HP 1315 all in one

When I installed a new ink cartridge and the printer automatically ran alignment test. I go through the procedures as instructed, but it runs whenever the alignment, I turn on the printer. Using ink like crazy. Any help would be appreciated.

Hi Valerie Jferber,

You can check this link HP forum, which has a similar problem discussed.

Alignment Page HP PSC1315 prints every time the printer is turned on.

Alternatively, you can contact HP for assistance.

HP customer service

Tags: Windows

Similar Questions

  • 1315 all in one printer

    I have a 1315 all in one printer and since I changed the black cartridge it prints a test page everytime I turn on the printer.  Because I don't use it much, it generally remains offshore.

    I downloaded the updated software, but he always does.  What is the solution?

    Thank you, [email protected]

    Thank you.  It seems to be cleared up now.

    I really appreciate it.

    Ernest Smith

  • HP PSC 1315 all-in-one: error 1632: Temp folder full or inaccessible, when you try to install HP PSC 1315 all in one

    I get the following installation error when you try to install the HP PSC 1315 all in one.

    [code 1632. The Temp folder is on a drive that is full or inaccessible.

    Free space on the drive or verify that you have permission write to the Temp folder.]

    Hi @tasos251,

    I understand that you're seen a message on your temp folder is full, I'd like to help. Please follow the steps below to clean the computer and install the software;

    1. Hold down the Windows Logo key () on the keyboard and the 'R' to open the dialog box run, type %temp%
    2. Delete all files and folders in the temp folder. Choose Skip if all pop ups seem to say all files cannot be deleted
    3. Download the software and choose to save money, save it on the desktop > AIO_CDB_NonNet_Full_Win_WW_140_408 - 4.exe
    4. After that the downloaded software and extracted, open the temp folder once again, use the instructions in step 1.
    5. Locate and open the folder starting with 7z (example: 7zS2356)
    6. Open the folder Util
    7. The CCC folder
    8. If you have a computer HP run the L3uninstall.exe. If you have annon HP computer run the L4uninstall.exe
    9. Once the uninstall is complete, reboot the computer
    10. Follow these steps to reset the registry settings and options for Windows Installer.

  • PSC 1315 all-in-one: paper jam

    My wife was going to print something from our computer and the printer took several leaves inside. It jammed so she shot just leaves in the front now, our computer said there is a paper jam and will not print we. I went through all the steps of the Glade, restarting, etc. that I've read in hp and others who shared their problems. It copies and analyzes very well. The computer tells me that there is a jam. Could have broke us something by pulling the paper to the front?

    Thank you

    Oldfud

    Hi @oldfud

    Welcome to the Forums of HP's Support. I understand your computer continues to tell you that there is a paper jam. I would like to help.

    It is possible that something has been damaged. Although it could be a "hiccup" with the software on the computer. You can try running the HP Print and Scan Doctor. This will check the software. If the problem persists, try this document a view of the "Paper jam" error HP PSC 1315, 1315v, 1315xi, s and 1318 1315 all-in - One Printer Series.

    If you have any questions, or if this does not resolve the problem, let me know.
    If it solves your problem, please click acceptable Solution. This will allow other people with the same problem the solution easily. If you want to say thank you, feel free to click on the laurels.

  • 1315 all in one printer: my 1315 all in one printer shows "paper jam".

    My 1315 all in one printer shows "paper jam" even if I can copy directly, and it has good connection with the computer, there is no jam. I also changed the ink cartridges to see if that helps - it is not.

    Thank you for your help. I tried everything, but it didn't work. In the end I tried to change the port to USB port on the computer and we are back in business. The printer was the problem, it is the port. I hope this helps someone.

  • power cord for hp psc 1315 all-in-one

    where can I find a power cord for my printer. I have a hp psc 1315 all-in-one

    Search you the Web?

    https://search.Yahoo.com/search?EI=UTF-8&FR=ytff1-GL-Gen1&p=HP%20psc%201315%20Power%20cord&type=

  • Is it possible to set up in windows 7 for my printer HP psc 1315 all in one...?

    .. .or is not possible, and it is best to think about to buy a new printer!

    I was wasting far too much time trying to set up many "good drivers" for this device and will never work ok

    My question is simple: "there is a device that works well with HP psc 1315 all-in-one Windows seven?

    Thanks in advance ;-)

    Peter

    IF this is your printer/scanner - http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4062&lc=en&cc=us&dlc=en&sw_lang=&product=374568#N223 then there are drivers W7 32 and 64 bit available for this purpose.

    Everything on the PC concerned with your HP printer uninstall, restart the PC, then download and use the appropriate driver (W7 - 32 or 64 bit depending upon need) and see what happens then.

    Whatever it is, as its apparently supported, you're probably better asking HP if you did not already.

  • HP psc 1315 all-in-one driver download problem?

    Hello..

    I tried for 2 days to download the driver HP 1315 all in one for windows 7 (64-bit)... downloading begins... a full 99%... and he tells me there's one second left... and then it stops the download... in other words... the download never reaches 100%! .. and I can't use it... I was wondering if it is possible to get another link?

    Where are you located?  I just downloaded the file 300 + MB from the link here.  If this fails, you can try this link (ditto, but http:// instead of ftp: / /).

  • 1315 all in one analysis not and can not install new driver

    I have a MIni Mac osx 10.4.11 running. My 1315 all in one worked fine. Recently, I had to clean my hard drive and since then. The printer will only print and copy. When I push the scan button on the machine it does nothing.  I can't find the guests to scan on my computer. I tried to down load and upgrade the driver software, but I get a message, the software failed to install.

    When I click on n the Manager device the message is "there no device HP connected to this computer. Yet I can print documents from my computer

    Any suggestions, I bought this printer to Mexico a few years ago and have never had any problem in downloading the driver before.

    Thanks Colimanut

    Hello

    There are many choices of downloads on the hp customer care website.  You try to install the package software for HP PSC 1310 Series - Mac OS X 10.3 and 10.4 (Universal) ?  I found it here: http://h10025.www1.hp.com/ewfrf/wc/softwareList?os=219&lc=en&dlc=en&cc=us&lang=en&product=374568

    You may need to run Uninstall HP (located in the Hewlett-Packard folder in your Applications folder) before you run the downloaded installer.

    And, just to confirm, you have the trendy 1315 directly on your mini (or a usb hub connected to your mini)?

  • HP 1315 all in one printer, windows 7, can not find the solution Center.

    Mr President

    It was working fine, 1315, printer all-in-one. lately every print, I had off and ON the machine. Today, to uninstalled and then downloaded from the additional driver section all the reqd. I installed. but the main exe from the file ' AIO_CDB_NonNet_Full_Win_WW_130_141 '.

    do not settle. ...

    " Solution Center is not installed and to get hp support, I downloaded hp printer scan cylindre diagnosis and when I run... another message comes" hp photosmart essential scan.msi isn't available... what shud I do?

    I don't know what to do next?

    kindly help.

    Hello pajitmenon,

    Seems that the installation of the software is corrupted somehow. I recommend "rubbing" the software current and 'nine '; To do this, follow the instructions below:

    1. click the Start button and type %temp% enforcement

    2. Locate and open the folder starting with 7z (example: 7zS2356)

    3 open the Util folder

    4 open the CCC folder

    5. run the L4uninstall.bat

    6. once the uninstall is complete, restart the computer

    7 run the Accessories\ System Tools Disk Cleanup

    8. download and install the latest version of Adobe flash player

    http://get.Adobe.com/flashplayer/

    9 download (again) the drivers and full software functionality from the link below

    http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=Al-75052-1 & CC = US & DLC = in & LC = on & os = 4062 & Product = 374568 & sw_lang =

    10. run the download to reinstall the printer

  • HP psc 1315 all-in-one will not scan

    My all-in-one HP 1315 machine is more scanning documents. It copies and prints without any problem, but I can't scan. After I have put a document on the glass and press the "Scan" button, the "On" flashes several times and then the machine makes a short noise and then nothing. Can anyone help to troubleshoot the problem please?

    Jamieson, goodnews. Myallinoneprinternowscansagain.Ithinktheproblemwasthatthesoftwarehadbecomecorrupted.SoIuninstalleditandreinstalleditandthatseemstohavedonethetrick.Thanksforyourhelp.SJAEFF

  • hp psc 1315 all-in-one printer has a memory/hard disk?

    I want to have a printer all-in-one hp psc 1315. is there a hard drive than the personal information?

    Hello

    With a few exceptions, most of the printers have not memory to hold the print jobs (which are not cleared by simply turning off the printer).  The only thing that can be stored in some printers (with fax capacity) is telephone numbers in the fax log.  I don't think that the PSC 1315 has a fax, but if you really want, you can do a hard reset I think that you can unplug the printer from its power source and by holding the power and Cancel buttons down.  You may see a flashing of the lights. That should do it!

  • PSC 1315 all-in-One with Windows 7 (64), SP1, prints too high on the page.

    My printer prints too high on the page. Regardless of the printer or document settings, the first line prints at the top of the page. This problem is not present with Notepad, but appears with WordPad and Open Office Writer. How can I pay for this investment?

    Response to Shane_R:

    I spoke too soon. I think that I was not successfully download these drivers because I received messages that the original driver has not been installed. (Don't know why it worked once.)

    In any case, I found an old link to the HP site for my all-in-one model that provided a full hybrid software and driver download makeover. I installed it correctly and so far everything works better than before. Thanks for me toward the pilots initially.

    It comes to seventh year of my printer and second course of youth. Now maybe he'll go another seven.

  • PSC 1315 all-in-one can be used as a fax machine?

    I thought I had faxed before 1315, ha ve in hook new computer and now it seems that I can't send fax, it is even possible to use while a psc 1315 as a fax?

    Well, no, it isn't. You can see the specs here PSC 1315 specifications. If you had faxed to her, you would have a phone line connected on it.  Maybe you tried an e - fax service and the printer to scan the document.

  • HP PSC 1315 all-in-One use scanner without ink cartridges

    Hello

    Is it possible to use HP PSC 1315 scanner without ink cartridges? A light ink control is brinking and it won't scan.

    Sorry, you will not be able to scan without changing the cartridge.

    The printer is not working with the lights flashing and an error state.

    So, you will need to have LITTLE ink cartridges to scan.

  • I have an ink cartridge error with my HP PSC 1315 all in one.

    Although the inklevel should suffice only the HP 57 watch color cartridge so, where as the HP 56 b & w only. I discovered that the date on both cartridges have already been exceeded. Read on the internet that in this case the printer will be automatically blocked. Replace both cartridges by news will not change the situation. So in fact, the printer is ready for the junkshop and buy a new printer, the only solution. Is it TRUE...! ??

    Hello

    If expired cartridges are in the printer, the printer will not be blocked but error message\light will appear to replace the cartridge.

    If the expired cartridges are replaced with new ones, the problem should be solved.

Maybe you are looking for