remote access to manage the Firewall works not

Similar Questions

• Can not get to start remote access connection manager and the connections don't work Internet

  Original title: wired & wireless connections does not.

  I can not get the remote access connection manager to start and so no internet connection is not working, also I can't open the system restore to go back on this machine. What is this?

  I am running a Dell Studio 1735 PP31L w model number / Edition Vista Home premium.

  Hi Rick,

  1. what happens when you try to start the remote access connection manager? You receive messages or error codes?

  2. you receive error codes or restore messages when you perform the system?

  You can check the status of the following services and make sure that the services are started.

  a. Click Start and type Services in start search and press ENTER.

  b. in the services with the right button on the phone and then click Properties.

  c. under the general tab, select automatic next to startup type.

  d. under the general tab, click Start under the service status and then click apply and then click OK.

  e. Repeat steps c & d to the remote access connection manager and Remote Access Auto Connection Manager service.

  Hope this information is useful.

• The remote access connection manager could not start. Error 2: cannot find the specified file.

  I've updated from vista to the most recent update.

  I have windows vista Home premium 32-bit.
  I want to get this matter resolved without having to reinstall as I have a few games installed it on this system.
  The modem is not the issue as other computers connect very well.
  Thanks for the help from Microsoft.
  Recently, I tried to connect to the internet but that was not possible, because no connection could be established. The remote access connection manager does not start 2 error: could not find the specified domain. the RasMan-dependent services are started, but Manager logins remote does not start.

  Hi Mundilfar,

  You can try the folliwng steps and see if it helps.

  Step 1:

  You can try to scan the file system [SFC] checker on the computer that will replace missing or corrupt files & check if the problem persists.

  For more information, you can consult the following link.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  Step 2:

  If you are always faced with the question, then you can try to give permission for the Rasman registry key and see if it helps.

  Important: The following steps show you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  For more information about how to back up and restore the registry, follow the steps from the link below:

  Back up the registry

  a. Click Start, type regedit in the search box and press ENTER.

  b. Locate the following subkey:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\RasMan

  c. right click on the key and click Permissions.

  d. Select Advanced, click on owner tab, click your user name, and check the 'Replace owner of subcontainers and objects', click Apply - click OK.

  e. click the user or group name that you want to work with.

  f. check allow total control. Click apply and then click OK.

  g. restart the computer and check.

  Hope this information is useful.

• When I try to start the Remote Access Connection Manager in services.msc, the service will not start.

  Rick2425

  When I try to start the Remote Access Connection Manager in services.msc, the service will not start. I get the same error: "Windows could not start the service of connection manager on the local computer remote access: Error 1068: the dependency service or group could start."  Also, I can not restore the system to come and let me run it.

  It is a Dell PP31L, which belongs to a friend who does not connect to the internet because of these error messages.

  Hello Rick2425

  See the thread below and let me know if it helps thanks.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-networking/error-1068-remote-access-connection-manager/b5155a8a-671e-4d11-8a99-deadc7aee8a1

• Failed to start Remote Access Connection Manager Service. Get the 20 error: the system cannot find the specified device.

  This seems to have started with the last batch of updates of Windows 7 (including SP1).
  I can't connect using dial-up.  Get the message:
  Cannot load the Remote Access Connection Manager service
  Error 711: The operation could not complete because it could not start the remote access connection manager service
  in time.  Please try the operation again.

  When I try to start the Remote Access Connection Manager service manually, I get the message:
  Windows could not start the service on Local computer remote access connection manager.
  20 error: the system cannot find the specified device.

  My phone displays the modem works properly, and telephony and the Secure Socket Tunneling Protocol service started.

  I don't know what else might have changed.

  Hello Vince_867,

  Thanks for your post.  Take a look at this thread for a possible solution to your problem.

  See you soon

• Error 1068: the dependency service or group failed to start and failed to start the remote access connection manager service.

  Original title: Windows could not start the service of connection manager on the local computer remote access

  amplifier

  Windows could not start the service of connection manager on the local computer remote access

  Error 1068: The dependency Service or group could start.

  Hi sunelchandraoli,

  1. when exactly you receive this error?

  2. you remember to make changes to the computer before this problem?

  Step 1:

  "Make sure that all the services of the dependence of the"Remote Access Connection Manager"" are launched in the list of services...

  a. Click Start, type services.msc in the box start the search.

  b. select Services from the list programs. If you are prompted for an administrator password or a confirmation, type your password or click on continue

  c. right click on the Remote Access Connection Manager service and then click Properties.

  d. under the general tab, click Manual next to startup type.

  e. under the general tab, click Start under the service status and then click OK.

  f. also check for long-term services.

  The dependency of 'Remote access connection manager' services include:

  i. secure Socket Tunneling Protocol Service

  II. telephone

  III. Plug-and-Play

  IV. Remote Procedure Call (RPC)

  c. of DCOM Server process Launcher

  VI RPC end point mapper.

  Make sure that the above services are started in the services list. If this is not the case, start all services above and check.

  Step 2:

  You can also try a system restore to a prior restore point you have been affected by the issue.

  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  To run the system restore, you can consult the following link:

  System restore

  http://Windows.Microsoft.com/en-us/Windows7/what-is-system-restore

  System Restore: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/system-restore-frequently-asked-questions

  Hope this information is useful.

• Cannot connect to internet after start - found that the firewall is not enabled

  Original title: when the pc is turned on, unable to connect to the internet, found the firewall is not turned on. After repeated clicks, it finally works

  When the pc is turned on, I can not connect to the internet. I found that the firewall is not enabled. went to the control panel and clicked on the firewall and got the message that he could not appear, also could not click the security icon. After having repeated clicks and play with him, he finally turns on and I can use the pc normally. also now when I go into the control panel I just get a list up and down things on the control panel. used to occupy the entire screen from left to right. in color, maybe these two things are related, I do not know

  When the pc is turned on, I can not connect to the internet. I found that the firewall is not enabled. went to the control panel and clicked on the firewall and got the message that he could not appear, also could not click the security icon. After having repeated clicks and play with him, he finally turns on and I can use the pc normally. also now when I go into the control panel I just get a list up and down things on the control panel. used to occupy the entire screen from left to right. in color, maybe these two things are related, I do not know

  It's just a detailed view...

  I suggest some standard maintenance and cleaning which will generally help as you allow to get acquainted with your machine so that you can restrict the possibilities...

  Search for malware:

  Download, install, execute, update and perform analyses complete system with the two following applications:

  • MalwareBytes (FREE)
  • SuperAntiSpyware (FREE)

  Remove anything they find.  Reboot when necessary.  (You can uninstall one or both when finished.)

  Search online with eSet Online Scanner.

  The less you have to run all the time, most things you want to run will perform:

  Use Autoruns to understand this all starts when your computer's / when you log in.  Look for whatever it is you do not know using Google (or ask here.)  You can hopefully figure out if there are things from when your computer does (or connect) you don't not need and then configure them (through their own built-in mechanisms is the preferred method) so they do not - start using your resources without reason.

  You can download and use Process Explorer to see exactly what is taking your time processor/CPU and memory.  This can help you to identify applications that you might want to consider alternatives for and get rid of all together.

  Do a house cleaning and the dust of this hard drive:

  You can free up disk space (will also help get rid of the things that you do not use) through the following steps:

  Windows XP should take between 4.5 and 9 GB * with * an Office suite, editing Photo software, alternative Internet browser (s), various Internet plugins and a host of other things installed.

  If you are comfortable with the stability of your system, you can delete the uninstall of patches which has installed Windows XP...
  http://www3.TELUS.NET/dandemar/spack.htm
  (Especially of interest here - #4)
  (Variant: http://www.dougknox.com/xp/utils/xp_hotfix_backup.htm )

  You can run disk - integrated into Windows XP - cleanup to erase everything except your last restore point and yet more 'free '... files cleaning

  How to use disk cleanup
  http://support.Microsoft.com/kb/310312

  You can disable hibernation if it is enabled and you do not...

  When you Hibernate your computer, Windows saves the contents of the system memory in the hiberfil.sys file. As a result, the size of the hiberfil.sys file will always be equal to the amount of physical memory in your system. If you don't use the Hibernate feature and want to reclaim the space used by Windows for the hiberfil.sys file, perform the following steps:

  -Start the Control Panel Power Options applet (go to start, settings, Control Panel, and then click Power Options).
  -Select the Hibernate tab, uncheck "Activate the hibernation", and then click OK. Although you might think otherwise, selecting never under "Hibernate" option on the power management tab does not delete the hiberfil.sys file.
  -Windows remove the "Hibernate" option on the power management tab and delete the hiberfil.sys file.

  You can control the amount of space your system restore can use...

  1. Click Start, right click my computer and then click Properties.
  2. click on the System Restore tab.
  3. highlight one of your readers (or C: If you only) and click on the button "settings".
  4 change the percentage of disk space you want to allow... I suggest moving the slider until you have about 1 GB (1024 MB or close to that...)
  5. click on OK. Then click OK again.

  You can control the amount of space used may or may not temporary Internet files...

  Empty the temporary Internet files and reduce the size, that it stores a size between 64 MB and 128 MB...

  -Open a copy of Microsoft Internet Explorer.
  -Select TOOLS - Internet Options.
  -On the general tab in the section 'Temporary Internet files', follow these steps:
  -Click on 'Delete the Cookies' (click OK)
  -Click on "Settings" and change the "amount of disk space to use: ' something between 64 MB and 128 MB. (There may be many more now.)
  -Click OK.
  -Click on 'Delete files', then select "Delete all offline content" (the box), and then click OK. (If you had a LOT, it can take 2 to 10 minutes or more).
  -Once it's done, click OK, close Internet Explorer, open Internet Explorer.

  You can use an application that scans your system for the log files and temporary files and use it to get rid of those who:

  CCleaner (free!)
  http://www.CCleaner.com/
  (just disk cleanup - do not play with the part of the registry for the moment)

  Other ways to free up space...

  SequoiaView
  http://www.win.Tue.nl/SequoiaView/

  JDiskReport
  http://www.jgoodies.com/freeware/JDiskReport/index.html

  Those who can help you discover visually where all space is used.  Then, you can determine what to do.

  After that - you want to check any physical errors and fix everything for efficient access"

  CHKDSK
  How to scan your disks for errors* will take time and a reboot.

  Defragment
  How to defragment your hard drives* will take time

  Cleaning the components of update on your Windows XP computer

  While probably not 100% necessary-, it is probably a good idea at this time to ensure that you continue to get the updates you need.  This will help you ensure that your system update is ready to do it for you.

  Download and run the MSRT tool manually:
  http://www.Microsoft.com/security/malwareremove/default.mspx
  (Ignore the details and download the tool to download and save to your desktop, run it.)

  Reset.

  Download/install the latest program Windows installation (for your operating system):
  (Windows XP 32-bit: WindowsXP-KB942288-v3 - x 86 .exe )
  (Download and save it to your desktop, run it.)

  Reset.

  and...

  Download the latest version of Windows Update (x 86) agent here:
  http://go.Microsoft.com/fwlink/?LinkId=91237
  ... and save it to the root of your C:\ drive. After you register on the root of the C:\ drive, follow these steps:

  Close all Internet Explorer Windows and other applications.

  AutoScan--> RUN and type:
  %SystemDrive%\windowsupdateagent30-x86.exe /WUFORCE
  --> Click OK.

  (If asked, select 'Run'). --> Click on NEXT--> select 'I agree' and click NEXT--> where he completed the installation, click "Finish"...

  Reset.

  Now reset your Windows with this FixIt components update (you * NOT * use the aggressive version):
  How to reset the Windows Update components?

  Reset.

  Now that your system is generally free of malicious software (assuming you have an AntiVirus application), you've cleaned the "additional applications" that could be running and picking up your precious memory and the processor, you have authorized out of valuable and makes disk space as there are no problems with the drive itself and your Windows Update components are updates and should work fine - it is only only one other thing you pouvez wish to make:

  Get and install the hardware device last drivers for your system hardware/system manufacturers support and/or download web site.

  If you want, come back and let us know a bit more information on your system - particularly the brand / model of the system, you have - and maybe someone here can guide you to the place s x of law to this end.  This isn't 100% necessary - but I'd be willing to bet that you would gain some performance and features in making this part.

• EA4500 FTP server remote access fails with active firewall

  I tried to access my drive connected to the USB port of the EA4500 remotely and it didn't until I disabled the firewall SPI IPv4/IPv6 options. If anyone else noticed that? Surely, the firewall must not block the own FTP server on the router!

  P.S. A friend with an EA3500 had the same problem.

  After the reset, all you need to do is to activate the FTP and uncheck the "block Internet applications anonymous" and it will work.

  Speaking from my own experience, it you start to turn things market... and offshore and on... something is finally going to get messed up in the router and ask you to do a hard reset.

• Why can't I start Remote Access Connection Manager

  I am not able to connect to internet using my 3G Broadband. I try to resolve the status of the remote access connection manager to "on the road", but the error message invites up to said "Windows could not start the service on local computer remote access connection manager. Error 1068: the dependency service or group could start. "I find the dependencies are Remote Access Auto Connection Manager, routing and remote access, Sharing (ICS) to connect Internet. I tried to put those 3 to "started", but was able to start also.

  Hello
   
  You must make sure that the underside of services are started and restart your computer and check if the problem is resolved.
   
  To start the services.
   
  1. click on start.
  2. type Services.msc in the search box and click on enter.
   
  Note: the common addiction for "Remote Access Connection Manager" and 'Remote Access Auto Connection Manager' is 'Secure Socket Tunneling Protocol Service'.
   
  Make sure that you check the properties of service no matter what you try to start, then click the dependency tab and make sure that you select the dependency registered under this service services.
   
  The dependency of 'Remote access connection manager' services include:
   
  a. secure Socket Tunneling Protocol Service
  b. phone
  c. Plug-and-Play
  d. remote Procedure Call (RPC)
  e. DCOM Server process Launcher
  f. RPC end point mapper
   
  Make sure that you try to start the Connection Manager Service dependency services automatic remote access as well.
   
  Method 2:
   
  I recommend you to update the drivers and see if it makes a difference. You must be logged on as administrator to perform these steps.
   
  1. open Device Manager by clicking the Start button, click on the Control Panel, clicking system and Maintenance, and then clicking Device Manager. If you are prompted for an administrator password or a confirmation, type the assword or provide confirmation.
  2. in Device Manager, locate the device, and then double-click the device name.
  3. click Driver tab, then click on set to update driver and follow the instructions.
   
  Try to follow the link provided to update a hardware driver that is not working properly and check the question below.
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Thank you, and in what concerns:
  I. Suuresh Kumar - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  

• Remote Access Connection Manager

  What is Remote Access Connection Manager and what is it?        PS. I don't know what Windows topic category and applications, this falls under, but since I HAD to choose one...  Thank you for your help.

  Hi bjeja,

  Welcome to the Microsoft community where you can find all the answers related to windows.

  Remote Access Connection manager manages connections dial-up and virtual private network (VPN) from the computer to the Internet or other remote networks.

  If you have questions about Windows do not hesitate to answer and we will be happy to help.

• Ports blocked but Firewall works not

  I had a virus a few days ago, VistaPRO antivirus thing.  Windows Security Essentials does not pick it up, but ad-aware has done and cleaned up.  Since then, I could not connect to Yahoo, I-tunes store and several other applications.  The firewall does not block ports, and I finally turned it off.  Windows Defender is turned off, and my router is open ports.  Yet, these software are still unable to connect even though I am active on the network.  Can someone please give me some advice? p.s. went to firebind.com and tested the ports for yahoo and i-tunes in particular, and it is said that they are NOT blocked, but Windows won't let not the applications run. Help, please.

  Thank you very much for your answer.  It helped me to understand what was wrong. Malwarebytes found no object, but the problem was found when you try to download Spybot.  Apparently the virus has changed my IE network settings to require a proxy 127.0.0.1 (Loopback).  Download Spybot nicely displays this information from "(tentative de connexion àle serveur 127.0.0.1)."  This would not affect my connection to the Internet browser so I did not notice a problem but once this setting has been removed, the external programs for IE began to work very well.

• How to cancel my membership creative cloud when the option "manage the plan" does not appear as an option on my screen?

  How to cancel my membership creative cloud when the option "manage the plan" does not appear as an option on my screen?

  Cancel your subscription or membership. Creative cloud

• Profile Manager - failed to install the remote access profile in the domain environment & multi-Active Network Directory

  Hi all

  I am a COMPUTER administrator for a college and I am trying to fix what seems to be the last hurdle in getting the Profile Manager works correctly.

  I worked for a while now trying to get the Profile Manager capable of pushing the device and profiles for Mac in our group network environment. I was able to operate intermittently, but not often. Most of the time I'm unable to install the remote management profile.

  When you try to install the remote management profile, I give myself one of the two errors-

  The first error is:

  The Installation of the profile failed.

  The «TeleManagement (com.apple.config. » profile (Server.FQDN.mdm:GUID) "could not be installed because of an unexpected error < MDMResponseStatus:500 >

  (Obviously server.fqdn and GUID are placeholders for their actual values)

  

  The second mistake is:

  The Installation of the profile failed.

  Failed to contact the Protocol SCEP server to ""http://server.fqdn: 1640/CEP / "."

  

  The server Mac OS X 10.11.4 works

  OS X Server is version 5.1

  Client Mac is for most running 10.10.4

  Here's a quick run down on the environment and the steps I have already taken to solve the problem.

  • The network is an Active Directory with several networks multi-domain environment. I mainly work with two different networks, each associated with one of the two areas.
  • The Mac server hosting the Profile Manager is a Mac Pro. The two network cards is used, each on one of the two networks. The Mac server is joined to the domain in the primary forest.
  • I opened all the ports and IP ranges for Apple's Push Notification service for two on our firewall and tested networks between the two networks to ensure that the AFN is accessible.
  • I created a static DNS entry for the server in the DNS zone for the main domain. I also have a separate DNS zone for the DNS record for the interface on the secondary network. I also confirmed that Macs see the correct IP address of the Mac server for their network.
  • I tried to change the settings for network access for the Profile Manager. The first error seems to happen when the Profile Manager are restricted to the network the Mac client is not connected. This same error also occurs if I open Manager profile access to "all networks".
  • I have experiemented with the different certificate types. In general, I use the self-signed certificates that are generated automatically. In this scenario, I install the profile Trust first (which works seamlessly regardless of network or domain). I also tried to use a certificate for Code signing signed with our own CA to sign the profile of remote management. The same errors will occur no matter what certificates are used.
  • The second error occurs when the access profile manager is limited to the same network that is connected to the Mac client
  • I ran Wireshark captures on several client computers, as well as on the Mac server interfaces and haven't seen any traffic blocked or rejected that seemed related to the Profile Manager
  • I've deleted and rebuilt my OD master
  • I also scoured newspapers for clues Profile Manager and haven't found much
  • In addition, I have also studied the problem and error codes/etc widely and have not found a lot of useful information
  • I don't know there are any other troubleshooting steps I took as well, but I've been question bout this for awhile and I don't remember everyone.

  That's a strange thing - I had it working for Mac on the main network and the domain. However, I discovered that the Mac on the secondary network and the field was unable to download the profile of remote management. This is when I started to change the Profile Manager, access network, which eventually introduce the problem on Macs connected to the primary/field of experimentation network. Change access return settings in Profile Manager does not restore functionality for pimps who worked.

  Another thing odd in this test scenario all - Mac on the network high school/area would not install remote profile unless management I temporarily moved it to the main network (I do not untie / reassign to one the main domain on these Macs) I could get the profile of remote management to install and then pushing profiles has worked. Even more strange, it's the Mac that I had to move temporarily secondary network to the main network to allow remote management profile install only works always as long as the Profile Manager are restricted to the secondary network and 'the Mac'. However, Macs in the same room, on the same network in the same field, using the exact image even get the errors described above.

  The only thing I have not yet done is delete/reconstruction Profile Manager. I would really like to avoid this if possible. Solutions that involve something like Casper or other software integration AD for Macs are also a non-starter.

  I'm happy to elaborate if necessary. I appreciate the help.

  Okay, I think I can find the root cause.

  Before this discovery, I had completely rebuilt Profile Manager. Now, I managed by pushing the management profile remote for Mac in the two fields/networks. However, many of them still refuse to install remote management profile.

  Macs who encounter the problem are all were imaged using NetRestore using an image captured from an another similar iMac. IMac even that was used to build the image has now been reassigned in a test of Mac. I found that when you attempt to register one of the Mac who had received this image it shows already as "registered" when you go to "mydevices" on my Mac server. I also noticed that they all have the serial number of the test Mac when viewing their "register". Among the issues of Macs, I activated the lock of the device from the page "mydevices" for the so-called problematic Mac registered (showing the serial number of the iMac used to create the image) and it locked the iMac used to create the image - not the Mac issue.

  This tells me that the CID (or Mac equivalent) is set on the Mac CID used to create the image for all of the Mac said image was deployed to. If it's a Windows box I have a sysprep prior to deployment or could perform a rearm after the fact. I am unaware of how to perform similar functions in OS X.

  I tested also since on some Macs that do not have this image, and they are able to register and install the profile of Managing remotely with success.

  If anyone has any suggestions on how to reset the CID (the computer ID) under OS X, I'd appreciate it. Thank you.

• IP in the firewall does not work in ESXi 5.5 are they allowed?

  Hello to all users of the VMWare communities,

  I am new to the management and use of VMWare.

  Recently, we bought a server with VMWare VSphere ESXi 5.5.

  It is on an ISP, with a public IP address in which VMWare management network is configured. By default, all the management ports are open (SSH, Web, VSphere Client ports, and a lot of more ports I think I won't use...).

  The problem is that I want to protect as much as possible this host. I have no external firewall to this host to close unused ports so I want to use the built-in firewall.

  I am trying to use the feature "Allowed IP addresses" the integrated firewall of ESXi, but it does not work. I want to only allow SSH connections and management via vsphere client of static public ip address from my office, I put this IP address in the settings of the firewall for each service, but apparently it does not work, I can still continue to access across all services.

  No idea who might be the problem?

  Thank you very much.

  Finally, I found the problem.

  The firewall is disabled!

  I connect to ssh host and do: 'esxcli get network firewall' to get the status of the firewall and after seeing it is disabled, "esxcli network - enabled true firewall.

  I Don t know why, but by default in the installation of vmware, the firewall is disabled.

  After that I enabled, apparently it remains enabled between restarts.

  Thank you everyone (for nothing ;-\)

• A Site to remote access VPN behind the same public IP address

  Got a problem quite stupid.  We have a VPN from Site to Site configured for a new data center, which will be responsible for general traffic management.  In addition, some users need to use use a VPN client to access certain areas.  The firewall at the Office only has a public IP address, so the two will come to the Site to Site VPN for remote access from the same source.

  This seems a problem with legacy Cisco VPN clients because encryption card matches the entry VPN site-to-site, even if they use VPN clients.  A good/simple solution to solve this problem?

  Some newspapers (198.18.85.23) is the address public IP for the office and the tom.jones is the user.  192.168.1.0/24 is the pool of the VPN client.

  January 7, 2014 19:12:52 ASA5515: % 713130-5-ASA: Group = Corp-VPN, Username = tom.smith, IP = 198.18.85.23, transaction mode attribute unhandled received: 5

  January 7, 2014 19:12:52 ASA5515: % 737003-5-ASA: PISG: DHCP not configured, no viable servers found for tunnel-group "Corp-VPN.

  January 7, 2014 19:12:52 ASA5515: % 713119-5-ASA: Group = Corp-VPN, Username = tom.smith, IP = 198.18.85.23, PHASE 1 COMPLETED

  January 7, 2014 19:12:52 ASA5515: % ASA-3-713061: Group = Corp-VPN, Username = tom.smith, IP = 198.18.85.23, IPSec tunnel rejecting: no entry for crypto for proxy card remote proxy 192.168.1.4/255.255.255.255/0/0 local 0.0.0.0/0.0.0.0/0/0 on the interface outside

  January 7, 2014 19:12:52 ASA5515: % ASA-3-713902: Group = Corp-VPN, Username = tom.smith, IP = 198.18.85.23, error QM WSF (P2 struct & 0x00007fff28dab560, mess id 0x37575f3c).

  January 7, 2014 19:12:52 ASA5515: % ASA-3-713902: Group = Corp-VPN, Username = tom.smith, IP = 198.18.85.23, peer table correlator Removing failed, no match!

  January 7, 2014 19:12:52 ASA5515: % 713259-5-ASA: Group = Corp-VPN, Username = tom.smith, IP = 198.18.85.23, Session is be demolished. Reason: political crypto card not found

  January 7, 2014 19:12:52 ASA5515: % ASA-4-113019: Group = Corp-VPN, Username = tom.smith, IP = 198.18.85.23, disconnected Session. Session type: IKEv1, duration: 0 h: 00 m: 02s, xmt bytes: 0, RRs bytes: 0, right: not found card crypto policy

  January 7, 2014 19:12:53 ASA5515: % 713904-5-ASA: IP = 198.18.85.23, encrypted packet received with any HIS correspondent, drop

  Hello

  Don't know if this will work, but you can try the following configuration (with the rest of the VPN configuration)

  list-access CLIENT VPN ip enable any 192.168.1.0 255.255.255.0

  card crypto OUTSIDE_map 4 is the VPN CLIENT address

  card crypto OUTSIDE_map 4 set peer 198.18.85.23

  card crypto OUTSIDE_map 4 set ikev1 transform-set ESP-AES-128-SHA ESP-3DES-SHA

  The idea would be to have the ACL matches the VPN full Tunnel that the Client attempts to establish. (destination "any" from the point of view of the customer, the ASAs view source)

  I tested briefly on my own SAA by connecting from an IP address to which the ASA offers free VPN in L2L. But as I don't have the operational L2L VPN, I can't really verify the VPN L2L at the moment. Thus, certain risks may be involved if you can afford it.

  -Jouni