mark Twain said it is good.

• Western digital external USB 2.0 500 GB hard drive not recognized by Windows 7 Explorer. How can I fix it? ___Thank you for your help.

  The hard drive worked well until KB2398632 & KB2347290 updates have been downloaded and installed on 16/09/10.  Hard drive works fine on my Vista machine at work.

  On my own machine (Windows 7), the drive is seen in my BIOS.  He also appeared in the "features and properties" of the control panel Windows 7 and the 'properties' indicates that the device is functioning properly.  The pilot is also updated.

  It does not appear in the Windows 7 Explorer under 'computer '. Only the C: drive is indicated.

  My AMD South Bridge set drivers are up to date my USB 3.0 being drivers.

  Western Digital 500 GB external hard drive is several years old.

  two updates have no effect to detect the hardware. It was an IE and and update printer spooler. Remove it from the Device Manager and plug it into another USB port. "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• Western Digital My Book 300 1 TB external drive not recognized Vista

  The post road has worked well for about 6 months until he lost power.  I tried everything in all applications help I can find. Western Digital says it's a Vista operating system driver problem.

  Drive external drive of 1 TB Western Digital My Book 300 was unplugged inadvertently power source. Now my Vista OS not only does not recognize the drive, but it is more listed on my screen of material. What should I do?

  Hi famousplumber,

  Please make sure that you have downloaded the latest software/drivers for the external drive:

  http://support.wdc.com/product/download.asp?lang=en

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Hitachi Lifestudio external hard drive not recognized on Windows Vitsa... why?

  I have a hitachi lifestudio external hard drive and it works great 50% of the time... the other 50%, I fight because it not being recognized on my computer or laptop (both vista).  I plugged it to my computer now and it will only recognize the player but is not the one with my files that I need.  I have two USB cords connected and it was working fine yesterday!  Now all of a sudden it won't work at all.  I got and rehooked many times now and still nothing.  Other USB ports are filled with our wireless mouse and others.  Is there a way to force vista to recognize something?

  Hello

  ·          Were there any changes made to your computer before this problem?

  Step 1: Try running Microsoft fix it in the following article:

  Reference: http://support.microsoft.com/gp/hardware_device_problems

  See also: http://windows.microsoft.com/en-US/windows-vista/Tips-for-solving-problems-with-USB-devices

  Step 2: Check if the external drive is getting detected in disk management.

  If the hard drive is recognized in disk management and if there is no letter assigned drive, I suggest you make a right click on the drive and assign a drive letter and check to see if it helps:

  Reference: http://windows.microsoft.com/en-US/windows-vista/Change-add-or-remove-a-drive-letter

• External CD/DVD RW drive not recognized by Windows XP

  Original title: Professional. Have an advantage humbucker 16 X 8 DVD/CD RW & ATi Radeon 9550 AGP 250 M for video and VGA that is not recognized

  Have a double microphone 16 X 8 DVD/CD RW advantage which is not recognized by XP Professional.  Also have a CD unit and when windows installs the drivers - it gives them both the same driver.  DVD RW is only recognized as a CD! Have used Microsoft fixit and he says everything is fine. -It uses the same driver for CD and DVD RW units.

  Have also an ATi Radeon 9550 AGP 250 M for the video and VGA and Windows XP does not - have question marks for them in Device Manager.  Microsoft fixit - did fix this problem.

  Have deleted the drivers and tried to control the computer for downloads by Microsoft and it can't find them - if I do a check for hardware changes, he finds only those who do not work properly and that don't work at all, as indicated above.

  Also went on the Microsoft Web site and cannot find a solution it - clicked on links with any help that I could see.

  Sorry for the problem - just fusterated

  LF

  Hello

  To work around this problem in Microsoft Windows XP, follow these steps:

  Note: Serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article http://support.microsoft.com/kb/322756

  Step 1: Remove the registry entries modified. To do this, follow these steps:

  a. Click Start, click Run, type regedit and then click OK.

  (b) in the navigation pane, search for, and then click the following registry subkey:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  (c) in the right pane, click UpperFilters.

  d. in the Edit menu, click on delete.

  e. When you are prompted to confirm the deletion, click Yes.

  f. in the right pane, click LowerFilters.

  g. in the Edit menu, click on delete.

  h. When you are prompted to confirm the deletion, click Yes.

  i. exit the registry editor.

  j. restart the computer.

  Note: If you notice a loss of functionality in a particular program as in the CD recording software after you remove registry UpperFilters and LowerFilters values, reinstall this software. If this problem continues, contact the supplier of software to help.

  Step 2: Remove the existing drivers. To do this, follow these steps:

  a. Click Start and then click Control Panel.

  b. If the control panel is in category view, click performance and Maintenance and then click System.

  c. If the control panel is in Classic view, double-click System.

  d. click the Hardware tab, and then click Device Manager.

  e. expand CD-ROM/DVD-ROM drives, right click on the device CD and DVD and then click on uninstall.

  f. When you are prompted to confirm that you want to remove the device, click OK.

  g. restart the computer.

  Note: after you restart your computer. the drivers will be automatically installed.

  See: http://support.microsoft.com/kb/982116/en-us

• External SATA drive not recognized in Windows 7

  I use a SATA Sabrent USB adapter to connect an old hard drive Samsung SATA with Windows XP on it to my new Windows 7 laptop.  The older hard drive a lot of files on what I would like to transfer through.  After I have the hard drive lights and then connect the USB adapter to the laptop, I see the message that the drivers have been installed, but no hard drive does not appear in the my computer window or in the disk management window.  Indeed, these windows will usually hang after that I connected the drive.  This could be a problem with the drivers not installed, or is there something else?  Any help is appreciated, I really want to recover the files from my old hard drive!

  Thank you
  Justin

  Hello

  1. the hard drive is compatible with Windows 7?

  2. do you get an error code in Device Manager?

  3. What is the model of the Samsung drive?

  Method 1:

  I suggest you to connect the device to a different USB port and check if it helps.

  Also, try to connect the device to another system running Windows 7 and check if it is fixed.

  Method 2:

  Follow the link below, run the fix it tool and check if the problem is resolved.

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Let us know if it helps.

• EliteOne 800 G2: EliteOne 800 G2 NIC driver not recognized with Windows Deployment Service WDS

  Hello

  I have just taken receipt of 5 new HP EliteOne 800 G2 23 "no touch machines. All PC's are generally imaged using Windows Deployment Services.

  I downloaded sp72515.exe that is the Intel I219 NIC driver pack for Windows 7 64 bit and injected these drivers into Windows Deployment Service and updated the boot LiteTouchPE_x64.wim file. Windows reported it went slowly and the 6 drivers concerned are all showing loaded with so much success in WDS.

  

  

  Problem. When I PXE boot the Windows EliteOne 800 G2 pilot of the CARD is not recognized by the 800 EliteOne G2.

  Wizard error

  A connection to the deployment share (\ < servername > \Deploymentshare$) could not be made. The following network device did not have a driver installed. PCI\VEN_8086 & DEV_15B7 & SUBSYS_8058103C & REV_31

  Hello:

  The only suggestion I can offer would be to try the driver directly from Intel...

  The 2nd file listed on the left side of the page is for W7 x 64.

  https://Downloadcenter.Intel.com/download/18713/network-adapter-driver-for-Windows-7-?v=t

• 1.5 TB external DRIVE not recognized on various laptops disk

  Hello

  I was wondering if someone could help me.

  I bought my 1.5 terrabyte toshiba external hard drive just for more than a year. It works fine on my other computer, laptop and cell phone from my boyfriend, but when I joined four other new laptops (all different brands) recently it was not recognized at all on these laptops.

  Is there something wrong with my outside or something on these computers it prevents to be recognized? Do you know how I can fix this problem?

  Thank you very much!

  Hello

  And if you connect the external HARD drive to your boyfriend s computer laptop, everything is always ok? Only problems with new laptops?

  Well that s really strange have you tried another USB cable and different USB ports?

  Maybe on the new laptops the antivirus or firewall blocks access to the external hard drive. Check your security software and to allow external devices.

• HARD drive not recognized by Windows Vista Home Edition (32-bit with Service Pack 2)

  Windows stopped to recognize external 500 GB drive external HARD on my Ascer Aspire 5610Z attached via the USB port.  Have tried two USB ports, but won't recognize the device.  Seeing of the device lights up and the device can be played on another laptop.  OK worked until a week or two ago, but cannot restore because it's on this unit that the backups are done!   Windows is 'unknown material' and trying to find the driver, without success.   Device Manager reflects an unknown device but gives no description, etc.

  Hi Peter St Clair,.

  1. did you of recent changes on the computer?

  2 are you able to access other USB devices on the computer?

  Method 1

  See the link below and run them the fixit tool available, check if it works.

  Tips for solving problems of USB devices

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

   

  Also, check if the drive is detected and letter drive affected by the management of the disks on the computer.

  Change, add, or remove a drive letter

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-add-or-remove-a-drive-letter

  Method 2

  If the previous step fails, then I suggest you reinstall the USB controllers on the computer and check if it works.

  Note: If you use a USB mouse, please follow the steps of "Using the keyboard" to reinstall the USB controllers. Windows 7 will reinstall all the controllers automatically after restarting your computer.

  Use the mouse

  --------------

  First of all, please disconnect all USB devices and then perform the following steps:

  (a) click on 'Start', type 'Device Manager' (without the quotes) in the search bar and press "Enter." If necessary, click on continue.

  (b) in Device Manager, double-click to expand the "USB Bus controllers", right-click on the "host controller", click "Uninstall" and click "OK".

  (c) repeat step 2 to uninstall all items under 'USB Bus controllers'.

  Then, restart your computer and Windows Vista will automatically reinstall all USB controllers.

  Use the keyboard

  -----------------

  First of all, please disconnect all USB devices. Then go through the following steps:

  (a) press "Ctrl + Esc" to open the Start Menu.

  (b) Device Manager to type in the search bar and press "Enter." If necessary, click on continue.

  (c) in the Device Manager, press Tab and use 'Up' and 'Down' to move the selection from 'de Bus USB controllers '.

  (d) press 'Right' and expand it.

  (e) press 'Down' to move to the first item, and then press "Delete" to delete.

  (f) repeat step 5 and uninstall everything under 'controllers of Bus USB '.

  I hope this helps!

  Halima S - Microsoft technical support.

• Bay DVD replace HARD drive not recognized by Windows

  I have a 7737 with the 256 GB SSD, but I wanted more storage internally and was not too annoyed to have DVD - so I bought a caddy and replaced the optical drive with a WD Scorpio Black 750 GB drive.

  When I went into administration - computer management - disk management tools, he acknowledged that the drive was there because he told me that he needed reprogramming - so I went ahead and let him. The disc quickly disappeared from the list, and I can't do anything that he can come back.

  I tried to refresh, rescan the drives, restart (how can I confirm the BIOS recognizes the drive correctly, as the "SATA ODD', but Windows still refuses to acknowledge that he is here.) Device Manager displays only the SSD and scanning for hardware changes have no effect.

  Maybe it's a coincidence, but now my laptop seems a touch slow, especially in the graphics... and I noticed that in the Task Manager, System interrupts now takes 10 percent of time CPU on average. I can't say that I've never noticed that before. My old Samsung laptop (which has integrated graphics rather than a dedicated card, to be honest) claims system interrupts doesn't take any time at all CPU. This seems to suggest a conflict any exist, and maybe that's why the drive is not recognized?

  Because Device Manager is not see it, I can't check for updated drivers.

  Because disk management can't see, I can't format / partition / assign a drive letter.

  The BIOS does not let me do anything with the drive, go into properties or disable / re-enable, or something like that.

  Can anyone suggest what I might have missed in the configuration, or what I can do to fix this?

  Thanks in advance.

  Unfortunately, I can't find a downloadable diagnosis for your laptop. Try Seatools. Seagate website has a download, that you can use to create a CD bootable or flash player to test hard drives.

  I just want to see if a tool outside Windows can detect the drive and all the problems.