RELAY CONTROL WITH THE HELP OF USB-6008

Similar Questions

• Install OSX 10.11.4 I do cleaning but R command will not work. With the help of USB keyboard so not wifi issues to to worry. Help?

  Install OSX 10.11.4 I do cleaning but R command will not work. With the help of USB keyboard so not wifi issues to to worry. Help?

  Would you like to share why you must do a clean install?

  You can try the recovery of the internet (which will work if your older model has been updated to enable of): hold command + Option + R until you see a progress bar (take a while). It will connect you to the Apple servers. When you see the utility window, choose disk utility to erase your disk and when you're done, choose to reinstall OS X.

  Computers that can be upgraded to use OS X Internet Recovery - Apple Support

  PS: Correction: I think not yours can be updated; in this case, you will need the original installation disks to wipe the drive and reinstall.

• With the help of USB-6009 with LabView 8.0

  I try to use a USB-6009 with LabView 8.0 box.  I DAQmx 8.8 (that came with the unit) installed and verified that the 6009 works correctly through MAX I also read on this site that the 6009 is compatible with LabView 7 or more.  However, I am unable to get LabView to recognize the device.  Using LabView, to use a DAQ hardware I have to select "Input" in the palette 'Functions'  But there is no range "Input".  Actually I can't find the DAQ Assistant Express VI anywhere.

  Do I need to use a different version of the DAQmx?  If so, which and where can I find it?

  Thank you.

  LabVIEW 8.0 is not supported with DAQmx 8.8. I think that the last version with support for 8.0 is DAQmx 8.6.1. You can uninstall 8.8 and install 8.6.1. You should really consider upgrading your version of LabVIEW. NOR has decided to limit support for 7.1 8.0 just now. The latest version of DAQmx manages to only 8.2.x and higher.

• Return the column in the dynamic table based on indicators of control with the help of EL

  10.1.3 JDEV
  ADFBC
  The ADF faces
  
  I'm looking for EL that exposes if suspicion of display of the attribute has the value "Hide".
  
  Inside a < af:table > tag I dynamically generate columns from the View object:
  
  < af:forEach elements = "#{bindings." MyView.attributeDefs}.
  var = 'def' >
  < af:column headerText = "#{bindings." MyView.labels [def.name]} ".
  sortable = "true" sortProperty = "#{def.name} '"
  rendering = "true" >
  < af:outputText value = "#{row [def.name]}" / >
  < / af:column >
  < / af:forEach >
  
  I want to hide a column if the display for the corresponding attribute flag is set to 'Hide '.
  
  I was not able to find the appropriate EL syntax to expose this property.
  
  Does anyone know a quick/easy EL expression to expose the display flag?
  
  Thanks in advance.

  Looks like it will work only in 11g.

  Here's what you can do in 10.1.3.4 I tested as working...

  Add a bean support like this helper class (I registered with the managed bean name 'Helper' in the scope.

  package extendsproject.view;
  import java.util.HashMap;
  import java.util.Map;
  import javax.faces.context.FacesContext;
  import oracle.adf.model.BindingContext;
  import oracle.adf.model.binding.DCBindingContainer;
  import oracle.jbo.AttributeDef;
  public class BackingBean {
    Map m = new HashMap() {
        public Object get(Object key) {
            if (key instanceof AttributeDef) {
                AttributeDef ad = (AttributeDef)key;
                DCBindingContainer bc = (DCBindingContainer)FacesContext.getCurrentInstance().getExternalContext().getRequestMap().get(BindingContext.RESERVED_BINDINGS);
                if (bc != null) {
                    return !"Hide".equals(ad.getUIHelper().getDisplayHint(bc.getLocaleContext()));
                }
            }
            return null;
        }
    };
    public Map getDisplayed() {
        return m;
    }
  }
  

  I have the reference in my dynamic page in the property 'made' column ike this:

• Change in the ID of arbitration with the help of usb-8473

  Hello everyone,

  IAM using USB 8473 Receive messages on CAN Bus. For what Iam using CAN Receive.vi and Net Interface Logging.vi. IAM receiving messages correctly, but I have a problem in arbitration received IDS. If the current arbitration ID is 0 x 14FF0001 (Extended) then Iam receive as 0 x 34FF0001, and if the arbitration ID is 0 x CFF0127 then Iam receive as 0 x 2CFF0127. However, the channel in the frame information is correct. Can someone help me how to fix this problem. The first 2digits are 14 is dispalying 34 or if the first digit is C, it takes 2 c.

  Thank you

  Zo.

  Thanks for the reply Matt. I could find the solution.

  Zo.

• With the help of USB Powershare on XPS13 (early 2015)

  How powershare works, it is always enabled, only what laptop sleeps, another time? I have to do something for him allow explicitly (since it doesn't seem to work with Windows 8.1 as delivered)?

  And finally, all of this documented somewhere, and, if so, where?

  Hi David,

  I thought about it. After allowing it in the bios, you will have to activate the windows power plan to do. Here's what you do,

  1. make a right-click the battery icon

  2. go in power options

  3. click on "change plan settings" for plan what ever you want.

  4. click on "change the power settings advanced".

  5 scroll / click on "USB settings".

  6. When you get to "USB selective suspend setting" turn off for the two dough and plugged in, this will allow current USB when the laptop is turned off or in sleep.

  I would like to know if you have any other questions.

  Mohammad

• Is it possible to delete a plot with the help of the mouse select the chart control?

  For example, when I use the plot to draw thousands of lines on the chart control, I want to delete some of them, but there are thousands of generated plotHandle.

  How can I get the plotHandle of the specific line on the chart control with the help of the mouse to select the option?

  If I save the information from the lines, such as the plotHandle and the coordinates on a table or list, etc, I compare information lines for the plotHandle of the specific line.
  Is it all a user-friendly way to remove a track selection on the chart control?

  I can't give you a reasonable way to solve this problem, since as you have already noted plot do not snappable plots.

  A possible warkaround would be to replace the plot of individual instructions with a PlotXY matching with 2 bays 2 points each, which correspond to the x 1, x 2, y1, y2 parameters to plot. PlotXY plots are snappable, so you can enable this procedure select the plot and remove it.

• Help? With the help of file system Ext3 on key USB on Linux RT target

  We have been affected by problems with the SD cards and USB drives formatted in FAT32 on some devices, according to Linus RT of long-term monitoring (mainly the cRIO-9035). It seems that readers are vulnerable to fluctuations in current and unexpected reboots (which are inevitable on these sites). Write aborted operations make the damaged discs, thus sabotaging logging after reboot.

  We have identified two solutions; implement both gives the best redundancy:

  (1) installation of UPS (uninterrupted power supply for emergency supplies/batteries) - done

  (2) using the file system apparently more robust 'ext3', which is available on the target RT Linux (FAT32, ext2 and ext3) - don't have not so far:

  ->, I was not able to properly format a USB stick for ext3. I use the MiniTools Partition Manager and don't get any errors when create and format partitions. But they appear as 'read only' when it is inserted into the chassis of the RT. All attempts to access it, other than to observe the empty folder sdxx in ' / media "is returning errors.

  Someone had a bit of luck with the help of ext3 disks formatted as data drives on the objectives of the RT Linux? It is worthwhile to solve my problems or should I use FAT32 and the observed risk?

  I do not consider this but a temporary solution:

  I ran into issues when you use MiniTools Partition Wizard to partition and format my thumb on Win10 records. An unidentified change makes the inaccessible disks and freeze the browsing of file on the PC when I try to delete the partition. It was quite annoying!

  I decided to try another partition tool and went for the EaseUs Partition Master (free version for the moment). I formatted successfully one of the troublesome discs with it (to add some uncertainty to the solution, I used another brand sp * banking, new PC to do). The reader now mounted in read-write and allows the startup application create the I want to store files in folders.

  I'm very curious to know the difference between the tools of both partitions and their formatting...

• With the help of modulated signal pulse width (square wave) to control when a signal is enabled or disable

  With the help of modulated signal pulse width (square wave) to control when a signal is enabled or disable

  Hello all

  I am using a modulated signal to labview created pulse width (square wave) to control when a signal is activated or not.

  Here is my logic and a concrete example:
  (1) the wave source signal is continuous
  (2) use a PWM (square wave) created in labview to control when the signal is enabled or disabled
  (3) if the PWM (amplitude) signal is superior to 0 play signal PWM is not greater than 0 do not play signal.

  I use actually this to the sequence step / pulse several distinct magnetic coils using my audio card (which has several channels of audio output), I have a signal in labview played constantly.  As to compare it to the PWM (square wave) which controls whether or not the signal is played on each separate channel.  That way I can control which coil is on and offshore and in what order they are activated.

  I couldn't find an edge detection for a square wave created in labview, so I tried the limits, but it doesn't seem to work unless I change the phase manually and it only goes 1-1.  I'm just trying to compare the PWM (edges of the square wave) already created by labview / play a signal if the pulse is greater than 0 and it shuts off the signal, if she is less than 0.

  Should I do this another way

  TIA

  A waveform contains an array of values. You must check every value and respond accordingly:

  

• With the help of AMPA on non - WS Data Controls

  Hello community MAF .

  I'm developing an Application of MAF that consumes the REST API of WebCenter portal (which is based on the model of HATEOAS).

  I want to make powerful from scratch, including the following:

  -Offline mode (using the SQLite).

  -Persistence, of setting cache and synchronization using AMPA.

  Looks like it's not easier to apply directly on the REST API of WCP AMPA.

  The REST API of WCP is the result of a call of two steps:

  1) authenticate using BASIC authentication against http://Host/repos/api/resourceIndex for the utoken

  (2) use utoken as the URL parameter for the next call of REST for the specific service.

  I know that the Bus Service could be a possibility on the creation of a more simple REST on the WCP REST API, but is not an option right now because that is not easy to map.

  My questions are:

  (1) can we use AMPA on data controls in Java that will call internally to (DB in case of offline mode, REST by program in the case of online mode).

  (2) can define us manually in the persistenceMapping.xml?

  (3) is there anything else more easy to use wizards with HATEOAS base based Services?

  Thanks in advance

  Kind regards.

  Daniel,

  Why is it not service bus an option? You say 'not easy to map', but do the mapping in the MAF makes it not easier, it? the REST API of pressurization is not very easy to mobile, so this transformation to a more usable by using bus service API cost as a good idea for me. See also this article from the A-team.

  Answers to your questions:

  (1) Yes, this is the added value of nucleus of AMPA. You get a service generated the DTC Assistant classes, then you turn this class in a bean data control and use this data control bean for the construction of your user interface. The service class will access local DB and the service REMAINS remote. By default, AMPA will directly show the current data of the local DB, and then in the background call the REST service (online) and refresh the UI, once the REST call has been processed. But this behavior is very configurable and can be changed as you wish.

  (2) Yes, of course, you can manually create data objects, classes of service and persistence mappings, but the wizard is generally much faster.

  (3) HATEOAS logical not for the dynamics of UI where the next action is determined by a link returned in the payload. It is a different model from the static of the UI we build in general with MAF. What is your problem with the help of the wizard of the AMPA?

  Steven Davelaar,

  Oracle Mobile & Cloud A-team.

• LR fills the entire screen. How can I reduce this so I can control the size or reduce it with the help of the control-M?

  LR fills the entire screen. How can I reduce this so I can control the size or reduce it with the help of the control-M?

  Hi DP,.

  Are full-screen mode in Lightroom, you can it exist by pressing SHIFT + F.

  Kind regards

  Mohit

• With the help of old gear series noon on El Capitan

  I have a Vox Tonelab SE effects audio Board (around 2004), there the old serial midi on the back ports. I hung with the help of a USB MIDI interface cable. While the USB Midi interface to the show in Audio / Midi set upward and also in the profile system for USB port it does not detect the Vox Tonelab so no communication lunch.

  There is a POWERPC application called ToneLabSE SoundEditor which I downloaded and installed in the hope he would install a driver but I guess that this obviously doesn't work on INTEL in any case. Using Wine I can run the PC version, but still no communication via midi.

  Someone at - it ideas, would like to get this Panel communicating effects via MIDI.

  Thank you

  

  

  

  Solved! Using the WINE app I've run the version of the PC of ToneLab SE editor application. So pretty unintuitively by changing the serial midi to USB, SERIAL interface cables that went to the and out on the Tonelab SE. Now of the Se ToneLab editor I can write banks of programs to hardware Tonelab, but unable to empty the banks since the material Tonelab to software. My main desire was to use Expression pedals on the Tonelab as Midi Ableton controllers and some of the switches to the control of the Looper stomp. Now I can do it all. Hooray!

• How to create the ISO image of windows 8 with the help of boot, efi, sources, and support files

  Hello
  I followed folders in my USB key:

  Boot
  EFI
  Sources
  Support,

  and the following files:

  Setup
  Bootmgr.EFI
  Bootmgr

  How can I create an ISO image of windows 8 with the help of these files and folders. I even installed ADK, but I couldn't keep up with it.
  I would be very grateful if someone could help me out here.

  Secondly, I would also like to know how to create a system image of WINDOWS 8, where the hard drive breaks down.

  Concerning
  MAK

  If you have the upgrade key, go here

  http://Windows.Microsoft.com/en-us/Windows-8/create-reset-refresh-media

  You can go for the use of win8 / win7 / vista to match highlights you want - and download the win8 installation and run the installation with your key to download you need to install windows from that.  Will allow you to have an iso bootable.

  Make a picture of the control panel system / Windows 7 file recovery / system Image.  I certainly wouldn't put it on dvd.  It will be too.   Find an old preference portable hard drive and buy a $ 20 usb box, get an external hard drive.

• Have no control with the mouse on my Satallite P300-123

  I have a problem with my mouse on the laptop. When I use the mouse, the mouse is every time left right up down.
  So I have no good control with the mouse.

  Can someone help me with this probem?

  (Sorry for my English)

  Hello

  Do you use the touch pad or external mouse?
  If you use an external mouse disable touchpad by using the FN + F9 key combination, especially when you use the keyboard.

• not able to install the driver mx NIDAQ (for the use of USB-6008) in my laptop, NIDAQ902f0? any solution...

  I am not able to install driver of mx NIDAQ (for the use of USB-6008) in my laptop,... well NIDAQ902f0 want to give any suggestion...

  Following message comes when I run the Setup... (installation program downloaded from the website OR..)

  Runtime error:

  This application has requested to terminate in an unusual way.

  Please contact the application support is more information.

  Title of the dialog box is "Microsoft Visual C++ runtime library"

  Is the same when NIDAQmx 7.5 is tried to install from the CD that came with the USB-6008.

  Double post