Relocation of vCenter VM to a different cluster with separate storage

Similar Questions

• Add Server ESXi in Vcenter 5.5 cluster with a different number of socket

  I have 5 nodes compute node IBM Flex System X 240 8737T7M with 2 CPU Socket in a VMS Cluster with identical hardware and now I need to add 1 more IBM System Flex X 240 node calculate 8737T7M with 1 CPU Socket in the same cluster.

  Here are other points: -.

  VCA Mode is disabled in this cluster.

  5 existing and new are the same model of CPU and memory is of the same capacity.

  Only the difference is 5 knots with 2 sockets and another node is 1. Please notice is recommended and he face any technical problem.

  VMware ESXi 5.0 and Vcenter is 5.5

  
  

  Hello

  VCA mode is not required when the generations of CPU on the server is the same.

  Adding your host in the cluster will work then.

  He advised not to add servers to a cluster with mixed material config. A possible problem might be the Admission HA control for example settings. If you configure a number of hosts reserved for failover, you may encounter problems with your hosts do not match each other. Here, you define the ability to failover in percentage.

  Tim

• Migrate from vCenter Server 5.1 again cluster

  I have my server vCenter Server (v5.1) VM on a former cluster of servers ESXi 4.1/5.0. I only have vSwitches on each of these hosts. I now have a new 5.1 ESXi hosts managed by this same vCenter Server cluster. However, this new cluster has a with completely different dvSwitch VLAN is configured. I have already created several new VM in this new cluster with the new VLAN / port groups.

  I would spend my vCenter Server the old the new cluster and I can't understand how to do this since I can't access my dvSwitch when adding my vCenter Server VM to a new host.

  Any ideas?

  Thank you

  BM

  Is not possible. For a migration live to work, you need the source networks and applications available in both environments.

  I just create a new server vCenter in the 5.1 environment and migrate new hosts to the new vCenter server.

• Problem migrating Vcenter server from the old cluster to the new cluster?

  Hey guys,.

  Just came across this situation, and I don't know what to do. I pass my vcenter server older glomerulus with hosts of esx4.0, to a more recent cluster with hosts of esxi4.1. The material of host machines are different generations, and vmotion don't migrate vcenter because of the cpu sets between cluster mismatch. If I could turn off the virtual machine and migrate it would work, but since it's my vcenter Server I can't do.

  Should I restore it on the new cluster?

  Thanks for the suggestions/tips

  Kevin

  Connect directly to the ESX host using your client vsphere, vCenter vm shutdown, vCenter remove inventory, then go to the new host, browse the data store on the vCenter vm is, and add the vCenter Server inventory.

  This assumes that the same storage is presented to both hosts.  If this isn't the case, you will need to use winscp or something similar to copy the files from the virtual machine.

  -KjB

• Add esx cluster with different cpu

  Hi all

  I have a cluster with 5 esx 4.0 u1-208167, which installed on IBM x 3550 M2 ((2 x Intel® Xeon™ processeur E5520) .)

  I want to add a server to server cluster .the is IMB x 3550 m3 (2 x Intel® Xeon™ processor E5620 4 c)

  do I have to make a chenges on Esx servers / vm / vcenter when I add the new esx for my datacerter and to the cluster so I can do Vmotion / storage migrate this server in the cluater (I have the appropriate license and plug)?

  Thanks for the help

  is there another way to activate the CEV on my existing cluster and does not create a new?

  You can try to create a new cluster and select CVS it and move all your hosts to this cluster

  should I turn off my vm all?

  You will need to put the hosts in maintenance mode. So what you can do is put the host 1 in maintenance mode, virtual machines will move to host 2. Now move the new active EVC cluster host 1 and continue to do this until all of your hosts are in the cluster. You can try vMotion your VM 2 host to host 1 which is now in the new cluster, but it all depends on what your processor will hide VCA is activated... And if you cannot vMotion, virtual machine in a VCA not to an active evc cluster cluster, then Yes, you will have to turn off and restart your virtual machines in the new cluster

  I also have SRM ad site.do I need to activate the CEV on the cluster, I have here (a different Vcenter)

  No u don't.

  Follow me @ Cloud - Buddy.com

• Parameters of different Cluster OR XNET (Hex 0xBFF6309A)

  I've updated OR XNET on my system and the goal of rt and now I get this error:

  Pible reason (s):

  NOR-XNET: (Hex 0xBFF6309A) interface has already been opened with different cluster settings as those specified for the current session. Solution: Make sure the settings of the cluster of agreement for the interface, or use a different interface.

  MPCC,

  Can you click the CAN Port in the system definition and make sure that the Cluster settings have been kept?  I saw this option to reset before.

  

• Initialize the cluster with data types different (lots of data)

  Hello

  I have data, which are composed of different data types. First of all, I have initialize cluster with these types of data and then "print" to light (photo). In case of photo data carries 8 characters than ja 4 floats. It was easy to initialize, but here's the question: How can I do this even if I have data that look like this (interpreter):

  floating point number

  name char [32]

  Short value [16]

  What I create loooong cluster which have a fleet of 32 characters, 16 short films? Or I can create these 'paintings' in a different way?

  THX once again

  -Aa-

  I suggest using the table-cluster and configuration of the cluster size to match the size of your berries, then package these groups together.  In terms of storage of LabVIEW, there is no difference between a group of

  floating point number

  Name1 tank

  name2 tank

  ...

  short value1

  short value2

  ...

  and a bunch of

  floating point number

  -> cluster shipped from

  Name1 tank

  name2 tank

  ...

  -> cluster shipped from

  short value1

  short value2

  So you can use the cluster table to get the right sizes rather than individually create all these values in a single giant cluster.

• Can I create different consistency nodes in the same cluster with defferent?

  Can I create consistency different nodes in the same cluster with defferent cache - config.xml file?
  A cache can be distributed in these nodes of deffirent?

  Yes. You can create different consistency nodes in the same cluster with cache files - config.xml defferent as long as you use the same file tangosol - coherence.xml and the same file tangosol-coherence - override.xml. But you can't store the data in the cache in the various nodes (created with different cache-config file). In other words, a node only to create their own Hide modes that are launched with the same cache file - config.Xml.

  See the following demo:
  I start a cache using the cache config examples-cache file server - server.xml. Then I start a console cache storage-disabled people (client cache) by using the config file coherence-cache cache - config.Xml. Two of them using the same file tangosol - coherence.xml and the same file tangosol-coherence - override.xml.
  The cache server uses a cache service PartitionedPofCache. But the client side using the Distributedcache service. The cluster address is same 224.3.5.2.
  The name of the cluster is also samme. They know.

  D:\coherence\lib>D:\examples\java\bin\run-cache-server.cmd

  D:\coherence\lib>D:\examples\java\bin\run-cache-server.cmd
  The system cannot find the file D:\coherence.
  The system cannot find the file C:\Oracle\Middleware\jdk160_11.
  2009-12-22 12:09:31.400/4.987 Oracle Coherence 3.5.2/463  (thread=main, member=n/a): Loaded operational configurat
  ion from resource "jar:file:/D:/coherence/lib/coherence.jar!/tangosol-coherence.xml"
  2009-12-22 12:09:31.450/5.037 Oracle Coherence 3.5.2/463  (thread=main, member=n/a): Loaded operational overrides
  from resource "jar:file:/D:/coherence/lib/coherence.jar!/tangosol-coherence-override-dev.xml"
  2009-12-22 12:09:31.470/5.057 Oracle Coherence 3.5.2/463  (thread=main, member=n/a): Optional configuration override
   "/tangosol-coherence-override.xml" is not specified
  2009-12-22 12:09:31.540/5.127 Oracle Coherence 3.5.2/463  (thread=main, member=n/a): Optional configuration override
   "/custom-mbeans.xml" is not specified
  
  Oracle Coherence Version 3.5.2/463
   Grid Edition: Development mode
  Copyright (c) 2000, 2009, Oracle and/or its affiliates. All rights reserved.
  
  2009-12-22 12:09:33.864/7.451 Oracle Coherence GE 3.5.2/463  (thread=main, member=n/a): Loaded cache configuration
   from "file:/D:/examples/java/resource/config/examples-cache-config.xml"
  2009-12-22 12:09:39.983/13.570 Oracle Coherence GE 3.5.2/463  (thread=Cluster, member=n/a): Service Cluster joined t
  he cluster with senior service member n/a
  2009-12-22 12:09:43.187/16.774 Oracle Coherence GE 3.5.2/463  (thread=Cluster, member=n/a): Created a new cluster
  "cluster:0xD3FB" with Member(Id=1, Timestamp=2009-12-22 12:09:38.06, Address=192.168.8.80:8088, MachineId=24656, Locatio
  n=process:144, Role=CoherenceServer, Edition=Grid Edition, Mode=Development, CpuCount=1, SocketCount=1) UID=0xC0A8085000
  000125B75D888C60501F98
  2009-12-22 12:09:43.508/17.095 Oracle Coherence GE 3.5.2/463  (thread=Invocation:Management, member=1): Service Mana
  gement joined the cluster with senior service member 1
  2009-12-22 12:09:46.582/20.169 Oracle Coherence GE 3.5.2/463  (thread=DistributedCache:PartitionedPofCache, member=1
  ): Service PartitionedPofCache joined the cluster with senior service member 1
  2009-12-22 12:09:46.672/20.259 Oracle Coherence GE 3.5.2/463  (thread=DistributedCache:PartitionedPofCache, member
  =1): Loading POF configuration from resource "file:/D:/examples/java/resource/config/examples-pof-config.xml"
  2009-12-22 12:09:46.702/20.289 Oracle Coherence GE 3.5.2/463  (thread=DistributedCache:PartitionedPofCache, member
  =1): Loading POF configuration from resource "jar:file:/D:/coherence/lib/coherence.jar!/coherence-pof-config.xml"
  2009-12-22 12:09:47.734/21.321 Oracle Coherence GE 3.5.2/463  (thread=main, member=1): Started DefaultCacheServer.
  ..
  
  SafeCluster: Name=cluster:0xD3FB
  
  Group{Address=224.3.5.2, Port=35463, TTL=4}
  
  MasterMemberSet
    (
    ThisMember=Member(Id=1, Timestamp=2009-12-22 12:09:38.06, Address=192.168.8.80:8088, MachineId=24656, Location=process
  :144, Role=CoherenceServer)
    OldestMember=Member(Id=1, Timestamp=2009-12-22 12:09:38.06, Address=192.168.8.80:8088, MachineId=24656, Location=proce
  ss:144, Role=CoherenceServer)
    ActualMemberSet=MemberSet(Size=1, BitSetCount=2
      Member(Id=1, Timestamp=2009-12-22 12:09:38.06, Address=192.168.8.80:8088, MachineId=24656, Location=process:144, Rol
  e=CoherenceServer)
      )
    RecycleMillis=120000
    RecycleSet=MemberSet(Size=0, BitSetCount=0
      )
    )
  
  Services
    (
    TcpRing{TcpSocketAccepter{State=STATE_OPEN, ServerSocket=192.168.8.80:8088}, Connections=[]}
    ClusterService{Name=Cluster, State=(SERVICE_STARTED, STATE_JOINED), Id=0, Version=3.5, OldestMemberId=1}
    InvocationService{Name=Management, State=(SERVICE_STARTED), Id=1, Version=3.1, OldestMemberId=1}
    DistributedCache{Name=PartitionedPofCache, State=(SERVICE_STARTED), LocalStorage=enabled, PartitionCount=257, BackupCo
  unt=1, AssignedPartitions=257, BackupPartitions=0}
    )
  
  2009-12-22 12:12:29.737/183.324 Oracle Coherence GE 3.5.2/463  (thread=Cluster, member=1): Member(Id=2, Timestamp=20
  09-12-22 12:12:29.541, Address=192.168.8.80:8089, MachineId=24656, Location=process:1188, Role=CoherenceConsole) joined
  Cluster with senior member 1
  2009-12-22 12:12:30.498/184.085 Oracle Coherence GE 3.5.2/463  (thread=Cluster, member=1): Member 2 joined Service M
  anagement with senior member 1
  2009-12-22 12:12:31.860/185.447 Oracle Coherence GE 3.5.2/463  (thread=Cluster, member=1): TcpRing: connecting to me
  mber 2 using TcpSocket{State=STATE_OPEN, Socket=Socket[addr=/192.168.8.80,port=8089,localport=2463]}
  2009-12-22 12:12:51.338/204.925 Oracle Coherence GE 3.5.2/463  (thread=Cluster, member=1): Member 2 joined Service D
  istributedCache with senior member 2
  

  The following command starts a cache client.
  D:\coherence\bin>coherence.cmd

  D:\coherence\bin>coherence.cmd
  ** Starting storage disabled console **
  java version "1.6.0_11"
  Java(TM) SE Runtime Environment (build 1.6.0_11-b03)
  Java HotSpot(TM) Server VM (build 11.0-b16, mixed mode)
  
  2009-12-22 12:12:21.054/3.425 Oracle Coherence 3.5.2/463  (thread=main, member=n/a): Loaded operational configurat
  ion from resource "jar:file:/D:/coherence/lib/coherence.jar!/tangosol-coherence.xml"
  2009-12-22 12:12:21.355/3.726 Oracle Coherence 3.5.2/463  (thread=main, member=n/a): Loaded operational overrides
  from resource "jar:file:/D:/coherence/lib/coherence.jar!/tangosol-coherence-override-dev.xml"
  2009-12-22 12:12:21.365/3.736 Oracle Coherence 3.5.2/463  (thread=main, member=n/a): Optional configuration override
   "/tangosol-coherence-override.xml" is not specified
  2009-12-22 12:12:21.415/3.786 Oracle Coherence 3.5.2/463  (thread=main, member=n/a): Optional configuration override
   "/custom-mbeans.xml" is not specified
  
  Oracle Coherence Version 3.5.2/463
   Grid Edition: Development mode
  Copyright (c) 2000, 2009, Oracle and/or its affiliates. All rights reserved.
  
  2009-12-22 12:12:29.316/11.687 Oracle Coherence GE 3.5.2/463  (thread=Cluster, member=n/a): Service Cluster joined t
  he cluster with senior service member n/a
  2009-12-22 12:12:29.356/11.727 Oracle Coherence GE 3.5.2/463  (thread=Cluster, member=n/a): Failed to satisfy the
  variance: allowed=16, actual=20
  2009-12-22 12:12:29.356/11.727 Oracle Coherence GE 3.5.2/463  (thread=Cluster, member=n/a): Increasing allowable v
  ariance to 17
  2009-12-22 12:12:29.807/12.178 Oracle Coherence GE 3.5.2/463  (thread=Cluster, member=n/a): This Member(Id=2, Time
  stamp=2009-12-22 12:12:29.541, Address=192.168.8.80:8089, MachineId=24656, Location=process:1188, Role=CoherenceConsole,
   Edition=Grid Edition, Mode=Development, CpuCount=1, SocketCount=1) joined cluster "cluster:0xD3FB" with senior Member(I
  d=1, Timestamp=2009-12-22 12:09:38.06, Address=192.168.8.80:8088, MachineId=24656, Location=process:144, Role=CoherenceS
  erver, Edition=Grid Edition, Mode=Development, CpuCount=1, SocketCount=1)
  2009-12-22 12:12:29.977/12.348 Oracle Coherence GE 3.5.2/463  (thread=Cluster, member=n/a): Member 1 joined Service
  Management with senior member 1
  2009-12-22 12:12:29.977/12.348 Oracle Coherence GE 3.5.2/463  (thread=Cluster, member=n/a): Member 1 joined Service
  PartitionedPofCache with senior member 1
  2009-12-22 12:12:30.578/12.949 Oracle Coherence GE 3.5.2/463  (thread=Invocation:Management, member=2): Service Mana
  gement joined the cluster with senior service member 1
  SafeCluster: Name=cluster:0xD3FB
  
  Group{Address=224.3.5.2, Port=35463, TTL=4}
  
  MasterMemberSet
    (
    ThisMember=Member(Id=2, Timestamp=2009-12-22 12:12:29.541, Address=192.168.8.80:8089, MachineId=24656, Location=proces
  s:1188, Role=CoherenceConsole)
    OldestMember=Member(Id=1, Timestamp=2009-12-22 12:09:38.06, Address=192.168.8.80:8088, MachineId=24656, Location=proce
  ss:144, Role=CoherenceServer)
    ActualMemberSet=MemberSet(Size=2, BitSetCount=2
      Member(Id=1, Timestamp=2009-12-22 12:09:38.06, Address=192.168.8.80:8088, MachineId=24656, Location=process:144, Rol
  e=CoherenceServer)
      Member(Id=2, Timestamp=2009-12-22 12:12:29.541, Address=192.168.8.80:8089, MachineId=24656, Location=process:1188, R
  ole=CoherenceConsole)
      )
    RecycleMillis=120000
    RecycleSet=MemberSet(Size=0, BitSetCount=0
      )
    )
  
  Services
    (
    TcpRing{TcpSocketAccepter{State=STATE_OPEN, ServerSocket=192.168.8.80:8089}, Connections=[]}
    ClusterService{Name=Cluster, State=(SERVICE_STARTED, STATE_JOINED), Id=0, Version=3.5, OldestMemberId=1}
    InvocationService{Name=Management, State=(SERVICE_STARTED), Id=1, Version=3.1, OldestMemberId=1}
    )
  
  Map (?):
  
  2009-12-22 12:12:49.505/31.906 Oracle Coherence GE 3.5.2/463  (thread=main, member=2): Loaded cache configuration
  from "jar:file:/D:/coherence/lib/coherence.jar!/coherence-cache-config.xml"
  2009-12-22 12:12:51.358/33.729 Oracle Coherence GE 3.5.2/463  (thread=DistributedCache, member=2): Service Distribut
  edCache joined the cluster with senior service member 2
  
    
    example-distributed
    DistributedCache
    
      
        example-binary-backing-map
      
    
    true
  
  

  But when I try to store data cached from the client side, it reports the error message: it is staorage-disabled people. It shows that this console cache cannot store data in the server cache existing since then using different cache config files.

  Map (ca3): cache ca2
  
    
    example-distributed
    DistributedCache
    
      
        example-binary-backing-map
      
    
    true
  
  
  Map (ca2): put 1 one
  2009-12-22 14:00:04.999/6467.370 Oracle Coherence GE 3.5.2/463  (thread=main, member=2):
  java.lang.RuntimeException: Storage is not configured
          at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$BinaryMap.onMissing
  Storage(DistributedCache.CDB:9)
          at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$BinaryMap.ensureReq
  uestTarget(DistributedCache.CDB:34)
          at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$BinaryMap.put(Distr
  ibutedCache.CDB:22)
          at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$BinaryMap.put(Distr
  ibutedCache.CDB:1)
          at com.tangosol.util.ConverterCollections$ConverterMap.put(ConverterCollections.java:1541)
          at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$ViewMap.put(Distrib
  utedCache.CDB:1)
          at com.tangosol.coherence.component.util.SafeNamedCache.put(SafeNamedCache.CDB:1)
          at com.tangosol.coherence.component.application.console.Coherence.processCommand(Coherence.CDB:581)
          at com.tangosol.coherence.component.application.console.Coherence.run(Coherence.CDB:39)
          at com.tangosol.coherence.component.application.console.Coherence.main(Coherence.CDB:3)
          at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
          at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
          at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
          at java.lang.reflect.Method.invoke(Method.java:597)
          at com.tangosol.net.CacheFactory.main(CacheFactory.java:1400)
  

• Filling of cluster with references

  Hello

  I use "reference clusters" (def of strict type) and they make life much easier when you have a hand VI with a few controls and indicators and to change a property of one of these objects to a Subvi. Everything works fine when I have all the objects in a single VI and want to fill the cluster with "real" references, and valid.

  However, when I couple objects in several different screws and want to fill a single cluster with references, I get errors. What is the best way to get this?

  Attached two ZIP files: Method.zip first and second Method.zip

  Unzip the first Method.zip in a folder, and then open VI_1_First_Method.vi. Run the vi and keep your eyes on the white gauge. Everything works fine and VI_2_First_Method changes the background color of the white gauge.

  Unzip Method.zip second to another folder, and then open Populate_with_real_references_Second_Method.vi. Look at the block diagram. How to fill the Cluster_Second_Method.ctl with the "real" references objects VI_1_Second_Method.vi, VI_2_Second_Method.vi, and VI_3_Second_Method.vi?

  Thank you very much.

  Dan07

  You can do this way:

  

• Extend the current TMS Cluster with two new server

  Hello

  We currently have a cluster of two TMS-Server (13.2.1) installed on a W2K3 Server with a database on a SQL-Server separat

  To have a smooth migration, we thought the following procedure.

  Addition of two new server with W2K8 R2 by installing a TMS 13.2.1 to the cluster with access to the same database.

  After a while remove the two old server and upgrade to TMS14 (updated TMSPE in advance).

  Unfortunately, we get the message, as seen in the PNG-attachment during the installation of the first server in new.

  Anyone know if we could proceed as described above?

  Is the message because of the different operating system. If I click on 'Yes' former TMS-server still works?

  Thank you

  Concerning

  Ingo

  Hello

  The error message is misleading and can be safely ignored, and you can continue with the installation of the new TMS nodes. It was deleted in 14.0 TMS, see bug CSCui34702.

  Kind regards

  Kjetil

• Cluster with VSphere Essentials

  When I try to create a cluster with VSphere Essentials (no more) I'm offered HA and DRS (they are not greyed out, they are available). Are these trial versions that will be disabled in the future, or they are now included in Essentials?

  My understanding is that they would be unavailable at all. that is, they would be gray.

  To view your features under license:

  1. Open the vSphere Client and connect to your vCenter Server
  2. Select a host in your cluster
  3. Click the Configuration tab
  4. Click on the link "Features licensed" under the software

  All licensed features are presented here. Search for "VMware HA" and "VMware DRS" see if they are allowed.

  

• Problems with dvSwitch cluster with leaves HP G6 and G7

  Hi all

  We have an active EVC cluster (vCenter 4.1 /. ESXi4.1) with 490c G6 HP blades. Now, we want to add new 490c G7 HP blades.

  It works without problem in clusters without dvSwitches. In clusters with a dvSwitch, as soon as we add the new host of the dvSwitch, or do any other operation dvSwitch, the new blade Gets a GROUP:

  "#PF exception in the world 4129:helper11 - 0 IP addr 0x417f8011000 0x41802656686c 14.

  If you start the server it CMTF again. If you remove the pole one ESX departure once again, it works, until you try to do an operation on the side the dvSwitch ESX. You will need to do a fresh install on this blade for the ESX Server.

  Everyone makes the same expirience?

  Concerning

  Hideyori

  Have you tried to update the driver for the FlexFabric be2net? The version included in the HP ESXi (Dec 2010) image has some problems, but there are two available VMware now the most recent version.

  -Andreas

• Change the Ip address of a cluster with Vsphere4

  Hi all

  I need help for work I have to do today.

  The problem is:

  -I need to change the ip on my local network addresses, the structure is entirely managed by Vsphere 4.

  -Now I have a HA cluster with 3 hosts, and I need to change the ip addresses of these servers Host1, 2 and 3 and the virtual Center host I ha ve a domain.

  Please, what is the best practice for this job can someone help me with this procedure?

  Thank you very much

  My steps are:

  (1) client connection vsphere in the center of the existing, disconnect all hosts and remove

  (2) stop vcenter services and change IP

  (3) start the vcenter services

  (4) change the address IP of ESXi console x 3

  (5) connection client vsphere with vcenter new ip address and add 3 hosts.

  make sure that any dns or hard-coded host name are modified.

  iDLE-jAM | SC 2, SC 3 & VCP 4

  If you have found this device or any other answer useful please consider useful or correct buttons using attribute points

• I have 2 copies of open Firefox (two different windows with lots of tabs), if I reboot can I restore the two sessions?

  I have 2 copies of open Firefox (two different windows with lots of tabs), if I reboot can I restore the two sessions? I am familiar with clicking history / restoration of previous session, but do not want to reboot to let windows update to do it's thing unless I can restore the two sessions.

  guigs2 said

  If they run different profiles, then Yes.

  Thanks, but I use only 1 profile. However, I found the answer! If I restart/turn off / down pc WITHOUT closing a firefox session, he will come with the screen 'well, it's embarrassing"and list the TWO sessions to restore. The trick is not not to close before stopping! If you close them first, then you can only restore the session first (?).

• can I use 2 Mac Pro, the old and the other from different locations with the same apple ID?

  can I use 2 Mac Pro, the old and the other from different locations with the same apple ID?

  Yes. The only problem that I see if Macs were different countries. The method of payment in the account/ID must be associated with the country where the unit is located and you can only buy Apps from the store of the country where the computers are located