Reinstall Windows 7 error: «there is no disk selected for installation (4294967295)»

Similar Questions

• Windows system error: there is an IP address conflict with another system with the network. How do I remove this error message?

  I just installed a new internet provider and all of my connections are working fine, but I constantly get this "Windows system error: there is an IP address conflict with another system with the network." I have my electrician of the internet modem connected to my office. I have also two wireless devices connected to the appearance of the Modem wireless. I constantly get this error message mentioned above, and I want to get rid of it.

  This means that all that he says.  Your Windows system has an address that already exists on your local network.  Turn your system off and use a working system to locate this address and to which unit he belongs.  In most LANs, the router's DHCP server.  You may be able to ask the router which addresses are used and see what device uses this address, but I suspect not.

  Duplicate addresses can occur when two systems received the same address manually, or when we got an address in the DHCP of the router range. It is unclear when this happened because he is not in control of the address and puts the address duplicate to a second system.  You need to track down, ensuring that all addresses manually asigned are out of the DHCP range, that you book the address of the router, if you want the device to use this address, or configure all devices to request the address of the router using DHCP.

• I'm having a problem reinstalling Windows XP. After formatting the disk and create partitions, it will not complete the installation.

  Problem reinstalling Windows XP

  I'm having a problem reinstalling Windows XP.  After formatting the disk and create partitions, it will not complete the installation.  He goes back and reinstall Windows again.  I go through the installation of 39 minutes, the computer restarts to complete and it loops back and start the installation again. Why it does this and what I can do to move beyond this?

  Go into the BIOS and make sure that you your hard drive is not set to off, and that is the first priority boot CD and your second HD.

  Don't push when it restarts anything just to let him do what he does and report back if anything I'm sorry I have no idea.

• I need 2 reinstall windows vista, but have had is no longer my installation cd, cani always reinstall? __

  I need 2 reinstall windows vista, but have had is no longer my installation cd, cani always reinstall?

  How to get Vista recovery Media or the Vista recovery Partition on your computer back to factory settings.

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Ask them if you can also make recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/default.aspx/KB/326246

  'How to replace Microsoft software or hardware, order service packs and upgrades, and replace product manuals'

  See you soon.

  Mick Murphy - Microsoft partner

• There is no driver selected for the item or a set of device information

  There is no driver selected for the item or a set of device information

  Error message when I try to update the mouse driver or video driver. Windows 7

  Hello

  Thanks for posting your question in the Microsoft Community.

  From your problem description, I understand that you can not update the driver. Please let me know if this isn't the problem that you are experiencing.

  I understand the inconvenience caused to you. I will help you solve the problem.

  Before troubleshooting, I have little information about the issue.

  1. When exactly do you get this error?
  2. Did you of recent changes to the computer before this problem?

  Try installing the driver in compatibility mode. Here are the steps how to install drivers in compatibility mode.

  (a) place the driver on the OfficeSetup file.

  (b) make a right click the driver installation file and select Properties or compatibility tab select the appropriate options in entries to the displayed image.

  (c) click apply, and then click OK.

  (d) right click on the file and select run as administrator to install.

  I also recommend that you contact the manufacturer of the hardware device, and you learn about the support of future drivers for Windows 7.

  If the problem persists, post your reply with results and questions above. We are happy to help you further in the advanced troubleshooting steps!

  It will be useful.

• I just got an upgrade DVD Amazon's LR5.  There is no option .pkg for installation on a MacBook Pro.  Only setup32.exe, and setup32.64.  What should I do?

  I just got an upgrade DVD Amazon's LR5.  There is no option .pkg for installation on a MacBook Pro.  Only setup32.exe, and setup32.64.  What should I do?

  You can try to download the Mac version and using the serial number of the drive.  LR serial numbers are normally good for both platforms.

  Lightroom - all versions

  Windows

  http://www.Adobe.com/support/downloads/product.jsp?product=113&platform=Windows

  Mac

  http://www.Adobe.com/support/downloads/product.jsp?product=113&platform=Macintosh

• Impossible to reinstall Windows XP error: BSOD STOP: 0X0000007E (0XC0000005, 0XF78DA208, OXF78D9F08)

  Original title: BSOD

  tried to reinstall windows xp bsod STOP: 0X0000007E, (0XC0000005, 0XF78DA208, OXF78D9F08 * pci.sys_address more numbers to several numbers and a date stamp.)

  Hello

  1. How are you trying to install?

  2 do you use a full version Windows Setup disc or the recovery disk?

  3. at what stage of installation you get the error message?

  I suggest you try the steps from the link below and check if it helps.

  http://support.Microsoft.com/kb/330182

  Additional information:

  How to fix a computer that does not start: http://windows.microsoft.com/en-US/windows-xp/help/setup/how-to-fix-computer-that-will-not-start

  Hope this information is useful.

• Windows could not format a partition on disk 0. The error occurred when preparing the partition selected for installation. Error code: 0 x 80070057

  So I just finished my first build. All this POST-ed fine, but I can't get 8.1 Microsoft 64-bit OEM installed on my SSD.

  At first I could start a custom installation and it went through fine until the first reboot. This is where it says "disc error". I tried again hoping it would go but noticed a 350 MB "System reserved" Partition with the rest of my space unallocated in my 1st attempt to install.
  I googled this problem and was told to remove the reserve system, so Windows could create its own partition, or something of that kind.
  Installation works well until you restart again, where this time it says press any key to boot from the cd drive or something of the sort so I don't hope that Windows 8 would be to continue the installation. However, he wanted to just restart the entire system again!
  I try once more in the hope that it would work, I remove the additional partitions created and repeat and this time I can't even begin installation due to the message in the title of this post.
  Since I was:
  -Make sure SSD has been selected for AHCI (it was already on it)
  -Reconnected given SSD + cables power as well as the CD player on shutdown and reboot
  -Run Diskpart to repair the boot with these commands:
  -diskpart
  -disk list
  -select disk 0
  -clean
  -output
  Same error code came again after attempting to reinstall. So I tried a few other commands:
  -diskpart
  -disk list
  -select disk 0
  -clean all the
  at this point, he said: DiskPart has encountered an error: the request could not be performed because of an i/o device error.
  Someone please help!

  Try to create the new partition and do. for example, to verify the steps for Windows 7-

  http://support.Microsoft.com/kb/2476568/en-us

  Likewise, create a partition first.

• Error: "there was a disk error when you write to the file C\:Program files (x 86) \microsoft games\dungeon siege\resources\objects.dsres" during the installation of Dungeon Siege.

  When I try to install it it comes up with an error about 16% in the installation, saying that there is a disk error when you write to the file C\:Program files (x 86) \microsoft games\dungeon siege\resources\objects.dsres

  Any ideas?

  Hi MouseToe,

  What version of Dungeon Siege you trying to install?

  The cause of this problem could be the corrupted resource (.dsres) file or disk error. Here are some things you can do to solve the problem.

  Method 1: Run the disk check.

   

  Check the integrity of your hard disk for lost clusters and errors.

  To do this, follow the steps in this article: check a drive for errors

  Method 2: Defragment the hard disk.

  This improves the performance of your hard drive.

  Reference: improve performance by defragmenting your hard drive

  Method 3: Run the game as administrator.

  Here's how:

  (a) right click on the game configuration file.

  (b) choose 'Run as administrator'.

  Method 4: Try to install the game in a different folder or to a different drive

   

  Try to install the game in a different folder. If the computer has another hard disk, try to install the game on the other hard drive.

  Follow these steps.

  a. Insert the game disc in the drive.

  Note: Do not click on Quick Installation during installation.

  b. follow the setting menus until you see the change button.

  c. click change.

  d. in the path box, delete the existing path, and then type the following text:

  drive: \Program Files\Microsoftgame name Games\

  In this example,drive is the letter of the hard disk drive and the name of the game is the name of the game you are trying to install.

  e. click OK when finished.

  f. follow the instructions that appear on the screen to install the game.

  This should be it.

  For more information, please visit:

  http://support.Microsoft.com/dungeonsiegeiifaq

  For additional assistance, please post your concerns at the forum below.

  http://www.Microsoft.com/games/en-us/community/pages/forums.aspx

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Starting problems, get the error "there is no disk in the drive. Please insert a disk into drive \Device\Harddisk1\DR1.

  1st problem: yesterday I started getting a popp window with the text following formulation - "there is no disk in the drive. Please insert a disk into drive \Device\Harddisk1\DR1' I have no idea what this introduced him or how stop it.  Any suggestions?

  2nd problem: whenever I restart my computer or shut it down and then power up the white bar that moves from left to right only moving to halfway through and then stops. I then have to hold the power button in until the computer turns off again and then rehit the power button. When it starts to power back up the white bar is always in the Middle, but then begins to finally complete the passage to the far right of the box. This problem started when I loaded the software for my printer Canon MX870 new that I bought and installed in October 2010 and has been done since then. I removed and reloaded the software of the printer on three different occasions but the problem persists.

  Hi frankb911,

  Please see the thread with a similar problem and fix possible:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-performance/there-is-no-disk-in-the-drive-please-insert-a-disk/b9a130b2-4261-4385-a51f-28005f209a1d

  I hope this helps!

• I want to move to solid state HD need to reinstall Windows 8. Is a recovery disk availalable?

  I want to spend my Aspire E1-571 to Solid State hard, so I need to reinstall Windows 8.

  Is an availalable of recovery for download disc image or a physical relocation drive is available at a nominal cost?

  Yes. If you go on store.acer.com, you can go purchace one if you are in the United States or the Canada. If you are outside this area, then you will need to contact technical support in your region for an order.

• IF I GO TO REINSTALL WINDOWS 7 MY WIN-7 ORIGINAL DISK THEN I HAVE TO REGISTER AGAIN?

  I INSTALLED WINDOWS7 IN MY PC ASSEMBLY IN THE YEAR 2012, BUT NOW MY PC IS VERY SLOW, SO I THINK TO GO FOR BACK WINDOWS OR A COMPUTER TO THE ORIGINAL SETTING.

  WHAT OPTION AVAILABLE IN THE METHOD OF RECOVERY IN ADVANCE IF I DO THAT, I HAVE TO REGISTER AGAIN FOR MICROSOFT?

  PLEASE HELP ME.

  D DAS

  DURGAPUR (INDIA), WEST BENGAL

  Hi Das,

  Thanks for posting your query in Microsoft Community Forum!

  According to the description, it seems that you want to reinstall Windows 7 and would like to know if you have to activate again.

  I will certainly help you with this issue.

  Yes, you will need to reactivate Windows 7 If you reinstall.

  For more information, see the links.

  Activate Windows 7: frequently asked questions

  http://Windows.Microsoft.com/en-in/Windows7/activating-Windows-7-frequently-asked-questions

  Activate Windows 7 on this computer

  http://Windows.Microsoft.com/en-in/Windows7/activate-Windows-7-on-this-computer

  If you have any questions on Windows, feel free to let us know. We will be happy to help you.

• When I try to install iTunes, I get this error: "there is a problem with this installation package. a program required for this installation could not be executed.

  He said: "there is a problem with this installation package. a program required for this installation could not be completed, contact your provider of batch

  original title: itunes is not installed.

  Hello

  Did you change your computer?

  Method 1:

  I suggest you to see the links and check.

  Problem installing iTunes or QuickTime for Windows

  http://support.Apple.com/kb/HT1926

  See also:

  Solve problems with programs that cannot be installed or uninstalled http://support.microsoft.com/mats/Program_Install_and_Uninstall

  How to solve problems when you install or uninstall programs on a Windows computer

  http://support.Microsoft.com/kb/2438651

  I also suggest you to contact the Apple support and check.

  http://www.Apple.com/support/

• Windows Update, error 80072efd y at - it repair for vista sp2.

  I have a travel mate 5730 and when I tried to update I had Windows Update error 80072efd and have not found a repair for vista sp2

  See the below Microsoft article and try the steps mentioned and check if it works

  http://windowshelp.Microsoft.com/Windows/en-us/help/93b6ab71-8B21-4B50-B40E-abb80eba29271033.mspx>

  UTC/GMT is 15:23 Thursday, September 15, 2011

• Error code 646 stops my PC for installation important updates__Cannot find this error code 646.

  I had 7 important updates fail constantly up-to-date. A 646 error code keeps coming up. So, I followed the suggestions of microsoft without success and without response to this error 646 code is? My pc starts to develop some problems due to these updates are not installed.
  I'm not very good with computers, so I dare not do anything more with the understanding of the code... someone can help me please

  See if this helps you-

  Option: File of Windows Update agent wups2.dll is incorrectly registered and the registry associated with the Wups2.dll file files are missing.

  Method 1: Save the Windows Update files

  1. Click Start and type notepad in the box start the search.
  2. click on Notepad in the list programs.
  3. copy the following commands, and then paste them into the opened Notepad window:
  REGSVR32 WUPS2. DLL/S
  REGSVR32 STINKS. DLL/S
  REGSVR32 WUAUENG. DLL/S
  REGSVR32 WUAPI. DLL/S
  REGSVR32 WUCLTUX. DLL/S
  REGSVR32 WUWEBV. DLL/S
  REGSVR32 JSCRIPT. DLL/S
  REGSVR32 MSXML3. DLL/S
  4. in Notepad, on the file menu, click Save as.
  5. in the file type list, click all files.
  6. in the file name box, type register.bat.
  7. save the Register.bat file to your desktop.
  8 right-click the Register.bat file, and then click Run as administrator. If you are prompted for an administrator password or a confirmation, type the password or click on continue.
  9. try to reinstall updates.

  http://support.Microsoft.com/kb/958053
  See: method 1: save the Windows Update files

  http://support.Microsoft.com/kb/326253
  Method 5: Registry Windows Update engine files

  http://support.Microsoft.com/kb/971058
  How to reset the Windows Update components?

  Method 2: Download and install Windows Update agent

  Windows Update Agent

  How to get the latest version of the Windows Update Agent to help manage updates on a computer
  http://support.Microsoft.com/kb/949104

  Information for network administrators about how to obtain the latest Windows Update Agent
  http://support.Microsoft.com/kb/946928

  Click Start, click run, click Browse, navigate to the file you saved and click Open.

  Add the switch /wuforce at the end of the command run and then click OK. For example, the command run might look like this: "C:\WindowsUpdateAgent30-x86.exe" /wuforce

  Click run.

  Follow the steps to complete the wizard.

  Important

  To reinstall Windows Update Agent - download the relevant file from one of the links provided above and save it to a drive where Vista is not loaded because the file cannot be launched directly from the root directory of the system.

  Click Start, run, type: "D:\WindowsUpdateAgent30-x86.exe /wuforce" (without the quotes) and press ENTER to install the Windows Update engine.

  Note: There is a space between "D:\WindowsUpdateAgent30-x86.exe" and "/ wuforce.

  D: is the drive where Windows is not installed (IE a flash drive or a 2nd hard drive etc.)

  TaurArian [MVP] 2005-2010 - Update Services