Reinstall after the new hard drive

Similar Questions

• Satellite C650 - reinstall with the new hard drive

  Hello

  The hard drive in my C650 just died so I put in a replacement, and the problem I have is that I never create a recovery disc for my laptop.

  I tried to use the windows disk 7 I got with my desktop, but when I boot it I get the error ' A required CD/DVD drive driver is missing. If you have a flash driver diskette drive, CD, DVD or USB, please insert now. ".

  So, I downloaded the driver for chipset support page and excerpts to a flash drive. The installation detects these drivers "ICH9" on my USB, but after loading them, I always get an error ' no new deices could be found. Make sure that the driver files are correct and located on the driver installation media. ».

  I checked the bios and the new hard drive is detected without a doubt.
  Is there anything else I can do, short of ordering toshiba recovery disks?

  Thank you!

  Hello

  The message
  > ' Required the reader driver CD/DVD is missing. If you have a flash driver diskette drive, CD, DVD or USB, please insert now. ".
  say that your CD/DVD drive is not detected.
  So you need to check if the BIOS so the CD/DVD drive is listed. It should appear on the first page of the BIOS.

  If you want to boot from the disk and then switch on and you press F12.
  Usually, a menu should appear that allows you to choose the ODD (CD/DVD)
  Choose this option and try to boot from the CD.

• Portege 3500: OS crashes after the new HARD drive update

  I have a problem with the new hard drive - Seagate Momentus 100 GB 7200 rpm, ATA - and...
  instalator blue screen starts normally (from recovery CD or OEM CD) and when partitioning is startis - system is stopped...

  HARD drive is ok - tested on another laptop
  Laptop is ok? instalator and works windows, tested on 2 HDD (40 and 60 GB, two IBM)

  It is possible, that this new hard drive is not compatybille with this laptop?

  Please help, because it's my boss laptop :(

  P.S. - sorry for peut English

  Hello

  Are you sure that the HARD drive is recognized correctly in the BIOS?
  Seems that the laptop does not support the new drive (100 GB, 7200 RPM).

  Perhaps because of the large size of HARD drive and the fast rotation value.
  I would try to use a 60GB 5400 RPM a 80 GB HARD drive maybe works but it seems that the 100 GB HARD drive is not compatible

• Re-installing Linksys Connect on mobile after the new hard drive installed

  I have a router E4200 and had loaded on my laptop Connect. My hard drive crashed and needs replacement. I have had no problem signing on my WiFi once I got the new installed hard drive.

  With the new hard drive, I now do not have Linksys Connect installed on my laptop. My question is: can I re - install connection with the router works perfectly good or re-setup Connect with the router already up and running will cause me problems?

  Thanks for any help.

  Here is an article on the configuration of the software once the router has already been put in place.

  http://KB.Linksys.com/Linksys/UKP.aspx?pid=80&app=VW&VW=1&login=1&JSON=1&docid=90fabd0b3674497489d42...

• After the new HARD drive does not start installation Qosmio G15

  I just got this G15 last week and one of the hard drives was bad. Put it in a new Bay 2 and it does not start. I took it back and it starts fine. I even changed the main hard drive Bay 2 HD and it starts up fine with a hard drive. It's something to do with the scores, I think. Any help appreciated.

  Hello
  I think that the boot order has been the bad HARD drive in the BIOS.
  At the new disk you do not installed any OS, and in my opinion, this is a reason for starting problems.
  Simply access the BIOS and change the boot order

• Problems of new messages after the new hard drive installed.

  Just had to have a new hard drive, motherboard, and installed video card. Used to be I could click the "e-mail" on my desk and my new email would open automatically when the Windows Mail open. Now, I can't my new e-mail unless I have manually click on the send/receive button. I have the parameters monitored to check for new messages every 5 minutes. What am I doing wrong now?

  Thanks for any help!

  Yes, I use Vista, funny... it's windown help that popped up for me! Sorry!

  It is ok. For most wanted if sure we had dealing with. This is the forum for Vista for the future.

  Vista implemented network, electronic mail and to get online
  http://social.answers.Microsoft.com/forums/en-us/vistanetworking/threads

  Tools | Options | In general. East: send and receive at startup checked? Also try to set it to 6 or 4 minutes. Send yourself a test message and immediately close WinMail. Wait a minute, then open a WinMail. A little luck?

  Bruce Hagen
  MS - MVP October 1, 2004 ~ September 30, 2010
  Imperial Beach, CA

• EliteBook 2570p: Windows 7 Pro OEM activation error after reinstall onto the new HARD drive

  Greetings!

  I had to replace my laptop HARD drive and then clean installed windows iso downloads, burned on a dvd.

  I first tried Windows 10 (build 1511), then Windows 7 Pro 64 bit with SP1. Or activate using the key OEM COA sticker.

  I tried MS activation of phone also, but they said that they could not generate a confirmation key. They tried to transfer me to "get windows up and running support" but could not get through.

  The first activation says invalid key without being connected to the internet, which makes me wonder if there is an inconsistency between my product key and SLIC data, (which I do not have much understanding).

  The service 'Ask Tech' at Microsoft tried to sell me a license at a high cost, which I don't think I should need because I have the license OEM Windows 10 retail.

  I don't have HP recovery disks (and did not expect to need).

  Any advice would be welcome!

  (the location is the South Africa)

  NoKillBill

  The problem is that you should NOT use Win7 ISO downloads to reinstall your PC.  Given that your PC came with a preinstalled HP Win7 OEM version, and is NOT available for download, I have to assume that what you used to reinstall a retail version.

  And the problem is that the commercial version only lights up with a retail key.  The product key that came with your PC and is printed on the COA sticker, is a key to OEM HP product - and that cannot be used to activate any other than the version from HP OEM version of Win7.

  Your best bet at this point, is to restore your PC using HP recovery media - and then perform the upgrade of Win10 after that.

  It is a DVD and CD set that will erase the hard drive (removing all data, applications and settings, reinstall the original OS, drivers and utilities for HP. In some cases, you will be able to order a USB instead of discs.  You must order at HP; they cannot be downloaded.
  
  You can look online for recovery from the paged media related: http://support.hp.com/us-en/drivers
  
  Once there, enter your product name or number. On your software page and download the drivers, select your operating system and version. Click on "Update".  If the HP recovery support is available for your computer, down near the bottom of the page, you will see an entry for the command Recovery Media-CD/DVD/USB. Click on the symbol '+' to expand this entty and click on order to press for more details.
  
  Or, if you prefer, you can do the same by contacting HP Customer Service:
  
  If you live in the United States or the Canada, details are on this page: http://www8.hp.com/us/en/contact-hp/phone-assist.html#section1
  
  If you live elsewhere, contact details are on this page: http://www8.hp.com/us/en/contact-hp/ww-contact-us.html
  
  Note that if HP no longer provides a recovery media for your model, a few other sites, you can check are: http://www.computersurgeons.com/ and http://www.restoredisks.com/
  
  Good luck
  
  I'm a volunteer and I do not work for, or represent, HP.
  ========================================================================
  If you feel that my suggestions helped you, please click on the thumbs-up symbol to say thank you!
  
  If they helped to solve your problem, please click 'Accept as Solution' to help others find similar information.

• Reinstall Windows Media Center under Windows 7 Ultimate after the new hard drive, installed using Microsft Windows 7 disc

  I had the misfortune I had to replace my hard drive on my Toshiba laptop after reinstalling my Windows 7 Ultimate disc, I find that I am unable

  load the Windows Media Center software. When I click on the location of the file, some files are visible, but it does not load.

  Can I use the disk window to replace or repair the Windows Media Center files without causing other problems?

  Don Winston Hills NSW Australia

  Open your Start menu by pressing the Windows key and type FEATURES in the search box. Select 'Windows turn features on or off ". When the Panel opens, expand the category "Media Features" and place a check in the box "Windows Media Center". You may need to restart after Windows reconfigures itself.

• No Internet after the new hard drive and Windows 7 Clean reinstall

  I have a Dell Studio XPS 9100 I bought in 2011.

  The Seagate Barracuda SATA 1 TB hard drive died, and I replaced it with a Seagate Barracuda 2 TB drive. The re - install Windows 7 went ok, but I couldn't connect to the net.

  A ran the device driver and got errors on the network card and the RAID.

  I went on the site of Dell for the 9100 and installed the drivers for the adapter and the RAID.

  No luck. I always get the error "no card" as well as the error 'no cable not connected.

  I read a lot of posts about this problem and am stuck.

  Someone has an idea how I can fix this once and for all and go on the internet?

  I advise to patch Windows 7 with the WSUS Offline Update:

  http://dellwindowsreinstallationguide.com/WSUS-offline-update/

  Dell System Software:

  http://ftp.Dell.com/FOLDER88677M/8/Dell_System-Software_A03_R282538.exe

  Intel Chipset Device Software:

  https://downloadcenter.intel.com/download/20775/Intel-Chipset-Device-Software-INF-Update-Utility-

  NEC USB 3.0 host driver:

  http://downloads.Dell.com/comm/R266197.exe

  Card reader:

  http://downloads.Dell.com/Input/R266195.exe

  Intel Matrix Storage Manager:

  http://downloads.Dell.com/SATA/Intel_Matrix-Storage-Manager_A01_R230056.exe

  Realtek NIC:

  http://downloads.Dell.com/Network/R266204.exe

  Atheros Wireless Card:

  http://downloads.Dell.com/FOLDER02988710M/1/Network_Driver_9T8XY_WN32_10.0.0.309_A03.exe

  Note make sure that all the drivers for Dell extract and install and extract not only. If they extract only you will need to manually launch the setup.exe in the extracted folder.

• Resync after the new hard drive and battery failure - SOLVED

  I have Vista32 and Hotsync Manager 7.0.2 all works very well with my Treo 680.

  My son tungsten battery went to zero and I put it on the cradle without data now.

  Recently, I replaced my hard drive and have his registered user directory.

  When I sync, it does not recognize the user directory that I copied to My Documents/Palm OS Desktop / (username)

  When I create a new account it just creates the account and I have to manually reload everything.

  How can I easily copy all the old stuff from the tungsten to the computer?

  It was the same exact version of HotSync.

  I don't use Palm Desktop.

  I does not solve the problem but after 2 hours.

  (1) I have synced the tungsten, create a new user with empty data.

  (2) I then faked a dead battery by doing a hard reset on tungsten.

  (3) I then replaced my new data folder empty (under My Documents/Palm OS Desktop /(hotsync name) with my old data from my hard drive to backup folder.

  (4) I then did a hotsync, which now had the name of Hotsync to choose and feeling that it was a Virgin tungsten, all the old data has been reinstalled.

  (5) thanks for the help

  Message is about: Treo 680 (Cingular)

• Start disk Vista Home required after the new HARD drive has been placed!

  Anyone who knows what to do now? I never received the discs with my laptop (legal purchase). I have windows Vista Home on my laptop?
  Someone at - it had the same problem and it sorted? Any boot disk download work?

  Someone at - it a good tip? Thank you.

  Hello

  "All new Toshiba laptops are delivered WITHOUT records of facilities and you need to create this single disc using preinstalled" Toshiba Recovery Disc Creator. This application shortcut is placed on the desktop.

  When you buy new notebook and start using preinstalled system small recovery disk content followed operation recall must be:

  * + Important INFORMATION + *.

  * + your system is equipped with a hard drive recovery system. If you need to repair your computer in the restaurant to the original factory condition, you can do it directly + *.
  * + HDD (press F8 when you start your computer, choose "Repair your computer" and follow the instructions in the menu) or create a media drive bootable recovery to that end. + *.
  * + Toshiba recommends you create recovery disk medium using the "Toshiba Recovery Disc Creator' to ensure that you are able to restore your computer to the original state that is installed at the factory, even if your computer is seriously damaged. + *

  Then please create restore DVD using DVD - R blank emptiness. I assume that you need 2 of them.

• Lightroom reinstalled on the new hard drive. Now the unsaved preferences.

  After a disaster with Win 10, I returned to Win 7 on a new SSD C: drive. I installed CC Lightroom to the new drive. The old preferences file and catalogue remain on the old drive D:. Now I can open my catalog main within the program, but my other catalogs (drive D :) will open if I go into the folder with the catalog and open them from there.) After opening a catalog, photo changes are saved, but none of my preferences are saved. I have to go to the C: drive? Can anyone suggest how to save my preferences? Thank you

  Hi Amora,.

  You can keep catalogs and images on any drive, but yes, it is suggested to install the program on the C:\ drive.

  Suggest make you in Lightroom preferences > Presets > click 'File see the Lightroom Presets' > quit Lightroom > make sure that folder Lightroom has full read and write permissions.

  Then relaunch Lightroom and check if preferences are being recorded.

  Concerning

  Claes

• RE-INSTALL CS5 AFTER THE NEW HARD DRIVE INSTALLATION

  I had to replace my hard drive and now want to re - install my CS5 and Lightroom.

  Can you help me?

  Pete

  You can download the demo version of the software through the page linked below and then use your current serial number to activate it.

  Don't forget to follow the steps described in the Note: very important article Instructions on the pages to download to this site or the download may not work properly.

  CS5: http://prodesigntools.com/all-adobe-cs5-direct-download-links.html

• XP reinstall on the new hard drive

  I can't recreate the MBR from Dell on a Dimension 2400.  The original drive crashed and I I want to install XP on a new drive.

  I tried the solution to recreate the MBR of Dell on www.goodells.net, and I can't get dsrfix to run without fatal errors.  For some reason, pbr3 is never FAT32 or pbr1 mysteriously stops in FAT16.

  There must be a designated Dell method for this procedure, but I have not yet found.  This link explains how to reinstall all software, but I don't see where he recreates partitions or the MBR.

  I frankly don't care the diagnostic partition because the software exists on CD.  I need to be able to start.

  If I use the Super Grub CD, I can boot the CD, and then to Windows, but this is not a good long-term solution.

  Davids.

  
  

• Windows 7 pro says that my activation is not valid after the new hard drive.

  Diagnostic report (1.9.0019.0):
  -----------------------------------------
  Given WGA-->
  Validation status: invalid license
  Validation code: 50

  Cached Validation code: n/a, hr = 0xc004f012
  Windows product key: *-* - M3DJT - 4J3WC-733WD
  The Windows Product Key hash: xo + ajVSpae7/4VoZjS7m6JL0f3A =
  Windows product ID: 00371-OEM-8992671-00524
  Windows product ID type: 2
  Windows license Type: OEM SLP
  The Windows OS version: 6.1.7600.2.00010100.0.0.048
  ID: {F4C77439-E9D9-4A51-8869-6DF8DE7E1A3A} (3)
  Admin: Yes
  TestCab: 0x0
  WGA Version: N/a, hr = 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Product name: Windows 7 Professional
  Architecture: 0 x 00000009
  Build lab: 7600.win7_rtm. 090713 1255
  TTS error:
  Validation of diagnosis:
  Resolution state: n/a

  WgaER data-->
  ThreatID (s): n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002

  WGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  File: No.
  Version: N/a, hr = 0 x 80070002
  WgaTray.exe signed by: n/a, hr = 0 x 80070002
  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  OGAExec.exe signed by: n/a, hr = 0 x 80070002
  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->
  Office status: 109 n/a
  OGA Version: N/a, 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
  Default browser: C:\Program Files (x 86) \Mozilla Firefox\firefox.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->

  Other data-->
  Office details: {F4C77439-E9D9-4A51-8869-6DF8DE7E1A3A}1.9.0019.06.1.7600.2.00010100.0.0.048x 64*-*-*-*-733WD00371-OEM-8992671-005242S-1-5-21-3874045902-1917670552-2236776649Gigabyte Technology Co., Ltd.. Power O.E.M. American Megatrends Inc.. F1 20130408000000.000000 + 00003B83607018400F204090409Central Standard Time(GMT-06:00)03109

  Content Spsys.log: 0 x 80070002

  License data-->
  The software licensing service version: 6.1.7600.16385

  Name: Windows 7 Professional edition
  Description: operating system Windows - Windows (r) 7, channel OEM_SLP
  Activation ID: 50e329f7-a5fa-46b2-85fd-f224e5da7764
  ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
  Extended PID: 00371-00178-926-700524-02-1033-7600.0000-3062015
  Installation ID: 006123886611989160227626608456521816115195059822524626
  Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
  The machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
  Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
  Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
  Partial product key: 733WD
  License status: Notification
  Reason for the notification: 0xC004F057.
  Remaining Windows rearm count: 3
  Trust time: 04/12/2015-18:47:01

  Windows Activation Technologies-->
  HrOffline: n/a
  HrOnline: n/a
  Beyond: n/a
  Event time stamp: n/a
  WAT Activex: registered
  WAT administration service: registered

  --> HWID data
  Current HWID of Hash: MgAAAAEABAABAAEAAAACAAAAAQABAAEAHKIYJ0Au3N/cFVTyEDPUlJI5cCD0AfqjbnU =

  Activation 1.0 data OEM-->
  N/A

  Activation 2.0 data OEM-->
  BIOS valid for OA 2.0: Yes, but no SLIC table
  Windows marker version: N/A
  OEMID and OEMTableID consistent: n/a
  BIOS information:
  ACPI Table name OEMID value OEMTableID value
  ALASKA APIC HAS M I
  FACP ALASKA A M I
  HPET ALASKA A M I
  ALASKA MCFG A M I
  FPDT ALASKA A M I
  ADELINE ALASKA A M I
  SSDT AMD POWERNOW

  Diagnostic report (1.9.0019.0):
  -----------------------------------------
  Given WGA-->
  Validation status: invalid license
  Validation code: 50

  Cached Validation code: n/a, hr = 0xc004f012
  Windows product key: *-* - M3DJT - 4J3WC-733WD
  The Windows Product Key hash: xo + ajVSpae7/4VoZjS7m6JL0f3A =
  Windows product ID: 00371-OEM-8992671-00524
  Windows product ID type: 2
  Windows license Type: OEM SLP
  The Windows OS version: 6.1.7600.2.00010100.0.0.048
  ID: {F4C77439-E9D9-4A51-8869-6DF8DE7E1A3A} (3)
  Admin: Yes
  TestCab: 0x0
  WGA Version: N/a, hr = 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Product name: Windows 7 Professional
  Architecture: 0 x 00000009
  Build lab: 7600.win7_rtm. 090713 1255
  TTS error:
  Validation of diagnosis:
  Resolution state: n/a

  WgaER data-->
  ThreatID (s): n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002

  WGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  File: No.
  Version: N/a, hr = 0 x 80070002
  WgaTray.exe signed by: n/a, hr = 0 x 80070002
  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  OGAExec.exe signed by: n/a, hr = 0 x 80070002
  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->
  Office status: 109 n/a
  OGA Version: N/a, 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
  Default browser: C:\Program Files (x 86) \Mozilla Firefox\firefox.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->

  Other data-->
  Office details: {F4C77439-E9D9-4A51-8869-6DF8DE7E1A3A}1.9.0019.06.1.7600.2.00010100.0.0.048x 64*-*-*-*-733WD00371-OEM-8992671-005242S-1-5-21-3874045902-1917670552-2236776649Gigabyte Technology Co., Ltd.. Power O.E.M. American Megatrends Inc.. F1 20130408000000.000000 + 00003B83607018400F204090409Central Standard Time(GMT-06:00)03109

  Content Spsys.log: 0 x 80070002

  License data-->
  The software licensing service version: 6.1.7600.16385

  Name: Windows 7 Professional edition
  Description: operating system Windows - Windows (r) 7, channel OEM_SLP
  Activation ID: 50e329f7-a5fa-46b2-85fd-f224e5da7764
  ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
  Extended PID: 00371-00178-926-700524-02-1033-7600.0000-3062015
  Installation ID: 006123886611989160227626608456521816115195059822524626
  Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
  The machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
  Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
  Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
  Partial product key: 733WD
  License status: Notification
  Reason for the notification: 0xC004F057.
  Remaining Windows rearm count: 3
  Trust time: 04/12/2015-18:47:01

  Windows Activation Technologies-->
  HrOffline: n/a
  HrOnline: n/a
  Beyond: n/a
  Event time stamp: n/a
  WAT Activex: registered
  WAT administration service: registered

  --> HWID data
  Current HWID of Hash: MgAAAAEABAABAAEAAAACAAAAAQABAAEAHKIYJ0Au3N/cFVTyEDPUlJI5cCD0AfqjbnU =

  Activation 1.0 data OEM-->
  N/A

  Activation 2.0 data OEM-->
  BIOS valid for OA 2.0: Yes, but no SLIC table
  Windows marker version: N/A
  OEMID and OEMTableID consistent: n/a
  BIOS information:
  ACPI Table name OEMID value OEMTableID value
  ALASKA APIC HAS M I
  FACP ALASKA A M I
  HPET ALASKA A M I
  ALASKA MCFG A M I
  FPDT ALASKA A M I
  ADELINE ALASKA A M I
  SSDT AMD POWERNOW

  The type of key and partial media product indicates that you have used a reinstall drive (or other media) that was produced by Dell for a Dell computer.  Your motherboard reports himself can be made by Gigabyte Technology, (which would not arise a Dell system).  The BIOS does not have the required for activation OEM SLIC input.

  You must change the key non - SLP product key, as in a detail (product complete package), selling retail or OEM system builder version of Windows 7 upgrade.  for example the COA/sticky label that came with the computer or the installation media of Windows 7 and then try to activate online or by phone.

  If you used a modded BIOS of third party who attempted to add the string SLIC 2.1 for a motherboard that is not made by a royalty OEM (which Microsoft believes that a form of hacking), then the BIOS mod has not done correctly.