registration fails, no explanation why

Recording without success

Was a problem when trying to send information on the Internet.

Gee, this is an informative error, people. There is nothing wrong with my Internet connection.

It was pretty good doggone program download and installed with the serial number I

provided on the first try, but three attempts to save it failed; the first time and after five minutes of fake "try."

Any ideas? Adobe thoughtfully CLOSED my case before to help me solve the problem. Not.

Name and version of the product?

If you are referring to older Apps, follow the procedure below :

> Disconnect your Internet connection by disconnecting the Ethernet cable or turn-off WiFi.

> Then restart the Adobe application.
> When you get registration pop up, select "never register.", then connect you to the calculate with Internet connection and check. "

Tags: Adobe

Similar Questions

  • WHAT CAN I DO ON MY FIREFOX 3.5 ME REPEAT IT THE CHROME REGISTRATION FAILED

    RPET CHROME REGISTRATION

    This link explains what you need to do - https://support.mozilla.com/kb/Chrome+registration+failed

  • "Installation Failed", no CC apps install and no explanation why

    Hello

    I'm a user of Adobe but fairly new user CC and last night I tried to install rather old and the ID of the trial on my MacBook Pro, and don't get up to 42% when I got an installation error that has no more info to it. Assuming that it was a problem with the application of Office CC, I tried to download ID by direct link and tried to install it and the result was the same: the installation bar will not yet up a notch and I had this "Installation Failed" window, without code error or any other information about what was going on. It is then that I realized that body and AE, I have already installed worked is more: when I tried to open them I got a window saying "Adobe Application Manager is needed to solve this problem." I followed the instructions and I was told that if I used CC I had to reinstall CC. Which I tried to do but not had any luck: whenever I open CC, I had an empty window. So, I followed the instructions on how to fix this and had no luck either. To make a very long story, 4 short hours, in the end, I used the CC to 'Cleaning up' AAM cleanup tool so I'll be back any body and AE. Then I was able to reinstall CC and he is currently working. But, again, I am trying to install ID (this time only manually, I'm sure he tried to install it by CC which has damaged the MAO) and I get the same generic Installation error 'Fail', for which I can't find ANY specific information anywhere, nor any means to solve it.

    I would be very grateful for any information you could give me to fixing this problem. My MBPro is barely a week and that she already has a LOT of problems with Adobe and if now I can install are more produced Adobe on it, then it is absolutely useless to me because all of the work that I do I do it on Adobe software.

    See the link below:

    Failed installation

  • MDM registration fails with "out of find CRL, unknown CA.

    I'll put up a few classes worth of iPads for a local school and a few problems getting iPads recorded on the Apple MDM server.

    We have a mac mini to the latest version of El Capitan and iPads to connect by using the domain name (theserver.mdm.theschool.edu).  The domain is registered and administered by a third party and they run the main site (theschool.edu), but they passed on to all applications on the subnet of mdm (i.e. *. mdm.theschool.edu to our LAN (ASM was able to communicate with our server using theserver.mdm.theschool.edu, so we know that it works). nslookup and the ping from inside the local network is theserver.mdm.theschool.edu without problem.)

    Because we cannot mess with the primary DNS for this project, I use the DNS on the mac mini and send all our subnet of mdm requests to this server.  All iPads use this server as a DNS server address and have no trouble accessing it. Any unknown applications are transferred to the primary DNS server.

    I created a domain in Open Directory for our local subnet (mdm.theschool.edu) and the captain the mini mac.

    When I try to save an iPad via the web site server, it fails and I only see it in the newspaper:
    Jul 22 15:23:21 salome xscertd-helper [2261]: could not find the CRL, unknown CA: F9D65C0B-42E7-4EBE-96A1-BB5F2EC0EF2C

    I use free free certificates.  CA in the message changes each time.

    I can download the certificate that I use for the iPad with success, just not register actually unit. I had a quick glance at all the certificates that I can see and they have all what looks like the correct CA in them.

    Where can I find more diagnostic information?  Why CA continue to change (corruption, something caused random data not specified...)?

    I could be wrong, but as I KNOW MDM will not work with free certificates, you need to get a certificate of push Apple related to one identifier Apple. You don't mention in your question.

    In addition, according to:

    https://help.Apple.com/ServerApp/Mac/5.1.5/#/apd05B9B761-D390-4A75-9251-E9AD29A6 1D0C

    "To use the Profile Manager as a service of mobile device management (MDM), OS X Server must have a static network address and a fully qualified domain name and may not be on an isolated network."

    C.

  • SPA112 registration fails?

    Hello!

    My SPA112(1.3.5 004p) fails to register for Vendranges. When you restart the unit everything works and recording work. After a while the departures of re-enrollment to fail and sometimes I get a recording failed before the re-registration started. My SPA112 is behind a router Netgear R7000 SIP ALG disabled. I really tried everything, including the demilitarized zone, Port Forwarding and QOS and NAT deaktivating filter, but it makes no difference. I also tried almost all the options with the SPA112. When the Fax via T.38 works great!

    I already have a detailed log of the process through Slogsrv. This is what happens if the save fails (XXX = personal information):

    SIP_tsClientEventProc(Event: 4)
    tryAltIp_delay() SIP_regTsEventProc(event: 4)
    CC_eventProc(), event: CC_EV_SIG_REGISTER_FAILED (0x3B), cover: 0, rating: 0, par2: (none)
    AUD_ccEventProc: event 59 vid 0 by 0 x 0 par2 0x0
    SLIC_stopRing
    SLIC_stopTone
    [0] RegFail. Try again in 10
    SIP_regTsEventProc(Event: 32)
    SIP_tsClientEventProc(Event: 3)
    [0]-> XXX:5060 (461)
    NOTIFY sip: XXX SIP/2.0

    Via: SIP/2.0/UDP 192.168.2.21:5060; branch = XXX

    From: "XXX" <> [email protected] / * />; tag = XXX

    TO:

    Call ID: [email protected]/ * /.

    CSeq: 87 NOTIFY

    Max-Forwards: 70

    Contact: 'XXX' <> [email protected] / * /: 5060; REF = XXX >

    Event: keep-alive

    User-Agent: Cisco/SPA112-1.3.5(004p)

    Content-Length: 0

    SIP_tsClientEventProc(Event: 3)
    [0]-> XXX:5060 (461)
    NOTIFY sip: XXX SIP/2.0

    Via: SIP/2.0/UDP 192.168.2.21:5060; branch = XXX

    From: "XXX" <> [email protected] / * />; tag = XXX

    TO:

    Call ID: [email protected]/ * /.

    CSeq: 87 NOTIFY

    Max-Forwards: 70

    Contact: 'XXX' <> [email protected] / * /: 5060; REF = XXX >

    Event: keep-alive

    User-Agent: Cisco/SPA112-1.3.5(004p)

    Content-Length: 0

    There is no password.

    The journal begins with the attempt to REGISTER (CSeq: REGISTRY 43236). This request has not been answered by server. He was retried several times until the time-out period. There are also unresponded NOTIFY at the same time (CSeq: 1 NOTIFY).

    Same for the request Cseqs 43238-43263 REGISTRY.

    It is not possible to decide at this level, it's all about network (queries are lost on his way to the PBX / responses are lost on their way to you) or PBX problem (the server simply not responding applications).

    Check the configuration of the values of registry expires and Reg retry Intvl ; They should not be defined for lower value than that requested by your provider or a filter anti-DoS on the PBX may consider your blocked IP. If there is no requirement of your provider, the 60 / 30 seconds should be considered minimums.

    Well, lets go back to save the analysis.

    First succesful REGISTRY is Cseq 43264/43265. NOTIFY Cseq 15 seems to be also reacted well. Right now, everything seems to work. Until the last REGISTRY Cseq 43273 success.

    With the check expire set to 60 that means there were about 10 minutes of successful registration.

    From 43274 REGISTER queries become again until 43279 unresponded. For example about 3 minutes of blackout.

    Application of REGISTRY 43286 is very important. He was answered by "500 Server Error". It may be that there is a question on the PBX. Of course, it may be a transient problem no importance as well.

    The rest of the journal reveals nothing important. successful registration periods are followed by periods of unresponded record and so forth.

    So final conclusion is - network or PBX problem problem.

    I'm no expert of Netgear, so I can't advice how to debug the network problem. You should ask to expert Netgear instead. Note that the 'problem of network' does not mean 'Problem Netgear'. The destination server may not be accessible isue anywhere on the network path.

    Depending on the cause of the PBX, there was only one "Server error". We must not overestimate. But you can ask your administrator to help PBX. Not only because of this error. It can verity REGISTER packets you come to him. So it can help you to verify the network path full of your part to the server (one-way) is broken or not.

    Unfortunately, all the logs of the phone allow not more specific findings...

  • Uninstall and reinstall Adobe Acrobat 8 Pro registration failed

    I uninstalled and reinstall Adobe Acrobat 8 Pro on my new machine. My new machine running Mac OS X 10.9.5. Whenever I try to click on help > registration, it returns an error message "unsuccessful record'"a problem has been experienced while trying to send information on the Internet".  I have no problem with the Internet connection. I was wondering why this is happening and is it possible that we can save this request.

    Hi Ksb2009,

    This version of Acrobat has never been tested on this version of Mac and is not supported.

    I suggest that you can upgrade to the latest version of Acrobat and works perfectly. It has loads of new and improved features that Acrobat 8.

    Kind regards

    Ajlan Huda.

  • I CAN'T GET THE WINDOWS MEDIA PLAYER! Self-registration FAILED with Visual Studio 2010!

    Hello world!

    I just bought the Visual Studio 2010 Professional Edition, registered and everything. I have the Windows XP operating system and I wanted to do a media player using WindowsMediaPlayer, I. I saw on YouTube that all you had to do was simply right click, add click on choose the elements and go to components and click on WindowsMediaPlayer. I couldn't find that if I used Google and found that he had to go in System32, then click wmp.dll. After I did, he said

    "Self-registration impossible C:\WINDOWS\system32\wmp.dll.

    I want this thing so BADLY!

    Any help would be VERY VERY LARGELY APPRECIATED!

    Thank you

    TheElevatorMaster

    Hello
     
    Your Windows XP question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the public to MSDN development.
    Please post your question in the MSDN Visual Studio category. 
     

    I hope this helps.

    Thank you, and in what concerns:
    Shekhar S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.
    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • ole32.dll registration fails

    Hi I need to register ole32.dll but it fails.  I get the following message:

    The module "ole32.dll" was loaded but the call to DLLRegisterServer failed with error code 0 x 8007005.

    I made in the framework of trying to solve a problem I have with MSOffice 2007 and an error message im done with this.  Until I have resolve the error im getting with register the ole32.dll I can't move foreword with the error of the Office.

    I've worked with office news groups that experts cannot help me more.  I can't register the ole32.dll, it would seem that it is a problem of vista originally my problem at the office.

    kind regards Gilly vista ultimate 64 bit sp2

    Hi Gilly,

    High and open command prompt. To do this, click Start, click programs, accessories principally made, right click Guest and then click run as administrator.

    Now, save the file Ole32.dll using the Regsvr32.exe. Ramesh Srinivasan, Microsoft MVP [Windows Desktop Experience]

  • Media Center to demand registration fails intermittently

    configuration:
    Vista Home premium 64-bit
    950 Hauppauge usb tv tuner, an ATSC signal

    Scheduled recordings work fine for a few days and then stop working. First sign of distress is a notification by the State which media center units failed to record a scheduled recording. Then if I open media center and you try to watch live tv, it is said that the tv tuner is disconnected. Shows Device Manager the device is connected and turned on. I can only restore functionality by disconnecting the tuner tv by the USB port, restart windows, and then plug the device back in. Things work fine again for a few days, but the problem is recurring. I tested the device on all USB ports available (rear, before and on the powered usb hub). I have updated all drivers for the tuner tv, graphics, sound, windows updates, etc.

    Problems and solutions does not have this problem. The ususally computer restarts, presumably after a blue screen, because I can tell that the computer has been restarted. The records are scheduled to start so I'm not here to actually see it happen.

    How can I determine the cause of these failures?

    Hi spm2004

    First check a updated driver for tuner card and also install all the updated optional equipment.

    Since you are facing so many problems with the system, you can try to run a SFC (System File Checker) scan to check if a system file is missing or damaged and check what is happening.

    (1) close all open windows.

    2) click on the Start, click on ' all programs"and click on"Accessories ". " "»»

    (3) with the button "command prompt" and click on ""run as Administrator ". "

    (4) in the window "Administrator: command prompt", type "sfc/scannow" (without the quotes) and press ENTER.

    (5) restart the computer after completing the analysis of the SFC.

    For more information, you can consult the method-the System File Checker tool in the following article:

    How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

    http://support.Microsoft.com/kb/929833

    Hope this information is useful.

    Jeremy K
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think

    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • Cisco Jabber registration fails.

    Hi, I have a problem with Cisco Jabber request the Android.It fails to sign the CCM.

    CCM version is 8.5, Cisco Jabber is 8.6.1, I followed the documentation

    http://www.Cisco.com/en/us/docs/voice_ip_comm/cumc/cisco_jabber/Android/86/Cisco_Jabber_Android_8.6.x_Admin_Guide.html#wp810478

    And everything looks good. DNS works, I can reach the CCM web portal on the phone's web browser.

    You have some tips how to troubleshoot, for example what newspapers is RTMT would be useful, or if there are balls on Jabber.

    Any help would be appreciated

    I changed the CUCM hostname under system-> server-> to the IP address of the CUCM and now the Jabber client is registered and to obtain the DN. But I'm unable to make or receive calls.

    Any help.

    Kind regards

    Abraham

  • BlackBerry Smartphones BLACKBERRY IDENTITY REGISTRATION FAILED

    Hi, so I'm having the same problem as quite a few people (I've been Googling solutions). I've updated my BB software yesterday and I also updated App World too so I don't know which is the origin of the problem:
     
    Whenever I go on App World, they tell me to update my identity as a blackberry and when I press Yes, it downloads all the way to the end, then displays the message: "failed to install of BlackBerry identity. Please try again later. "There is no error code. I have tried for 2 days to 'try later' obviously does not work. I tried the same thing with my wifi off and I also tried with my mobile network disabled. Since the BB site, I found information on the activation of the APN settings. It did not work. I also tried to "Enable insecure renegotiation", but checked anyway
     
    I am wary to try the suggestion on deleting app world and put it back, over the internet, it is because that whenever I try to download an application on the browser (when the download white screen comes up) it does not work either (I tried to download whatsapp and an app alarm) but it says "Download failed" and under details , he says «909 application authentication failure» I had the feeling that this has to do with my App World does not.
     
    It's extremely frustrating because I can't download anything and I also restarted my phone several times. Any help would be appreciated thanks in advance!

    I solved the problem of "update blackberry identity" by plugging my phone on my computer and reinstall the same software on it again. Then, the update of identity blackberry worked well and I was able to use app world new

  • Cisco SIP of SX20 registration failed

    Hello

    I want to share the issue we encountered on an endpoint Cisco SX20 fails to register on a VCS control using the SIP.

    Endpoint is running version TCNC6.2.0. The other points of current endpoint of running on TC5x.x, TC6.x.x, TC7.x.x has no problem.

    The endpoint can register on the VCS, but when we try to call one of the other endpoints, the call is not successful. Endpoint will ring and when we accept the call, there is no audio and video, then call disconnects. After disconnecting the call, endpoint failed to register on the VCS.

    We have tried to re - register again, restart the system, then tried to make another call. Same problem again.

    On the VCS, we tried to create a subzone of this specific endpoint (subnet) with treat as authenticated policy. Problem persists.

    We also tried to restore the codec to factory default settings, but did not solve the problem.

    Search for your advice.

    Thanks for the help in advance.

    Thanks & best regards,

    Acevirgil

    Since you are using the version code TCNC, any encryption will not work for calls, if force you encryption anywhere on the VCS or see the call to try like TLS in the call history?

  • Photoshop updates keep failing without explanation.  Can someone help me with this!  I can't find any useful content anywhere on the web... or here.

    Got a new computer, Photoshop disabled on the former, then downloaded and activated without any problems on the new computer.  He checked automatically updates available, and when he finished treatment through them, he said that everything has failed.  He suggested the problem setting in the list, but there is no error code and no problems listed. I am at a loss...  Have tried both a download and it does not help.  Of course this doesn't seem to be a recurring problem with many versions of Photoshop, but I can't seem to find a viable solution to my problem.

    Usually updates fail on the CS3 to CS5 series because of an outdated Adobe Application Manager.

    Visit this link:other downloads download and install the update to AAM for your Mac or PC. Restart your PC, open Photoshop and then try the updates again.

    Gene

  • Shared services registration failing when configuring EPMA 11.1.1.3

    Hi all, I am currently woking on essbase and any knowledge of planning so tried to update my knowledge. I installed epma 11.1.1.3 on workstation to VMware windows 2003 that I have windows 7 laptop. oracle 10g installation created a user/database (epma) patterns (sm, ms) is trying to set up the foundation, essbase, planning and reporting and analysis services. the configuration database and register with shared services has failed. I'm doing something wrong. I followed some configuration documents that are documented with screenshots are still unsure as to what I do. Please advice on how to avoid these failures.

    Here are the results of the validation of the configuration.

    Thanks in advance.
    Srinivas

    Oracle EPM system
    Diagnostic reports
    Generated 03/03/12 23:05
    Running on validation srinivas
    Validation tool Info: 11.1.1.3.0 drop 9-0 build 3129 2009-07-16 13:24
    Name of the operating system: Windows 2003
    Operating system version: 5.2


    Status Service Test Description duration of test
    Foundation of Hyperion
    A FAILED CFG: Configuration so check all configuration tasks are completed
    Error: The next tasks are not configured:
    relationalStorageConfiguration: Configuration failed
    Recommended action: try to set up the tasks mentioned 0s
    OPN FAILED: OpenLDAP Check if global roles number of not less than 16
    Error: $item.exception.localizedMessage
    Recommended action: 0 s
    OPN FAILED: connection OpenLDAP OpenLDAP
    Error: srinivas:28089
    Recommended action: open Start LDAP 1s
    The ERP Integrator
    CFG PAST: Setup WARNING: some even suggested not configuration tasks completed.
    Check if all configuration tasks have been completed 0 s
    Essbase / customer
    WR PAST: Windows registry check if EQD excel addin registered for Essbase Client 0 s
    Essbase / Essbase
    A FAILED CFG: Configuration so check all configuration tasks are completed
    Error: The next tasks are not configured:
    hubRegistration: Configuration failed
    Recommended action: try to set up the tasks mentioned 0s
    EAS FAILED: Essbase Server start the Essbase server check using the Maxl command
    Error: Result: unable to connect to Essbase server by using the command MAXL. Please check the essbase server is running.
    Recommended action: check Essbase server is started. 2 1
    SVR FAILED: external auditor Essbase Java API launch with the following command: admin C:\Hyperion\common\validation\9.5.0.0\launchEssbaseJavaAPI.bat EssbaseJAPIConnect * http://srinivas:13080/aps/JAPI srinivas
    Error: Result:-1; Error message: unable to connect to the olap service. Unable to connect to the Essbase server at srinivas. Exceeding the timeout to connect to the Essbase Agent/server using the TCP/IP protocol. Check your network connections.
    Recommended action: make sure that the external auditor is working. 7 s
    Essbase / Essbase Administration Services
    A FAILED CFG: Configuration so check all configuration tasks are completed
    Error: The next tasks are not configured:
    hubRegistration: Configuration failed
    Some of the suggested configuration tasks not yet completed.
    Recommended action: try to set up the tasks mentioned 0s
    Essbase / service provider
    A FAILED CFG: Configuration so check all configuration tasks are completed
    Error: The next tasks are not configured:
    hubRegistration: Configuration failed
    Recommended action: try to set up the tasks mentioned 0s
    Essbase / Smart Search
    CFG PAST: checking Configuration if all configuration tasks have been completed 0 s
    Essbase / Studio
    A FAILED CFG: Configuration so check all configuration tasks are completed
    Error: The next tasks are not configured:
    hubRegistration: Configuration failed
    Some of the suggested configuration tasks not yet completed.
    Recommended action: try to set up the tasks mentioned 0s
    Managing the quality of financial data
    CFG PAST: Setup WARNING: some even suggested not configuration tasks completed.
    Check if all configuration tasks have been completed 0 s
    Foundation / calculation Manager
    A FAILED CFG: Configuration so check all configuration tasks are completed
    Error: The next tasks are not configured:
    hubRegistration: Configuration failed
    Some of the suggested configuration tasks not yet completed.
    Recommended action: try to set up the tasks mentioned 0s
    Foundation / Performance Management architect
    A FAILED CFG: Configuration so check all configuration tasks are completed
    Error: The next tasks are not configured:
    hubRegistration: Configuration failed
    Some of the suggested configuration tasks not yet completed.
    Recommended action: try to set up the tasks mentioned 0s
    Foundation / workspace
    A FAILED CFG: Configuration so check all configuration tasks are completed
    Error: The next tasks are not configured:
    hubRegistration: Configuration failed
    Some of the suggested configuration tasks not yet completed.
    Recommended action: try to set up the tasks mentioned 0s
    FROM HTTP: Http is [C:\Hyperion\common\httpServers\Apache\2.0.59\bin\installhyperionapacheservice.err] s 0 empty file
    [FROM HTTP: string check Http [LoadModule jk_module modules/mod_jk] file[C:\Hyperion\common\httpServers\Apache\2.0.59\conf\httpd.conf] 0 s
    PAST REG: Register all links are present in the registry. 2 1
    Performance dashboard
    CFG PAST: Setup WARNING: some even suggested not configuration tasks completed.
    Check if all configuration tasks have been completed 0 s
    Planning
    A FAILED CFG: Configuration so check all configuration tasks are completed
    Error: The next tasks are not configured:
    hubRegistration: Configuration failed
    applicationServerDeployment: Configuration failed
    Some of the suggested configuration tasks not yet completed.
    Recommended action: try to set up the tasks mentioned 0s
    Profitability and cost management
    CFG PAST: Setup WARNING: some even suggested not configuration tasks completed.
    Check if all configuration tasks have been completed 0 s
    Strategic Finance
    CFG PAST: Setup WARNING: some even suggested not configuration tasks completed.
    Check if all configuration tasks have been completed 0 s
    Financial management
    CFG PAST: Setup WARNING: some even suggested not configuration tasks completed.
    Check if all configuration tasks have been completed 0 s
    Reporting and analysis
    CFG PAST: checking Configuration if all configuration tasks have been completed 0 s
    SVR FAILED: external auditor Essbase Java API launch with the following command: admin C:\Hyperion\common\validation\9.5.0.0\launchEssbaseJavaAPI.bat EssbaseJAPIConnect * http://srinivas:13080/aps/JAPI srinivas
    Error: Result:-1; Error message: unable to connect to the olap service. Unable to connect to the Essbase server at srinivas. Exceeding the timeout to connect to the Essbase Agent/server using the TCP/IP protocol. Check your network connections.
    Recommended action: make sure that the external auditor is working. 1 1

    Test start time: 23:05:18
    End of test time: 23:05:40
    Test duration: 21s

    Hi Srinivas,

    I suggest you to do separately from the configuration of the different components. First you configure shared services and continue with the other components.
    And also using the same relational database for all components is not recommended.
    Doing so will make you empty the things about it you give and would be easy to fix too.
    And I'm sckeptic on your database connection.

    Few things to check before you start the configuration.
    1. check are you can connect to the database on firewall problems.
    2 and also check the timeout values defined for the database.

    Kind regards
    Pradeep

  • MC container causes that code to fail... why?

    Hello

    Flash CS5 as3

    We have the institutions named with suffix _Level2 such as e.g. Mitre'sGate_Level2 as well as _Level3 and clips that are in a container MovieClip called Map_Collection.

    The code below fails with the error shown if the line of code in bold is used, it works with:-

    var clipName: String = String(e.item[s]).replace (r,"" ") + currentLevel.             If the colonies are placed directly on the stage.

    The code identifies Level3 or _Level2 at the end of the name of the button for example DistrictA_Level2 and adds it to the output of dataGrid on the sender.

    Which should read the code to solve this problem we've shed the heart and soul for 2 hours?

    Error: -.

    Map_Collection.mitre'sGate_Level2

    TypeError: Error #1010: a term is undefined and has no properties.

    at BusMap_fla::MainTimeline/ShowSymbols()

    at flash.events::EventDispatcher/dispatchEventFunction()

    at flash.events::EventDispatcher/dispatchEvent()

    to fl.controls::SelectableList/handleCellRendererMouseEvent()

    to fl.controls::DataGrid/handleCellRendererMouseEvent()

    Code is: -.

    dg.addEventListener (ListEvent.ITEM_ROLL_OVER, ShowSymbols);

    function ShowSymbols(e:ListEvent):void {}
    makeAllVisibleF (false);
    var r: RegExp = \W/g;
    for {(var s:String in e.item)
    trace (currentLevel)
    {if (e.Item [s])}
    var clipName: String = String(e.item[s]).replace (r,"" ") + currentLevel.
    trace (clipName)
    This [clipName] .visible = true;
    trace (s, e.Item [s])


    }

    }

    }

    function makeAllVisibleF(b:Boolean):void {}

    MITRE'sGate_Level2.visible = b;
    UpperDowning_Level2.visible = b
    Map_Collection.Tamar Brook_Level3.visible = b;
    Map_Collection.mitre'sGate_Level2.visible = b;

    This code works on sttmnts directly on stage.

    I'm showing here an excerpt from the visible code = b; What follows. We have such for each sttmnt. The first two lines are for those not in the container of MC.

    If we use: -.

    var clipName: String = "Map_Collection". + String(e.item[s]).replace (r,"" ") + currentLevel.

    who is our best shot after trying various options, it will fail with the above error.

    In the code, my compatriot is said!

    That's what we want to

    Map_Collection.mitre'sGate_Level2.Visible = true

    It does not work

    Map_Collection.this [clipName]. Visible = true

    It works, when Mitre'sGate_Level2 is placed on the floor

    MITRE "sGate_Level2.visible = true

    Placing the Mitre'sGate_Level2 in clip Map_Collection how do we get to work

    We tried a variety of options, same replacement of 'this' with Map_Collection.., my best shot, just what should be the code?

    Envirographics

    You cannot use a string that has the notation by written point inside the target objects, such As... 'Map_Collection.anything '.  Each object must be isolated in targeting.

    You must do something more in the sense of...

    {if (e.Item [s])}

    var clipName: String = String(e.item[s]).replace (r,"" ") + currentLevel.

    Map_Collection [clipName] .visible = true;

Maybe you are looking for

  • Dynamically add curves to the xy graph

    Hello I take a few steps and want to display in a chart. Basically, I want to use a chart xy to display everything first, a single curve (measure 1) then two curves (1 + 2) and so on. I need to adjust some things for each measure, based on the previo

  • CSC analog inputs, for example, ai07 or ai13 modules

    On the CSC-I like the I-07 series, what is the relationship between the inputs of channel physical (ai0 ai1) as seen in measurement and information Explorer (MAX) compared to the 1-2 and 3-4 module PIN numbers? Pins 1-2 are the same as ai0 and pin 3-

  • SimpleSave 1 TB Drive Blue LED

    Hello I have the SimpleSave 1 TB drive and working with VISTA 64-bit. If the computer is proven, the drive blinks all the time with the blue LED. It bothers me if I'm sitting on the desk. What kind of error messages if the flashing indicate?

  • XP Home: What are the causes of 10% CPU usage and how to reduce this happening?

    Hello Quite often my PC experience this problem right after the start or in the middle of surfing. The system stops responding and I have to often press CTRL ALT DELETE and restart my PC. My RAM is 1.5 GB is sufficient for private users with multitas

  • How can I retrieve the shortcut icon (Geek Squad) who disappeared from office fom

    I had a shortcut icon on my desktop which seemed to have disappeared. I may have inadvertently moved... How can I get it back? Help