Reference ppbm5 problem (updated)

I tried to run the reference as harm Millaard suggested to find the problems I have with the 5.5 to the smooth ORGANIZATION.

I think the typical instructions in the Readme in this Benchmark works somewhat different NMIs to my system and not work completely as it should.

It's what I founded and why 5 reference did not work with me:

Step 1:

Opening with Benchmark... project the program ask 'where is the AVCHD Phil 1 file. MTS

You must choose the file: Phil AVCHD 1 and opens program.

Step 2:

Work, a Dutch soul, screens seems different from the American. The preset will not wont change, but it says 'be '.

I have all the settings in step 2 the same that requested, the process is going well I think.

Step 3:

Doesnot work... You will find in the directory PPBM: Statistics (without .vbs). Double click on gives a failure, "file not found or replaced."

"Doubleclicking with the command: open with opdrachtprompt ' gives a file named"Output (not .txt)"in the directory PPBM. This file is empty. There are no instructions to the letter.

step 4: those who even once, after having opened the project with benchmark (not .ppro) the aks programm for the file AVCHD Phil 1.MTS, and you must give the Phil ACVD 1 to open.

You see the project in the timeline (H.264 test) and you can make and body nearby.

Step 5:

It is, in my view, the bottleneck. Cannot open 'Statistics.vbs' as I said before, it doesnot exist. There is a file named vbs statistics (without .vbs) but cannot open, at least with the command 'open with opdrachtprompt '. But then you get once again the same empty text file in the directory PPBM. There is no exit named message txt with success created, or instructions.

Visual conclusions: benchproject s 1min.20 around rendering.

The cardriving section playingin the clip goes hand in hand with a little stutter (at least it looks) when this section play forewaert cars.  But, the section where the cars drive backwaerts, the picture stutters a lot more, about 1 to 1.5 "stutter" per second (appears on the monitor 3rd as the projectmonitor of the BODY also) as it does in my projects. This is also the case when I only play this carclips, triggering other tracks in positions and again.

So here I stay with the benchmark.

I have no suggestions due to the fact, I think that the txt file did.nt working as it should, but visually, something is wrong.

Plug monitor support only the 3rd 2nd video card and not the monitor on which you can see the projectmonitor of the BODY. Cards CUDA to separate the two, 570 for the process, the 520 card support only the 3rd monitor...

Visually, it looks if the rendering is fine, the TEA also works, but detailinformation is not there to analyze the system.

Suggestions for the Dutch approach and perhaps what may be wrong.

Chris

Chris,

In Control Panel, Folder Options, view, you happen to have the "Hide extensions of known file types" checked? If so, then uncheck it. Then you should see the script displayed in the form "Statistics.vbs" and the file result as 'Output.txt '.

If your Win7 installation is OK, then "Statistics.vbs" must appear in the directory, if the display is set to medium icons, with an icon like below:

If the .vbs file icon is not as above, your registry settings for the VB script has been corrupted and you need to Google for registry repair parameters. I have this file on my desktop system, but is currently working on my laptop from abroad, so I can't seem to him earlier.

It may be that the download was corrupted, then you might try to re - download it again. I'm sorry but I only versions of operating system and programs, nothing in Dutch, so I can't help you with funny Dutch translations.

Tags: Premiere

Similar Questions

  • Anyone else having problems updating apps from the app store?

    Anyone else having problems updating apps from the app store?

    I have the problem. I'm running on iOS 9.3.2... I have 29 apps waiting for update, but its not updated. No matter what fix on this yet?

  • blue screen problem update Radeon hd 6770 m

    so I went to amd and makes automatic detection, so I can get the latest driver for the video card in HD 6770 m... once I downloaded the new driver updated and installed, I can not open my catalyst and says that I have no hardware support and I also get the blue screen crash my computer... to solve this problem, so I had to do a system restore and restore all the drivers and im currently stuck with the version of the 8.882.2.300 driver that was published in the year 2011...

    I have a HP Pavilion dv7-6195us laptop computer
    and I hurt after my gpuz so you can help me solve my question... Thank you


    Please help me

    I have a HP Dv7 6197 ca with the same card as you, then here is how you fix this problem: update your BIOS to the latest version, and then in the BIOS screen (press ESC, then select the Bios Setup) and change the setting for the Graphics Mode fixed to Dynamics. This should solve your problem. If you can't find this option in the BIOS update, then try the UBR tool in the installer of UNIFIL. I suggest try F840 and F940 values.

    If the resolution is all wonky after you go into the BIOS, you will need to re - install the drivers.

  • Problems updating graphic adapter Intel Corporation - Graphics Adapter WDDM1.1 WDDM1.2,

    Hello!

    I have several lenovos windows 7 with this update

    Problems updating graphic adapter Intel Corporation - Graphics Adapter WDDM1.1 WDDM1.2,

    I'm trying to fix it with the original driver?

    http://www.Intel.com/p/en_US/support/detect?IID=dc_iduu

    all the solutions out there?

    THX

    Peter

    You can download the driver from the Intel website (search on your model number of graph, then Windows 7), read the notes first check it is correct for your hardware, uninstall the graphics drivers (Windows will return to a default basic driver), restart and install the new drivers.

    If this does not work, the Lenovo Web site will be older (but certified to work) drivers for your system model.

  • Hello having a problem updating to windows 10 Aspire Z3620

    Hello

    IM new here and having a problem update from 8.1 to windows 10. Stuck at 84% and having to roll back to 8.1

    I have read that I need to update the BIOS during which I checked and there is a newer version, but I really don't want to do without notice or advice of an expert.

    ROM file contains the BIOS file, BACK and WIN files contains the software for the BIOS flash file.

    Normally, the BACK is safer but is not really a big difference.

    If something goes wrong, there is a recovery operation to make but it is only available on service manual.

  • problem updating SP3 after a reboot at the end of the update process, IE8 will not start

    I have no problem updated from sp2 to sp3. However after a reboot at the end of the update process, IE8 will not hold. When I click on ie, computer absolutely crashes. Help, please

    Restart your computer and if restart is ok are not trying to run IE8. Go to add and remove and remove IE8 and your computer will be re-established on IE7.  If all is ok so far restart your computer once more and if everything is ok at this point you can download IE8 again.

  • There was a problem updating photoshop cc

    There was a problem updating photoshop cc, U44M1P7. How to solve?

    Hello

    Please see: -.

    "Installation failed" error U44M1P7 with Adobe Creative Cloud or updates of Adobe Creative Suite 6

    U44M1P7 error code

    Error U44M1P7: Cannot apply CS6 Adobe Extension Manager Update | Mac OS

    Hope this helps!

  • Problem updating iDRAC and LC on Poweredge R710

    Hello

    I am facing problems updating one of our Poweredge R710 (all others worked like a charm). Using OME I could install almost all day, but iDRAC (Firmware 1.10--> 1.95) updates and controller of lifecycle (application 0--> 1.6.0.73) will not be successfully completed.

    OME to ESM_Firmware_CMDN0_WN32_1.95_A00 error message. EXE: "performance operation exceeded a specified time-out period. The update has not completed; You must restart your system and try again. "(even after several server restarts the message is always the same).

    Error message in OME for lifecycle - Controller_Application_GFFFC_WN32_1.6.0.73_A00. EXE: "update failed: failed to secure copy - the secure copy function has failed.

    When starting the server "Update Services system requirements" is shown in the upper right of the bootscreen. I've tried ressetting iDRAC (Ctrl + E at the start), turn off the server for 30 minutes (cable unplugged, replugged, waited 5 minutes, powered by the server) update system Build & Update Utility thorugh with SUU 7.3.1 and finally using the CentOS OM 7.3 Live DVD. None of this has worked successfully and I have no more ideas. Maybe someone has a?

    Here are the necessary links. Fires within the OS.

    DRAC - http://www.dell.com/support/drivers/us/en/19/DriverDetails/Product/poweredge-r710?driverId=63KCR&osCode=WS8R2&fileId=3287900761&languageCode=en&categoryId=ES#

    Then run this, it is a set of lifecycle controller repair. http://www.Dell.com/support/drivers/us/en/19/DriverDetails/product/PowerEdge-R710?driverId=8F07J&osCode=WS8R2&FILEID=2731110409&LanguageCode=en&CategoryID=SV

    Then update the LC with this - http://www.dell.com/support/drivers/us/en/19/DriverDetails/Product/poweredge-r710?driverId=F0D50&osCode=WS8R2&fileId=2984894513&languageCode=en&categoryId=SV#

  • Typedef reference FPGA not updated in the private class data

    I have a FPGA reference related to a typedef that is passed in a LVOOP object. If I change the FPGA of computer simulation of dev to the use of the actual hardware, all references to the typedef are updated which are controls on a diagram. But the typedef in my private class data seems not not to date, so I'm broken son until I replace the control to private data of my class with a copied from my block diagram. Has anyone seen this? Is there a CAR already? I can create a small project to reproduce if necessary.

    Edit: this also seems to happen when I change bitfiles or change to open a VI a bitfile opening in the Configure dialog box open FPGA VI.

    Hi Greg,.

    I was able to reproduce your problem thanks to your easy to follow instructions.

    I noticed that type def successfully by checking "Bind FPGA host of reference to the type definition" in the open FPGA VI reference configuration. What does not automatically update is the Issue.ctl of OBJECT-oriented programming, which has a nested type definition in the private data reference.

    The fastest solution, that I could find was to right click on "Issue.ctl" in the project, and then click Save. This problem immediately solved the broken wire error.

    While configuring open FPGA VI reference has the practical ability to bind to the def of type, it does not broadcast this change to data private to the class. I call not this bug, but I can see how you want it works this way.

    I would recommend you post that on theExchange of ideas (I see you're already regularly here).

  • Problem updating to a control on a panel based on a change in value in another control on another Panel

    Hello

    I'm trying to update the value of a control on a Panel, when the value of another control on another Panel is changed.  The two panels are saved in two .uir different files, so there are two associated .h files generated by CVI.  The problem is that, inside the callback function for the control being modified (Ctrl_Id_A on Panel_A), when I call it SetCtrlVal (Panel_B, Ctrl_Id_B, Value); 'Panel_B' and 'Ctrl_Id_B' (who have the same numeric values Panel_A = 1 and Ctrl_Id_A = 2 in their folders respective .h) are interpreted as Panel_A and Ctrl_Id_A.  I never understood how ICB does this distinction, for example. knowing that PANEL_A = 1 and PANEL_B = 1 is mentioned, but don't worry because I never needed only to intercommunication between the panels up to now.  Any help on how to implement this would be greatly appreciated.  Thank you!

    For your reference, in this discussion , I give a few basics on how the panels and controls are handled.

    Additional useful forum discussions can be found here : this is the list of the results of a search of forum for "constant handle name Panel": you will find several useful posts that you can read to better understand the concepts of handle Panel.

  • Cross reference flow problem

    Hello

    I try to develop a PDF parser, but I'm stuck at the stream of cross-reference.

    First of all, my program reads all the objects in a PDF document, and then saves it.

    If the version is 1.5 or superior, the cross-reference is an object that uses the filter FlateDecode and a predictor of 12.

    Everything seems to be good, but the PDF reader cannot open the file.

    When I save the file with a normal cross-reference, the PDF works fine.

    Can someone please help me find the problem in the following file:

    Download

    The file above is the result of the following file:

    Download

    With a normal cross reference table, therefore this file (work):

    Download

    Note that the difference between 1 and 3 is only at the end, where the dealer or the purpose of the xref.

    I checked the table of cross references again and again, but I could not find the error.

    Thanks a lot for your help!

    13 + 1 would be better

    The specification also says: 7.5.4 [...] For a file that has never been updated incrementally, the reference section contains only one paragraph, one object numbering starts at 0. [...]

    If you follow it, you must also not the Index Entry, or?

    Could you show me the results of your current work?

    See you soon,.

    Jan

  • battery after 9.3.4 problems updating iPhone 5s

    Hi all! I'm having a serious problem of battery since the last update, I did it on my iPhone 5 s 32GB.

    I'm not on the device and drains the battery in just a few hours! It's also very hot most of the time.

    Does anyone else know this?

    I tried to kill all the apps that seem to eat most of the battery (Whatsapp, Chrome, music), also I tried to go to Low Power Mode, airplane Mode and as a last resort, restore the phone. Nothing seems to work!

    I'm worried that it will not return to normal.

    Also, you should know I bought it on the United Kingdom and now that I live in Argentina, and there is no official Customer Service for iPhone here! So, this forum is my only hope...

    Appreciate any help!

    Thank you!

    S

    When you go to settings/battery, you can see that either the app uses the most energy. Sometimes an update will cause an app to misbehave; It is not something to do with the version that you updated, just the fact that you updated.

    And killing apps in quick launch screen usually will not solve a battery with an application problem, because the problem is in the app data, not the application itself. And when restart you the app it gets the same data.

    Try to restore the iOS on the phone via iTunes.

  • problem updating itunes

    I update itunes to 14.2.2 and after downloading the file, I get a message that says "the installer has insufficient privileges to edit this file C:\program\files\itunes\itunes.resources\ca.lproj\DevicePrefsGeneralAppleTVStre aming.itxib.

    I tried to change the access privileges for this file, gel itunes and reinstall, etc., but it does not work.

    any help would be appreciated. I am running windows 10

    General advice for troubleshooting when iTunes is unable to properly install (and reinstall or repair it does not) are to remove not only iTunes, but ALL the components, restart, remove the target installation files and reinstall.  See the excellent iTunes to turingtest2 Windows Troubleshooting Guide at:

    Troubleshooting problems with iTunes for Windows updates

    especially the section:

    Remove and then reinstall iTunes and other software components

  • Problems updating to version 12.0 question + 64 - bit

    On the first question: my Firefox 11.0 will refresh by 12.0, even when you browse the path "about Firefox-> check updates". I know that the release date for 12.0 was today, so I don't understand what the problem is.

    On the second question: is it true that, since version 13.0, there will be a 64-bit version of Firefox? If so, users will be able to choose to upgrade to 64-bit before the update 12-13?

    Time of release 12 Firefox on demand (subject to change) is 8: HAP to the United States this time has not yet arrived from this response. Adjust right there at your local time.

    The 64-bit version of Firefox may not occur for several months yet. Currently, there is a test at night (14 of Firefox) version, the less stable/secure level and should be installed by users very experienced for the test only. Plugins in 64-bit by third-party developers are still quite rare.

    If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

    Not related to your question, but...

    You may need to update some plug-ins. Check your plug-ins and update if necessary:

  • Problem updating app workspace Sprout

    The HP Support Assistant said that there is an update to the workspace to germinate. It downloads ok, but when installing, Norton Internet Security indicates that it contains a virus. I also get a dialog stating "there was a problem starting c:\windows\installer\msi78a.tmp. Access denied» Then NIS opens and won't run.  Whenever I try to download and install the file name changes.

    I saw the designation of "Rev A", but because the file was dated April 9, and the HPSA and the location of the support stated that I "updated", I did not download it.

    Even though I prefer Norton, I got with her prior false positives with downloads from other sites.

    I'll give it a shot anyway!  Just to relax after a LOT of yardwork today...

    EDIT: I downloaded the file on the site and said to use the HPSA to install it.  He tried, but failed due to the fact that I neglected to follow the signs for "close all applications and save all the files before proceeding.  blush <>

    Tried again, this time close IE and any other application installed and running fine and rebooted.

    I suggest you turn off NIS during installation.  Run a full scan later in order to ease the worries.

    WyreNut

Maybe you are looking for