Redundancy of the TMS with TMSXE

Similar Questions

• Allow outgoing SIP URI dial on the TMS system Type: room

  Hello

  I ve added a VC-end point unsupported to the TMS with system Type: room.

  If I check the planning parameters on MSDS for this endpoint, I see that I can only plan entering, but not outgoing calls.

  We´re with the help of BBFRR and if I book this endpoint in a Multipoint meeting, I get an error of TMS routing, because the outgoing call missing clearances characteristic.

  Is there a way to activate the planning coming out for this type of endpoint?

  Is it possible to configure the device manually type for example in the MXP880 to get the outbound features?

  Is there maybe a flag in the comic book, were I can define the type of device manually?

  Thank you

  Tino

  System of 'room' type is intended for endpoints that TMS does not support, but which can be saved to the guardian or register SIP (and therefore be composed by any other endpoints). MSD cannot control endpoint, it cannot force the end point to dial a number to someone, but logical routing TMS allows incoming calls, because it assumes that the doorman / SIP registrar can route calls to it.

  Makes sense?

• Purge schedule on the TMS/TMSXE

  TMS is 14.3.0

  TMSXE is 3.1.2

  We gave up on the recording of our telepresence on the CUCM, we work to keep away them from the CUCM and their inclusion in the VCS - C (see here). But when you remove the CUCM non-registrant endpoints off the TMS and add it as registered endpoint C - VCS, TMS causing problems on all scheduled meetings.

  After the now the rebinding VCS - C saved telepresence endpoints for room calendar changes in the TMSXE, it

  1. Add the 'new' (actually modified) end for the calendar of meetings
  2. maintains endpoint (previously saved CUCM) former listed as a "shadow" unknown endpoint
  3. clear the multipoint resource MCU/TP server allocated meeting
  4. send an email to the host of the meeting, saying: "information your administrator is migrating to a new system of conferencing reservations." During the migration, your conference was made. Cautions due to limited resources of routing, automatic routing could not be set up for your conference. A participant dial-in/out external added to the call is not connected. To ensure that the Conference will connect and the delivery of resources are available, contact your administrator to videoconferencing. Road is not valid.

  But all meetings are internal, and there are many resources available on the telepresence Server

  I wonder if there is a way to solve this problem and what we should do. Is there a way to purge all the TMS meetings so that the TMSXE re - synchronize all the information meeting of the TMSXE.

  Hello

  There is unfortunately no history of migration in TMS between a CUCM-centric and a deployment centered on VCS. If you make a change like that, you essentially need to manually update all future bookings.

  Kind regards

  Kjetil

• New Migration TMS with an old backup of the old server for TMS

  Hi all

  Since the Migration of data to the new server of TMS with the old backup of TMS old we have problems to access the MSDS server over https.

  Could be the reason of this problem, the old database movement?

  I checked all the Services of the Windows Server Manager 2008\ IIS and all other services, but without success.

  Is perhaps a few services that I forgot? Or other things?

  I thank for your feedback

  Solved

  HTTPS was not enabled in IIS on the server. Created a self-signed certificate and limits only the default Web page and it worked fine, locally and externally.

  / Magnus

• Problem with the commissioning of Web check-in and ASK when swicht to the TMS Provisioning extend mode

  Hi, I need help please, because I have no contract and I cannot open a TAC case.

  I have the following two issues:

  1. when I do the tms extension preparation mode switch as stop working sip calls, I get the following error of internal and internet scenarios for my internal network:

  VCS-e when the call is the Internet to the internal network

  2013-09 - 05T 11: 50:38 - 04:30

  "" "" "" "TVCS: event = 'Search is complete" reason ="authorization not valid - insufficient privilege" Service = "H323" type-aliases-Src ="E164" CBC-alias = '7449"Dst-alias-type ="H323"Dst-alias ="anthony_accardi"call-number ="1a069dfa-1647-11e3-86f9-0010f328943a"Tag ="1a069f44-1647-11e3-b22f-0010f328943a"detail ="found: fake, searchtype:ARQ"Level ="1"elements UTCTime = '2013-09-05 16:20:38, 670"

  VCS - c when the call is internal network to the Internet:

  2013-09 - 05T 11: 53:31 - 04:30

  "" "" "" "TVCS: event = 'Search is complete" reason ="prohibited" Service = "H323" type-aliases-Src ="E164" CBC-alias = '7429"Dst-alias-type ="H323"Dst-alias ="vianyfel_cordaro"call-number ="812a5198-1647-11e3-ba89-0010f325da04"Tag ="812a52e2-1647-11e3-93c9-0010f325da04"detail ="found: fake, searchtype:ARQ"Level ="1"elements UTCTime = '2013-09-05 16:23:31, 687"

  2013-09 - 05T 11: 53:31 - 04:30

  "" "" "TVCS: Event = 'research has attempted" Service ="H323" CBC-alias-type = "E164" CBC-alias ='7429"Dst-alias-type ="H323"Dst-alias ="vianyfel_cordaro"call-number ="812a5198-1647-11e3-ba89-0010f325da04"Tag ='812a52e2-1647-11e3-93c9-0010f325da04" detail = "searchtype:ARQ" Level = "1" elements UTCTime ='2013-09-05 16:23:31, 680"

  2013-09 - 05T 11: 53:23 - 04:30

  "" "" "" "TVCS: event = 'Search is complete" reason ="prohibited" Service = "H323" type-aliases-Src ="E164" CBC-alias = '7429"Dst-alias-type ="H323"Dst-alias ="vianyfel_cordaro"call-number ="7c9181c4-1647-11e3-bda8-0010f325da04"Tag ="7c918304-1647-11e3-865b-0010f325da04"detail ="found: fake, searchtype:ARQ"Level ="1"elements UTCTime = '2013-09-05 16:23:23, 974"

  BUT WHEN THE MODE IS AGENT LEGACY TMS ALL THE CALL WORKS FINE

  2 when I switch I can tms mode of preparation I can do internal network equipment supply but not from the outside and this worries me more is the jabber that being Internet I get the following error:

  013 09 - 05 T 11: 07:42 - 04:30	"" "" TVCS: elements UTCTime = '2013-09-05 15:37:42, 263"Module ="network.sip"Level = 'INFO': Src - ip ="192.168.0.252"Src-port ="25084"detail = 'receive the Request OPTIONS = method, Request-URI = sip: 192.168.0.250:7001; transport = tls, [email protected] / * /"
  2013-09 - 05T 11: 07:42 - 04:30

  "" TVCS: elements UTCTime = '2013-09-05 15:37:42, 261"Module ="network.sip"Level ="DEBUG": Dst - ip ="192.168.0.252"Dst-port ="25084"
  SIPMSG:
  | SIP/2.0 401 Unauthorized
  Via: SIP/2.0/TLS 192.168.0.252:5061; branch = z9hG4bK4de281330ed1277914e57a4bb98ac81416134; received = 192.168.0.252; rport = 25084
  Call ID: [email protected]/ * /.
  CSeq: 38570 OPTIONS
  Starting at: ; tag = 21e96c96b3f9a439
  To: ; tag = ba0e03ca2f6b3957
  Server: TANDBERG/4120 (X7.2.1)
  WWW-Authenticate: Digest realm = "TraversalZone", nonce = "b40cb8278b4a11da992154324161d566d2b57bac3d83c5c518c4528c790d", opaque = "AQAAAN1NC9IHdFS3kNJ3Q6UX2JiBXhut", stale = FALSE, algorithm = MD5, qop = "auth".
  Content-Length: 0

  |

  2013-09 - 05T 11: 07:42 - 04:30

  "" "" TVCS: elements UTCTime = '2013-09-05 15:37:42, 261"Module ="network.sip"Level = 'INFO': Dst - ip ="192.168.0.252"Dst-port ="25084"detail ="sending = 401, method = OPTIONS, To = sip response Code: 192.168.0.250:7001, [email protected] / * /"

  2013-09 - 05T 11: 07:42 - 04:30

  "" TVCS: elements UTCTime = '2013-09-05 15:37:42, 261"Module ="network.sip"Level ="DEBUG": Src - ip ="192.168.0.252"Src-port ="25084"
  SIPMSG:
  | Sip OPTIONS: 192.168.0.250:7001; transport = tls SIP/2.0
  Via: SIP/2.0/TLS 192.168.0.252:5061; branch = z9hG4bK4de281330ed1277914e57a4bb98ac81416134; received = 192.168.0.252; rport = 25084
  Call ID: [email protected]/ * /.
  CSeq: 38570 OPTIONS
  Starting at: ; tag = 21e96c96b3f9a439
  TO:
  Max-Forwards: 0
  User-Agent: TANDBERG/4120 (X7.2.1)
  Support: com.tandberg.vcs.resourceusage
  Content-Type: text/xml
  Content-Length: 250

  25075024960|

  2013-09 - 05T 11: 07:42 - 04:30

  "" "" TVCS: elements UTCTime = '2013-09-05 15:37:42, 261"Module ="network.sip"Level = 'INFO': Src - ip ="192.168.0.252"Src-port ="25084"detail = 'receive the Request OPTIONS = method, Request-URI = sip: 192.168.0.250:7001; transport = tls, [email protected] / * /"

  2013-09 - 05T 11: 07:36 - 04:30

  "" "" "TVCS: elements UTCTime = '2013-09-05 15:37:36, 757" Module ="network.tcp" Level = "DEBUG": Src - ip = "10.10.10.1" Src-port ="10191" Dst - ip = "10.10.10.10" Dst-port ='5060"detail = 'TCP connection is closed"

  2013-09 - 05T 11: 07:36 - 04:30

  "" TVCS: elements UTCTime = '2013-09-05 15:37:36, 641"Module ="network.sip"Level ="DEBUG": Dst - ip ="10.10.10.1"Dst-port ="10191"
  SIPMSG:
  | SIP/2.0 404 not found
  Via: SIP/2.0/TCP 201.210.111.54:2379; branch = z9hG4bK5fc6a3c5021e3557216ef01c2434fb00.1; received = 10.10.10.1; rport = 10191; DefaultZone = ingress-box
  Call ID: [email protected]/ * /.
  CSeq: 301 SUBSCRIBE
  From: <> [email protected] / * />; tag = 2991aa56d191ede3
  To: <> [email protected] / * />; tag = c4114db76ace49d8
  Server: TANDBERG/4120 (X7.2.1)
  WARNING: 200.11.230.253:5060 399 'political response '.
  Content-Length: 0

  |

  2013-09 - 05T 11: 07:36 - 04:30

  "" "" TVCS: elements UTCTime = '2013-09-05 15:37:36, 641"Module ="network.sip"Level = 'INFO': Dst - ip ="10.10.10.1"Dst-port ="10191"detail = 'send = 404, method = SUBSCRIBE, To = sip response Code: [email protected] / * /, [email protected] / * /"

  2013-09 - 05T 11: 07:36 - 04:30

  "" TVCS: elements UTCTime = '2013-09-05 15:37:36, 638"Module ="network.sip"Level ="DEBUG": Src - ip ="10.10.10.1"Src-port ="10191"
  SIPMSG:
  | Sip SUBSCRIBE:[email protected] / * / SIP/2.0
  Via: SIP/2.0/TCP 201.210.111.54:2379; branch = z9hG4bK5fc6a3c5021e3557216ef01c2434fb00.1; received = 10.10.10.1; rport = 10191
  Call ID: [email protected]/ * /.
  CSeq: 301 SUBSCRIBE
  Contact: <> [email protected]/ * /: 2379; transport = tcp >
  From: <> [email protected] / * />; tag = 2991aa56d191ede3
  To: <> [email protected] / * />
  Max-Forwards: 70
  Directions:
  User-Agent: TANDBERG/774 (4.6.3.17194 PCS) - Windows
  Expires: 300
  Event: ua-profile;model=movi;vendor=tandberg.com;profile-type=user;version=4.6.3.17194;clientid="S-1-5-21-1078081533-484061587-725345543";connectivity=1
  Accept: application/pidf + xml
  Content-Length: 0

  The setup I have is:

  

  Configuration on VCS Expressway:

  TMS Agent Legacy mode

  Search rule:

  local area-no domain

  Any

  Any

  NO.

  Alias matching

  Regex

  (. +) @domain.com. *.

  Replace

  Continue

  LocalZone.GetDaylightChanges

  local area full URL

  Any

  Any

  NO.

  Alias matching

  Regex

  (. +) @domain.com. *.

  Leave

  Continue

  LocalZone.GetDaylightChanges

  Search of covered area rule

  Any

  Any

  NO.

  Any alias

  Continue

  TraversalZone

  Search for DNS zone rule

  Any

  AllZones

  NO.

  Alias matching

  Regex

  (?. *@%localdomains%.*$).*)

  Leave

  Continue

  DNSZone

  Transform

  Transform the alis destinations to URL

  ([^@]*)

  Regex

  Replace

  ------[email protected] / * /

  Presence PUA - on

  Presence server - off

  CONTROL VCS:

  TMS Extension commissioning of fashion

  Search rule

  local area-no domain

  Any

  Any

  NO.

  Alias matching

  Regex

  (. +) @domain.com. *.

  Replace

  Continue

  LocalZone.GetDaylightChanges

  local area full URL

  Any

  Any

  NO.

  Alias matching

  Regex

  (. +) @domain.com. *.

  Leave

  Continue

  LocalZone.GetDaylightChanges

  Search of covered area rule

  Any

  Any

  NO.

  Any alias

  Continue

  TraversalZone

  External IP address search rule

  Any

  Any

  NO.

  Any IP address

  Continue

  TraversalZone

  Transform

  Transform the alis destinations to URL

  ([^@]*)

  Regex

  Replace

  ------[email protected] / * /

  PUA - on

  presence server - on

  I do not have political appeal hace

  Please help me to see what I'm missing or what's wrong?

  Thankss

  Hello

  Ok. Are you saying that VCSe uses the IP address 10.10.10.10 in interface external, right? Of course, what the IP address of 200.x.x.x? It's your VCSe NAT IP address, right? What is this configured in VCSe?

  Well, reaally you have a problem of NAT. look at the SUBSCRIPTION message of jabber to VCSe:

  SIPMSG:

  | Sip SUBSCRIBE:[email protected] / * / SIP/2.0

  Via: SIP/2.0/TCP 201.210.116.201:3612; branch = z9hG4bK138dca6bf6cdd458588900dbaf7b45f4.1; received = 10.10.10.1; rport = 9368

  Call ID: [email protected]/ * /.

  CSeq: 301 SUBSCRIBE

  Contact:

  From: [email protected] / * />; tag = 1e82c817dc3224d5

  In: [email protected] / * />

  Max-Forwards: 70

  Directions:

  User-Agent: TANDBERG/774 (4.6.3.17194 PCS) - Windows

  Expires: 300

  Event: ua-profile;model=movi;vendor=tandberg.com;profile-type=user;version=4.6.3.17194;clientid="S-1-5-21-1078081533-484061587-725345543";connectivity=1

  Accept: application/pidf + xml

  Content-Length: 0

  Do you see? If the Red 192.168.41.205 IP address is the IP address of your router/nat, then you can come to the conclusion that your router is inspection/ALG, it puts its own IP address in the SIP headers. Your router/firewall device should not use any function ALG/inspection, otherwise you will have problems.

  I can say with great confidence, VCSe rejects the message SUBSCRIBE "404 not found" response because VCSE does not recognize this IP address in the field 'road', 192.168.41.205.

  In addition, the configuration of your NAT is not recommended. First, you use the port-based NAT (PAT), in fact, you must use a NAT. Second, when your NAT firewall allows VCSe, the source address is 10.10.10.1, which means that your firewall is NATing the source address and destination address not only. This type of NAT, it is not recommended for h.323/SIP applications.

  Well, don't be angry with me, I try to help, but I need to say, your deployment VCSe is almost completely false, there are a lot of blind spots.

  I suggest reviewing and reconfigure your deployment following this guide:

  http://www.Cisco.com/en/us/docs/Telepresence/infrastructure/VCs/config_guide/Cisco_VCS_Basic_Configuration_Control_with_Expressway_Deployment_Guide_X7-2.PDF

  I hope this helps.

  Concerning

  Paulo Souza

  My answer was helpful? Please note the useful answers and do not forget to mark questions resolved as "responded."

• schedule meetings with the TMS and CTManager on the same endpoint

  Hello everyone

  I explain my problem, we have a CUCM with CTManager to plan meetings of the CTS, we have 2 VCS with a TMS to plan meetings of TC endpoints also.
  Our TC end points are saved in venture capital using H323, recorded in CUCM using SIP and exchange of email to can program using the CTManager. And TC endpoints are supplied by our TMS.

  As endpoints of TC may appeal to the endpoints CTS sometimes we have meetings planned between TC and CTS endpoints in the CTManager, but if schedule us a meeting by using the TMS, meetings of CTManager disappear and endpoint show TMS meetings, if we do a resynchronization of the electronic mail room in the CTManager We can see again in the meetings of CTManager in the touchscreen.

  We tried not to allow bookings for this endpoint of TC in the TMS, but later there is no way to schedule a meeting for this endpoint, even using the external call.

  You know any workaround solution to activate the two calendar options running on the same endpoint without removing the CTManager meetings? We don't need the BBFRR for the TMS meetings, only for meetings of the MLC.

  Best regards

  Hello

  Disabling power of the TMS write calendars 'Meetings' on managed systems is not supported. If an endpoint is added to the TMS, TMS assumed that endpoint is not used in another system of planning (such as CTS - man) and could replace any parameter that depends on the other system of planning.

  Kind regards
  Kjetil

• Integration of TMS with Evoko Room Manager

  Hi Experts,

  Could if it you please let me know if activated VC rooms which exists in the TMS can be integrated with Evoko Room Manager.

  If so, how and what are the requirements?

  If I do not set up the TMSXE with TMS, will walk or not?

  All other views?

  Thank you

  Saurabh

  Hi Slim

  I read the Evoko Room Manager administrator guide so basically it's the knowledge that I have on the Evoko system. I have not tested with TMS, but it seems that it just connects to the server in sort of the same way the TMSXE. It monitors the booked rooms and display it on the screen that is mounted in the room.

  In my opinion, I think that this will not work with TMS what it itself, but it is possible that it will not work if you have installed TMSXE. Since when the room is reserved by a customer the Evoko outlook will see that this room is reserved for this time and display it on the screen. At the same time the TMSXE will also see that this room is reserved and create a conference for the video endpoint in this room as well. However given that I have not tested I do not know the limitations on that. I see that you can set how many chairs is available for this Evoko room and if you assume that the limitiation of participants for a meeting with this room included you may not be able to book the biggest number of participants at the video conference as you want.

  So I think that this requires some tests in order to be sure. I can't find any documents indicating that it works as expected.

  / Magnus

• I rebooted my machine yesterday and now when it comes to the screen with the scroll bar it restarts in loop. Impossible to enter Safe Mode (arrives at crcdisk.sys and while it recharges) or normal startup mode.

  I restarted my machine yesterday and now when it comes to the screen with scrolling bar (think Night Rider), it restarts in loop.  Impossible to enter Safe Mode (arrives at crcdisk.sys and while it recharges) or normal startup mode.  Startup Repair is unable to repair.  She argues that the onus of a BadPatch.

  Startup Repair shows the following:

  Problem event name: StartupRepairV2
  Signature of the problem 01: external Media
  Signature of the problem 02: 6.0.6000.16386.6.0.6001.18000
  03:6 problem signature
  Signature of the 04:262148 problem
  Signature of the problem 05: BadPatch
  Signature of the 06 problem: BadPatch
  Signature of the problem 07:0
  Signature of issue 08: 1
  Signature of the problem 09: SystemRestore
  Signature of the problem 10:0
  OS version: 6.0.6000.2.0.0.256.1
  Locale ID: 1033

  Hello

  I hope you made redundant data backups as I suspect that the drive has failed. If a PC, you must
  remove all power and remove and reinstall all the cables (at both ends where possible), memory and cards. Do
  not tighten, effectively remove and replace them with care.

  Click here for the manufacturer of your hard drive and launch their diagnosis on your drive.

  By manufacturer diagnostic utilities
  http://www.techsupportforum.com/hardware-support/hard-drive-support/302602-hard-drive-diagnostic-utilities.html
  SpeedFan
  http://www.almico.com/sfdownload.php

  HD Tune
  http://www.hdtune.com/

  ----------------------------------------------

  If necessary:

  You can try an In-Place Upgrade (hopefully save programs and data) or a repair installation (if all goes well
  saves the data, and you need to reinstall the programs). Be sure to do a good backup or three.

  You can use another DVD that are not protected but you will need to copy you have the product key.

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  If nothing works, you can make a repair facility that must save the data but you will need to
  Reinstall the programs. This also requires correct Vista disks especially for OEM versions. You will be
  need to know your product Code.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  How to perform a repair for Vista Installation
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  No new chances.
  Rob - bicycle - Mark Twain said it is good.

• Measures of software right for remove mSata 32 GB drive cache to replace the HDD with SSD.

  Hi, does anyone have instructions, or so point me to an article, to remove the disc from cache mSata original 32 GB configured to speed up drive HARD etc so the office strictly from the HARD drive boot can drive alone. I know that this implies the RST and possibly the BIOS settings. I'm looking for the exact steps that I had bad experiences removal (and adding) 32 GB mSata led cache in the past. System does not boot... Note I didn't need no guidance on physically remove the disk and for the curious once I have a clean boot of the only HARD disk I will clone the SSD (2.5 which I already have) so the 32 GB mSata is redundant and I would remove it completely. I am also interested by your experiences and/or complications in doing this. Thank you.

  These instructions may be of any Dell desktop, the office in question is a Dell XPS 8700.

  Hi all

  Here are the exact steps I used to replace a HARD drive accelerated with an SSD without any problem. It will probably work on most laptops and Dell desktop computers. In my case a Dell XPS 8700 running Windows Pro 64-bit 10.

  1 rapid Storage Technology, performance-> Disable Acceleration tab-> makes available.

  2. use DISKPART to CLEAN the drive 32 GB mSata.

  3. run msconfig.exe to set the mode to boot without failure, a minimum.

  4 stop.

  5. press F2 at startup to enter BIOS. Change to AHCI RAID. (probably not necessary, but I wanted that you never know what SSD tools may need).

  6 mine starts in Mode safe very well and it has changed Windows 10 AHCI RAID drivers automatically.

  7 run msconfig.exe to change normal startup.

  8 re-boot (started fine normal start-up).

  9. I then stop and removed the 32 GB mSata reader (you probably do this stage 4)

  10 success, XPS 8700 AHCI HHD boots without any problem.

  11. I then used Acronis True Image HD provided for free with the 1050 GB Crucial SSD to clone the 2 TB drive (650 GB used). Important do not use Acronis in Windows mode but create and boot from a bootable USB key. Community.crucial.com/.../172487

  12 put the SSD in a basket of 3.5 and swapped the HHD with the SSD. Now, it starts in a few seconds and not minutes after a Windows 10 update!

  It worked for me, but obviously not guaranteed to work for you...

• C20/SX20: is there a way to get the cdr with loss/jitter of the stats?

  I'm trying to get a report with loss/jitter, but doesn't cdr can not find a way to do it.

  (a) TMS is able to report COR but only on the participants/duration/encryption/protocol of appeal

  (b) C20 web gui has information but only with a number of clicks on and only for a call each time

  (c) API C20 (cli) I found some commands, but nothing for the loss/jitter
  I tried xstatus Diagnostics appeal channels-> only for calls in progress.
  tried xHistory recent CallLogs | Call-> nothing usable

  Is it possible to get the cdr with jitter/loss for each C20/SX20 counters in a framework?

  Methods to obtain these data is exactly what you have listed and must be carried out during the call.

• Exception of HTTP after migrating TMS with TMSPE

  Migrated 13.2 TMS with TMSPE physical server in VM 2008R2, which went well, however, VCS - C is now sent me some exception HTTP State for all services supply; users, directories, and devices.

  Status: failed

  Answer: HTTP Exception

  Reason: HTTP error (400): WWW-Authenticate

  And yet, diagnostics in TMS TMSPE shows no alarm; It's all green.

  However, TAC is working on it.

  Someone at - he seen this before?

  /Jens

  Thanks for the clarification, Jens and I'm talking internally for all involved here because it seems we have "several hands in the kitchen" (as well as the different cuisines) concernng this one... which means that we will use the official channels for troubleshooting it and we'll just update this thread with leading... agreed?

• ICS error - "the service of the redundancy or the grope does not start.

  These days I was facing this problem on ICS. Whenever I try to share my internet connection with wifi, it gives an error saying: "the service of the redundancy or the grope does not start" I have reset the connection, disable on surroundings & & restart the system as well, but not the changes even error every time. Is there someone can help on this desire to please much appreciated.

  Hi kaliszewski,.

  Welcome to the Microsoft Community and thanks for posting the question.

  According to the description, it looks that you are facing with Internet connection sharing problems.

  Please follow the steps mentioned below that can help us to solve the cause of the problem.

  Method 1:

  Maybe not all services that run the Internet (ICS) ICS are enabled. I suggest to start over and make sure that the underside of addiction services are activated.

  1. click on Start, run, type services.msc and click OK.

  2. to activate a service, find in the right pane and double click on its entry.

  3. make sure that the Startup Type is set to Automatic , and then click OK.

   

  All the following services must be so configured to use ICS:

  Application Layer Gateway Service
  Network connections
  Knowledge of the network (NLA) locations
  Plug-And-Play
  Remote Access Auto Connection Manager
  Remote Access Connection Manager
  Remote procedure call (RPC)
  Telephony

  After checking and automatic startup for each of these services configuration, close the Services window and restart the computer before trying again to enable ICS.

  Method 2:

  To disable and then re-enable the Internet connection sharing on the Internet connection of the Windows 7 computer. If it asks you to select a private network connection, select the one that connects to the hub. Check the connections to the LAN on each computer:

  1. Press Windows Key + R.
  2. Type ncpa.cpl in the box and press enter.
  3. Right click on the connection to the local network, and then click status.
  4. Click on Details. It should show these values:
  • IPv4 address: 192.168. *. *
  • IPv4 subnet mask: 255.255. *. *

  If the values are not good, Internet connection sharing is not configured correctly.

  You can also consult the following link for troubleshooting Internet connection sharing problems:

  http://Windows.Microsoft.com/en-us/Windows7/using-ICS-Internet-connection-sharing

  Hope the above caliper problems

  If you need further clarification or additional assistance, please let us know, we will contact you as soon as possible.

  Thank you.

• Integrate TMS with WebEx through a proxy

  I'm testing our new server (version 13.2.2). TMS

  In the Administrative Toolsin->Configuration-> menusettings of the Conference on MSDS, it is possible to configure the WebEx service information. What I did.

  However, it still fails to connect. I think it's because he's trying to connect directly as all connections must go through our web proxy.

  Is it possible to configure the TMS through a proxy for integration with WebEx?

  Hi Matthew,

  Negative about your question and in fact, TMS dislikes proxies at all. Therefore, to try something like that will give you all sorts of questions eventually.

  Keep in mind, and in TMS 13.x.x, this is v1 of Webex. And keep in mind and as announced in the TMS 14.1 release notes, Webex v1 with S & S and LiveMeeting TANDBERG is now gone TMS 14.1 in preparation to support Webex v2. Therefore, if you plan to use Webex v1, then you will stick with TMS 13.x.x.

  Rgds,

  Dale

• Replace the TMS device

  Hi all

  I only appliance TMS with VCS and TMSagents (applications MOVI), then my TMS has error and had to be replaced by a new.

  is there any procedure to do this replacement for the TMS have TMSagents with VCS to ensure that replication will not be problem. Sorry, I just worriying on replication to be failed.

  because I have a large number of users MOVI.

  Thank you all

  Hello Kalinda

  What kind of error you see on the server of TMS? Maybe the ist possible to fix it?

  Before you replace your server TMS device, you need schedule downtime for maintenance.

  You should back up your sql database and the agent MSDS database. Then install the new TMS server with the corresponding version of the former and restore and backup agent MSDS database. You can then enable replication again.

  Keep in mind that the TMS appliance server is EOL and EOS, but also you can be able to take advantage of the Cisco migration program.

  Please visit this link:

  http://www.Cisco.com/en/us/prod/collateral/ps7060/ps11305/ps11316/ps11338/end_of_life_notice_c51-683062.html

  Concerning

  Rafal

• Reports on the TMS - network packet loss

  Hello world

  I'm seeing packet loss reports in TMS, but there is no info here.

  My network is: VCS 7.0.2 movi, c20 and ex60 registered (SIP) as well as a TMS 13.1.2.

  The vcs is a starter pack and the TMS is the demo version. I first registered endpoint of the vcs and then added the TMS to the network. I have the endpoints addition and vcs to TMS. In TMS, I see the endpoints and the news on their topic, but unfortunately no information in the report of packet loss. I made a call between movi and c20 with packet loss, but no info has been shown in the report.

  I am very new to the TMS, and I wonder if there is something I should be doing in order to make endpoints send info packet loss to TMS.

  I sshed in endpoints and I can see the info on packet loss and jitter through the api.

  Described above is my test network on which I can make prety much all about. I also have the same problem (this time with EX60 endpoints, control VCS and TMS) on a network of clients and on this network that I really need this job.

  Any help would be appreciated. Form what I read end points to send this info by HTTP to MSDS. Am I wrong?

  Thank you for your help.

  Hello

  Endpoint to send your comments to tms on http Yes. I'm not at the office and this cannot be verified at the moment, but I don't know if devices running software like c-series and ex support tc this packetloss reports, I know the MXP legacy for this. If anyone can check it out that would be great. If this isn't the case, I will check it tomorrow.

  At least, you can check that endpoints send your comments to the tms at all looking at the system in the browser tab newspapers.

  Check the trap logs. If you see connect and disconnect traps here, feedback should work.

  /Magnus

  Sent by Cisco Support technique iPhone App