Integration of TMS with Evoko Room Manager

Similar Questions

• CRM integrated with MS Project Management

  Hi Expert,

  On the CRM integrated with MS Project Management, there any company always do this?

  In fact, there are only certain configurations or it's really complicated customization?

  The result of the integration is really effective and efficient?

  Can share with me the practice of MS Project to the planning of resources management?

  Thank you!

  Hello

  The question you posted would be bettersuited in the TechNet Forums. I would recommend posting your query in the TechNetForums for more assistance:

  http://social.technet.Microsoft.com/forums/da-DK/projectserver2010general/threads

• vCOPS integration with vCenter Configuration Manager

  Hello

  I have a problem with the integration with vCenter Configuration Manager vCOPS.

  When I try to save vCCM in vCOPS prividing on 100% correct settings, I get an error:

  Cannot save vCenter Configuration Manager system: Details: unable to connect to the instance of VCM target.

  In fact I don't know yet where to look for more information about the error.

  Kind regards

  Sebastian

  I posted some information on this point - is useful.

  StorageGumbo: VCM server registration for Ops VAPP 5.6 vC

• Integration of TMS Cisco with Microsoft office 365

  Are there other APIs of reservation positions are to integrate the Cisco TMS with Microsoft office 365?

  In short, no.. Booking API is the only API document us and support.

• New Migration TMS with an old backup of the old server for TMS

  Hi all

  Since the Migration of data to the new server of TMS with the old backup of TMS old we have problems to access the MSDS server over https.

  Could be the reason of this problem, the old database movement?

  I checked all the Services of the Windows Server Manager 2008\ IIS and all other services, but without success.

  Is perhaps a few services that I forgot? Or other things?

  I thank for your feedback

  Solved

  HTTPS was not enabled in IIS on the server. Created a self-signed certificate and limits only the default Web page and it worked fine, locally and externally.

  / Magnus

• Allow outgoing SIP URI dial on the TMS system Type: room

  Hello

  I ve added a VC-end point unsupported to the TMS with system Type: room.

  If I check the planning parameters on MSDS for this endpoint, I see that I can only plan entering, but not outgoing calls.

  We´re with the help of BBFRR and if I book this endpoint in a Multipoint meeting, I get an error of TMS routing, because the outgoing call missing clearances characteristic.

  Is there a way to activate the planning coming out for this type of endpoint?

  Is it possible to configure the device manually type for example in the MXP880 to get the outbound features?

  Is there maybe a flag in the comic book, were I can define the type of device manually?

  Thank you

  Tino

  System of 'room' type is intended for endpoints that TMS does not support, but which can be saved to the guardian or register SIP (and therefore be composed by any other endpoints). MSD cannot control endpoint, it cannot force the end point to dial a number to someone, but logical routing TMS allows incoming calls, because it assumes that the doorman / SIP registrar can route calls to it.

  Makes sense?

• Integration of EBS with SSO/OID/OAM

  People - I did not understand if this is the right forum to post.
  
  We run 12.1 E-business - and have enabled SSO using the normal route of authentication OID/LDAP in AD from a server Linux X 86 - 64
  
  While we run E-Business on linux Z, the SSO/OID instance is running on a stand-alone server for x 86-64 linux.
  
  My question is this - is being replaced by Oracle Access Manager (11g) SSO?
  
  Also the application server is being deprecated in favor of Weblogic server for forms and reports in the E-Business Suite for future versions?
  
  If I'm level OID 10.1.4.3 to OAM 11 g, everyone sings the steps successfully... There is a lot of information available on 1304550.1, 876539.1, 975182.1 and 1286596.1. These documents, however, take you in circles...
  
  Can someone who has just experienced a succesfull install and integration in E Business Suite, point me in the right direction?
  
  Thank you

  My question is this - is being replaced by Oracle Access Manager (11g) SSO?

  Migration Oracle Single Sign-On 10 g (10.1.4.3) 3 to Access Manager Oracle 11 GR 1 material with Oracle E-Business Suite [ID 1304550.1]
  Procedure step by step to integrate E-business suite with Oracle Access Manager. [832456.1 ID]
  Integration of Oracle E-Business Suite with Oracle Access Manager 11 g using Oracle E-Business Suite AccessGate [1309013.1 ID]

  .. I see that you already have the docs referenced in your post!

  Also the application server is being deprecated in favor of Weblogic server for forms and reports in the E-Business Suite for future versions?

  An overview of the E - Business Suite 12.2: WebLogic Server and online marking
  http://blogs.Oracle.com/stevenChan/entry/glimpses_of_e_business_suite

  If I'm level OID 10.1.4.3 to OAM 11 g, everyone sings the steps successfully... There is a lot of information available on 1304550.1, 876539.1, 975182.1 and 1286596.1. These documents, however, take you in circles...

  Can someone who has just experienced a succesfull install and integration in E Business Suite, point me in the right direction?

  You already have the docs - I don't him not get tired myself.

  Thank you
  Hussein

• How to remove an application from a device with the Profile Manager?

  I use iOS devices 9.1 in collaboration with Apple Configurator 2.1 and 5.0.15 Profile Manager. Configurator locks iPads and the Profile Manager is used for the distribution of applications. We are assigning apps in device that is a great feature. However, when I delete an application from a device with the Profile Manager, the application does not remove himself. The Profile Manager back the license and I can redistribute app for iPad one another even if the application is still installed and usable on the iPad first.

  Is this a bug? It seems that it should remove the app. If I delete the management profile in distance from the unit, it removes apps.

  Click on the gear box and then delete Apps and select the application you want to remove.

  Initially, I did what you did probably has been to select the name of the application, then press the 'less', who pulled out of the app in the list, but it has not removed the iPad, he just removed their license.  Through the gearbox and to remove it it removes of the iPad.

  You may have already thought of it, but I found this post unanswered after two months, and once I found the answer, I thought I'd put it here.

• HP Pavilion dv6-6c29wm recover disc that was made with HP recovery Manager

  My HP Pavilion dv6-6c29wm recover disc that was made with HP recovery Manager

  Windows 7 64 - Bit on 650 GB of disk.

  Error: "the system support does not support this computer. You are not able to restore the system with the media. »

  I'm about to order the recovery disks from HP and with a bit of luck, being able to bring this notebook to conditioning factory with all the correct partitions and sizes, after that I have format the hard drive.

  Yes, our recovery disks will return your device to factory State. All the software that came with the unit will be resettled. What you have added, you have to reinstall.

• I accidentally used "OPEN WITH" and now everything opens with Microsoft Picture Manager, how to fix this?

  I accidentally used "OPEN WITH" and now everything opens with Microsoft Picture Manager, how to fix this?

  [Moved from comments]

  Right-click on a file, select open with, again, and select the appropriate program in the list.  Make sure that the checkbox "always use..." "is checked.

  Repeat for other types of files that are false

• Pavilion dm4 2191us: restoring a backup made with HP Recovery Manager - data recovery manager has since been removed

  My system (portable Pavilion dm4, Win 7 Home Premium x 64)) is works well but I would like to restore a backup of data made with HP Recovery Manager. HP Recovery Manager has since been removed from the system and I don't have a recovery disk. I tried to install sp45415 that supposedly runs a silent installation for the Recovery Manager program, but it fails silently on my system. The notes say that it applies to Windows 7 computers and the Pavilion dm1 and dm3. There is no mention of the dm4.

  Y at - there a trick to getting sp45415 to work properly?

  Y at - it somewhere that I can download an installation package for HP Recovery Manager that works on the Pavilion dm4?

  Is there another tool that can restore the backup made by HP Recovery Manager?

  Thank you!

  If you have uninstalled Recovery Manager he probably removed the recovery of files in the recovery partition. When these files are not deleted download Recovery Manager will install. You will need a recovery media to boot from to restore the files and the recovery partition. If you do not have a recovery media you order from HP.

  As for the files you are trying to restore - if it's a backup of personal files, photos, etc. to the outside hard disk or DVD must be a file .exe inside these files, probably of Restore.exe or Recover.exe. Double click on the .exe will extract files to a folder on the hard drive of your laptop.

• Error 907: This connection cannot be used with the VZAccess Manager

  original title: error message appear on my screen

  I get this error message appear on my screen every two seconds:
  "This connection cannot be used with the VZAccess Manager.

  Error 907 "

  Hello

  Disable/remove your Verizon Wireless software or contact Verizon for help with this error. Posts like this occur generally when third-party utilities are used to manage connections and issues must be resolved by the Distributor, because they are often specific to that software.

  Verizon support suggest that you go in the Options Internet/Control Panel and on the Connections tab, check the option "never establish a connection" is selected.

  Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org

• Should I uninstall the support help you provided with Open Essentials manage?

  could not find the answer to the question in the forums - should I uninstall support help Version 2.0.1.55945 I have installed with Open Essentials manage.

  It is still supported?

  Thank you

  Vikram

  Thank you for asking.  No, the SupportAssist version 2.0.1 you mentioned is the last for OME.   Version 1.0.1 mentioned in another post June 4 is for customers who are not already using SupportAssist of OME.

  Thank you

  John

• Exception of HTTP after migrating TMS with TMSPE

  Migrated 13.2 TMS with TMSPE physical server in VM 2008R2, which went well, however, VCS - C is now sent me some exception HTTP State for all services supply; users, directories, and devices.

  Status: failed

  Answer: HTTP Exception

  Reason: HTTP error (400): WWW-Authenticate

  And yet, diagnostics in TMS TMSPE shows no alarm; It's all green.

  However, TAC is working on it.

  Someone at - he seen this before?

  /Jens

  Thanks for the clarification, Jens and I'm talking internally for all involved here because it seems we have "several hands in the kitchen" (as well as the different cuisines) concernng this one... which means that we will use the official channels for troubleshooting it and we'll just update this thread with leading... agreed?

• SX 20 with Cisco Call Manager

  Dear team,

  If I add the SX20 with Cisco Call Manager, do I need to install the software cmterm - s52010tc6_2_1.cop.sgn the SX20. If this isn't the case, then what I have to do, I can see only administrator external field in my SX20, where I gave my callmanager IP address but it is not save.

  BR

  Hello

  In order to save the SX20 in CUCM you for CUCM version 8.6.2 or later, and your SX20 must be running TC5 version or a later version.

  This file you mentioned, cmterm - s52010tc6_2_1.cop.sgn, is just a upgrade file that you install on CUCM, so that CUCM can update your point of SX20 endpoint automatically. But you can upgrade your SX20 manually using the file s52010tc6_2_1.pkg.

  To get help on how to register to CUCM SX20, take a look at these guides with the name "administer endpoints TC on CUCM". The Guide according to the version of CUCM you run:

  http://www.Cisco.com/en/us/partner/products/ps11424/prod_maintenance_guides_list.html

  I hope this helps.

  Concerning

  Paulo Souza

  My answer was helpful? Please note the useful answers and do not forget to mark questions resolved as "responded."