Check the peripheral post OfficeJet 6700

Similar Questions

• display the banner with officejet 6700

  I am trying to print on paper 8.5 x 28 inches on my Officejet 6700 Premium. I can't find a "banner" - size of page anywhere. And cannot do a 'custom' page longer than 22 inches.

  Thank you

  Hello

  The following is a list of all supported media formats:

  Supported media formats A4, A5, A6, B5 (JIS), 6 x 8 in., Executive, card 3 x 5 in, plug 4 x 6 in, sheet 5 x 8 in, A4, letter, 3 x 5, 4 x 6, 5 x 7 in., 13 x 18 cm, 8 x 10, 10 x 15 cm, L do, care Photo 2 L, 8.5 x 13 in, legal, letter , statement, O * beep * u Hagaki, Japanese postcard, envelope #10, envelope C5, envelope C6, envelope DL; Monarch envelope, card envelope 4.4 x 6 en, JIS #3 cabbage, cabbage #4 JIS   types of media plain paper, thick paper, bright white paper HP, HP Premium paper presentation, Matte, HP Premium Plus Photo paper, other inkjet papers Photo HP Advanced, HP Everyday Photo Paper, Matte, HP Everyday Photo Paper, photo paper glossy, other, other special papers , other greeting cards, paper Brochure HP, 180 g, ice, HP Brochure and flyer, Matte, HP Tri-fold Brochure paper, Matte, HP Tri-fold Brochure paper, brochure paper, glossy, other, ordinary hagaki, hagaki inkjet paper, card stock   media, recommended 60 to 105 g/m² (plain); 220 to 280 g/m² (photo); 75 to 90 g/m² (envelope); 163 to 200 g/m² (map)

  Source: http://www8.hp.com/au/en/products/printers/product-detail.html?oid=4323624#! = form tab

  I hope this helps.

  Kind regards.

• OfficeJet 6700: copies of bed duplex printing

  When I try to copy from the bed, my Officejet 6700, it prints both sides when I want to only print one side. I try to change the settings on the screen of the printer by going to settings: duplex and then only gives me the option of 1-original copy 2 sided faces. How can I change my settings to print single-sided?

  Thank you!

  Hi @onebusymom,

  Have you tried the deselection of the option "1-sided 2-sided original" (deletion of the box of the box).

  Otherwise, you can restore the default settings of the printer. On the front of the printer control panel select Setup > tools > restore defaults to reset the printer to its default settings.

  I hope this helps.

• upgrade to Windows 10 now printer HP Officejet 6700 Premium does not work.

  I have upgraded to Windows 10 earlier today and now the printer HP Officejet 6700 Premuim no longer works. I found it to bind, but he says it has been disabled. How do you get to work?

  Welcome to the HP community @Nanabirchleaves,

  I saw that your Officejet 6700 no longer works after upgrade to Windows 10, and I wanted to tender hand. Start with printer HP install wizard for Windows, that will find and install the correct drivers, you will need on Windows 10 for the printer running. Try printing and scanning then and let me know the result!

  Best wishes to you, I hope that I have led you in the right direction

  Display thanks to my answer for you help today by pressing the "thumbs up" icon below!

• OfficeJet 6700 Installation - error opening Installation log file

  Try to install the software for OfficeJet 6700.  All - tried delete reg keys, copy sw HD, download new drivers and run as administrator.  Have Win7 64 bit Professional OS. Windows doesn't have the driver get same error every time. "Error opening installation log file.  Verify that the specified log file location exists and that you can write to it. "Am about to return this article to Costco.  It can't be this hard!  What is the answer?

  Hey everyone - I finally understand how to solve this problem!  As they say, it's always the last place you are looking for!  All joking aside, this is how I did it.

  The problem is that HP setup.exe does not seem to be compatible with Windows 7 Professional 64-bit.  So, in short, the solution is to run the installer in compatibility mode Windows XP SP2.

  1. open computer and navigate to the Setup CD.

  2. do not Autorun or auto play installation.

  3. click right one open the CD from the computer.

  4 scroll down on the list of files on the CD until you see Setup with the HP logo next to it.

  5 right-click the program installation and in the context menu, select 'Troubleshoot compatibllty '.

  6. the resolution of the problems should open.  Select "try recommended settings.

  7. then, the troubleshooter should say it's solve problems and give you a button "Start the Program".  Click this button and the installation program should start normally.

  8. from here before the installation should work normally.  Although normal is sometimes nothing more than a laundry dryer set!

  My system is Windows 7 Professional 64 bit.  This kind of issue that happened to me in the past with other software installations, but I've never waited or he waits with a new HP printer!

  Thanks to the HP support people I talked about this during the last few days.  It is certainly something that should be documented. I hope that this article here will help others.  Let me know if it helps you!

• OfficeJet 6700 premium print date and time on the fax history report

  Running Windows 8.1 on my OfficeJet 6700 Premium AIO H711n fails to print the date and time on the historic report of the fax.  I need this information to check the box of cylinder head of the fax the documents have been sent.

  Hello dcflorida,

  I did not the 6700 but on another machine, I had to 'reset', time and date in the printers preferences.

  If you haven't done it yet, go to Settings/preferences/time and Date on the All in One printer set up (once again if necessary).

  IF your machine does not have the time / date on the history report, it includes it in the Confirmation page?

  Here is the link to the Manual too.

• HP Officejet 6700: Officejet 6700 constantly "checking device.

  My Officejet 6700 premium is connected wireless to my home network.  I have a strong signal to the printer. I have a desktop computer and a laptop running Windows 8.1 and a laptop running Windows 7. The printer ALWAYS shows (for over a week now) reads, "checking device. This process may take several minutes. Not turn the unit off, do not open or close the doors.  It will print a page or two, but if the print job is on 3 pages (or I wrap several jobs page) it leaves impression and gives me an error. My inclination is to unplug the printer to reset it and see if that fixes the problem, but the display says specifically not to do.  I pressed the Red "X" next to the screen, but the screen says while the verification process can no longer be interrupted.  Help!

  That fixed the problem of 'Device of control...' » !  Here is what happened:

  (1) when I open the print cartridge door, the screen has said, "the door is open, etc" then when I closed the door the printer returned to 'control device '. »

  (2) when I hit the power button the display text, "maintenance cannot be stopped."  (She seemed very confident of this. Maybe she didn't know she could be disconnected.)

  (3) I have disconnected the power cord at the back and the decision-making and let stand for a few minutes, then plugged into the printer, then exit. The printer is back and initialized itself and then raged at me to unplug his: "Use the power button to turn off, do not use a power strip, etc."

  Thank you!  However, it always not print an entire document.  I tried to print a doc of a page in five copies and printed four and a partial, then gave an error.  Any ideas with this problem?

• OfficeJet 6700 Premium: Unable to connect to the server

  I used my 6700 for almost a year and a half to work on a secure server of company where I couldn't use many features. I recently brought home, and now I use it on my personal network of houses. I followed the instructions on reprint the code of request but were unsuccessful. I constantly get a message that my printer is unable to conect to the server. My network wireless printing has been set up and I was able to print from my phone, laptop, & office. Can someone help me please my claim code?

  Hey @bhigh904,

  Welcome to the Forum from HP Support.

  I see that you are unable to activate the services Web on your HP Officejet 6700 Premium e-all-in-one printer. I would like to help.

  When users encounter this type of problem, I usually suggest from scratch with the radio of the printer and webservices configuration.  You can clear all of these parameters in a swoop by the factory default restore * your printer.

  Here's how:

  * Note that this step resets the setting up your printer wireless, address ePrint and other custom print settings. If you have created a custom address @hpeprint.com it is permanently erased. For more information about custom addresses ePrint, click here.

  • The printer's front panel, press the Setup/key icon and then tap tools
  • Select Restore to factory settings

  Then, touch the wireless icon () and run the Wireless Setup Wizard to restore your network connection.

  Make a note of the IP address of the printer.  Then, follow these steps to configure a manual DNS:

  • Enter the printer's IP address in a web browser (Chrome, Firefox, Safari, Internet Explorer) and press ENTER to go directly to this page.
  • Click the network tab.
  • In the submenu on the left, click Networking.
  • Then click on the network (IP) address.
  • Click Manual DNS server.
  • DNS preferred as 8.8.8.8 manual entry
  • Auxiliary DNS server entry as 8.8.4.4
  • Click on apply to finalize this change.

  Then, press the icon of Webservices () and reactivate your webservices (necessary for scan to e-mail, ePrint and other features).

  Please let me know the result of your troubleshooting by responding to this post.  If I helped you to solve the problem and that you liked this post, feel free to give me virtual accessories by clicking on the 'Thumbs Up' icon below and by accepting this solution.

  Thanks for posting in the Forum from HP Support. Have a great day!

• OfficeJet 6700: change the default settings of the printer

  I want to change 'Gray levels' to 'Off' to 'Black ink only' and 'Output quality' to 'Normal' to 'project '. I went to the Panel of control permanently change my default settings of the printer, but whenever I try to print, the parameters began to 'Off' and 'Normal '.

  Hey @arican55,

  I see you have some problems with the definition of default values on your PC of Windows 10 when printing to your Officejet 6700 Premium e-all-in-one printer. I can help you with that.

  To clear all default settings:

  1. If the printer is connected via USB cable to your PC, delete.
  2. In your search type in printers bar and open devices and printers.
  3. Right-click on any icon of your printer listed.
  4. Click on remove the instrument.
  5. Repeat for all other icons of your printer listed.
  6. If you removed the USB cable, connect. If this is not the case, click on add printer and follow the prompts to add a print to your printer queue.

  Please let me know the results after following the above. If you can set the default values, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• install the software for hp officejet 6700 premium

  I have a new hp officejet 6700, I can't get the software to install on my win xp computers. all I get is an html element that is not compiled. It fits perfectly on my laptop running win 8.1. I have tried to download the latest version, but still get the same result. what I am doing wrong?

  Thanks for calrifying.

  Please try the patch in the included link in my previous post on your PC under Windows XP, the document should address the issue you describe following...

  Please let me know the results,

  Shlomi

• OfficeJet 6700 Premium Cup footnote when printing from the computer

  OfficeJet 6700 Premium all-in-one - H711n - when I print wireless from the desktop (HP), I get an extra space at the top of printed pages and the bottom is cut off.   It is a new problem.  Printer did not have this problem in the past.   Scan doctor says everything is ok.

  Hi @katy36 and welcome to the Forums of HP!

  I see you have output problems.  I'd love to try to help you, but I need some information first. I'm a link a few HP Support documents below that will show you how to find what operating system you are using. In addition, if you are using Windows, please indicate if your operating system is 32-bit or 64-bit.

  Mac OS X: how to find which Mac OS X Version is on my computer?
  Operating system Windows am I running?
  Is the Version of Windows on my computer 32-bit or 64-bit?

  Also, do you have questions by making a copy as opposed to an impression?

  Please let me know what you find. Thanks for posting on the HP Forums!

• Faxes sending Officejet 6700 Premium [851648] of the control panel of the printer (form)

  I have a problem with my printer HP Officejet 6700 Premium [851648] when sending a fax using the control panael (screen) of the printer. It quickly shows me a blue screen with a power icon and a Error Code: "B82658AC". It shows a masseg tells me to turn off the printer. But when to send a fax via the HP utility program, sends it without problem. This is the first time to send a fax after the purchase of the printer. I did the Test and show me that everything is OK. My printer is connected directly to the telephone line. I just want to now how to fix this problem, thanks.

  Hello! Welcome to the @Mu96aFa forums

  I read on the fax number you are having and I personally would say the troubleshooting guide below for you. The guide check all connections fax, settings, etc..

  Can't send or receive faxes

  Also, check and update the firmware if necessary: having the latest Firmware and product updates

  If troubleshooting doesn't help not solve your problem, then I would say call the HP Technical Support to see other possibilities for you, as a replacement or trade. If you call in North America, the number is 1-800-474-6836 and if you call outside the United States / Canada, region of: click here.

  Best wishes

• OfficeJet 6700 Premium: officejet 6700 wifi on despite the Panel saying otherwise

  My 6700 Officejet is set up do not use wifi, but to use a wired network. On the control panel of the printer, the wifi logo is off, and in the settings menu, it says that wifi is disabled.

  Despite this, the printer is trying to install a wifi network. It broadcasts a network name. (I checked: the network name is the printer model, it disappears when I turned the printer off, and it reappears when I turn on the power.)

  What should I do to really turn on wifi?

  Hi @pieterl,

  Welcome to the Forums of HP Support!

  I see that your printer HP Officejet 6700 Premium broadcast a wireless signal, but you want to disable this feature. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  I understand that the wireless is off, but the printer still broadcasts a wireless signal. I gather that you see is 6700 portable printer HP Officejet HP Setup menu wireless on the computer or other wireless devices? This seems to indicate that the Direct wireless is enabled.

  The menu on the front panel of the printer, go to:

  • Setup menu > network > wireless Direct > turn wireless Direct off the coast.

  This should fix the problem for you.

  Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!

  

• Unable to scan to the computer of my 6700 Officejet premium

  Hello

  I have a new Officejet 6700 premium it's connected wireless to my hub.

  I have two computers attached to it, my work computer XP and my computer running Windows 7. All functions work perfectly on my work computer, but I can't get the scan function to work on my computer at home. I constantly continues to receive the Unreachable error message scanner "to scan communication cannot be established.

  I lived all the diagnostic tests, doctor scanning HP finds two errors

  • Windows WIA Scan
  • HP Twain scanning

  but offers no advice other than to restart everything (that I have MANY times).

  I disabled all my firewall and re-installed all the HP software and drivers.

  I'm now at the stage where I'm about to resume and get another product, unless someone can help me.

  Thank you

  Hello world

  HP has designed a quick and easy tool that diagnoses and solves many problems of printing, scanning and connectivity: The HP Print and Scan doctor. HP recommend you to download and install Print and scan doctor no matter what time you need to solve a problem with your HP printer from the link below.
  
  I would like to know what are the errors you receive?
  
  http://www.HP.com/go/tools

• HP Officejet 6700 Premium: Don't scan and the scan dialog box will not open

  Since I upgraded my computer to Windows 10, I'm unable to use my scan on my HP Officejet 6700 Premium function.  I can't even open the scan dialog box to look at the options etc.  I tried to find 'Scanner and printer' in painting, but it does not recognize.  Any suggestions?  I already deleted the printer and re-installed.  It was working fine before on Windows 8.

  Hello
  
  Thank you for using the HP forum.
  
  You can download and install the software COMPLETE features of HP printing for your operating system:

  http://support.HP.com/us-en/drivers/selfservice/HP-OfficeJet-6700-premium-e-all-in-one-printer-series-H711/4322971/model/4323605#Z7_3054ICK0K8UDA0AQC11TA930S6

  Once you have downloaded and installed the software, FULL of features, you will be able to print and scan.

  Hope that helps.