Released from memory recovery - how it works?

Similar Questions

• How can I get WIndows8 TouchSmart to boot from the recovery disc

  How can I get WIndows8 TouchSmart to boot from the recovery disc? With the recovery in the drive disk when I do a reboot or stop and start it does not read anything from the DVD player. My computer is a HP TouchSmart 23-D160QD.

  @AirForce9731,

  You may need to change the boot order to boot from the DVD drive first.  The steps to do this are in the document below.

  http://support.HP.com/us-en/document/c00364979

  These are recovery disks made by the recovery discs sent by HP?  They will not work in a different system (you will receive an error message), but you are able to get the boot floppies in a different system?  They should be able to start up to a point where the error message will be displayed.

• XPS 12 / Win 8: how to boot from the recovery partition / reinstall Windows?

  Messed up things on a newly purchased 12 XPS in Windows 8, and I want to boot from the recovery partition and reinstall windows.

  Support online pages point by pressing F8 during startup, but this does not at all.

  How can I access the recovery partition?

  To access to the menu of, , press F2.

  To enter the boot options menu, press F12.

  Because the XPS 12 boots so fast, it is better to repeatedly press F2 or F12 after restarting the machine. During the startup process, texts for options should appear at the bottom right of the screen. If you enter Windows, you will need to restart again and press F2 or F12 until it works. However, I don't think there is an option in the BIOS to restore the computer to its factory condition. The previous post by DELL-VIKRAM M describes how to properly restore the machine to its factory state.

• How to reset AirPort Extreme 10.11.6 OS? How to work with this pinhole? I'm trying to get rid of this flashing yellow light, which began after I installed a new modem from Comcast.

  How to reset AirPort Extreme 10.11.6 OS? How to work with this pinhole? I'm trying to get rid of this flashing yellow light, which began after I installed a new modem from Comcast.

  How to work with this pinhole?

  Usually a paperclip or toothpick or ball pen.

  Stick it in the hole and reset for about 10 seconds until the front led flashes quickly.

  How to reset AirPort Extreme 10.11.6 OS?

  The software method... Unlike the above material method... is to open airport utility and select restore default settings.

  

  Both methods take you to the same place.

  You can also read the manual...

  Reset to a base station AirPort FAQ - Apple Support

• Re: How to install Windows from a recovery on a new hard disk media?

  Immediately after a Windows Update, my computer will not re-start. It says disk error.

  I could not start it from the recovery media and F8 would not work. I bought and installed a new hard drive. Now, when I put in the recovery media to install Windows on the new drive, it gives an error message.

  What this may be? Would I be able to install Windows from the recovery media?
  It is Windows 7 and laptop Satellite A500, 64 bit.

  Hello

  In General, you can install Recovery on each compatible HARD drive image so you should not be a problem in this regard.

  Please tell us what happens when you start installation of recovery. What error message?

  New HARD drive is recognized in the BIOS. Before you begin installation of recovery BIOS default value.

• How Siri works with a hotspot wifi phone from ATT without data?

  How Siri works with a hotspot wifi phone from ATT without data? I have the hotspot & it recognizes my iPhone5c, but Siri cannot find a connection when I use it. My phone service is now but only phone at & t imessage. No data, unpaid for the text. It works fine on my home WiFi & works but not the hotspot.

  Siri requires an Internet connection

  It will not work without one

• Lost on my computer recovery CD. I have xp sticker number on the case from my pc how to do a repalcement?

  Lost on my computer recovery CD. I have xp sticker number on the case from my pc how to do a repalcement?

  Hello

  Contact the computer manufacturer and ask them to send XP Recovery discs to reinstall the dos operating system as it was when you bought it

  they do it for a nominal cost of $

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  http://support.Microsoft.com/kb/326246

• How can I get my recovery disks to work? I just got back my laptop to factory settings.

  I have a HP Pavilion dv5 laptop MODEL # 2045 X, (Windows 7 home Premium) Serial # CNU0202M8K

  Due to some problems, he was advised to return our computer to factory settings. I did as instructed by my computer, my computer has been provided with a set of 5 recovery disks made and who is given to us in a global market by the seller of Best Buy Geek Squad. After "wiping the computer" and return to the factory settings as I was not able to load the recovery discs when inserted the computer simply wonder how I want open, only option was to read the files, I looked at the and he didn't file labeled 'start' or 'auto start' or 'autorun' so do not know how to install these recovery disks they have programs and important files on them. Please help me!

  Hello:

  You cannot run Windows Recovery discs.

  I guess that the disks are labeled 1-5?

  You insert disk 1 into the DVD player. Restart the PC.

  At the beginning of the HP welcome screen, press the F9 key to start the start time menu. Select the DVD - ROM drive, and then press the Enter key.

  Watch then a line will appear on your screen to hit any key to boot from the DVD. Press a key.

  The PC should now boot from the recovery disc and you simply follow the instructions on the screen.

  Before using these disks, make sure that you have backed up the files you want to keep, like everything you have on the hard drive now will be lost once the recovery process starts.

  The only thing I do not understand in your message, it's that you say that you have restored your computer to its factory settings.

  The recovery disks will just do the same thing. He won't do anything more or less on the recovery disks that is on there now.

  Paul

• My activation key for windows 7 (bought from my college) does not work. How can I contact someone who can help?

  My activation key for windows 7 (bought from my college) does not work.  How can I contact someone who can help?

  -Mike

  Hello djplexus

  First, you will need to understand how to set up the dual boot. This will allow you to be able to choose between XP and 7 at startup.
  http://TechNet.Microsoft.com/en-us/edge/video/ff710733
  With regard to the creation of an image of Windows XP Backup there is no Windows XP software that will do it for you. You will need to look to third-party vendors for support with this issue. Thank you.

• I get an error message that my memory is low, but when I go to delete files from my recovery disc it will not allow me too.

  Original title: recovery Partition

  Stays of complete recovery partition may not free up any space. I get an error message that my memory is low, but when I go to delete files from my recovery disc it will not allow me too. There are 6 total folders on my drive:

  Dell, Program files users tools and windows sources.

  The Windows folder and the program are the most important concerts of 6-7 piece. But when I try to delete them or move only to the recycling it is bin-error right and says Destination folder access denied and I need permission for this action... Any idea would be deeply appreciated. Thank you

  I apolgize if I look tense. That's the way I read your phrase... > if I try yo run an app download anything I get this error...

  I suggest that you contact the manufacturer of your computer. Ask to speak to a technician and explain to that person of the situation.

  I'm afraid that I have no idea why your recovery partition gives you message "not enough memory" If you have never touched him.

  Maybe you'd wait for people with better computer skills to help you.

  Thank you.

• Windows vista Home premium recovery question - how to get the source for windows vista home edition premium as the recovery does not work since the recovery partition

  How to get the source to windows vista Home premium recovery is not from the recovery partition and gives me an error message

  Hello

  Contact the computer manufacturer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

  they do it for a nominal cost of $

  or borrow a vista microsoft dvd; not a HP, Acer recovery disk etc

  Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  http://support.Microsoft.com/kb/326246

• How to uninstall Windows 7 from the recovery disk?

  By mistake, I installed Windows 7 on the recovery disk. I have only windows 7 installed on my Dell Inspiron. However, it is now a multi-boot, as Windows 7 is stored on the operating system and the recovery drive. How delete/uninstall Windows 7 from the recovery drive (more free space on it is exhausted). I already tried to 'Format' and 'Remove the Volume' in the disk management page, but the options are grayed out and I can't access it.

  It's probably that you managed to install on the Dell recovery disk victory because it would be too small.

  Open the recovery partition in Explorer to view the files.

  Use msconfig to remove incorrect boot entry

• How to find what processes are running on my computer and use it from memory?

  * Original title: find running processes

  How to find what processes are running on my computer and use it from memory?

  You can press Ctrl-Shift-Escape to see which processes are underway and those who is using memory (and how much they use).  Although the memory usage is not as important as how they use lots of CPU, which is what can make your computer slow if there are too many programs use the CPU at the same time.  For memory, even if she says that he uses a lot, an inactive program ' pages on "memory to the hard disk and it frees room for other programs to use, is not as important as the CPU generally (unless you are very very low on memory).

• I had order for package of photography for annual, monthly plan paid... initial amount .and already deducted from my bank account but I havnt got emails or links to the license... keys pls let me know how it works?

  I had order for package of photography for annual, monthly plan paid... initial amount .and already deducted from my bank account but I havnt got emails or links to the license... keys pls let me know how it works?

  Hi John,.

  There is no serial number associated with Adobe CC.

  Please refer to the help documents below to download the application Adobe CC:

  Creative cloud to desktop

  Download, install, update or uninstall applications

  Kind regards

  Sheena

• How to extract information from memory

  How to get the allocated memory, used memory, and the memory that is reserved by a virtual machine?  The following does not work

  $Collection = @)
  $v = get - vm | % {
  $out = "" | Select VMName, RAM, MemReservation, MemExpandableReservation
  $out. VMName = $v.Name.ToUpper)
  $out. RAM = $v.MemoryMB
  $out. MemReservation = $v.ResourcePool.MemReservationMB
  $out. MemExpandableReservation = $v.ResourcePool.MemExpandableReservation
  $Collection += $out
  }
  $Collection

  Hello, @E4F-

  It seems that the problem lies in the second line of your code:

  $v = get-vm | % {
  

  The way that you try to use $v later, it seems that you wanted:

  get-vm | % {
       $v = $_
  

  Thus, it would be something like:

  ## initialize array
  $arrInfoItems = @()
  Get-VM | % {
       $vm = $_
       $objOut = "" | select VMName, RAM, MemReservation, MemExpandableReservation
       $objOut.VMName = $vm.Name.ToUpper()
       $objOut.RAM = $vm.MemoryMB
       $objOut.MemReservation = $vm.ResourcePool.MemReservationMB
       $objOut.MemExpandableReservation = $vm.ResourcePool.MemExpandableReservation
       $arrInfoItems += $objOut
  }
  ## output the info
  $arrInfoItems
  

  Outside the update of some variable names, the only change I made was the passage mentioned above.  See how it works for you.

  Enjoy