Region with gateway enabled but no hub - id specified

Similar Questions

• Configuration problem of the mixture of the regions with and without installation of persistence of the disc causing the JSONFormatter to fail

  I have trouble setting my local setup correctly with a mixture of regions with different configuration of persistence of disc.  Is a configuration problem on my end or a bug in GemFire and/or Spring GemFire data?

  The configuration of my work is as follows:

  < gfe: replicated-region id = "replicatedRegion" cache-ref = "gemfireCache" disk-store-ref = "overflowOnlyDiskstore" persistent = "false" >

  < gfe:eviction type = threshold "HEAP_PERCENTAGE" = "90" action = "OVERFLOW_TO_DISK" / >

  < / gfe: replicated-region >

  < gfe:local - region id = "localRegion" cache-ref = "gemfireCache" / >

  
  

  With the above configuration, I can successfully call JSONFormatter.fromJSON (json) and get a reference to a PdxInstance object.  However, when I kinda modify configuration to enable the persistence of drive on one of the regions, the call to JSONFormatter.fromJSON (json) fails.  The change is as follows:

  
  

  < gfe:local - region id = "localRegion" cache-ref = "gemfireCache" persistent = "true" disk-store-ref = "persistOverflowDiskstore"/ >

  Without any additional modification, the following error starts occurring:

  com.gemstone.gemfire.pdx.JSONFormatterException: could not parse JSON document: [Source: java.io.StringReader@5549f0e, line: column 26,: 6]

  at com.gemstone.gemfire.pdx.JSONFormatter.fromJSON(JSONFormatter.java:66)

  ...

  Caused by: com.gemstone.gemfire.pdx.PdxInitializationException: The PDX metadata must be persistent in a limb that has persisted data. See CacheFactory.setPdxPersistent.

  at com.gemstone.gemfire.pdx.internal.PeerTypeRegistration.checkAllowed(PeerTypeRegistration.java:531)

  at com.gemstone.gemfire.pdx.internal.PeerTypeRegistration.verifyConfiguration(PeerTypeRegistration.java:515)

  ...

  Note that it is breaking while I try to get a reference to a PdxInstance, and if the code has not yet arrived at the point where I place a PdxInstance object in a region.

  Thanks for any help in advance.

  Hello

  JSONFormatter PDX uses as is the serialization mechanism from the Gemfire cache. As indicators of error, you must have your persistent PDX meta-data when you use PDX with an area that itself is persistent. Adjust your configuration as follows:

  It will use a default for PDX record store, but you can also use a specific store if you wish.

  When you use PDX, a "PDXType" is created for each class serialized with PDX and this type id is stored with the data in the region. If this region is persistent, then the PDXType, associated with this object must also be kept.

  -Jens

• Just installed firefox. connected to one of my accounts, g-mail, but cannot connect to a 2nd. Message: "cookies not enabled", but they are. What now?

  I just installed firefox. I was able to access my major account google mail, but when I try to access my second and third google email account, I get a message "not cookies are enabled". I checked and cookies are enabled, but I still get the same message. I'm not tech savvy and don't really know what to do now. I need to access my e-mail, so it is a major obstacle. I love Mozilla and really want to go back to IE. I've done everything that has been proposed, but the message persists. Not found an answer fairly simple in the forums. Please help.
  Here's the google mail message:
  We have detected a problem with your cookies settings.
  Enable cookies

  Make sure that your cookies are enabled. To enable cookies, follow these browser-specific instructions.
  Cookies and empty the cache

  If you have cookies enabled but are still having problems, clear the cache and cookies of your browser.
  Adjust your privacy settings

  If your cache and clearing cookies doesn't resolve the issue, try adjusting the privacy settings of your browser. If your settings are up, manually add www.google.com to your list of allowed sites. To learn more

  It's confusing because you can log on to an account, so how could be disabled cookies?

  Maybe your Google cookies have become confused or corrupted. It would be interesting to compensation in order to see if that helps. Here's how:

  Everything a page on google.com (can be find, does not need to be Gmail), try either:

  • Right click and select View Page Info > Security > "View Cookies".
  • (menu bar) Tools > Page Info > Security > 'view the Cookies '.
  • Click on the globe or padlock icon in the address bar > additional information > "View Cookies".

  In the dialog box that opens, google.com should be filled up. You can delete all the cookies for the site individually here.

  Then try to reload the page and sign in again. Who help me?

• I can't open the images in Yahoo mail with 7 Firefox, but IE works.

  After several years of success with Yahoo mail and Firefox, I can longer open mail of Yahoo (jpg, bmp) images. I can open them in gmail with Firefox or IE. I can open them in Yahoo mail using IE. I am running Firefox 7.0.1 and I think, but am not sure, all my trouble started after the update to this version of Firefox.

  RESOLVED: Here is the solution to "I can't open the images in Yahoo mail with 7 Firefox, but IE works." Just before I log on my E-mail Yahoo site I turn on cookies, but I never enable third-party cookies. That has always worked very well until October 2011. Just after I installed the new Firefox 7 this problem started. Now I just found out that the problem is solved, if I enable cookies from third party. Users should not have to enable cookies from third party read the Yahoo mail via Firefox!

• Solitaire opens with a background - but "does not.

  My Solitaire Microsoft opens with a background - but she does NOT really open for a game. It is said ' does not ' after I go to the Task Manager.  I have Windows 7 on a 32-bit (do not know if this is important) on a Toshiba Satellite

  I worked like a champ until about three, four days ago.

  Thank you

  Billp545

  Hi Billp545,

  Welcome to the Microsoft Answers site!

  You are able to open the other built-in games on your computer?

  Method 1:

  You can try to turn Windows feature turned off and switch on and check if that helps.

  To enable or disable Windows features, follow these steps:

  1. Click the Start button, select Control Panel, click programsand then click Windows turn on or off features. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  2. To turn a Windows feature, select the check box next to the feature. To turn a Windows feature off, clear the check box. Click OK.

  Later, turn it on and check if the problem is resolved.

  For more details follow the link below.

  Turn on or off Windows features

  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-features-on-or-off

  Method 2:

  If this does not help, then this could happen if all of the background program is causing the problem persists try booting the computer to start clean and control which program is causing the problem.

  To help resolve the error and other messages, you can start Windows Vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  The steps to perform a clean boot are given below:

  1 log on to the computer using an account with administrator rights

  2. click on start, type msconfig.exe in the start search box and press ENTER to start the System Configuration utility.

  If you are prompted for an administrator password or for confirmation, type your password, or click on continue

  3. on the general tab, click Selective startup, and then clear the check box load startup items. (The check box use the file Boot is not available.)

  4. on the Services tab, click to select the skin all the Microsoft services check box, and then click Disable all

  Note: Following this step lets services Microsoft continue to run. These services include networking, Plug-and-Play, record of events, error reporting, and other services. If you disable these services, you can permanently delete all restore points. Do not do this if you want to use with existing restore points system restore utility

  Once you start office check if the problem persists, follow the steps in the article and find out which program is causing the problem.

  For more information about the clean boot, follow the below given link:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  1. click on start, type msconfig.exe in the start search box and press ENTER.

  If you are prompted for an administrator password or for confirmation, type your password, or click on continue.

  2. on the general tab, click the Normal startup option, and then click OK.

  3. When you are prompted to restart the computer, click on restart

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• IBM Thinkpad message: 'this machine can run faster with the USB 2.0 hub.

  Original title: Thinkpad USB 2.0 Hub.

  Hello:

  I have an IBM Thinkpad T-21 which is under Ubuntu & Windows xp.  I primarily use Windows XP.  The pop-up that keeps occurring is "this machine can run faster with the USB 2.0 hub.  Can you tell me how to upgrade my USB 2.0 Hub?  Would like to know because I can't sync my Android phone with my computer until I do it. Thank you.

  Are you sure you copied this error message properly?  In other words, he says that the hub could perform better if connected to a USB 2.0 port?  As far as I can determine that the T21 is not come with a USB 2.0 port, even if you connect a USB 2.0 device (for example a hub), the unit will only race as fast as the port allows it.

  What is the brand and model of your terminal?

  It is possible that the message means the opposite (i.e., your computer has a USB 2.0 port, but the hub is only a USB 1.1 device).

  USB 2.0 was introduced in 2001, so if you bought your computer before 2001, it is likely that you use USB 1.1 or 1.0.

  Open the Device Manager (start > run > devmgmt.msc > OK)
  Expand the category of 'USB Bus controllers'.
  If you see the "Enhanced" work for one or more of the listed devices, you have a USB 2.0 port.  If you do not see "Enhanced", you have USB 1.1.

  

  If the problem is that the USB port on the computer is not 2.0, so your only solution is to buy a USB 2.0 PC Card adapter.  Example and example 2
  If the problem is that the hub is not 2.0, then you will need to buy a new hub.

• Sound card is enabled but not started

  Having problems with Windows XP Home Edition.  No card sound or sound card is enabled but not started.

  I tried Windows XP, but when the page is loaded the responses do not carry on XP?

  A. reinstall or update drivers for your sound card. Never get the drivers from Windows Update. Bring:

  1. site of the device mftr. ; OR
  2. site of the card mother mftr. If the material is on board; OR
  3. website of the OEM manufacturer for your specific machine if you have a PC OEM (HP, Dell, Sony, etc.).

  Read the installation instructions on the Web site where you get the drivers.

  To find out what hardware is in your computer:

  1. read all documentation that you got when you purchased the computer.
  2. If the computer is OEM, access the site Web of the OEM for your specific model machine and look at the specs (you'll be there to get the drivers anyway)
  3. download, install and run a program of inventory of the free system like Belarc Advisor or System Information for Windows.

  http://www.belarc.com/free_download.html - Belarc Advisor
  http://www.gtopala.com/ - System Information for Windows

  B. Si the fact of the above does not work, your sound card may be dead. If you have a desktop computer, uninstall the old card and put in a new its PCI card. It is very costly, less than $25 for a base. If you have aboard, first disable it in the BIOS.

  If you can not do the test yourself and/or are uncomfortable opening your computer, take the machine to a professional computer repair shop (not your local equivalent of BigComputerStore/GeekSquad). If possible, have all your data backed up before taking the machine into a shop. MS - MVP - Elephant Boy computers - don't panic!

• Is there a way to make a disc ssd to work on an Inspiron E1405 with AHCI enabled?

  Recently I branch a new samsung 256 gb 840pro ssd drive for my E1405, but I discovered that the bios does not have the option to switch to AHCI mode which is necessary for the new disc.  Is there a way to get out of this limitation, or I just need to live with it?

  Thanks Jackshack.

  He did actually work and its much faster than my old drive.  However, I felt disappointed because the sequential read and write speeds was approximately 120 as opposed to my desktop computer, which is AHCI enabled processor intel core i5 with 6 GB of RAM on Windows 7, which uses the same drive was about 250 MB/s.

  Also, if you'd respond, how is it with AHCI enabled, the sequential transmissions are much lower than the maximum possible speed of 540/530 MB / s, even if my desktop is much more newer than my laptop?  What are the possible bottlenecks in this case?

  Kind regards.

• This copy of Windows is not genuine I have Win 7 Home Premium doc & key that came with the pc but no disc, can I come back to win 7 HP?

  Bought an ASUS Eee PC a few months back - a well - was inactive for a few months and now has the following message displays on the screen "this copy of Windows is not genuine" - riddle previous owner installed Win 7 Professional w/o legitimate key? I have Win 7 Home Premium doc & key that came with the pc but not the Windows 7 installation disc. Is there one had to return/restore Win 7 HP without the original disc for Win 7?

  Adding infrom of win diag tool:

  Diagnostic report (1.9.0027.0):
  -----------------------------------------
  Validation of Windows data-->

  Validation code: 50
  Validation caching Code online: n/a, hr = 0xc004f012
  Windows product key: *-* - CM74G - RPHKF-PW487
  Windows product key hash: 71BRYMECVaSXedfumfu8zryHJVY =
  Windows product ID: 00371-177-0000061-85265
  Windows product ID type: 5
  Windows license type: retail
  The Windows OS version: 6.1.7600.2.00010100.0.0.048
  ID: {C258D6DC-FCEC-4D78-A6AE-D0290D63818A} (1)
  Admin: Yes
  TestCab: 0x0
  LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Product name: Windows 7 Professional
  Architecture: 0x00000000
  Build lab: 7600.win7_gdr.120830 - 0334
  TTS error:
  Validation of diagnosis:
  Resolution state: n/a

  Given Vista WgaER-->
  ThreatID (s): n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002

  Windows XP Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  File: No.
  Version: N/a, hr = 0 x 80070002
  WgaTray.exe signed by: n/a, hr = 0 x 80070002
  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  OGAExec.exe signed by: n/a, hr = 0 x 80070002
  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->
  Office status: 103 blocked VLK
  Microsoft Office Visio Professional 2003 - 100 authentic
  Microsoft Office Enterprise 2007 - 103 blocked VLK
  OGA Version: N/a, 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Office Diagnostics: B4D0AA8B-604-645_025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
  Default browser: C:\Users\admin\AppData\Local\Google\Chrome\Application\chrome.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->

  Other data-->
  Office details: {C258D6DC-FCEC-4D78-A6AE-D0290D63818A}1.9.0027.06.1.7600.2.00010100.0.0.048x 32*-*-*-*-PW48700371-177-0000061-852655S-1-5-21-3606206582-1294634331-2799272895ASUSTeK Computer Inc. 1005PE American Megatrends Inc.. 0401 20091110000000.000000 + 000B8B83607018400F404090409Eastern Standard Time(GMT-05:00)03_ASUS_portable103100Microsoft Office Visio Professional 2003118DD0A165A1C2500EhKkzIViDaNcyOyUrmH6SKEP5sY =72085-640-9640702-5517614103Microsoft Office Enterprise 200712fFic3JgCreGGRxyF8uMWB4R4Jcg =89388-707-1528066-6591714 ACD7202654E586

  Content Spsys.log: 0 x 80070002

  License data-->
  The software licensing service version: 6.1.7600.16385

  Name: Windows 7 Professional edition
  Description: operating system Windows - Windows (r) 7, retail channel
  Activation ID: e838d943-63ed-4a0b-9fb1-47152908acc9
  ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
  Extended PID: 00371-00170-177-000006-00-1033-7600.0000-2572012
  Installation ID: 005144242421870610215885787746464524889844109506716151
  Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
  Machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
  Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
  Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
  Partial product key: PW487
  License status: Notification
  Reason for the notification: 0xC004F009 (grace period expired).
  Remaining Windows rearm count: 3
  Trust time: 06/01/2013-06:27:26

  Windows Activation Technologies-->
  HrOffline: 0x00000000
  HrOnline: 0xC004C532
  Beyond: 0 x 0000000000000000
  Event timestamp: 1:4:2013 22:28
  ActiveX: Registered, Version: 7.1.7600.16395
  The admin service: recorded, Version: 7.1.7600.16395
  Output beyond bitmask:

  --> HWID data
  Current HWID hash: MAAAAAEAAQABAAIAAAABAAAAAwABAAEAJJTQ1TeXyGP8ULjtak5GkPhQ0OYk7nIZ

  Activation 1.0 data OEM-->
  N/A

  Activation 2.0 data OEM-->
  BIOS valid for OA 2.0: Yes
  Windows marker version: 0 x 20001
  OEMID and OEMTableID consistent: Yes
  BIOS information:
  ACPI Table name OEMID value OEMTableID value
  APIC A_M_I_ OEMAPIC
  FACP A_M_I_ OEMFACP
  HPET A_M_I_ OEMHPET
  MCFG A_M_I_ OEMMCFG
  CO-SUBMISSION A_M_I_ OEMECDT
  LASRYVITRAGE A_M_I_ AMI_OEM
  GSCI A_M_I_ GMCHSCI
  SSDT PmRef CpuPm
  SLIC _ASUS_ Notebook

  the key of product in use is touch uses default windows when no key is entered during installation and cannot be enabled. (he has a 30-day grace period that has expired)

  See response from Andrew on how to install home premium.
  Office status: 103 blocked VLK
  Microsoft Office Visio Professional 2003 - 100 authentic
  
  Microsoft Office Enterprise 2007 - 103 blocked VLK
  
  
  your office is not genuine.

• Office jet while a 6600 PRINTER with scanner problems. but I can't scan where I have a modifiable document because only let's scan me documents I can not edit

  original title * Bubbles44

  I have an office jet while a 6600 PRINTER with scanner problems. I am trying to scan to my hp Pavilion 23 all in a computer with windows 8, but I can't scan where I have a modifiable document because only let's scan me documents I can not edit! HELP ME PLEASE!

  Hello Sharon,

  Thanks for posting your query on the Microsoft Community.

  I would be grateful if you could answer the following questions:

  How the computers are connected? If they are connected as a workgroup or domain?

  Method 1: Disable the security software and check if the printer works.

  Warning: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2: You can turn off the Windows Firewall and see if you can print.

  1. Press the Windows key +X key.
  2. Select Control Panel.
  3. Click on the firewallof Windows .
  4. Select enable the Windows Firewall On or off on the right next to the sign.
  5. Select the radio buttons Turn off firewall under Private and Public network settings

  Warning: after reviewing the issue, turn on the firewall.

  Method 3: Refer to the suggestions for the following links.

  How to troubleshoot printing problems in Windows:

  http://Windows.Microsoft.com/en-us/Windows-8/How-to-solve-printing-problems

  Solve printer problems:

  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Hope this information helps and let us know the State of the question, we will be happy to help you.

  Thank you.

• Dynamic region with several task page fragment flow isn't refreshing VO

  JDeveloper version is 12.1.3 and Weblogic Server is 12.1.3.

  We have a dynamic region with several task page fragment flow.  We have created a menu that will open on the workflow task in the dynamic region. Before defining the workflow id in the bean, we execute query on the original Version after setting the bind variable. When we click on the menu is open the flow of relevant tasks in the region and showing the Original data table.

  But when we open the same request again to a different browser session, it shows all the data in the original Version when the user clicks on the relevant menu item...

  I have attached the code used to navigate to the different workflow tasks written in the bean from the back of the home page.

  We have no idea why anyone what happens, if it's a server problem or a code issue. Because unless and until we open the target application in a new browser it works fine.

  We tried and deployed on a remote server as well, but it gives the same question...

  Would be really grateful for the help...

  The user, the code you posted has some serious problems. Never, I repeat never store a reference to an application module in a static variable in a bean. That is why you see only data once. After that, the second session reuses the application module from the first to the configuration data, but to display data it uses a module different application.

  The way you try to configuration data is too bad. You must pass the parameters to the workflow and init data in the default action of the workflow instead of doing before installing the new workflow id. A workflow is a unit of work that is kind of a black box. You may not assume that the stuff you do outside of this black box can be seen inside the box. This is only true if the workflow share the same control of data as it's parent (share of data control).

  I suggest you read some documents on the workflow and how they work. A good start is to look at this video https://www.youtube.com/watch?v=A3CmDhWHaG0

  or work through this tutorial 12 c (12.1.3) Oracle JDeveloper tutorials - working with bounded task flows, regions and routers

  Timo

• Conditional region with functions, does not

  Oracle EBS Bi Publisher standard (customer statement) report, using speaking
  
  I am creating a conditional region with no luck.
  
  <? substr (INVOICE_NUMBER, 1, 1) xdofx:If. decode (AMOUNT_DUE, ", 'NOPRINT', AMOUNT_DUE)! = "3NOPRINT"? >
  
  I created a field using all this substr (INVOICE_NUMBER, 1, 1) | Decode(AMOUNT_DUE,'','NOPRINT',AMOUNT_DUE) to confirm that the value is 3NOPRINT, but again the lines appear.
  
  Any ideas?
  
  Thank you
  
  -j

  You can try the code below
  

• Static region with default router activity

  Hi all
  I have a simple problem,
  
  What is the right way to do the following:
  I have a tf which has default router activity. I want to use this area as static, but also I want to call this region with dif. parametars of entry. Value of matches will put to rout next activity in static region.
  In addition, in the home page I meni, I want to spend the value by clicking on some of the elements of mani, say meni item A I spend 2 as value to the router in the static region, meni point B crossing value 99 to the router in the static region.
  
  
  I use beans, but in this case, it only works if I have some funk, for each meni set matches and bean mus be at the session, right?
  Thank you for you time.
  
  Published by: newenrba on March 20, 2012 12:30

  Hello
  You can archive this as shown here http://tompeez.wordpress.com/2011/11/27/jdev-11-1-2-1-0-using-router-to-conditionally-set-navigation-target/
  Instead of the button that I use in the blog, you use a menu item to set the variable as you then check in the workflow.

  Timo

• How can I transfer photos from my iPod touch 6th generation for my macbook pro WITHOUT using iCloud, please? It's simple with another camera but not the case, it seems, for the Apple iPod

  How can I transfer photos from my iPod touch 6th generation for my macbook pro WITHOUT using iCloud, please? It's simple with another camera but not the case, it seems, for the iPod Touch from Apple.

  Use import option from your Mac:

  Import photos and videos from your iPhone, iPad or iPod touch - Apple Support

• Will a WD My Passport for Mac (2 TB) not only with Yosemite work, but also with El Capitan if I install that even if El Capitan is not included in the information?

  I use Yosemite for the moment but soon, should move to El Capitan. However, I bought a 2 TB external hard drive to use with Time Machine, because my computer says that I'm at my limit with the 1 TB harddrive that I currently use. Box 2 to hd came says it is compatible with Yosemite, Mavericks, or Mountain Lion. Will I have a problem with this 2 TB hd if I'm moving to El Capitan?

  You will not have a problem with the drive itself; If it contains a software, which may not work with El Capitan, but you don't need any additional software to use a regular external drive.

  (143977)