Refresh the binding once certain conditions are met

Similar Questions

• Hide the button until all Conditions are met?

  Please help!  I am creating a forklift safety training module. There are 12 buttons on the first slide (see screenshot 1); However, only 11 are visible at the beginning of the slide.  The 12^th button is a "continue" button that appears only after all the content slides (slides 2-12) were considered by the learner.  I used a conditional action to hide the button (something I learned from @Lilybiri) until all the conditions are met.

  
  

  The problem:

  The "Continue" button does not always appear once the content slides have been read.  I found I can do appear to ebb in each slide content, show the slides a few seconds more before returning to the main slide- which seems certain conditions which tells Captivate to display the button "continue".  Of course, I don't want the learners to face to the challenge of trying to understand why they cannot continue. I just want to visit the pages relating to each key to all conditions met.
  

  
  

  Screenshot 1: the initial screen (actions related to the change of color of button below)
  

  

  
  

  Screenshot 2: chronology of the page main interaction

  

  
  

  Screenshot 3: conditional Action to display the button CONTINUE (created as a decision 2nd out of action of 'Transport').

  My expectation was that OnEnter, slide would be recognized as read and count for the condition that all 11 pages of content would be considered before that appear the continue"" button.  I set the time to s 3.0 (see screenshot above) on all content slides.  No transition, no effect.
  

  

  
  

  Screenshot 4: each slide content is returned to the slide main interactivity by an OnSuccess: jump to the command of the slide.  Nothing special here.  I tried to reduce all the content slides to 1.5 s nothing works.

  

  
  

  Screenshot 5: an example of the page interaction BEFORE all the content slides were read and before 'CONTINUE' button appears (ignore the footer buttons; it was just me to experiment with styles of button).

  

  
  

  That's a lot, I know.  I wanted to cover the entire base.  I would appreciate your thoughts and your expertise.  Thank you in advance!

  
  

  Michael
  

  How about what is probably very close to what you have already made... (After double checking all of your shares advanced for bugs)

  Each main menu button sets the variable 'consulted' 1, hides the active button, show visited button, then jump to the content. Alternatively, you can put the action on the close button for each slide as you did.

  Then in your main menu, you will have the conditional action on enter that verifies that each variable 'seen' is 1. If it is true, then it will show your button continue.

  I use this method with almost all of the modules that are non-linear. I use it to display a button quiz start, tab summary etc...

  To check your programming that I'm down in a text caption that has all the variables, you will have to look and make sure that they change to 1 as it should. As soon as something does not change probably you have found your problem. Also make sure that none of your actions changed to continue if you have accidentally deleted an object or something similar.

  Also BTW: If you want to increment a variable, you use the action "expression" rather than "assignment." If you keep just assign 1 to a variable, all that you will ever get is 1. example: If the variable = 7 and you assign 1 then now variable = 1.  If you use the variable expression variable = + 1 then you will be able to increment. Also be careful if a user visits an article more than once because it increments the new variable unless you have a control to see if the content has been seen before, and then past increment. Otherwise they could visit the same section 11 times and then have the button continue become visible.

• "All the conditions are met" - not exactly?

  Hello again! I'm experimenting a little, set up a mock up of the slightly more complicated project of Captivate to help some of my practice of co-workers with Captivate. I am under a problem but with one of my examples:

  I put a map of the world and six text entry areas to invite a user to name the continents (except Antarctica). I attributed to each box TE an associated variable where it is placed, that is the entrance area of text on Europe is associated with linked a variable titled 'in Europe. I want the slide does not advance until all mailboxes of YOU are properly labelling of each continent.

  Currently, for each main entry text box, rather than by a single shipment, a peak action occurs which assigns the associative variables with a literal name. For example, for action advanced in North America, marked NA_Check, it has an action to display a caption saying 'okay' and assign the NorthAmerica variable with a literal: "North America".

  An advanced global action runs when a user is trying to push a "Continue" button that checks the State of the variables. The conditional action because its properties 'if' that all the conditions are met with Asia = 'Asia', Africa = 'Africa', etc. of all human beings "AND". I assumed that with all of them being 'AND' they must all be true for this check properly. However, I have separate legends for the success or failure, and for some reason all I have to do is to get two correct and I can go forward as if I was 100% correct.

  I thought that maybe it had to do with the variables being assigned prematurely, so I made an action on enter which assigns each variable with "0" so that the entry in the text box would be the only way to make the correct variables. This doesn't seem to work. Any thoughts? Why only do two of the 6 conditions for success when I list all necessary?

  I'm not sure. Maybe a bug in the code of Captivate?

  I think I might rather assign some values to variables and do some calculations, and proceed only if the result is equal to a specific value.

  But that's just me... Rick

• Hide the button if the Conditions are met

  I have a form that has 3 drop drop-down options 1, 2 and 3 in them.  I want to hide a button if '1' is selected any of the 3 boxes of drop-down list.  But the problem is I want what he re appear if the user changes his mind and wants to select 2 or 3.  So at any point and time I want the visible button if "1" is selected.  But I want it visible if none of the boxes have "1" or are empty.

  Thanks in advance for taking the time to help.

  Hello

  The script itself works. Not sure what prevents it from giving you the results you need without seeing (that is, it has to do with something other than the structure of the script itself).

  Check the following:

  • Set the values as numbers on all drop-down lists: 1,2,3 in the binding of the object palette tab
  • Make sure that the reference syntax is correct - if the drop-down lists reside in a different subform or other line in a table, you will need to make changes.
  • Make sure you have chosen formCalc on all drop-down lists
  • Make sure that you place the scripts on the Exit event - must be out event, change event no.
  • Make sure other scripts are not interfere - maybe, there are scripts attempts you have forgotten to remove
  • Use the "Check syntax of Script" button in the Script Editor
  • Check the newspaper for clues to guide you.

  It is the best help I can offer without seeing the form.

  Good luck

  Stephen

• Conditional liquid do not print when the conditions are met.

  I build a simple menu in British Colombia and for the purpose of this project, I'm going to be exposing this menu without using Module of menu in British Colombia. I use the following code:

  {% If globals.user.isLoggedIn contains 'true' %}}

  < id = "my-account-link" li > < a href = ' / my account "> < i class ="fa fa-diamond"> < / i > < span class ="-animate "> my account </span > < /a > < /li >

  < id li = "settings-link" > < a href = "/ my account-#settings" > < class i 'fa fa-sliders' = > < / i > < span class = "-animate" > my settings </span > < /a > < /li > ""

  < id = 'link-support' li > < a href = "/ my account/help" > < i class = "fa-fa-question-circle" > < / i > < span class = "-animate" > support </span > < /a > < /li >

  < id li = "logout link" > < a href = "/ LogOutProcess.aspx" > < class i 'fa-fa-sign-out' = > < / i > < span class = "-animate ' > Log Out < / span > < /a > < /li >" "

  {% other %}

  < id li = "connection-link" > < a href = "/ login" > < i class = "fa fa-sign-in" > < / i > < span class = "-animate" > Login / / Sign Up </span > < /a > < /li >

  {% endif %}

  I have used before with other snippets of code and this liquid condition print very well. For some reason, when I test the newspaper, the State still shows the wrong code even when I look through the JSON printed in the console object and the object user loggedin contains the value Boolean 'true '. Sort of at a loss as to why it is not printing when the user connects. Really want to use liquid on it and do not have to revert to the version JS of the hiding items.

  Thanks in advance to all! Best wishes!

  Well, I feel stupid, I was following the copy and the tutorials BC and pasted. Realized that I had to use operators such as "is" appropriate and «!» = ». I fixed it now

• check the table to see if all the conditions are met.

  Hello

  I want to see if all my items in my table have hit an area on the stage and got a bit doing wrong.

  the following code works:

  If (ball1.hitTestObject (Box) & & ball2.hitTestObject (box) & & ball3.hitTestObject (box)) {}

  trace ("Completed");

  }

  However, my goal is to have these movieClips stored in a table and would still like to call the hitTestFunction and AFTER THAT each item has hit the area to trigger an action, like that I could just add however items I want and keep the same line of code. Obviously if I set the table in a loop and assign [i], it's just going to join this element and the trigger, and I "m thinking that each property on the table could work it is just a matter of implementing a function to capture the right information. I hope this makes sense, and I appreciate your help.

  Try this. Loop breaks when it is not hit - so a single object success will leave false hit test.

  var ballsArray:Array = [ball1, ball2, ball3];
  
  function checkHits():void {
      var isAllHit:Boolean = false;
      for each(var ball:Sprite in ballsArray) {
          isAllHit = ball.hitTestObject(box);
          if (!isAllHit) {
              break;
          }
      }
      trace("all hit?", isAllHit);
  }
  

• How to hide the results of the formulas until the conditions are met

  Hello, I have (SUM (A6÷2 × 1, 0)) × (data sheet-1 Services': Table 1::AH6) the problem is that I don't update A6 until needed so all down my sheet I have these red triangle. I know they will disappear when the data is entered into A6 but I would like for them to hide until then. Can someone help me please? Thank you

  also and last question today, I promise you.

  I have a table that has text in I have another table that I want to bring text on is there a formula that if I say it looks like the cell of table 1 and it will bring the text (name) to table two?

  Thanks again for all quin t help and thanks to you who make me on the right track for the issue of the menu popup I got earlier

• Extend the existing under certain conditions drive and add if no disc

  Here's what I'm trying to achieve.

  1. increase the disk space on a drive (drive C - D) especially if they are smaller than a standard value of the particular company
  2. detect if there is a 2nd drive or not and if not then add a 3rd disc

  Optional:

  (a) extend the drive increased inside the guest OS

  (b) initialize, format the drive newly added inside the guest OS

  Currently, this is what I came with

  #if hard drive 1 is less than 60 increase the size of the HDD to 60 and then to exceed inside the guest OS or ignore this action

  Get-disk hard - vm TestVM | where {$_.} Name - eq 'disk 1'} | If ((mesure-objet-propriété CapacityGB-somme) - lt 60) {}

  Together-hard drive - CapacityGB 60 - ResizeGuestPartition-confirm: $false

  }

  on the other

  {

  Write-Host "no action is needed" - foregroundcolor Red

  }

  Now, I don't know how to add a 2nd 80 GB drive after checking if it has a 2nd drive or not.

  My motto is, he must check if there is a 2nd drive or not and if there are move adding the drive and if there is no 2nd disc (disc 2) then add a HDD of 80 GB.

  You could do something in this sense

  $hd = get-disk hard - vm TestVM

  if($HD.) Count - eq 1) {}

  New-harddisk - CapacityGB 60 - VM TestVM

  }

  else {}

  Write-Host "2nd current HD - no action is needed" - foregroundcolor Red

  }

  If ($hd [0].) {CapacityGB - 60 lt)

  $hd [0] | Together-hard drive - CapacityGB 60 - ResizeGuestPartition-confirm: $false

  }

  else {}

  Write-Host "HD1 is 60 GB or more - no action is needed" - foregroundcolor Red

  }

• SCSI driver is missing in the virtual machine. Driver is missing in the provided website. Instructions on how to install the driver (once you find) are missing.

  I get the text following error encrypted every time that I boot Windows XP in VMWare Fusion, since I've upgraded to version 4.02 a few months ago.  So I upgraded to version 5.02 hoping the error would go, but he didn't.

  When I try to start it, it says "he has at least a virtual SCSI device installed on this virtual Windows XP computer.

  Windows XP does not include the drivers for the card SCSI BusLogic VMware Fusion uses virtual SCSI devices.
  To use these virtual SCSI devices, install the VMware driver in the virtual machine. "Download the driver of"http://vmware.com/info?id=43"."
  Once I have to dismiss the message, everything seems to work properly.  How can I make this message disappear?

  I tried to go to the useless link that is provided (http://vmware.com/info?id=43), but it takes me just for a general download for all VMWare products page.  Then I tried searching for "SCSI" but it does not have the driver, I'm supposedly dedicated research

  After doing a bit of searching around, I finally found a driver called "vmscsi - 1.2.0.4.flp ', I connect to my virtual floppy drive.  Once I did, my virtual machine wouldn't boot (I get the error "NTDLR is missing.)  I then unplugged the virtual floppy drive, and now my virtual machine starts again.  I then re-connected the drive floppy and discovered the following content:
  Disk.Tag
  Txtsetup.OEM
  vmscsi.cat
  vmscsi.inf
  smscsi.sys
  OK... Now what?  No installer?  What the hell am I supposed to do with it?  I tried a double click on all of these files and have no significant results.  When the pilot is supposed to go?  No instructions? -What VMware calls "support"?

  The VMware Tools GUI has been removed because it has now integrated with the Virtual Machine settings, however you can still use the command line.

  C:\Program Files\VMware\VMware Tools>vmwaretoolboxcmd help
  Usage: vmwaretoolboxcmd  [options] [subcommand]
  Type 'vmwaretoolboxcmd help ' for help on a specific command.
  Type 'vmwaretoolboxcmd -v' to see the VMware Tools version.
  Use '-q' option to suppress stdout output.
  Most commands take a subcommand.
  Available commands:
     device
     disk
     script
     stat
     timesync
     upgrade (not available on all operating systems)
  

• Obstacle of the expression: run the expression, if two variables are met

  Hello

  I have an animation with a large NUMBER of text objects. And there are 3 translations for each text object.

  Now, I put all of this, so that I have through a controller box/rocking in the Comp hand can control the language of animation throughout the project. So instead of click 1 billion power layers, whenever I have to make a language, it's a one-click solution. And it works like a charm. In this way I accidentally do exclude a layer not when rendered.

  It goes like this. The opacity of a specific layer is driven by an expression. It's either

  (comp("MAIN_COMP").layer ("/ / TOGGLE the LANGUAGE") .effect ("danish show") ("checkbox") == 1? value: 0)

  Gold

  (comp("MAIN_COMP").layer ("/ / TOGGLE the LANGUAGE") .effect ('show norwegian') ("checkbox") == 1? value: 0)

  or

  (comp("MAIN_COMP").layer ("/ / TOGGLE the LANGUAGE") .effect ("show finish") ("checkbox") == 1? value: 0)

  Sometimes I text objects that are identical, Norwegian and Danish are very similar.

  To avoid duplication of the text layers (in order to organize and keep my sanity), how could I implement the expression of the opacity to meet these requirements:

  If the box EITHER Danish OR Norwegian is activated, display the layer. If none of them are controlled, do not show.

  Is there a clever way to combine the two expressions for layers of text in question?

  This should work:

  controlLayer = comp("MAIN COMP").layer("// TOGGLE LANGUAGE");
  (controlLayer.effect("Show Danish")("Checkbox") == 1 || controlLayer.effect("Show Norwegian")("Checkbox") == 1) ? value : 0;
  

  (the | is logical OR).

  Xavier.

• Configuration of the loops in LabVIEW to return to the beginning under certain conditions of CRC calculation

  Hey gurus of LabVIEW,.

  Well, I recommend also move your file in writing to be inside the loop, more precisely inside the TRUE (I could bad told you before).  If the CRC was released in 0, do you all the processing, otherwise do nothing.  Then the next iteration.  By moving the file i/o inside the loop, you're avoiding accumulate huge berries (IE a lot of memory).

• Try to count the number of records where some columns are met

  Using SQL in Toad against an Oracle table, I'm trying to count the number of records in a table where some columns are filled. For
  example, I need to know the total number of records from a table where
  
  ln_stop_cd is not null - 65000 records
  ln_process_cd is <>- 25000 0 records
  ln_opt_cd is not null - 7500 records
  
  and the record_type = "A".
  
  I know that the total individual records as described above. However, I do not know how
  the SQL to show for record_type = 'A' the total count is 97500 records. Any help would be
  appreciated.

  Hello

  It seems that the problem is that the indictment may overlap; You can count the same rank 0, 1, 2 or 3 times, depending on whether 0, 1, 2 or 3 of these 3 independent conditions are met.

  Try something like this:

  SELECT     COUNT (in_stop_cd)
        + COUNT (CASE WHEN in_process_cd  != 0        THEN 1 END)     -- this site doesn't like the other inequality operator
        + COUNT (in_opt_cd)        AS grand_total
  FROM    table1
  WHERE     dt          >= TO_DATE ('01-JUN-2011', 'DD-MON-YYYY')
  AND     dt          <  TO_DATE ('02-JUN-2011', 'DD-MON-YYYY')
  AND     record_type       = 'A'
  ;
  

  You want to make charges without making 3 assists separated through the table. The problem is the 3 original requests had slightly different WHERE clauses.
  Put these conditions in the WHERE clause and make other conditions apply only to the individual counties, either with a column instead of *, or using a CASE statement that contains the condition that applies only to the column.

  Also, the date is not a column name good. Do not compare the DATEs to strings. If your column is really a DATE and you want to ignore the hours, the minutes and seconds, then the best way is to compare the column with 2 other DATES, as shown above. It's more coding, but it is more efficient and more reliable.

  I hope that answers your question.
  If not, post a small example data (CREATE TABLE and only relevant columns, INSERT statements) and also publish outcomes from these data.
  You don't have to display a large amount of data. You can probably give an excellent example of this problem with only 5 or 10 rows of sample data.
  Explain, using specific examples, how you get these results from these data.
  Always tell what version of Oracle you are using.

  Published by: Frank Kulash, August 4, 2011 11:27

• Dynamic action does not not on the first attempt to load page. Work after refreshing the page

  4.2.1

  Hello

  I have a page with a list of selection Order_id and a display _item Product_name.  There is action dynamic PL/SQL that fills the element displayed when the order_id is changed. The problem is that when I opened the page for the first time, if I change the select order_id list, nothing happens. But if I refresh the page once, and then it starts work and the display_item is filled.

  No idea what could be the problem?

  Thank you

  Ryan

  ryansun wrote:

  On a more serious note,.

  1 when you load the page for the first time and try selecting the order_id, nothing don't be past, try refreshing the page once and you will see the option to display with the null value. What I do is. I have two tables

  Orders

  1

  2

  3

  Products

  1A

  2B

  2 Z

  3 C

  When I select the command 1, then since there is only one line of products, the displayed item will indicate A populous. If I select 2, since there are two product lines, I should see the list box.

  Doesn't seem to work and I'm sure, I'm doing something wrong.

  Difficult to be certain that as it appears that someone has been editing the page before you start watching (rather than copy the page experience their own copy). Your article P1_PRODUCT_NAME_DISPLAY he a point value / Expression 1 column = Expression 2 condition P1_HIDE_SHOW = 1 condition on that? Or any other condition of rendering?

  These conditions do not match the dynamic actions. They are applied only during the page see the transformation when the page is displayed first; When it is linked to another page; or after a branch to him. They are not applied dynamically during the activity of the user on the page. In this case, that the status is set to false when the page is rendered first, the same element does not exist in the page sent to the browser. If you want these items to appear conditionally because of the interaction with another user control, then you must initially return the elements and control their visibility using hide/show the dynamic actions.

• imaqReadAVIFrame retrieves the empty image under certain conditions?

  Hello

  I'm having a problem where imaqReadAVIFrame (.) is the white recovery (all black images) under certain conditions.  The conditions seem to be when the height of the AVI file is equal to or greater than the width and the height is an odd number.  AVI files created by using the various AVI NI Vision (IMAQ 4.6.1, IMAQdx 4.6.1) functions in an application created in CVI 2012 on a computer running Windows 7 64 bit.  AVI files use MJPEG compressor, and they play back fine in an external program like VLC or Windows Media Player.  Any ideas on what this could be?  My solution for now is to not to allow the creation of AVI files where the height is odd and equal to or greater than the width that is not a boring restriction, but it seems like there's something weird happens with imaqReadAVIFrame().  I can provide some AVI files if necessary, but they are 16 + MB each.

  TStanley,

  I managed to reproduce what you see with your .avi files in a program I wrote.  I built a LabVIEW program that creates an AVI file which can be saved to memory and then uses code from the example finder to read who created the file.  I build the file to your specifications at the height is greater than the width, and the height being an odd number of pixels.  Something interesting about this, however, is that it seems to be a point where an odd height is acceptable.  Once you go below the height of 291 pixels, any odd height then works.  The files that I used are written as read in LabVIEW, but that the configuration should be irrelevant because we are seeing the same issue.  In addition, LabVIEW and LabWindows CVI calling the same dll to actually set up the code.

  In this, I think this question arises from the nature of the way you compress the. AVI file.  If you are interested to read a bit more about it, a useful link can be found here:

  http://www.manifest-tech.com/media_pc/avi_formats.htm

  However, what I think is happening, is it that MJPEG file compression format translates into creating files that cannot be read by our software unless the height in pixels is a multiple of 2 or the size of the file is below a certain limit.  To fix that, there is a simple solution. Compress the file with any of the other compression methods available (DV video, Cinepak Codec, codec Intel IYUV, Microsoft RLE, Microsoft Video) and you will be able to open the file without the black screen.  This worked for me and should solve all your problems.  I hope this gives you a bit of insight.

  Kind regards

  Keith M

  Technical sales engineer

• How to run a while loop continuously without iterate loop inside the fi, a condition is met

  I enclose a VI that once the answer 28 comes the loop must stop and loop should continue an iteration. Can you show me a way for her

  You can stop the loop when a certain condition occurs: http://zone.ni.com/reference/en-XX/help/371361H-01/lvhowto/add_cond_to_for_loop/

  Add a register to offset for the while loop and to implement the feature as below: