Reinstalling windows 8 after hard drive failure

Let's say I bought a laptop with Windows 8 preinstalled (I'm considering the purchase Lenovo Yoga 13)

and then one of the following things occur:
-my hard drive dies
-I want to repartition the hard disk and format it
-I want to buy a new hard drive and replace the existing one
The question: what is the safe way to reinstall the OEM of Windows 8, which comes with the laptop on a clean
(no restore partition) hard drive?
Here, the assumption is that I start with a laptop from work 'by default'.

Some information:
I read some topics on these forums and my current understanding is that the activation key for OEM Windows 8 is stored somewhere in the BIOS/UEFI and can be removed by windows installed. I'm fine with that. Where can I get the installation media in this case? In the Microsoft store I was informed (by a technician) that I would essentially need to purchase an OEM Windows 8. Certainly, I hope this gentleman, I was talking to does not know his business. I think know that by buying the windows laptop I also buy the license for this particular Windows OEM installed on it (related to hardware and all).

Hello

After looking around a bit, I can't find no details on a recovery device at all either. Only something about a picture "Recovery."

The problem is that if your hard drive is a replacement or reformatted, it seems to me that the image would be useless because the software required to load it would be gone.

Unless the 'Image' would contain the necessary software to load, and it's doubtful...

Thus,.

I would suggest picking up Acronis image, preferably of the Plus Pack version, or something similar...

I tried a number of programs, including the most free, image and Acronis seems to be the better (and faster).

There are a few programs that can detect that they have been refilled from an image and require reinstallation... That almost never seems to happen with Acronis images for some reason any.

You can often find it for sale cheap and sometimes free after rebate, if you want to wait...

It compresses the Image, she creates and takes much less space as a result...

I have a 128 GB SSD, responsible for programs that absorb about 60 GB... Acronis compresses the image to 20 GB.

It reloads the Image on ANY HDD\SSD that is large enough... 60GB for example.

You can Image the entire drive or individual partitions... In your case, I recommend both as soon as you get the computer. Just to cover all bases.

The only withdrawal to it is that you will need an external HARD drive or a Flash capacity...

I make the Images of new OS every time I do a great time of change or put to date. In case of problem, 15 minutes to make a new image is nothing compared to having to start again.

I currently have about 10 images to win 8 since I installed it taking about 180 GB...

My understanding is that the installation of Acronis CD is also bootable... which is when you want to use it anyway. I can't confirm that at this time because my bootable CD was burned by the installed version of Acronis and I can't find the original disc to test it.

Tags: Windows

Similar Questions

  • HP G60-235: upgrading to Windows 7 after hard drive failure

    First of all I would like to say that I hope that it is in the right part of the Forum, if it not is not please let me know.

    I have a G60-235 HP running Vista.

    My hard drive has failed and that I had tested and it is unusable. I replaced the hard drive with an SSD and don't have an operating system.

    I can't get into the Bios and there may be some info that is needed, f, so please let me know and I'll post it.

    Is - this here anyway to check to see if my HP can handle Windows 7? I downloaded the Windows 7 advisory.

    I also looked for the evaluation version of Windows 7. I could not find. The link I followed by searching showed me the evaluation for 8.1 version.

    I would not buy the full version and find out it does not work, but I also prefer to go back to Vista is possible.

    Any help would be appreciated.

    Thank you

    ethulwulfe

    Your model must run Windows 7 well. There are even Win 7 drivers posted at HP. There are 3 different models of G60 235 (CA, DX, WM) listed, but this is an example:

    http://support.HP.com/us-en/drivers/selfservice/HP-G60-200-notebook-PC-series/3837658/model/3894827#Z7_3054ICK0KGTE30AQO5O3KA30R1

  • Reinstalling operating system after hard drive failure. new hard drive is smaller

    Is it possible that I can use the smaller hard disk in my slimline model possible s3500f. The original drive has failed and needs to be replaced. I have that I bought a few years ago, it's 300 GB of the disk sata hard donkey used. The reader who couldn't amounted to 500. I don't just have money to buy another hard drive. Nor have the money to buy a vista 64 installation disc. I made the recovery discs when I bought the machine like a good girl should, but now I find out that they will not work to install the OS on the new drive, because it is smaller.

    Is there a way to get around this? My financial situation like so many others has changed radically since I bought the computer and try to get money$ $ for a new hard drive or Setup disk would take time and my son needs the computer for school, which begins this week.

    Thank you in advance to anyone who knows a solution

    Sshhameless1

    Salvation, which will not work because they will not be able to send a file of 3 GB email.

    Your choices as I see it is to make a 32-bit installation media, or have your friend make the 64-bit support and you deliver the completed flash drive, after they test.

    You can start just up and then cancel the installation - just to make sure it will work.

  • Reinstall Windows 8 after HARD drive crash

    I've got Sleekbook 6-1250er HP ENVY with Win8-Ru.

    Unfortunatly HDD death and recovery partition is no longer accessible.

    Is there a way I can get ISO image with Win8-Ru (or Win8.1 - Ru) to my laptop (with all drivers and HP tools) so I can load them on the flash drive and install?

    I found a topic with Win8-en. But I'm not shure if my OEM key will install the version Eng of Windows and if I could install Ru-interface.

    Hi Lehych,

    Welcome to the Forums of HP Support!

    I'm sorry to hear that you had to replace your disk on your Sleekbook 6-1250er HP ENVY. I'll try my best to help you with this.

    Here is a document for HP recovery disks or USB HP recovery disc that explains how to get records from recovery or media to replace the partitions, including the recovery partition.

    I hope that this helps, please let me know how it goes.

    Good luck and have a great day!

  • reinstalling after hard drive failure

    I recently had a hard drive failure, my installation of acrobat 9 pro extended was on the e: / drive

    I replaced the e: / drive and tried to reinstall acrobat

    I uninstalled the software acrobat via the programs applet in the control panel

    When I tried to reinstall acrobat, I got an error message saying that the software was already installed

    the Setup program won't let me move forward beyond this point

    Windows 7 pro 64-bit

    Acrobat 9 pro extended

    Acrobat 9 pro extended 64 bit addon

    Hello russleeman,

    Please try to run the cleanup tool "Download Adobe Reader and Acrobat tool - Adobe Labs" to remove all traces of Acrobat on your computer.

    Then install Acrobat 9 again and see if that helps.

    Kind regards

    Ana Maria

  • How can I recover 12 PE after hard drive failure?

    February 25, 2014, I bought Adobe Premiere elements 12. The "my-products-services" page that it lists as well as all the other Adobe products that I bought for my Windows 7 64-bit desktop PC.

    I managed to reinstall CS6 Design and Web Premium after a catastrophic hard drive failure last month; However, am currently blocked in even trying to locate where on the Adobe Web site it might be permissible for me to re - install. For unknown reasons, my license is ss12, but my order is not listed under account - orders.html #myorderhistory. CS6 is shown on this page and was how I could restore CS6.

    Does anyone know what I should do next?

    Warmly yours.

    Kelly

    Find the link to download the current trial of v12 and then activate with your serial number

  • Reinstall Vista after hard drive failure

    My hard drive crashed and another was installed by a tech where I took the laptop Dell Inspiron 1525.  The tech installed Vista Home premium on my computer, but it wasn't my reinstallation DVD, I had Dell when I buy the system.  I need to reinstall Vista using my DVD.  Questions: 1 - do reinstall it without losing my existing data?  How do I know if the reinstallation DVD contains Service Pack 2?  The version of the technology used included SP2.  I guess it would be a problem if the DVD of resettlement was not SP2.  Thank you

    It depends on how long you had your Dell notebook about what SP you have and what Dell which you are provided.
    For any questions about the version of the recovery of the Dells software, contact Dell:

    http://support.Dell.com/support/topics/global.aspx/support/DellCare/contact_us

    Playback information Dell at the link below on how to use their recovery DVDs.

    Each manufacturer has their own way to do it.

    http://supportapj.Dell.com/support/topics/global.aspx/support/DSN/en/document?journalid=67E9C215C4BABD6CE040AE0AB5E14F05&docid=339949

    Above is Dell to reinstall Vista from the DVD on your computer.

    Back up your data: read link above.

    See you soon. Mick Murphy - Microsoft partner

  • Get Windows 7 upgrade after HARD drive failure

    My HARD drive has failed.  My pc came with Vista with an upgrade to 7.  The recovery disc are Vista.  How can we get 7.  It is impossible to contact HP by email.  My product ID has rubbed off.  Otherwise, I would install just 7.  Any suggestioins?

    Hello

    I think that HP has sent you a DVD with a key for this free upgrade a few years back. You must know where you keep now, otherwise you have to communicate with Misrosoft because it's a Microsoft product, and Microsoft's offer through agreements with other providers of material.

    Kind regards.

  • reinstalling golive after hard drive failure

    I've been using GoLive for several years and it meets my needs, which is only to make small updates to a Web site.

    My hard drive failed and I replaced the computer.  Of course, cannot disable GoLive on the dead drive.

    How can I install GoLive on my new computer with her yet 'activated' on the computer of death?

    Move to GoLive

  • Reinstall Windows 7 on hard drive again with only the Win 7 Upgrade disc?

    So I have an e9180t which, like clockwork, freezes after about an hour or two after the boot.  I thought it might be the curse of bad mothers, with what they came, but I hope that it is something else so test everything I can.  I noticed that it does not freeze upwards when it is started in safe mode with network.  The hard drive failed the test SMART so I wonder if it's time to replace it as if that has anything to do with the crash.   I can move the cursor, but no applications will be open and eventually everything becomes insensitive causing be tohit the power button to restart.   I already stopped unnecessary startup programs and it will still freeze in unsafe mode.

    The PC came with Vista and I think it's what's on backup hard disk partition.  I have the disk Win 7 Upgrade from HP.  My questons are-

    1. If I buy a new HD 7 upgrade disc will be enough to install the full version of Win 7?

    2. anything else I should do when I install the new HD and more to reactivate Windows?

    Thank you.

    Hi Mike,.

    Have you created a HP recovery disk to reinstall the factory image when replacing the HARD drive?

    It sounds like you have maybe a problem creating the recovery discs now.

    A Smart HARD drive test failure points to a HDD failure. The symptoms you are experiencing are likely caused by this fact. You can also have a card mother or any other hardware problem.

    You have the key to drive and Win 7 Upgrade product.

    I'm pretty sure that the upgrade to Windows 7 to be launched from Win Vista. The upgrade of Windows 7 is a full installation of Windows, so this isn't the problem. But he can't run the installation unless you start the upgrade in Win Vista. Normally, an upgrade to Windows 7 is launched within the current operating system, Win 7 valid existence of an eligible OS Setup and then request a restart to complete the installation of upgrade.

    You can replace the HARD drive and try to install Win 7 itself. If this fails and you do not have the Vista recovery discs, you can buy an HP recovery disc set here. There are three different versions. Select one that corresponds to the operating system that is installed at the factory.

    You may have another problem to replace the HDD with a Format HDD advanced most recent. Please see thisHP Supportdocument for more information.

    If you cannot install the upgrade Windows 7 itself or Win Vista because of the issue of the Advanced Format HARD drive, you may need to purchase a copy of Windows 7 OEM.

    Jaco

    I'm not an employee of ch *.

    "" "" Please give a "Bravo, Thumbs Up" If the notice is relevant or "accept as Solution" to help other users of the forum having a similar problem.

  • BSOD on install of Windows 7 after hard drive crash

    I have a HP Dv7 with Intel i7 and 8 GB memory. About 3 years.

    Recently, I lost my hard drive to a physical failure. I bought a 120 GB SSD as the principal and a 1 TB drive 7200 RPM as the secondary to be replaced. I ordered the HP restore kit to reinstall Windows 7, but each installation stops at "loading drivers" step and gives me a BSOD. I tried to remove the SSD drive and using only the hard drive, but the same results. Also tried to do a clean install of Windows 7 with an ISO image to a bootable USB key. The same problem. I also tried swapping the primary/secondary locations for readers.

    Nothing I have tried seems to work. I'm desperate for a solution! Why would I get a BSOD on a reinstallation of the software factory?

    I am trying install Windows 7 without SP1 to see if that works, but have no chance. What else can I try? What I have to install Windows 8 to work with the new hard drive or SSD? »

    I tried to restore 4 times (3 hours + per attempt). I tried the clean install of Windows 7 SP1 at least 10 times, each of them do not reach the exact spot. Windows won't INSTALL, so that steps can be taken?

    As I posted earlier, I had problems with installing Windows 7 on my laptop HP Pavilion Dv7 after replacing a hard drive defective. I ordered the kit of training materials ($60) and the operating system of restoration kit (essentially Windows 7 and drivers) on a 4 disc set. I paid the extra money for all accelerated for me.

    After you have installed a 120 GB SSD and the new 1 TB drive 7200 RPM, I tried to install the operating system using the DVD restore I ordered. Each installation took about 4 hours and each of the 3 times (i.e. 12 hours!) installation has failed at the end of the installation process. Then I downloaded a clean version of Windows 7 ISO and burned a bootable USB an attempt installs another 15, which also failed at the end of the installation process.

    In desperation, I contacted HP support and was informed that I had to pay for technical support. I must say that I was really disappointed by HP and HP «each incident» support I spent $59 and 3 hours talk with some idiots in the new Delhli, who accompanied me through a few tests of BIOS of base no matter what 3-year-old could have understood, I sent them a picture of the BSOD and error code, and they arrived at their 'solution' to send me my laptop to HP for them to install a new hard drive and reinstall the operating system for the pittance of $200 and 7 to 9 days!

    I refused their generous offer to relieve myself of the burden of $ 200 in my wallet and took the laptop to Fry when I bought it. After 15 minutes of discussion about my question, the tech told me that I needed to install the Intel drivers during the installation of Windows 7. He popped a USB key containing the Intel drivers, I've needed, continued with the installation of Windows 7, and I was back at home with a working machine within the hour. It cost me $35. A BARGAIN, given that HP, the company that BUILT my laptop was completely distraught about this problem and the only solution was to deprive me of my laptop for 9 days and during this time, charge me $200.

    So to all who read this, please pay NOT for the HP "per incident" support. They are slightly educated idiots who know no more about the HP product than your typical 3 yr old child. For example, they suggested that the HP laptop in my possession was "very sensitive" and I wouldn't be able to put 'any hard disk that was not exactly to the same specification as that was in it from the factory'.  Idiots.

    I you need to re - install Windows 7 on your laptop, visit the Intel website and download "floppy" (i.e. not the executable versions which self install) versions of their drivers for your laptop, load on a USB stick and when begins the installation of Windows 7 where it asks if you want to load the drivers, select the drivers on your USB key and installation will be smooth.

    Again, how is it possible that HP and their support forums are not aware of the problem or the solution? Seriously. This is probably the last HP I buy. Just exhausting and annoying to deal with this.

    Craig

    PS - My HP Pavillion DV7 is smoking quickly with the new solid-state drive and updated 7200 RPM secondary drive. * beep * thing boots like 20 seconds and Photoshop load almost INSTANTLY. Incredible.

  • How to install Win 8 on Satellite C850 after HARD drive failure?

    I have a PC repair business and a customer gave me a portable Satellite C850-1 kN which took a catastrophic hard disk failure (just clicking from the road).

    I replaced the hard drive and tried to boot from a DVD 8 Windows, changing the order of startup in the bios, however, it still gives an error message "no boot device."

    I see no way to turn off boot UEFI, it appears grayed out in the configuration of the bios.

    How can I reinstall Windows on this laptop?

    First, you must know that the (CSM/UEFI mode) parameter must be changed if you want to install the system supported UEFI not (Win 7 and higher).
    Win 8 and 8.1 Win are UEFI capable systems and you should be able to use the option to UEFI mode.

    What about the secure boot option?
    Have you found and have you tried to disable this option?

  • Pavilion Mini 110: Mini 110 suddenly invite you for the BIOS password after hard drive failure

    After mini disk failure hard full sat for a long time. So, I'm going to replace hard drive today and it is stuck on the screen of the BIOS password! After that 3 wrong attempts it gives an error CNU9283Y90

    I tried to unplug the CMOS battery, wait awhile, and then tie... no go!

    Can anyone help!

    TIFF

    TIFF.

    Enter e9lo7ufio1

    Use this code to go into the BIOS.

    Disable all passwords that are enabled.

    If demand for CURRENT password using this code.

    Request NEW password just press ENTER.

    If asked to hit just to CHECK password to enter.

    Save and exit.

    REO

  • Windows lost after hard disk failure and Downgrade from Windows 7 key

    I have a client with an Asus laptop that allowed a downgrade from Windows 8 for Windows 7.

    After some time, the hard drive crashed, including the recovery partition.

    I got a replacement hard drive recovery disks and OS and the driver, but do not have a Windows 7 key. I installed Windows 7, but I am now in the grace period of 30 days without activation. How can I retrieve the key used on the same machine?

    Thank you very much

    -Joe Sharit

    If you lowered licensed Windows 8 Pro pre-installed, borrow a product key Windows 7 Professional, one on a COA sticker that is attached to a computer or a friend or relative members boxed license, activation of phone use.

    Explain to the Appeals Officer that you are running downgrade rights.

    How to activate Windows 7 manually (activate by phone)
     
    1) click Start and in the search for box type: slui.exe 4
     
    (2) press the ENTER"" key.
     
    (3) select your "country" in the list.
     
    (4) choose the option "activate phone".
     
    (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
     
    (6) explain your problem clearly to the support person.
     
    http://support.Microsoft.com/kb/950929/en-us

  • Do I have to disable the Windows key of I intend to reinstall Windows on another hard drive?

    I have a TB HDD which was once my main OS (Windows 7) until the motherboard and the PSU broke. I bought new equipment and could not get my old hard drive as Windows 7 above to start. I would like to get a quick flash of the blue screen of death, and the system was in the same boot loop. My brother-in-law brother let me borrow an another disk drive hard 80gig empty I was able to install the OS on and reconnect my old drive to recover all my pictures, music, videos and documents. Now I want to format my old 1 TB drive and reinstall my OS on that drive. I have to turn off the key? Is there a limit to how many times you can use your key? I could have sworn that Windows XP has been like that?

    It would be similar to Apple's iTunes software, where you can disable the service before you can reinstall.

    If it is a complete retail Windows 7 license and this is the same computer, you can just reinstall and reactivate automatically. If the Activation of the Internet does not work, use the phone activation:

    How to activate Windows 7 manually (activate by phone)
     
    1) click Start and in the search for box type: slui.exe 4
     
    (2) press the ENTER"" key.
     
    (3) select your "country" in the list.
     
    (4) choose the option "activate phone".
     
    (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
     
    (6) explain your problem clearly to the support person.
     
    http://support.Microsoft.com/kb/950929/en-us

Maybe you are looking for

  • Covered wagon with an average of analog voltages DAQmx

    I searched through screws, I can't seem to find something that will automatically average numbers of boxcar fed into it. I am trying to create a feature of my software that will allow the dynamic configuration of the car covered with an average of so

  • I want to improve my hp pavilion 15 n003sq

    OK, so I want to improve my hp pavilion n003sq 15I have 2 questions: 1. can I put my laptop up to 16 GB of ram? I have only 2 slots of 8 GB each. And I wonder if my laptop supports ram 2x8gb.It's the ram that I have in mind:-HP DDR3L 1x8GB SO-DIMM, 1

  • My HP Pavilion starts in Preset Mode and the sign flashes every second

    When I start the computer the next sign appears: Mode Info - 48.4 KHz / 60. OHz - 1024 x 768 - PRE-SELECTION MODE. The sign is flashing every second and doesn't go away.  I'm unable to log in because the sign covered the opening of session space prog

  • SL 500 live

    I have a SL-500, that does not illuminate... To open the case, impossible to find a screwdriver that fits the screws. It is a special screw / home? Thank you

  • SP1 problem

    Tried to install Windows7 SP1 several times. Auto update subsequently said that it has been installed successfully.  Next automatic updater says that it is not installed and so I tried to install it again. I checked the system properties and it is no