Regarding cisco EOS

Similar Questions

• Changes in prices for the contracts of Support for Cisco IDS/IPS

  Nice day

  My boss asked me if there is no value added regarding Cisco's recent move to charge separately for hardware and software support for IDS/IPS product line.

  Other than what is obvious (need software support for updates of signature, need of material support in case something breaks), I'm having a hard time to provide a response.

  Can anyone suggest what is the increased value, other than annual recurrent costs more we get as a result of this change of license?

  Also, was there any release press or other notice to the client about this change?

  I am at a loss...

  Alex Arndt

  Alex,

  Cut through the spin and the hype... the software support allows us to finance a development team dedicated to signature, which has improved our signature rejection rates and response times. In addition, it is allowing us to expand our coverage to keep IDS 4.1 to get the support of the signature. It is contrary to our previous policy which would have seen 4.1 updates to signature cut shortly after 5.0 released.

  A side effect of this is that our development team is now free to focus on the development of the feature, and you will see more updates, more often.

  Can't comment on press releases and others, they make your head spin my ;)

  Scott

• Security for the TC endpoints registered to CUCM

  Hi friends,

  I need your help once more!

  We have a new Cisco Telepresence environment to deploy. In this environment, we have enrolled in CUCM (8.6.2) endpoint TC (v 5.1) points. The CUCM fit to VCS/VCS Expressway in order to be able to call endopints on the internet.

  We will also have TMS and TP server to use multipoint and demand. TP will be registered in VCS.

  Back to the question:

  Can we have TLS and sRTP resource on endpoints registered to CUCM TC?

  I was looking for some deployments of CallManager and security guides, but I found nothing cordially to endpoints TC, I haven't found information regarding Cisco IPphones.

  Y at - it no document on this subject? I looked on the document "Administer endpoints TC on CUCM" and nothing.

  Kind regards

  Paulo Souza

  Hi Paulo,

  The Cisco TelePresence TC Software Release Notes (TC5) is the document that has the answer you are looking for.

  "When recorded natively in CUCM, encrypted calls are not supported"-see page 18 / 74

  Kind regards

  Paula

• Can someone give me details and difficulty regarding the vulnerability of traumatic psychosis for Cisco ASA version 5?

  We have experienced frm, our compliance team that we run in traumatic psychosis wanted vulnerabity so know the fix and document...

  Hi James,

  We have a PSIRT filed regarding the vulnerability of traumatic psychosis, please see details below:

  CSCur00511    Evaluation of the ACS for CVE-2014-6271 and CVE-2014-7169

  https://Tools.Cisco.com/bugsearch/bug/CSCur00511/?reffering_site=dumpcr

  Here is the information of fixed code to various versions:

  Fixed code:
  Patch for CSCur00511 of the DDT is ready and available on CCO.
  The patch is included in all update rollups version 5.4.0.46.7/5.5.0.46.6/5.6.0.22.1 and later. We recommend that you download the latest cumulative patches.

  Download of: CEC / Support / download software http://www.cisco.com/cisco/pub/software/portal/select.html?i=! y
  Letter: Security / identity management / Cisco Secure Access Control System / Cisco Secure Access Control System 5.4 / 5.4.0.46.0

  Patch file name: 5-4-0-46 -.tar.gpg
  Read me and displays instructions: Acs-5-4-0-46--Readme.txt

  Download of: CEC / Support / download software http://www.cisco.com/cisco/pub/software/portal/select.html?i=! y
  Letter: Security / identity management / Cisco Secure Access Control System / Cisco Secure Access Control System 5.5 / 5.5.0.46

  Patch file name: 5-5-0-46 -.tar.gpg
  Read me and displays instructions: Acs-5-5-0-46--Readme.txt

  Download of: CEC / Support / download software http://www.cisco.com/cisco/pub/software/portal/select.html?i=! y
  Letter: Security / identity management / Cisco Secure Access Control System / Cisco Secure Access Control System 5.6 / 5.6.0.22

  Patch file name: 5-6-0-22 -.tar.gpg
  Read me and displays instructions: Acs-5-6-0-22--Readme.txt

  Download of: CEC / Support / download software http://www.cisco.com/cisco/pub/software/portal/select.html?i=! y
  Letter: Security / identity management / Cisco Secure Access Control System / Cisco Secure Access Control System 5.3 / 5.3.0.40

  Patch file name: 5-3-0-40 -.tar.gpg
  Read me and displays instructions: Acs-53 - Readme.txt

  Kind regards

  Tushar Bénard

  Please evaluate the post if you find it useful!

• End of sale (EoS) / end of life (EoL) information on Cisco TelePresence system 1700 MXP

  I have a question about the EoL (http://www.cisco.com/c/en/us/products/collaboration-endpoints/eos-eol-po...) policy and the announcement of EoS/EoL Cisco TelePresence system 1700 MXP (http://www.cisco.com/c/en/us/products/collateral/collaboration-endpoints...).

  According to the policy of the EoL, paragraph 4 ter, "after the first year and for the operating system SW - if available - we will offer bug fixes, versions of maintenance, workarounds or patches for a period of 4 years for operating system software."  Therefore, it is 5 years after the Date of the EoS, which could make the OS support close on 28/02/2017 EoL products.  I'm one to believe that a product and its applicable operating system are good as long as the company provides patches for bugs/flaws.

  My question is about the migration of the product suggestions.  The suggestion is to "migrate to the Cisco EX Series (the EX60 or solution EX90) telepresence system."  However, when the announcement of EoS/EoL EX60 inspection, the "SW maintenance communicated End Date of: HW, SW OS ' 06 07, 2016.  Note that it is not the end of Maintenance SW verbiage in 1700 MXP EoS/EoL announcement.  I'm under the assumption that the new product within OS support only one model exceeded?  Why anyone would follow the suggested migration if I get fewer months support OS than an older model?  Should I go out of date on the announcement of the EoS/EoL, or use the 5-year rule as shown in the end of life policy.

  If I am interpreting this wrong, please do not hesitate to correct me.  I am trying to understand the explicit verbiage in the end of life and ads EoS/EoL policy.

  As the 1700 MXP announcement was published in 2011, at that time, the EX60/90 was a legitimate substitute. However years later, endpoints EX Series are now EOS, you should look at alternatives for the EX series instead.

  The announcement of the EOS/EOL indicates a date of end of software support, you should go there. The reason that ad 1700 MXP does not list one could be that the date of assumption of the software had already spent or they simply don't have the list at the time. Looking at the latest version of the software for the 1700 MXP, it's F9.3.3 in 2014, I highly doubt, there will be another, but you never know given that other points of MXP endpoints that are not past their published end date of software support.

• Backup of configuration Cisco Codec C40

  Dear all,

  Can I know how to take backup of the configuration of the Cisco Codec C40, please?

  And also help me with the document of the administrator?

  Thanks in advance

  Kind regards

  Syed

  You can simply copy the output of the xConfiguration and paste it into the SSH client.  You may need to change the output a bit to get the correct formatting, however.  For example, the output registered since my SHH client contains a preceding * c which must be removed before that I can stick again in the SSH client:

  *c xConfiguration Video Wallpaper: Waves

  When you perform a software update, codec configuration, including the keys installed option is not affected and will remain in the process. Keys options include Premium (PR), double (DD) display resolution and Multisite (MS). C40 has been end of sales since June 2015, so it is not possible to order anything for this, see eos-eol-notice-c51-733467. Procedure to upgrade the software codec is on pg 28, the same page mentioned in my previous answer. To upgrade codec software, you will need a release key when switching from one major version to another, as TC5 to TC7. You can request a release of the Cisco Licensing Portal key > obtain other Licenses > telepresence free software key, as long as the device has an active support contract. If you do not have an active support contract, you can contact TAC and get the free unlock key by referencing the Security Advisory cisco-sa-20160504-tpxml, which you can get a key to unlocking TC7.

• SA - VAM unsupported in Cisco 7206VXR

  Hello

  I have a 7206VXR with NPE-400 Cisco. The IOS version is 12.4 (24) T3. I installed a SA - VAM in the router in slot 6, but do the following on the console.

  AP-Pune-RT #.
  23 Feb 11:16:34.484: % PA-3-NOTSUPPORTED: PA in slot6 (unknown (type 650)) is not
  supported on this chassis
  23 Feb 11:16:34.484: % PA-3-DISABLED: in the Bay [6] port adapter turned off.
  23 Feb 11:16:34.584: % PA-2-PABRIDGE: failure of config bridge for 6 PA
  23 Feb 11:16:35.384: % PA-4-IMPROPER_REMOVAL: incorrect deletion for Groove 6.
  23 Feb 11:16:35.384: % PA-3-DISABLED: in the Bay [6] port adapter turned off.
  23 Feb 11:16:35.468: CRYPTO-4-PKT_REPLAY_ERR %: decrypt: re-read the verification failed
  connection ID = 975, sequence number = 677864

  SA - VADM is not supported in the 7206VXR router?

  Thanks in advance.

  Kind regards

  Anand

  It should be supported.

  Perhaps the last IOS stop supporting this card EoS.

  You can try to downgrade your IOS to 12.3 T or 12.2 T to see if it makes any diff.

• Cisco VPN Client causes a blue screen crash on Windows XP Pro (Satellite M30)

  Hello

  I have a Satellite Pro M30 running Windows XP Professional.

  After you start a vpn Tunnel via a customer of Cisco VPN (Version 4.6 and 4.7), the system crashes with a blue screen.

  I see that the key exchange is successful, but immediately after the vpn connection is established Windows XP crashes with a blue screen.

  Someone has any idea how to solve this problem?

  Perhaps by the updated device driver? And if so, which driver should be updated?

  Kind regards

  Thorsten

  Hello

  Well, it seems that the Cisco client is a problem.
  I m unaware of this product because it of not designed by Toshiba.
  I think that the drivers are not compatible with the Windows operating system.
  However, I found this site troubleshooting cisco vpn client:
  Please check this:
  http://www.CITES.uiuc.edu/wireless/trouble-index.html

• EOS 7 d Mark II vs 70 D

  Hi all

  I am an amateur (Techno IT by profession) and would like to know which one should I go for - EOS 7 d Mark II or 70 d? I have EOS 600 d for the last three years and lenses - lens 135mm kit, Canon macro 100mm, Tokina Wide angle and 400mm Tamron AF. However, I got my 600 d repaired twice in the last 1-2 years (Board of Directors has changed twice due to a technical problem - Canon Service does not gives me the details). I've spent some money on repair services so upgrade to a better.

  I usually shoot landscapes, macro, photography, Portraits (just started) and astrophotography. I would like to grow my photography skills additional for exhibitions and online sales beginning especially with photography of birds and wildlife. I'm fine with the budget for the two DSLRs. I put doubts still to go for 70 d and invest the remainder in 600mm Tamron.

  Please suggest that it fits my needs.

  Kind regards

  Sameer

  In my humble OPINION, both cameras are not comparable.  If the 7 d Mk II is in the budget, go for it.  It is not even a choice.

  There are no 600mm Tamron?  Do you mean the 150-600mm zoom?  Tamrom makes the lenses very little choice but the 150-600mm F/5-6. 3 Di VC USD has a $70 discount until the end of the month.  It's a remarkable lens for the money.

• Cisco connect software for E4200V1

  Hi all

  Original and downloaded the software CiscoConnect E4200 is after installation relative to the EA4500 version and does not work with the E4200V1 router.

  Solved!

  A bit of logic did magic,

  The software for E4200V1 updated to version EA4500 which does not work for E4200V1, I thought that maybe update version mГЄlГ on the Cisco update server, so I downloaded E4200V2 witch software is the same as EA4500.

  I installed and the program started as Linksys EA4500, he updated and changed version E4200, hip and works!

  Kind regards

  ROLL GROOVER

• 10G Cisco switch

  I would like to know if the compatibility for the storage matrix Dell is updated regularly, especially for cisco switches.
  We seek to deploy a few PS6210 with 10G connectiivity and here for use with switches Cisco 4500 X series. However these are not included in the doc. There are a few cisco switches that are the end of life (4948 and some nexus switches).

  Hello

  Yes the guide is updated regularly, usually monthly or updates are available.

  Since the x 4500 is not a Nexus series switch, you looking for correct DCB support?

  In this case these Dell 'Level 3' offers better support for resonable effort.   I'll make sure that use you the latest firmware IOS and EQL.  There are other switches catalyst IOS in the guide.  Configure it in this sense would be a great place to start.   Ideally, the switch dedicated for iSCSI use, not VLANd with other types of traffic.

  If you can first test before production, then support can see table diagnosis and SANHQ archive for any signs of network related issues.   (retransmit rate and types for example)

  Kind regards

• PowerConnect 6248 switch for Cisco router

  Hello

  I'm new to this forum and I have a problem at the moment between a Cisco router and a dell pc6248. The problem is that I lost conectivity in VLAN 1 when I connect the router to a trunk port in the switch, however I conectivity VLAN 2 through this link to trunk. The configuration of the switch:

  interface ethernet 1/g48

  switchport mode trunk

  switchport trunk allowed vlan add 1-2

  output

  interface ethernet 1/g43

  switchport mode access

  switchport access vlan 2

  output

  On router

  fast interface 0/1

  no ip address

  no downtime

  fast interface 0/1.1

  encapsulation dot1q 1 native

  IP 192.200.3.1 255.255.255.0

  fast interface 0/1.2

  encapsulation dot1q 2

  IP 192.168.51.33 255.255.255.248

  output

  With the above configuration, I lost conectivity with the host in the vlan 1 - 192.200.3.x/24, but I win conectivity VLAN 2, when I connect the router to the 48 trunk port in the switch. This means that the trunk link for VLAN 2 work but not for VLAN 1.

  I read on the port of general mode, where I can configure the pvid of the port as 1 (vlan1) and it would be the unttag VLAN (even natively in Cisco), and I can configure the VLAN 2 like the tag, all this in the same port. What do you think about this? Someone have set up something like that?

  Best regards

  Erasmo

  PD: I write from Chile, I apologize for my English.

  I agree with you, I would try the general mode on the PowerConnect switch.

  mode console # switchport general

  Console # switchport General allowed vlan add 2 tag

  Console # switchport pvid General 1

  Keep us updated.

• Unable to connect to network WPA2 with Windows 7 64-bit (Intel 4965 and Cisco WUSB600N)

  Connect to a WPA2 network seems to be a fairly common problem.  Again, I can't be able to find a solution.

  OS: Windows 7 Ultimate 64-bit

  Wireless adapter (s): Intel 4965AGN (integrated into Dell XPSM1330) and Cisco/Linksys WUSB600N

  Drivers: latest windows 7 64 bit drivers from the two websites of companies.  Intel (v12.4.1.4), Linksys (3.0.10.0)

  Network properties: WPA2 enterprise, encryption of the ACS, authentication EAP - P, several types of routers around the world

  History: has been able to use the same laptop with Vista32 on this network without any problem

  I can not connect to networks non - WPA WPA networks simply not.

  When you try to connect to my companies WPA2 network (at any of our locations around the world).

  Method #1:

  1. Select "Other network" in the list of network
  2. Enter the SSID of the network
  3. Windows could not connect to the SSID
  Method #2
  1. Open network and sharing Center
  2. Select set up a new connection or network
  3. Select manually connect to a wireless network
  4. Select one of my adapters
  5. Enter the SSID, as WPA2-Enterprise security type, type of encryption like AES, check the boxes to connect automatically and connect even if the network is not broadcasting
  6. An unexpected error has occurred

  Method #3: Try to trick windows

  1. Open network and sharing Center
  2. Select set up a new connection or network
  3. Select manually connect to a wireless network
  4. Select one of my adapters
  5. Enter the SSID but select an open network
  6. Adds the network
  7. Then try to change properties
  8. WPA2-Enterprise security type
  9. Set to AES encryption type
  10. "Choose a network authentication method:" drop-down menu is empty!
  11. Windows has encountered an error saving the wireless profile.  Specific error: the profile has an invalid length field.

  I'm pretty desperate for a solution.

  Kind regards

  John

  There are a few people with Win7 x 64 that cannot connect to WPA2 P/EAP Corporate/business networks and no solution?

  Come on, guys, it's the microsoft answers site! someone give me something! I have two asus laptops, both with network cards Intel having this problem on two networks separate enterprise (school).

  Edit:

  RESOLVED:

  Here's the thread of the resolution:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/unable-to-connect-to-company-wireless-network/3bcd12b1-A0D8-4357-bded-07da96259920?page=3

  The problem occurs when you perform a Wizard for easy transfer to a computer that was Symantec Endpoint Protection installed to one without him.

  Answer, copypasted:

  Inspect the key mentioned above - that is of HKLM\System\CurrentControlSet\services\RasMan\PPP\EAP.

  In each of the number keys look something like ConfigPathBackup and its corresponding ConfigPath - there are a number of them.

  For each, I deleted the original key (e.g., ConfigPath) and restored the original by renaming ConfigPathBackup to ConfigPath

  For each of them, the State is now restored to her pre State Symantec - each key pointed to a Symantec location that is no longer present and by restoring the path key backs up everything was fine

• Canon EOS 20 d digital camera 8.2MP

  How can I view and download pictures on my Canon EOS 20 d 8.2MP digital camera on my Windows & desktop PC?  The device driver is not found, and the manufacturer does not offer a driver.

  Hello

  Unfortunately, Canon EOS 20 d digital camera 8.2MP is not compatible with Windows 7.

  Please contact Canon Support for assistance.

  Kind regards
  Afzal Taher
  Microsoft technical support engineer

• Where can I download Cisco IOS Software

  Please can someone give me where should I always upload images of Cisco IOS

  Thank you very much

  Directly to the source:

  http://www.Cisco.com/Cisco/software/Navigator.html

  Note that an ORC (Cisco connection) and the valid service contract are necessary for the number of items.

  Best regards

  Ed