Redundancy of WCS

Similar Questions

• WCS with Navigator company

  Hello

  I have the Enterprise WCS for 10000 AP license, the license is including WCS Navigator,

  now I would like to know what is the best practice to implement the WCS Navigator,

  I have 4 Windows 2003 2 corporate servers as active and 2 as secondary servers.

  Can I install Navigator on the WCS Server WCS?

  What server I need to install WCS Navigator?

  I have to install the browser as a separate server?

  I'm a bit confused with the design, kindly let me know if you find best practices,

  Not sure if you are aware (it is a fact that many people hurt including) but a 'sleep' WCS can be redundant for several active WCS "primary". So, you could have 2 active WCS and 1 backup. And WCS backup resumes with the correct database of active WCS which came down.

  So 2 WCS backup is really redundant :-)

  As far as I know, it's still not possible to have the browser in HA.

  And even! Browser does not really support WCS HA servers. This means that when the primary WCS are down, you then need to add the 'secondary' WCS, who took over from Navigator. This is no blocking, but it would have been nice to monitor the status of the WCS HA pairs in the browser. It is currently a feature request which is being developed for Navigator.

  Not sure if I understand the other part of your question but yes it is mandatory to have the 'secondary WCS' servers on separate physical servers as the primary. First because otherwise it is better the purpose of HA a bit and on the other hand because if a secondary is active, it can not be on the same server as one already active WCS.

  Nicolas

• Question of redundancy WLC

  Hello community,

  I have a question about the function of redundancy for both WLC 2106. We have installed on a client 2106 and 6 AP site 2 WLC primary and backup WLC works very well. No customer asks the question if there is an option to copy the guest user of wlan access from the PDC to the backup controller? The entry hall activates a new user on the main controller and if the primary controller fails, so the user did not have access to the WLAN comments.

  Any ideas?

  Thanks for help.

  René

  You can read this question a little differently...

  What, in my view, is mentioned, is that a user GUEST account is enabled on the PDC. When the primary contoller fails to the needs of the user to reauthenicate. If that is the question.

  You must either add comments on both controllers OR purchase WCS and WCS will push the guest on both controllers for you account...

• The upgrade to the will of the Sierra that software redundent

  Upgrade to Sierra will make it redundant software?

  Hello Robert,

  Thank you for using communities Support from Apple!

  I see Your ' e concerned about the software that you have installed on your Mac and its compatibility with macOS Sierra. You will need to check with the developers of the software that is installed to see if the version you have is compatible with macOS Sierra, or if there is an update available for her.  As a precaution, you can back up your Mac with Time Machine and then, if your software is not supported under macOS Sierra, just go back to your previous backup:

  Use Time Machine to back up or restore your Mac

  Take care.

• Redundant notifications watch OS 3 Countdown Timer

  Watch 3 OS, the countdown now redundant notifications. When the timer counts down to 0, you get the normal "meter made" alert and then 15 seconds later, you also get a notification of alarm named 'COUNT_DOWN_TIME_REACHED '. It doesn't seem to be a sign of timer settings in the application settings of the watch, so I can't understand how to disable this alert redundant and boring.

  Hello

  This seems to be a bug. You can report (as others have fact) to Apple here:

  https://www.Apple.com/feedback/watch.html

• Store steel 640GO - message data error (cyclic redundancy check)

  Hello

  I had the car store for a few months, so a lot of data on it.

  Today, windows detects it as a local disk and when I try to access it I get a message telling me that the disk must be formatted when I select number, I get a message saying * error (cyclic redundancy check *) data.

  Help.

  I tried two other laptops, both give the same answer.

  Thank you

  Guy

  Hello

  It seems that something go wrong with the HARD disk partition.
  Did you try running chkdsk and to check the external HARD disc ability?
  Do this!

  Startup command box (cmd)
  You can use the command: chkdsk c: /f r + +.
  But c: means that the HARD drive or partition, you need to change this with the same letter that is assigned to the external HARD drive

• Adding redundancy backup with time Capsules

  Are there problems associated with adding a second time Capsule to my system in order to add additional redundancy and safety of my backup options? I have a MacBook Pro and a single Capsule of 3 TB. I am looking for a non-Cloud option add extra security while maintaining the automation of the OSX TimeMachine.

  Adding a second Time Capsule works perfectly.  After that Time Machine performs a full backup of your Mac (s) on the new Time Capsule, it automatically alternates between two time Capsules backups.

  If you have the possibility of adding a USB or FireWire drive directly to your Mac, which would be a bit better set up in terms of reliability of time Machine, but probably not very convenient if you have a laptop that is moving all the time.

• redundant names of pxi resources

  Whenever I run a VI that accesses my digitizer PXI using the VI OR-SCOPE module I find myself with many redundant instances of the resource in PXI drop down menu resource. See the image attached to the binary "niScope Acquisition.vi EX" cover for an example of what I'm describing. Why does this happen?

  Thank you

  Eric

  

  It looks like niScope Close.vi is incorrectly called.  This is where the sessions are cleaned.

  Mark

• Cyclic redundancy

  Hello world

  I am trying to build a vi on CRC-5 (cyclical redundancy check). I looked here but found nothing on CRC - 5, just found it on CRC - 16.

  Can someone help me? Thank you!

  Here is a document that deals with CRC - 5.  You will probably have to do the 'big' yourself.

  BS

• Module Design triple redundancy

  Hello

  Someone has already tried to implement "Triple Module redundancy" on a map of FPGA? I have a PXI-7853R. I think I can support than a bit file. Yes, I could write three modules in a single bit file, but then, how do I control where on the FPGA would be built on each module.

  Any ideas?

  Thank you!

  I recently had a similar requirement. I just dropped 2 coppies double redundancy knowing they could be compiled twice but I had no control on where they have been compiled in. However, I found I could identify the IO pins and at least have the e/s of my redundant logic located in various locations through research in the file ucf for the fpga (who is with the labview fpga installation) and the xylinx fpga datasheet. I hope it's at least some use for you. Good luck.
  Michael

• 2012 server redundancy

  Hmmm, I'm a little confused that I don't see any option for this post in forum windows server 2012.

  In any case, I have a few questions about creating a backup for an all-in-one server. The server has active directory, DNS, file server, and everything on it. I am trying to create a configuration of redundancy in case of failure. While I was reading on the failover clusters and this seems to be what I need to do. I'm just a little confused.
  When I create a cluster and add servers to it, what happens exactly? For the simplest case instance, I have the main server with all the data. Now, I bring to another machine with nothing on it. I have install windows server 2012 on it and add, as well as the other computer in a cluster. The main server data automatically copied on all servers that are part of this group? At this point if a server goes down the other to take over?
  Any help is greatly appreciated.
  FlipFlop

  In the Windows Server forum:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer.

• Can I use Hype-V in a Cluster to ensure our application redundancy?

  Our application is software that contains several objects DCOM, web service and database. We develop a solution of redundancy of the complete system to provide the functionality of failover.

  Now, it looks like the use of Hyper-V in a Cluster is a more simple and better than our own solution. The application can be installed in the Hyper-V and failover can be provided by the cluster.

  Is there a limitation on this?

  Using windows api cluster, detectable application a failover operation when installed in a virtual machine of Hype-V that is taken in a cluster?

  Hello

  This forum is only for consumer Windows support. You should repost on this forum on the Microsoft Technet Web site: http://social.technet.microsoft.com/Forums/en-US/categories

• On Windows update kb2229593 cyclic redundancy error

  I am trying to install the update of security KB2229593 on a Win XP Home Edition PC.  I got an error that the update could not be installed, so I downloaded the update from the MSFT Download Center.  When I run it, I get an error saying "data error (cyclic redundancy check) I am assuming that it is a fairly major update.  Any ideas?

  Hey Pa Bear.

  I ran the disk check, and it seemed to solve all problems!  My security updates have been completed.  I really appreciate your help, but I think that chkdsk has been the answer.  Detective Conan for me.  Thank you again for taking the time to respond and offer to help.

• Message error when you install a game 'Assistant instalation "_" a support of instalation file not would be installed data error (cyclic redundancy check)

  It's the exact message

  "A support of instalation file cannot be installed
  Data error (cyclic redundancy check)

  This simply means that your CD/DVD media for the installation of your game is corrupted or cannot be read, extract for all the cracks, scratches on your support.

  If it is in perfect condition, better clean the lens of your CD/DVD-Rom drive with a cleaning kit, as the lens of the drive could have been contaminated by dirt.

• can I use a winxp installation code now redundant disk and product on another PC?

  I have a code disc and product installation WinXP of now redundant after upgrading my PC to WSindoes 7... I want to use the WinXP on another PC. Are there restrictions for me this way to use the facility?

  If you used a Windows 7 upgrade version to do the upgrade, XP Licensse is assimilated in it and cannot be used elsewhere.

  If your XP license is an OEM one (has a COA sticker on the case of the machine) may not be used in any other machine - never.