Registry failed with an IOException on Simulator

Similar Questions

• Failed to install Microsoft Flight Simulator. Will not pass the installation wizard.

  Failed to install Microsoft Flight Simulator, Version Deluxe 2010. I am running Windows 7 Ult 64 bit. The program will not install, it's an error that it cannot find the file. I tried everything, but it does not install. This is the full version of three discs.

  Following up on this question. I have install and it will go through the wizard of the insulation. Then, it will come with a large screen. He stays there and then says after 15 minutes. «Unable to launch vcredist_ * 86.exe.» I press ok and a error number "the system cannot find the path specified in 3. Press ok and then it states that the system has not changed except for... »

  I am convinced that Flight simulator is not intended to be run on a 64-bit computer that is very disappointing. I have a program which should install without all the aggravation I had to endure. If you run them 64-bit machines do not buy this product. I tried since it first came out. I feel at the moment where I get it going it will be a version dated date out. Wait until there is a version dedicated 64-bit, you will save yourself a lot of grief. I have an Asus dual core Centrino 2, 2.6 GB h. computer laptop with 4 GB memory. I install my DVD direct program. It worked when the computer is a 32-bit computer.

  Clive Ballantyne

  What finally worked for me when I tried to install MSFSX Gold Edition has been that I copied the disc 1 FS to my office.  Then I copied the contents of the FS 2 disc and put the files in the same folder.  When're asked you if you want to replace the files with the same name on both drives say no.  It seemed to work well for me when nothing else did.

  I haven't read of anyone doing this exactly, it's my own invention/workaround bit AFAIK. Hope this works for all of you who cannot make it work otherwise.

  System:
  ASUS G50v-t
  Intel Core 2 Duo Centrino 2, 2.26 GHz
  NVIDIA GeForce 9800 m GS 512 MB
  4 GB of Ram
  Windows 7 Professional 64 bit

• Windows update fails with 0 x 80070424 among others (update agent will not install)

  I tried to install iTunes 9.2 on my computer of girls running Vista 64 sp1.  It failed several times with an error message encrypted with public keys and RCH80.  I took this down to a problem of lack of security patches.  In the process, I noticed that Windows Update has been fails with error 0 x 80070424, indicating a required service was not running.

  so I downloaded sp2, also the operation failed with error 0 x 80070424 even.  I checked the Background Intelligent Transfer and start-up and running (so I restarted), I checked Windows Update and it was also running and so I restarted.  Same result.  I've disabled UAC and restarted.  Still no joy.

  Then I read an article on the subject, said a service called "Automatic updates" should be running, not only he was not running, did not exist. Some that I've been on something I downloaded "windowsupdateagent30 - x 64 .exe" to install the service.  Unfortunately, this fails with a fatal error, no number error, simply "windows has encountered a fatal error.

  It is where I am at this time - trying to figure out a fix for this.  Thank you.  (I also disabled AV, firewall, etc., ran several antivirus scans, malware scans including Malware Bytes, AVG and Avast and MS Defender and rootkit detectors which come clean).

  OK I found this user Mohsen Arjomand:

  Step 1: Manually replace the corrupted Windows Modules Installer
  ==================================
  Step 1: Change the owner of the file maintenance
  1. click on start. In the search bar, type "%windir%" (without the quotation marks
  marks) and press ENTER.
  2. click right maintenance folder and click 'properties '.
  3. click on the Security tab.
  4. click on advanced.
  5. click on the owner tab.
  6. click on edit.
  7. under "change the owner of ', select the administrator account. Click
  "Replace the owner of subcontainers and objects". Click OK.
  8. click on OK. You may receive an error of "deny access". Just move forward.
  9. in the Security tab of the properties of maintenance records, click on change.
  10 select Administrators, and then grant him "total control".
  11. click on OK.

  Step 2: Manually restore the missing file
  ============================
  1. download and save the file http://www.4shared.com/file/197624120/979be69/fix.html on the desktop form fix.zip.
  2. extract the two files. TrustedInstaller.exe and TrustedInstaller.reg.
  3. copy the file TrustedInstaller.exe in C:\Windows\servicing folder.

  Step 3: Registry backup
  ===================
  1. click on start. Type REGEDIT in the search bar and press ENTER.
  2. Select the computer (the root node) in the left pane, click export under the
  Menu of files, choose all under the scope of the export, select desktop in the Save in box
  and type backup in file name. Click Save.

  After that, please refer to the following procedure to import the registry key.

  Step 4: Import TrustedInstaller.reg
  ===========================
  1. double-click on the TrustedInstaller.reg file in the file Fix.zip.
  2. click Yes when you are prompted to import.

  Restart the computer and check if Windows Update works.

  And then manually install the components of update as stated in...

  http://support.Microsoft.com/kb/949104/

  Voila!

  It's annoying that it is a known problem with the trustedinstaller.exe being corrupted and or deleted, but it is so hard to find an answer to the question.

• All security updates fail with the error A 80071, 91 code

  Hello!

  System information: Windows 7 Ultimate 64-bit, i7-720QM, 6 GB RAM, 256 GB SSD, ATI 4670 [Dell Studio XPS 1645]

  Background:

  • UAC was arrested. Turn on UAC stop my gadgets to work [another thread on these forums...].
  • A week ago, I got speech recognition works only with a local edition. Insert this ctfmon '=' CTFMON registry entry. EXE, to HKLM\Software\Microsoft\Windows\CurrentVersion\Run, fixed the problem. However, I can't find to this registry entry.
  • Four days ago, I had slow internet speed. I did a 'Complete' Microsoft Security Essentials scan and it found many exploits (Explot: Java/CVE-2009-3867.) BX, TrojanDownloader / OpenConnection.AK, TrojranDownloader:Java / Rexec.c and a dozen others). I removed all the. The internet speed is back to normal.
  • This morning, I have updated the firmware on my SSD to activate the TRIM. I restored an image of the drive I did with Windows Backup and Restore just before updating the drive.

  Problem:

  • I tried Windows Update after update of the SSD. It downloads all updates, installs, and prompts you to restart the computer to complete the installation. During the shutdown, some files are 'configured '. Upon restart, during the boot of Windows GUI (circles of flight), there is a break-up of the code, something about the registry. On logon, it gets "35%" and says so "returning default configuration updates,' or something like that. I get a notification indicating that the updates failed.
  • On Windows Update, only Silverlight, Windows malicious software removal, MSE definition updated and updated Office Publisher are successful.
  • All other updates (security updates, cumulative updates, security updates for IE, updates for Windows) fail with the error code A 80071, 91.
  • If you are looking for updates that fail, here they are: KB2416400, KB2296199, KB2305420, KB2385678, KB2423089, KB24236673, KB2442962, KB246759 and KB2443685.

  What I tried:

  • Disk Cleanup attempt (and unfortunately removed all restore points). Did not work.
  • Attempt to sfc/scannow. He found a few files, that it could not correct; I have the CBS.log newspaper if you need. However, updates still do not work.
  • Tried to reset the resource manager to file with "fsutil resource setautotest true c:\ ». She is successful. However, after the restart, the updates still do not work.
  • Tried a Full scan with MSE. No anomaly.
  • Tried to reset components to update Windows (using the Vista Fix - It via KB971058). Updates still do not work.
  • Attempt of Microsoft Malicious Software Removal Tool (updated dec 2010) Full Scan, no malicious software was detected. Updates still do not work.
  • Attempt of Anti-Malware analysis complete Malwarebyte, no malicious software found. Updates still do not work.

  I don't think that this is malware, but a Windows problem... My internet is wobbly for these last two days, a lot of packet loss (pages only "" half load, some missing frames, etc.). Not sure if this is related, but it downloads the updates very well. It is not always the marker "35%".

  I'm out of ideas. What's next?

  Thank you

  ~ Ibrahim ~.

  1. about 1 year, I installed MSE.

  2 McAfee has been preloaded; the subscription was updated (in a 90-day trial), and I uninstalled McAfee completely (regular uninstall and Removal Tool provided by McAfee).

  3. Yes, for about 30 minutes before I uninstalled and installed MSE.

  4. Yes.

  However, with a little help seven forums, we have figured out it is the registry. I did a reinstall and then the updates installed correctly.

  Thanks for the help, if! :)

• Can not register opimize: when I start computer, a window opens opimize the registry failed

  When I start computer a window opens opimize the registry failed

  Hi Harry,.

  Looks like you have some program registry installed and programmed to run at startup, which does not work.  I suggest we identify and remove the boot and then remove it totally from the system (uninstall).  Registry modification programs are generally risky, rarely do much good, can cause great harm and are not really necessary as Windows does a good job of managing the registry on its own.

  Try a boot minimum http://support.microsoft.com/kb/929135.  If the problem goes away then it's just a matter of tracking down the culprit at the origin of the problem.   Follow the procedures described in the article.  Once found, remove, delete, disable or uninstall.  Once don't forget to reset your operating system to normal status, as described in the procedures. If the problem occurs in clean mode then just restore the system to normal and reboot - this solution will not work.

  Start in safe mode with network and see if the problem is here.  A result allows us to narrow down the search for the cause.

  I hope this helps.

  Good luck!

• Home Vista premium: KB978338 fails with the error code 80004005

  Cannot install other updates windows update screws. Impossible to find answers to this specific problem, all the links seem to point to XP or windows 7

  Went to the Microsoft site and just tried to download and install just the fix KB978338, watched as she worked, system has rebooted with what looked like 266/266/registry component machine appearing on the screen just after the message of the HP bios and just before loading windows.  The PC then realized... Updates not configured correctly - returning changes.

  Seem to be stuck in this loop that KB978338 will not install and stops all other updates installation as all fails with the error code 800F0826.

  Hi gbislay,

  I think that you are able to get on the desktop after changes have been restored.

  Step 1: Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  Step 2: Download and run the system update tool. This tool runs an ad hoc analysis of inconsistencies that might prevent future maintenance operations.

  The system update tool

   

  Step 3: Clean boot the computer

  Follow step 1 in the link below,

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Important: n ' forget not to put the computer to follow normal start-up step 7 in the link.

  Step 4: Disconnect all external devices (printers, scanner, USB (universal serial bus) readers, etc...) Except the mouse and keyboard and then try to install the updates.

  You can see the steps outlined in the article below, which deals with a similar question

  Windows Update error 800f0826

  The update is not installed successfully, you receive a message, and the computer restarts when you try to install an update in Windows Vista and Windows 7

  Service pack Windows Vista and Windows Server 2008 install fails with error 0x80004005

   

  Note: Steps to solve the problem of Windows Update for Windows 7 is valid for Windows Vista.

  Thanks and greetings
  Ajay K

  Microsoft Answers Support Engineer
  ***************************************************************************
  Visit our Microsoft answers feedback Forum and let us know what you think.

• KB2686509 repeatedly fails with ErrorCode 0x8007F0F4

  KB2686509 repeatedly fails with ErrorCode 0x8007F0F4

  It is obsolete

  I wrote a VB Script to solve two problems when running microsoft KB2686509 security update

  HKLM\SYSTEM\CurrentControlSet\Control\Keyboard Layout
  and
  HKLM\SYSTEM\CurrentControlSet\Control\Keyboard layouts

  for those who are not freaks of registry.

  Here you can download my little fix in the ZIP file.

  What is doing? No magic!

  1 made a backup of the registry

  2 remove the entries with the keyboard

  3 checks each keyentry in Keyboard Layouts against file in %SystemRoot%\System32

  Hope I have someone help with this script.

  Concerning

  Germany Christian

  Updated 2012/06/03

  I wrote a batch file too. If you use this place the vbs solution.

  It is a little more difficult, because the batch file exports the two keys, the destroyed, creates the empty entries. Then, you must rerun the KB2686509! After this do not restart, press on continue in the command window (restoration of the old entries) and then restart.

  If one of the buttons (bad) does not exist, the command file creates an empty entry, so KB2686509 should work.

  Here you can download the http://www.vivus.net/dl/ batch file

• Service Pack 2 for 32-bit edition of Microsoft Office 2010 (KB2687455) failed with Windows XP

  Service Pack 2 for 32-bit edition of Microsoft Office 2010 (KB2687455) failed with Windows XP.  I applied microsoft AutoCorrect (Mr. Fix) and 4 registry commands in the article of knowledge, but it is always a failure.  Help?

  Service Pack 2 for 32-bit edition of Microsoft Office 2010 (KB2687455) failed with Windows XP.  I applied microsoft AutoCorrect (Mr. Fix) and 4 registry commands in the article of knowledge, but it is always a failure.  Help?

  Any specific error message?

  Download and install SP2 manually: -.

  http://www.Microsoft.com/en-au/Download/details.aspx?ID=39667 (32 bit)

  http://www.Microsoft.com/en-AU/Download/details.aspx?ID=39647 (64-bit)

  If in doubt about whether or not you are running 32-bit or 64-bit, see this topic:

  http://social.msdn.Microsoft.com/forums/Office/en-us/043198a3-e2a0-45b5-85A4-2aa4abb5cc82/how-to-determine-if-user-has-Office-2010-32-bit-vs-64

  If you still have problems, try to update in a clean boot state:

  http://support.Microsoft.com/kb/929135/en-AU (don't forget to return to a normal startup when finished).

  Office updates may fail if the update files, look for the original installation files. Sometimes the complete file download remedies this problem or put the installation media in the installation drive can also help. If still no, you may need to do a repair installation.

• Windows updates fails with the 0X8007F064 error code

  Title: Windors update fails with Ox8007F064 failure code.

  This is a cumulative update for ActiveX Killbits for Windows XP.  I have tried Microsofts avenues and attach it to the M..  I ran Spyware, Malware and I continue to get the message that I have to update Windows, but it won't and gives me the Ox8007F064 fault code.  I can't find information about this code or help at this stage.

  Hello

  -What is the FIXIT have you tried to solve this problem?
  -Respect the limit with the specific update? If so, what is the update's KB number?
  -Did you do changes on the computer before this problem?
   
  Method 1: Run the Microsoft FIXIT from the link and if the problem persists.
  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058
  Warning: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows XP?
  http://support.Microsoft.com/kb/322756/
   
  Method 2: I also suggest you to follow the steps from the link and check if it helps.
  You cannot install some programs or updates
  http://support.Microsoft.com/kb/822798
  Warning: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  How to back up and restore the registry in Windows XP?
  http://support.Microsoft.com/kb/322756/
  Note: You can ignore the 7 method to perform the upgrade in-place.

  Method 3: If the problem persists, I also suggest that you install the updates in clean boot mode and check.

  Step 1: I suggest to maintain the computer in clean boot mode and check if the problem persists.
  A clean boot to check if startup item or services to third-party application is causing this issue.
  You can read the following article to configure the computer to boot:
  How to configure Windows XP to start in a "clean boot state"?
  http://support.Microsoft.com/kb/310353
  Note: After you have used the boot is a way to solve your problem, you can follow these steps to configure Windows XP to start normally.
  1. Click Startand then click run.
  2. Type msconfig and click OK.
  
  The System Configuration utility dialog box appears.
• Click the general tab, click Normal Startup - load all device drivers and services, and then click OK.
• When you are prompted, click restart to restart the computer.

Step 2: Try to install the updates manually and check.
http://www.Microsoft.com/en-us/download/Windows.aspx?q=Windows&WT.mc_id=MSCOM_EN_US_DLC_ICONNAV_121LSUS007799

For reference:

Solve common installation issues in Windows Update, Microsoft Update and Windows Server Update Services

http://support.Microsoft.com/kb/906602

To update history:
(a) click Start.
(b) click on all programs, then select Windows Update.
(c) select view update history.
 
Hope this information helps.

• KB 2686827 fail with the error Code Ox800B010B

  KB 2686827 fails with the Ox800B010B error code

  Hello Hans,.

  1. what happens when you try to install the update?

  2. you receive an error message or error code when you try to install the update?

  3. you are facing this problem with this particular update or are you facing this problem with all the updates?

  I suggest you to follow the steps and check if it helps.

  Method 1: Perform a clean boot, and then check if it helps.

  H OW to configure Windows XP to start in a "clean boot" State

  Note: Make sure you perform the steps in How to configure Windows to use a Normal startup stateto start your computer normally.

  Method 2: Follow the link and run Microsoft Fix - it, and then check if it helps.

  Diagnose and automatically fix common problems with Windows Update

  Method 3: Install manually updates, then check if it helps.

  To install updates manually by following the steps mentioned below.

  (a) go to http://www.microsoft.com/download/en/default.aspx

  (b) research updates using the KB number for the update.

  (c) download and install it.

  Method 4: Reset Windows update components, and then check if it helps.

  How to reset the Windows Update components?

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/ )

  How to back up and restore the registry in Windows

• KB2656353 install fails with error 0 x 643

  Dear Microsoft support community,

  (a) I have Windows XP Professional SP3.  I haven't used this computer
  in almost a year, so the first thing I did was to hang the
  computer, connect to the Internet and run Microsoft update.
  There were 78 updates and 75 of them were installed successfully.
  (b) when I tried to install KB2656353, the installation failed with error
  0 x 643.
  (c) Googling turned up to http://support.microsoft.com/kb/976982 .
  I tried the Microsoft Fix it 50123, but which did not help.
  (d) I repaired then the .NET 4 Client Setup.  No joy.
  (e) I ran the auditor of .NET tool to
     http://blogs.msdn.com/b/astebner/archive/2008/10/13/8999004.aspx

  And he noted "the check is successful" for
     
  .NET 1.1 SP1
  .NET 2.0 SP2
  .NET 3.0 SP2
  .NET 3.5 SP1
  .NET 4 client
  .NET 4 full

  (f) I have concluded that uninstall and then reinstall the whole .NET
  framework was not claimed for now, since it does not seem
  as indicated in KB 976982 corrupted.

  (g) I checked the registry for .NET 1.1 hotfixes listed issues
  in http://blogs.msdn.com/b/astebner/archive/2004/11/23/268934.aspx
  in the "Info 9002..." section, but I have not found any.

  (h) I downloaded the update in a separate file,
  NDP1.1sp1 - KB2656353 - X 86 .exe, to http://download.microsoft.com,.
  and tried to run as a standalone program, but it stops almost
  immediately.  By redirecting the logging to a local file, I find
  the update has not been installed, but I do not know how to interpret
  the log file, which is much too large to be able to post it here in its entirety.

  How can I get this update to install?

  Related post on the same question:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_update/cant-install-update-kb2656353/744caf0c-4450-40DE-BB8F-cf4ca2ee565d

• OfficeJet Pro 8610: driver installation fails with an error on hpvyt13.inf persistent 1627

  The printer driver installation fails with:

  Setup error

  Call to DrierPackageINstall returned error 1627 for package
  "C:\Program HP HP Officejet Pro 8610\DriverStore\Yeti\hpvyt13.inf"

  Tried to install base drivers and a full suite as a user and administrator. Also tried a clean boot (close unnecessary services and restart). I went to look for the file in question, but it does not appear to exist (there is no HP directory in Program Files).

  Hello

  This can happen for several reasons, most common duration to a problem with the registry permissions.

  I would suggest trying the following tool, it is a 3rd party utility that analyze and repair registry permissions, and so you can use it at your own risk (I used it several times without any problems):

  http://www.MajorGeeks.com/mg/getMirror/tweaking_com_reset_registry_permissions, 1.html

  Click the Start button and let a few minutes (it may take some time, about 5-10 minutes), the journal stated: "" once it ends.

  Then try to reinstall the HP software and check for the difference.

  If the same continues I suggest contacting HP sopport to continue such troubleshooting.

  You can find the detais contact for your region below:

  http://WWW8.HP.com/us/en/contact-HP/WW-contact-us.html

  Hope that helps,

  Shlomi

• Windows Powershell 2.0 and WinRM 2.0 for Windows Vista (KB968930) update - fail with the error 800b0100 Code

  Original title: several installation update of Windows Powershell 2.0 and WinRM 2.0 for Windows Vista (KB968930) but fails with the error 800b0100 - tried Code recommended fixed but nothing works - any ideas? Alan R

  Installer standalone and patches already installed - laptop Medion used - all other updates loaded ok - also tried PC Tuneup of Maestro.

  Hi Alan,

  Thank you for visiting Microsoft Community.

  To resolve the problem with the installation of the updates, follow these methods:

  Method 1:

  See the article and check if that helps:

  Error 0x800B0100 when you try to install updates for Windows or Microsoft Updates

  Method 2:

  Important: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  For more information about how to back up the registry, see the link:

  Back up the registry

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

  I suggest that you follow the steps described in the article and try to reset Windows Update components:

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  I hope this helps. If you have additional questions on the computer, please ask your question about Windows and we will be happy to help you.

• HTTP POST will fail with the status code 400

  Hello

  I am trying to DISPLAY some data but my code still fails with code 400. I tried to change the URL and the method and adding different headers but I get the same answer. What I am doing wrong? My code is below.

  HttpConnection connection = null;
  DataOutputStream outputStream = null;
  
  try {
  connection = (HttpConnection) Connector.open(serverUrl);
              connection.setRequestMethod("POST");
              connection.setRequestProperty("Content-Type", "application/json;charset=UTF-8");            
  
              outputStream = connection.openDataOutputStream();
              outputStream.write(new String("test").getBytes());
  
              outputStream.flush();
              outputStream.close();                       
  
              if (connection.getResponseCode() == HttpConnection.HTTP_OK) {
                  isSuccess = true;
              } else {
                  failureMessage = "Error message " + connection.getResponseMessage();
              }
          } catch (IOException e) {
              failureMessage = "IOException: " + e.getMessage();
          } catch (Exception e) {
              failureMessage = e.getMessage();
          } finally {
              if (outputStream != null)
                  try {
                      outputStream.close();
                  } catch (IOException e) {
                      // Nothing to do
                  }
              if (connection != null)
                  try {
                      connection.close();
                  } catch (IOException e) {
                      // Nothing to do
                  }
          }
  

  In the end, the solution was to add "interface = wifi" at the end of the URL. I guess I'll have more problems when I switch to 3G, but for now it's ok.

  @Peter,

  I just wanted to say your responses in this forum have always been invaluable and led me to the right solutions. Your posts here and here were very useful to fix this that I had spent several hours on. So thanks a lot!

• error packaed and launch: Oh, Snap! Build request failed with the message: [ERROR] an archive or directory does not exist in the specified path:

  Hello

  I get this error when you try to run the sample of cards on the corrugation Simulator:

  Oh, Snap! Build request failed with the message: [ERROR] an archive or directory does not exist in the specified path: "/ Users/Calgacos/Library/Application Support/Google/Chrome/Default/Extensions/cnijnnaimeaacneklcndcafbnkeicckh/0.9.16_0/services/node/node_modules/rbd/Packaged/Maps.zip".

  The .../rbd/Packaged folder is writable and the Maps.zip will be created in the folder ~/RippleSites/Maps/Packaged.  With the help of Mac, the latest versions of everything.  The application runs in undulation ok, but I can't throw on the SIM BB10.

  Someone else have this error and know why?

  PS the Maps.zip does not get created (or copied) in specified folder, of course, but why?

  PS try another application and it worked but is too has not put its zip file into the folder... rbd/Packaged.  I guess it should not but leaves me clueless as to whats wrong with cards.

  Thank you

  The two directories (in the extensions directory and maps project directory) have permissions to 777.

  But you gave me an idea...

  It turns out that simply by putting

  "Packages".

  in setting output wasn't enough, I need the full path

  for example: "/ Users/username/RippleSites/Maps/packed."

  and presto, now it works!

  Thank you!