RT of token & soft Windows RSA

Similar Questions

• How install/run the soft token RSA on Windows 8?

  I'm a consultant, and my client uses the Soft-Token RSA software so that I can work remotely from time to time.  I just bought a new laptop from Windows 8, but can't seem to install the RSA on it.  Someone was able to install and run the software RSA Software Token on Windows 8?

  Thanks for any help.

  Hello Manegame,

  The Soft token RSA software is not on the Windows 8 Compatibility Center. You should check with the manufacturer to see if they have information on compatibility.

  You can install in compatibility mode for Windows 7, Windows Vista or Windows XP.
  You can right click on an .exe file and choose to resolve compatibility issues.

  Or you can go to the Control Panel, click on troubleshooting icon and follow the instructions.
  Select next, run programs for previous versions of Windows.

  I hope this helps.

  Marilyn

• RSA token with Cisco VPN clients

  I am currently using the 3.6 Cisco VPN client that connects to a 6.3 (4) version Pix. I want to migrate to token SecurID from RSA to RADIUS authentication. Is this possible with these versions of the software? I could not find information on the client to support the SecureID.

  Roland,

  Yes, it is possible.

  Please see the below URL for more information:

  http://rsasecurity.agora.com/rsasecured/guides/imp_pdfs/Cisco_PIX_702_AuthMan61.PDF

  Let me know if it helps.

  Kind regards

  Arul

• Satellite A50 - cannot log into windows

  Hey guys, i struggled to connect to windows. When I turn on my laptop, the toshiba start screen appears and then after that it says: "Please select the operating system to start."
  There are 2 options to restore Windows xp home edition and windows xp home edition. It doesn't matter which option to choose, after that I entered just laptop restarting and reappears on the toshiba start screen.

  What can I do?

  Hello

  This looks like a Windows Startup Manager.
  I assume that you have installed, or you have tried to install a second Windows operating system or / and you've created a partition.
  Am I wrong?

  Well, generally the unit should start after choosing one of the options. If this doesn t start then try to start in safe mode.
  Then start the system properties. This option you will find in the control panel.
  Choose the Advanced tab in the system properties. Then in the startup and recovery section, press the set button.
  Then press the button change. This function allows you to modify the boot.ini file.

  Check if you see the two lines like this:
  "multi (0) disk (0) rdisk (0) partition (1) \WINDOWS="Micro soft Windows XP Professional "/ fastdetect/noexecute = OptIn

  Well, you need to delete a line and save the file. This line is responsible for the choice between drunks at the beginning.

  If this procedure doesn't help, well, in my opinion, the new installation of windows is required.

• How can I reinstall the Windows Update Service

  Windows Update service not installed (not class in mmc.

  I ran the following at the command prompt suggestion in the Forum answers:

  Microsoft Windows XP [Version 5.1.2600]
  Copyright (C) 1985-2001 Microsoft Corp.

  C:\Documents and Settings\schamber > net stop wuauserv
  1060 system error has occurred.

  The specified service does not exist as an installed service.

  C:\Documents and Settings\schamber > rmdir /s %windir%\softwaredistribution\wuredi
  r
  Are C:\WINDOWS\softwaredistribution\wuredir, you sure (Y/N)? There

  C:\Documents and Settings\schamber > net start wuauserv
  The service name is not valid.

  More help is available by typing NET HELPMSG 2185.

  C:\Documents and Settings\schamber >

  I just ran the soft Windows Center FixIt for Windows Update with the following result:

  Update Windows components must be repaired... No fixed X

  Try to reset the windows update components and verify if you are able to install.

  You can reset windows update components by referring to article:

  How to reset the Windows Update components? http://support.Microsoft.com/kb/971058/en-us>

  Download and save the fix it 50202 from the page above.

  Close all open programs and browsers before you run the fix it.

  Remove all excess icons (each of them, essentially) of the taskbar (lower-right)

  As downloads fail, when you run the patch, choose it is the default mode when you run it the first time.

  When he finished, check if download updates now.

  If updates are still not download after running it, then run it again and choose it's aggressive mode.

  Then reboot and see if the download updates now.

  UTC/GMT is 17:52 on Sunday, December 11, 2011

• Access through RSA SecurID w / RADIUS ASA

  Hello

  I'm trying to configure AAA to access our ASA box. I have an RSA SecurID appliance with the operation of Steel Belted Radius. I have implemented access SSH and telnet without any problem.

  However, when I try to access it via HTTP or with the ASDM, it will not authenticate. I enabled http server and added the appropriate commands, but what actually happens is when I try to log on by HTTP, it sends 2 RADIUS, 1 queries immediately after the other. So one gets accepted, 2nd gets rejected. I think it's because you cannot authenticate twice with the same token on the RSA code, so why the 2nd request is rejected. But he should not be sent 2 requests in the first place.

  This does not happen through SSH.

  I have attached a log from the flow of connection through the FW...

  Any help is greatly appreciated!

  Hello

  ASDM will not work with Server Token RSA generated passwords. Generated by the Token RSA server past are one time only use. They expire after the first use. ASDM uses Java that caches of authentication once connected at the start. For all transactions http subsequent of the ASDM, uses Java caching of authentication information when communicating with the device. Each action of ASDM to the device is a transaction independent http involving any SSL handshake, but that Java uses cached authentication information users do not have to re-enter it.

  ASDM works only if the configured authentication mechanism uses persistent passwords. Unique PASSWORD mechanisms do not work with the ASSISTANT Deputy Ministers.

  Try to test http authentication with a user account local on the Radius Server and verify the results.

  I hope this helps.

  Soumya

• Sound is not produced after the installation of Windows 8.

  I use the Intel D102ggc2 motherboard in my PC with 2 GB of RAM DDR2, 160 GB HDD. After you have installed windows enterprise edition 8, there is no noise does not detect even after playing .mp3, .avi files. But I can see the videos in the application. I thing graphics driver is also not has not detected, because the screen icons appear in larger text.

  Please answer this question. Thanks in advance.

  After msinfo32, I had this information

  Name of the operating system Microsoft Windows 8 Enterprise
  Version 6.2.9200 Build 9200
  Another Description of the OS is not available
  Manufacturer of operating system Microsoft Corporation
  Name of the SPARK system
  INTEL_ system manufacturer
  System model D11020M_
  System Type X 86-based PC
  System not supported SKU
  Processor Intel (r) Pentium (r) D CPU 2.80 GHz, 2800 Mhz, 2 Lossnay, 2 logical processors
  BIOS Version/Date Intel Corp., GC11020M.86A.1065.2006.0502.1638, 02/05/2006
  SMBIOS Version 2.4
  BIOS Legacy Mode
  Manufacturer of motherboard Intel Corporation
  Model baseboard is not available
  Name of plinth base
  Role of platform office
  State of secure boot not supported
  PCR7 Configuration binding is not Possible
  Windows directory C:\Windows
  System directory C:\Windows\system32
  Boot Device \Device\HarddiskVolume1
  The local United States
  Hardware Abstraction Layer Version = "6.2.9200.16384".
  Spark\Marrit user name
  Time zone Pacific Daylight Time
  Physical memory (RAM) installed 2.00 GB
  1.87 GB total physical memory
  1.03 GB available physical memory
  3.75 GB total virtual memory
  2.72 GB available virtual memory
  Pagefile 1.88 GB of space
  Paging file C:\pagefile.sys
  Hyper-V - VM Monitor Mode Extensions not
  Hyper-V - second level address translation Extensions No.
  Hyper-V - virtualization enabled in Firmware No.
  Hyper-V - data execution Protection Yes

  Hi Marrit,

  1. is the computer connected to a network domain?

  2. are you able to hear the system sounds?

  3. have you ever tried to play through all the applications media (such as music Soft, Windows Media Player, etc.)?

  4. what was the previous version of the operating system installed on the PC?

  Please check the status of the device device device manager graphics and Audio.

  See the article:
  Open the Device Manager

  http://Windows.Microsoft.com/en-us/Windows-8/where-is-Device-Manager

  Expand "Audio inputs and outputs" and "Graphics card", right click on the device and click 'properties '. Here, on the general tab, you can check the status of the devices.

  You need to update the audio and graphics card drivers.

  Kindly, follow these methods and check if that helps

  Method 1:

  Check out the link to fix the problem more away:

  'No sound in Windows.

  http://Windows.Microsoft.com/en-in/Windows/no-sound-help#no-sound=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab2&v4h=winxptab1

  Check if the problem still persists. If Yes, proceed to the next method.

  Method 2:

  Consult the computer manufacturer's Web site to download and install the latest drivers for graphics card and audio.

  See the "driver installation" section to install the drivers.

  Let us know if it helps. If you have any other questions, we will be happy to help you.

• Unique password on SAA for VPN access

  Hello

  It is posibble create a unique password on SAA for VPN access?

  I googled a bit and found a few solutions with unique servers from other suppliers.

  I wonder if this is possible without additional hardware/software.

  Hello

  you will need to integrate the VPN with the RSA. they will give you once the configuration of the password tokenized soft or hard token.

  Outside of RSA, there is no other choice I guess.

  I hope this helps.

  Kind regards

  Anisha.

  P.S.: Please mark this message as answered if you feel that your query is resolved. Note the useful messages.

• I have century link for my internet and they put sort of a Qwest tab that opens every time I open firefox. How can I get rid of him?

  I downloaded a link that Qwest offered to do my upgrade to 10 GB soft windows. After that download is when the additional tab Qwest appeared. It is not listed as my home page and I deleted the download but I still get the tab everytime I open Firefox and I want to get rid of it.

  If the page does not appear when you call a new window (Ctrl + n) or click on the Home button, it could be incorporated into the shortcut you use to start Firefox. You can check a shortcut from the desktop/taskbar changed as follows:

  • Shortcut on the desktop: right-click on the icon, choose Properties
  • Icon taskbar pinned: clic click right on the icon, right click in Mozilla Firefox, click on properties

  Windows normally selects the shortcut tab. If this is not the case, go ahead and click on the shortcut tab.

  The target line do not need anything after this part:

  • Windows 64-bit, standard 32-bit Firefox: "C:\Program Files (x 86) \Mozilla.
  • Windows 64-bit, 64-bit Firefox test: "C:\Program Files\Mozilla Firefox\firefox.exe"
  • 32-bit Windows: "C:\Program Files\Mozilla Firefox\firefox.exe"

  If all URLS are listed after this, claire them and save your changes. To test, you can:

  • Shortcut on the desktop: double-click the icon to launch a new window
  • Icon taskbar pinned: right-click on the icon, click Mozilla Firefox to open a new window

  If you get only your homepage, it worked.

  Was she?

• ITunes update failure

  My Windows PC will not update to the latest version of iTunes. I need it to be able to sync my music on game to my iPhone 6 s. I get this window.

  

  Hello

  Please cancel this installation has failed. Then re-run, but before do you: right-click on the configuration file and select "Run as Administrator"

  More information here: h-a-full-administrator-access-token http://windows.microsoft.com/en-us/windows7/how-do-i-run-an-application-once-wit

• I need XP but do not want to Miss Vista on satellite series

  Hi friends,

  I tried to install Xp on a different partition for XP and Vista... but... It was a nightmare... I installed XP but nevere can start the system on Vista and Xp only automatically executed.

  I had to restore my system of product recovery disk and format the drive to get Vista to boot. I did so, and as you know I lost all installed programs. I did back up data to DVD, but I could not restore them after the restore.

  Please help me...
  I need XP, but I don't want to lose Vista.
  Meanwhile, after you set up XP I couldn't set up my wireless and then connect to the internet...

  Please guide me how to install XP keeping my current Vista. I have 2 partitions C and D.

  Thank you very much.

  Hello

  I put t really know why lafonction installation doesn t.
  You must first install the Vista (from the recovery CD)
  Then starting in this operating system. Create the partition under Vista. In management disks you should reduce the C partition, then you could activate the partition on the free space.

  Then, you could install XP on the second partition.
  In the system properties-> General-> startup & recovery
  You can set the default operating system and the second operating system.

  It is a part of the booloader file.

  [boot loader]
  timeout = 30
  default = multi (0) disk (0) rdisk (0) partition (1) \WINDOW S
  [operating systems]
  "multi (0) disk (0) rdisk (0) partition (1) \WINDOWS="Micro soft Windows XP Professional "/ fastdetect/noexecute = OptIn

  Just add the Vista steps, and you should be able to choose between the two OS at startup.

  [boot loader]
  timeout = 30
  default = multi (0) disk (0) rdisk (0) partition (1) \WINDOW S
  multi (0) disk (0) rdisk (0) partition (2) \WINDOWS Vista
  [operating systems]
  "multi (0) disk (0) rdisk (0) partition (1) \WINDOWS="Micro soft Windows XP Professional "/ fastdetect/noexecute = OptIn
  "multi (0) disk (0) rdisk (0) partition (2) \WINDOWS="Micro soft Windows Vista "/ fastdetect/noexecute = OptIn

• Menu start cannot open or pane of Notification after system restore

  I think I might have discovered what caused my problem with opening the menu start before. I had an operation system restore and now cannot open the start menu or the notification pane. I tried to cancel the system restore, but that did not help. Does anyone know how to fix this without using the Windows restore feature? I tried editing the registry found here, but it did not work. The haptic feedback that happens by pressing the soft Windows button on the front of the computer worked again (because it is not this worthless), but the start menu still does not open.

  Hello

  Thanks for posting your question on the Microsoft forums.

  I understand that you are in a frustrating situation because you are facing problems with access to the start menu in the Windows 10 Technical Preview 9926 build. Please provide the following information to help you in a better way.

  1. do you get an error message when you try to access the Start button?

  2. What is the brand and model of the computer?

  I suggest you to refer to the suggestion of Sharath Srinivasa from the following link and check if you can access the start menu.

  http://answers.Microsoft.com/en-us/Insider/Forum/insider_wintp-insider_search/start-menu-doesn

  I hope this helps.

  Please post back with the State of the question and we will be happy to help you further.

• What is the correct order of network provider

  original title: network provider order

  What is the correct order for network providers.

  my choices are:

  a. provide Dell Wireless WLAN Card Logon

  Server Desktop Session host remote M/Soft b.

   c. Web Client Network and

  d. M/Soft Windows network...

  Hello

  The order of network providers can be changed according to the requirement. I suggest you to see the following link on the change of the network adapters.

  Modify the protocol bindings and the network provider order
  http://TechNet.Microsoft.com/en-us/library/cc732472 (v = ws.10) .aspx

• Wifes computer

  She had a vires so reset to factory settings after starting windows re remained in installiton to wear soft windows live essentials 2011 21/27. How are we past this? system OS is windows 7 64 bit, I have also a recovery disk windows 7 that I bought on eBay if this helps solve this problem, there is also no home screen just the software installation screen after reboot to factory settings,

  I personally would like to exclude updates recommended installer with important updates of reality by changing the settings of update of these,

  

  

  Then follow these instructions

  It is expected by M$, we must now jump through hoops to clean install.

  http://www.ZDNet.com/article/sticking-with-Windows-7-the-forecast-calls-for-pain/

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-update/Windows-Update-remains-at-checking-for-updates/ff3c442e-79a6-40d3-AC35-29e130cebef1

  If looking for updates to hang on a current installation,

  Switch your windows update setting to never check the updates temporarily

  Restart the machine

  Then you download this from your download folder run from there.

  https://TechNet.Microsoft.com/library/security/MS16-039?f=255&MSPPError=-2147217396

  Download the x 86 for 32-bit or x 64 for 64-bit

  Install it and restart when prompted too after he did a search of stand-alone for updates that should not

  take too long, it took all of 5 seconds, '' If '' windows update settings are turned on forever check

  updates before running from the downloads folder.

  Once it installs and restarts

  You can reset your updates affecting everything you had before default =...

  Then check the updates manually.

  I think that the solution came from Softpedia and Joel_CS posted on this thread,

  http://News.Softpedia.com/news/Windows-Update-hanging-when-downloading-April-12-patches-502886.shtml

  You must scroll down for Joel SC post threads, it is the last answer on this page,

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-update/Windows-Update-hangs/dbd539c3-bfc6-42DF-a6ff-0e55ef7938eb?page=6

• ACS 5.2 GANYMEDE + and two-factor authentication?

  I am trying to wrap my head around this topic and fault.  I want to configure two-factor authentication via ACS 5.2 GANYMEDE + without having to use a token (such as RSA).  Is it possible to do?

  More information:

  Users of the areas without AD link will connect to routers and switches.

  Is there an available certificate server to generate certificates.

  SSHv2 is the current Protocol of the connection.

  Thank you!

  Without RSA, I don't see a way to do this.

  With Ganymede all you have

  username:xxxxxx

  password: xxxxxx

  ciscoasa > activate

  password: xxxxxx

  above you use 2 login password and activate it.

  Jatin kone

  -Does the rate of useful messages-