Reminder, not able to start normally.

Similar Questions

• OfficeJet 6600. Works as a printer, but not able to start the scanner.

  OfficeJet 6600. Works as a printer, but not able to start the scanner.

  I am facing a strange behaviour of my camera. I tried to find similar problems on the forum, but did not succeed.

  I started it 2 days (near my 5610 old which seems to have problems of aging). I use a Sony VAIO PC, OS Win7-Pro, updated.

  Running the appliance following the instructions of the poster. Presents the installation CD. Wireless net was successful and the screen of the device is to give the corresponding IP address.

  But this IP has realized the configuration SW is not recognized. I tried thousands of times, switching and on different devices (router, printer and pc) in the order required, uninstall and reinstall the device.

  However, despite the property intellectual not recognized the device functioning as a "printer".

  But I need to use it as a scanner.

  Procedure by selecting the "scan to PC" screen of the device (only available as an option) I get the message "to ensure that the feature is turned on" and I am prompted to 'open the printer HP SW,... '. ».

  Go to Windows and by clicking on "HP SCAN" in the HP/HP Officejet 6600 directory I get the a warning window stating "HP Officejet unidentified 6600.

  Can someone, please?

  Thank you in advance.

  Hey,.

  Try this document! A "no computer has detected" or "Connection error" message when scanning for HP Officejet 6600 e-all-in-one and 6700 Premium e-All-in-One Printer Series (H711)

  Have a great day!

• Message when you try to print "AcroRD32.exe impossible to locate the"..." "Componet app was not able to start because"DLBAGF. "DLL"

  I am trying to print a document and I get this message "AcroRD32.exe Unable to locate component"... "app was not able to start because"DLBAGF. " DLL' not found... Reinstall the application can solve problem... can you me please help... Thank you

  Moved from feedback

  Original title: my problem is with Microsoft Adobe...

  No problem.

  This link can be a good start for you.

  http://forums.Adobe.com/message/4957379

  Good luck with the resolution of the problem.

• Help and Support was not able to start

  When I open help and Support Windows, it shows me the following error message:

  "Help and Support was not able to start
  For more information, contact your system
  administrator or visit
  http://windowshelp.Microsoft.com.
  
  
  (I'm the system administrator only)
  I am facing this problem for more than a year.
  System details:
  
  
  Windows Vista Edition Home Premium SP2 32-bit
  Internet Explorer version 9

  Hi Aditya,

  This could be caused by the virus or corrupted system files on the computer.

  Follow the following troubleshooting methods:

  Method 1:

  Download Microsoft Safety Scanner, then scan your computer for viruses and malware then check how it works.

  You can download Microsoft Safety Scanner from the link "scan to Microsoft Security.

  Note:  The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again. All data that are infected must be cleaned only by deleting all of the data, which means that there is a risk of data loss.

  Method 2:

  Run System File Check to fix the corrupted system files and then check how it works.

  See the link "How to use the file system tool Checker to troubleshoot system missing or damaged files on Windows Vista or Windows 7" to run the System File Check.

  Note: It can ask the Windows DVD difficulty and allowing SFC to do more than minor repairs. Could some of the files saved on your computer are deleted when fixing corrupted files.

  If the problem persists, please answer. We would be happy to help you.

• I resized the partition of C: Lenovo IdeaPad Y500 laptop with the partion of aomei assistant and now I'm not able to start.

  Original title: I messed UP WITH MY 8 PREINSTALLED VICTORY AND IT DOES not START NOW

  My lenovo ideapad y500 supplied with windows 8 pre installed. I wanted to set/resize partitions as the laptop has been delivered with a single partition (C :). after I resized with the partion of aomei Wizard something happened and now I don't am not able to start. my laptop has been delivered with the pre-installed operating system, and she had no DVD of win8. I dinot do the recovery disks either. Some say that the product key is injected into the bios) , so I neednt worry about losing the win8 original license. any means now what shud I do to get reinstalled 8 victory! where can I download an image of victory 8 to install?

  LENOVO has this option of key recovery is not working too now that I changed the partitions. (IE it works if the partitions are unchanged)

  Help, please!

  You have an OEM key - make sure that it is the OEM version of win8.

  Lenovo has a drive engineering key which one of its options is to repair the functionality of the button a magical touch.

  Ask in the Lenovo forum if they can direct you to the download of recovery engineering key a repair disk and how to fix your recovery button.

  http://forums.Lenovo.com

  Can you get to a command prompt to start with a system repair disc or the installation or the upgrade disk...

  and taste the repair orders bootrec.exe/fixboot would be a good idea to start with.

• Not able to start the trial

  I thought I'd give Revel to try, so I just installed the soft of Revel for iPhone on my iPhone4 (running ios 6.1.3).

  I loaded the application; entered by Adobe ID; received a verification email and clicked on the link; entered my date of birth, as requested (why?) and then I get the following error message:

  Not able to start the trial

  There was an error at the start of the free

  trial. Check your network

  connection and try again

  I'm sure it's not a problem with the (WiFi) network connection and I have uninstalled and reinstalled the software and restarted the iPhone for good measure, but I still can not past this.

  Can someone tell me where I'm wrong?

  Thank you!

  Problem solved!

  I connected to the adoberevel.com with my Adobe ID and uploaded a single photo.

  Then I deleted and reinstalled the iPhone application, and this time accepted soft my Adobe ID without problem and displays the photo uploaded. All the features now seem to be working OK.

  I hope this will help someone else with a similar problem!

• By mistake I have disabled the administrator user and now I am not able to start my laptop as when I try to boot my laptop it says disabled administrator.

  I disabled the administrator since the since the link "my computer / manage / local user and groups / user / administrator / properties." Now I am not been able to start my laptop. When I try to start the laptop, it shows the administrator user is disabled.

   
  Please help with a solution
  
  Biju
  New Delhi

  You must restore your registry to a point in time before that you have disabled the administrator user.  It is not easy if there is any left on the system administrator user.

  One way to do this is to start your computer from a CD rescue-style such as BartPE and UBCD4Win or Linux Livecd such as Knoppix.  You can then follow the steps in the following article from part 2, step 6, using GUI to copy and rename the files rather than orders from command-line specified in article.

  "How do I recover from a corrupted registry that prevents Windows XP startup"
    <>http://support.Microsoft.com/kb/307545 >

  If you are not experienced, I recommend to get help.

  HTH,
  JW

• Error - c000021a {fatal system error} the Windows logon system process ended unexpectedly with status 0f 0 x 0000034 (0x00000000 0x00000000), not able to start the computer.

  Original title: computer will not open a session.

  c000021a {fatal system error} the windows logon process prosses systewm ended unexpectedly with status 0f 0 x 0000034 (0x00000000 0x00000000).

  Hi macduf123,

  You did it all change hardware or software on your machine before this problem?

  The STOP 0xC000021A error occurs when Winlogon.exe or Csrss.exe.

  You can follow this link and check if you are able to start correctly on the desktop.

  How to solve an error "STOP 0xC000021A.

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to reinstall windows 8 when it is not able to start and says to unlock the hard disk to refresh or reset?

  I played the game yesterday and system has suddenly stopped responding. so I turned off directly. Since then, my laptop is not start. not even in safe mode. I tried advanced recovery, refresh and reset. non of them work properly. they say unlocked hard dirve and not able to access the disk partition.
  I have 3 partition in my system. and I have all the windows 8 installation of the dvd. and I did not restore the point system also. This is a brand new laptop. How do I fix this problem? looking forward to hear a good solution

  See the thread below for a possible solution.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-system/trying-to-refresh-in-widows-8-message-tha-my-hard/778c5115-c7bd-4319-8717-2af196733306

• After putting the Cluster and ASM is in place, I'm not able to start the ins RDBMS.

  I'm not able to bring up the database.
  Cluster and ASM is running.
  
  ORA-01078: failure in the treatment of system settings
  LRM-00109: could not open the parameter file ' / oracle/app/oracle/product/11.1.0/db_1/dbs/initTMISC11G.ora'

  It seems that it is a spfile to-spfile = +DATA_TIER/dintw10g/parameterfile/spfile_dintw10g.ora

  Now you must create a binding O_H/dbs/spfile .orapointing to +DATA_TIER/dintw10g/parameterfile/spfile_dintw10g.ora

  and try to start the database.

• Oh no - I have edit spfile! Instance is not able to start now

  Hello
  
  I opened my spfileorcl and tried to add an another controlfile - then I changed it as it was before, but now the Instance is unbootable. I'm not able to write again. What can I do now?
  
  Thank you
  Michael

  Do you have a backup/copy of it? otherwise, I suggest starting with the pfile file PB... an example

  Startup pfile = "";

  If it works then run this example command o create a new spfile

  create spfile ='d:\oraadmin\db1\scripts\spfiledb1.ora "of pfil'd:\oraadmin\db1\scripts\initdb1.ora."

• Not able to start computer to Windows VIsta: error event critical ID 10

  Original title: Critical Error Event ID 10

  Yesterday my office started to show a very serious mistake. The symptoms are:

  * On the Dell splash screen, there are tiny dots blue/purple (hard to tell) on the entire screen.
  * If I allow him to continue to boot normally, it will pass through the screen with the little bar at the bottom of the screen, then it will go black and not change again. I have to make a hard stop.
  * If I hit F2 or F12 (menus on the start sequence), first black screen covered with symbols of the dollar ($) rises. The menu right then there is upward, except that it's full of spelling mistakes, signs and random symbols replacing letters and scattered everywhere.
  * I changed the boot sequence to boot from the optical drive first and booted from the Vista disc came with my computer. The screen "Press any key to start from the CD-ROM or DVD" was also covered with dollar signs. From there on, I was able to get the Startup Repair menu. Nothing could be resolved here.
  I managed to get into Safe Mode and view the event log. The only recurring error event that corresponds to the period is:
  Source: WMI
  Event ID: 10
  Task category: no
  General: Filter event with the query "SELECT * FROM __InstanceModificationEvent WITHIN 60.

  WHERE TargetInstance ISA 'Win32_Processor' AND TargetInstance.LoadPercentage
  > 99 "could not be reactivated in namespace '//./root/CIMV2' due to
  error 0 x 80041003. Events cannot be delivered through this filter until the
  problem is solved.

  Details (XML):

  
  GUID = "{1edeee53-0afe-4609-b846-d8c0b2075b1f}" = 'WinMgmt' EventSourceName / >

  10

  0

  2

  0

  0

  0 x 80000000000000

  ./root/CIMV2

  SELECT * FROM __InstanceModificationEvent WITHIN 60 WHERE
  TargetInstance ISA 'Win32_Processor' AND TargetInstance.LoadPercentage >
  99

  0 x 80041003

  Here are my specs:
  Model: Dell XPS 630I
  OS: Vista Edition Home Premium SP2 x 32
  Processor: Intel Core 2 Quad Q6600 @2. 40 GHz
  RAM: 4 GB
  Someone at - it suggestions?

  Yes, funny thing. Computer fixed now, but I don't know why. I've done one or two things in quick succession without trying a boot between them, so something has resolved, but I don't know what.

  The chkdsk says that it remove a bunch of files, so maybe that's her. I cleaned all the dust from inside, so that may have contributed. I also disconnected and then reconnected the graphics card (a big ' ole dedicated NVIDIA one), what could be the fixer as well.
  I'm inclined to think it's the graphics, since, as I mentioned above, my old laptop was showing similar symptoms when its GPU went wrong.
  So yes, the problem is solved. If all goes well at all times. Mods, feel free to close this topic.

• When I installed oracle 10g am not able to start my application

  Hi all
  Using ATG 9.1 my application works fine, but after I installed oracle 10g my Jboss starts up, but I couldn't run my application?
  This shows that the requested Url is not found...
  
  Could you please tell me why this happens...
  
  Thanks in advance...
  
  Thank you and best regards,
  Sudhakar.

  This happens in oracle 10g for oracle 10g is also used as the default http port 8080.
  And if your application server is running on default 8080 port you ll see this problem.

  To solve this, all you need to do is change the port to some other port number 8080 by default oracle.
  See the link below to change the port.
  http://daust.blogspot.in/2006/01/XE-changing-default-HTTP-port.html

  After changing the port, restart your computer again and you should be able to access your application very well.

  ~ Yvan

  Published by: Yvan November 6, 2012 01:08

• Not able to start Ubuntu live CD or USB - Satellite A300-13 s

  Hello

  I hope someone can help me with that. I just got a new A300-13 s pre-installed with Windows Vista Home Premium. I managed to create a recovery DVD (after having had the same hassle of having to use a specific brand of DVD, as mentioned in other posts) and have tested the DVD, which works very well.

  My problem is this: I want to dual-boot with Ubuntu 8.10 and so have created a live CD to test that everything works before I realize a complete installation. I rebooted, but the laptop does not see the live CD and boot directly into Windows. I tried both the F12 Boot Manager and change the boot order of the bios via F2. Curiously, when the bios boot order is changed, Windows then can not see the DVD drive (via the computer - I haven't checked other roads on the disk).

  I know that the DVD player works when starting, because I can boot to the Windows recovery DVD.

  I thought it might be a problem of compatibility of the hard drive, but I can access the contents of the ubuntu CD (when the HARD drive is the first in the bios boot order). I also tried to copy the files on a USB key. The laptop can see the drive when you start, but do not consider the iso as a system valid. I did the checking relevant md5sum and they are all very good. The live CD is also work in another computer.

  Does anyone have any suggestions? Am I missing something?

  Thanks in advance - this is starting to get a little nuts.

  Have you tried to change the SATA Mode in the BIOS? You may need to put in compatibility/IDE mode.

• HP pavilion 15-AC181NIA: laptop hp laptop pavilion 15-AC181NIA Intel pentium my brother is not able to start windows. Windows 8, 64

  The laptop is not booting of windows; Windows 8
  He pointed out that he cannot start Windows

  The test succeeded, past test of memory and hard drive too, installed a new windows 8 pro version, thank you