Remove 'available room' all-day SX20

Similar Questions

• loading cursor worked all day

  How can I get my loading cursor to stop running? He has been running around in circles all day?

  Hello

  Please perform a hard reset first. A hard or forced Reset clears all the information in the memory of the computer which can restore the functionality. Reset your computer forces the system to erase and restore the software connections between the BIOS and hardware.

  Please find the below steps:

  Hard Reset a laptop computer with a removable battery

  To perform a hard reset on a computer equipped with a removable battery, follow these steps:

  1. Turn off the computer.
  2. Remove the computer from the docking station or port replicator.
  3. Disconnect all external devices from devices such as USB, external displays storage devices and printers.
  4. Disconnect the power adapter from the computer.
  5. Remove the battery from the compartment to batteries.
  6. Press and hold the power button for about 15 seconds, remove any residual electric charge capacitors that protect memory.
  7. Insert the battery and plug the power adapter into the laptop, but do not connect peripheral devices.
  8. Press the power button to turn on the computer.
  9. If a boot menu appears, use the arrow keys to select start Windows normally and then press the Enter key.
  10. After you have reconnected each peripheral device, run Windows Update and HP Support Assistant to update all device drivers.

  Hard Reset a laptop with a sealed or non-removable battery

  NOTE: Do not try to remove a sealed battery, as this may void your warranty.

  1. Turn off the computer.
  2. Remove the computer from the docking station or port replicator.
  3. Disconnect all external devices from devices such as USB, external displays storage devices and printers.
  4. Disconnect the power adapter from the computer.
  5. Perform button for your computer model by following the instructions in the following table.

  If Notepad starts meet after a Hard Reset, but is still slow, please follow the steps described in the following document:

   

  Improve the performance of the system without adding memory (Windows 8):

  http://support.HP.com/us-en/document/c03340676

   

  Improve the performance of the system without adding memory (Windows 7): http://support.HP.com/us-en/document/c01817290

  Please select the document depending on the operating system on your laptop. Please make sure you follow all the steps mentioned religiously for best results.

   

  If the two solutions above (Hard Reset and the Document above) do not, help us, please run a Diagnostic Test on the hard drive.

   

  Test a hard drive from the BIOS: http://support.HP.com/us-en/document/c00439024

   

   

  Screening of hardware failures (Windows 8): http://support.HP.com/us-en/document/c03467259

  Please see the hard drive in the above document to test from the Hardware Diagnostic tools.

   

  I hope this helps.

   

  !------------------- Please click on the star of CONGRATULATIONS on the left to say 'thank you '. Check the box "Accept as Solution" if she answers / solves your problem. Thank you-----------------------------------------------------------------!

  I am an employee of HP.

   

• Word document worked on all day - great content lost reason error edition - backup anywhere?

  Hi, Word v7 - can't believe I can not even find a previous version since the night before or in the morning.  He worked on the paper all day.  Opening, saving, closing.  Shut down the PC at some point.  Lost the main content of the document by highlighting and backspaced - remove effectively.  Then I saved file and File closed.

  Any suggestions gratefully received.

  Hi Maggie,

  Thanks for posting your query on the Microsoft Community.

  If I understand you correctly, accidentally, you deleted large content from a word document. Correct me if I'm wrong. I suggest you to return the article mentioned below and see if it helps you to recover lost files.

  How to recover a lost Word document

  How to recover a lost in Word 2007 or Word 2003 file

  Hope that the information provided is useful. Let us know if you have any concerns related to Windows. We will be more than happy to help you.

  Kind regards

• How to make a program available to all users if the program was installed for a user

  Basically, the problem is that I created another user account, but only a few random apps appear on it and I was REALLY looking FORWARD to having to reinstall some programs + 50 so my computer can function normally on my secondary account.  I am able to find a lot of programs installed by snooping around in Explorer and have been able to run some by creating shortcuts, but many of them (Spybot, Itunes, Google Chrome, THE LIST GOES ON!) nothing do when the .exe is open and are unusable (on this account).
  Also, I want to say there is no page support for Windows 7 that cover this topic (that I could find by using the provided search engine), and the more those (as for windows 2000) do not apply because they tell you to move files Windows has more, but it is a known problem and Microsoft should incorporate a simple way to add or remove accounts without uninstall/install programs just to be able to check a box... _ Perhaps there could even be an option for this in a very obvious place, as installed programs list of the filth or user account settings.

  Emzzey wrote:
  > Fundamentally, the problem is that I created another user account, but only a few
  > random applications appear on it and I was REALLY looking FORWARD to having to reinstall some
  > + 50 programs while my computer can run normally on my secondary account.
  > I am able to find a lot of programs installed by snooping around
  > Explore and have been able to run some by creating shortcuts, but a large number of
  > (Spybot, Itunes, Google Chrome, THE LIST GOES ON!) don't do nothing when the .exe
  endered useless (on this account).
  >
  >
  > Also, I want to say there is no page support for Windows 7, which deal with these
  > subject (that I could find using the search engine provided) and older
  > (as for windows 2000) do not apply because they tell you to move files that
  > Windows has more, but it's a known problem and Microsoft
  > should include an easy way to add/remove programs of accounts without
  > uninstall/install just to be able to check a box... _, may be
  > could even be an option for this in a very obvious place, like user account
  > settings or the bitch list installed programs!

  Any application that is properly designed to work on Windows 7
  either would give the person making the installation option to
  make the application available to all users, or do it automatically.
  by default. It is entirely the responsibility of an application
  programmers and out of Microsoft's control. Thus, the easiest way, of
  of course, is to use an application that is designed for a multi-user operating system.
  But, unfortunately, this is not always an option, where companies must rely on
  existing proprietary applications.

  If you install the legacy application places its shortcuts
  only in the start of the person performing the installation, all the
  You may need to do is to move these Start Menu entries to the same
  location in the C:\ProgramData\Microsoft\Windows\Start start\program
  folder and/or the C:\Users\Public\Public Desktop folder.

  In addition, such an incompatible application can offer additional
  "challenges:

  You may experience problems if the software has been designed to
  Win9x / Me, or if it was intended for Windows NT / 2 K/XP, Vista/Win7, but was
  poorly designed. Quite simply, the application 'knows' how
  manage individual user with different security permissions profiles
  e going to
  'banned' sections of the Windows registry or Windows protected
  system folders.

  For example, the saved data is often stored in a subfolder under the
  folder of the application in C:\Program Files - a place where it doesn't
  the inexperienced user or limited should never have write permissions.

  It may even be that the software requires 'write' access to the parties
  the registry or the files/folders to systems protected are not normally
  accessible to regular users. (He * didn't * happen if the application is)
  correctly written.) If this does not prove that that is the case, however, you
  often left with three options: either grant the required users
  privileges of senior access (either as users with power or local
  Administrators), explicitly grant privileges for normal users
  the relevant records and/or parts or the registry or replace the
  request by another who has been properly designed especially for
  WinNT / 2 K/XP/Vista/Win7.

  Some programs do not work if you connect limited account
  http://support.Microsoft.com/default.aspx?scid=KB; EN-US; q307091

  In addition, here are some tips suggested, in response to a
  another post, MS - MVP Kent W. England:

  "If your game or your application works with administrator accounts, but not with."
  limited accounts, you can set it to allow limited users to access to the
  folder Program files with 'change' ability rather than 'read' that
  is the default value.

  C:\>Cacls "Program Files\appfolder" /e /t /p user: c

  where "appfolder" is the folder where the application is installed.

  If you want to undo these changes, then run

  C:\>Cacls "Program Files\appfolder" /e /t /p user: r

  NOTE: On Win7 Icacls.exe gives more control.

  If you still have a problem with the delivery of the program or save the settings
  on limited accounts, you may need to change the permissions in the registry
  keys. Run regedit.exe and go to HKLM\Software\vendor\app, where
  the key of the Publisher of the software used to your own
  program. Change the permissions on this key to allow users full control. »

  --

  Bruce Chambers

  Help us help you:
  http://www.CatB.org/~ESR/FAQs/smart-questions.html

  http://support.Microsoft.com/default.aspx/KB/555375

  They who can give up liberty for a little temporary
  safety deserve neither liberty nor safety. ~ Benjamin Franklin

  A lot of people could die rather that thinking; in fact, most do. ~ Bertrand Russell

  The philosopher never killed the priests, while the priest was
  has killed a large number of philosophers.
  ~ Denis Diderot

• BlackBerry Smartphones Storm calendar event 'all day' views in 2 days

  Desktop Manager v 4.7.0.37

  Storm 9350 v 4.7.0.122

  My annual events to Outlook sync the storm through the Desktop Manager.

  However, an annual event (e.g. birthday) shows over 2 days.

  Example: Birthday of sam on Storm Watch:

  23 June:

  Sam's birthday, watch on 23 June wih alarm and repeat symbols

  Details of the opening shows: (open the occurance) "All day event" is checked

  Start June 23,

  End June 23,

  Duration 1 day.

  Time zone Eastern Time (even),

  Display as free time.

  Reminder 30 min

  24 June:

  shows all the details above with no change.

  Why does birthday again June 24 if the appointment ends on June 23?

  This behavior occurs consistently for all annual events.

  Best regards, Rick

  Thanks for the comments.

  It appears that the problem was that the information of the 2 versions of the calendar stored on the BB. One of the calendar versions had the question as previously mentioned on gle all-day event is not from 12 hours.

  Using the procedure from the thread on 'calendar since update problem '.

  (a) removed the CICAL for my email. Check that that a timetable "default device" remained

  http://www.BlackBerry.com/BTSC/search.do?cmd=displayKC&docType=kc&externalId=KB11703&sliceId=1&docTy...

  (b) synchronized single from Outlook to BB

  I now have a calendar and 'all day' events show once the correct day.

  Thank you for your help.

  Best regards, Rick

• My cloud application that you want to create is synchronization and synchronize all day long, but never ended up sync. What's wrong?

  My cloud application that you want to create is clock and clock and and play back, he will not cease. Now did for more than a week. It sync and sync all day long, but never finished sync. What's wrong? I only use 30% of the cloud to create!

  

  Use a browser that allows cookies and pop-up windows, please contact adobe for hourly pst support by clicking here and, when it is available, click "still need help," http://helpx.adobe.com/x-productkb/global/service-ccm.html

• My Photoshop and Dreamweaver is freezing up all day.  How can I reinstall again?

  My Photoshop and Dreamweaver is freezing up all day.  How can I reinstall again?

  Lets try the suggestion below:

  > Using native uninstaller to uninstall the application from the below sites:

  Win: Panel-> program & features

  Mac: Utilities-> Adobe installers folder

  > Download and install the Creative Suite from Adobe cleaner tool and remove the remains of the application.

  http://helpx.Adobe.com/Creative-Suite/KB/CS5-cleaner-tool-installation

  > Empty Temp folder:

  Win: Start-> Run-> %Temp%

  Mac: Go-> Go To Folder-> / tmp

  > Empty the Recycle Bin or trash.

  > Restart the computer and try to install the application.

• Update Verizon iPhone 5 new IOS 10 problem: cannot receive/send calls. Shop Verizon says it's an update causing Apple to popular phones to crash all day. Any input or advice, please?

  Update Verizon iPhone 5 new IOS 10 problem: I can't receive/send calls. The store Verizon says it's phones a popular causing update Apple crash all day. Any input or advice, please?

  Don't you say no service at the top?

• Is not harmful for your iPhone to stay all day plugged?

  I recently bought the Apple Smart box, and after a week of use, I was wondering if is not bad for your phone or even for the internal battery, in charge of all day or be connected every time?

  I know that all the products Apple has a guarantee of flawless quality and the Holster is designed by Apple for the iPhone, but I've heard tell that some people even had trouble with the lightning connector.

  Thank you

  Depending on how the new iPhone you have, it stops to load in full and only run on wired power until unplugged. So in addition to the normal battery use wear, leave it plugged should not harm him.

  Good luck

• my 6 phone fell in water for about one second, tried to dry all day still won't turn. What can I do? Help, please

  my iphone 6 fell into the water. won't turn on after that I dried it all day. What should do? Help, please

  As you tried to turn it on it was still wet, the damage is done now.

  Now, your only alternative is to call Apple and make an appointment to examine.

  They will probably suggest that you buy one out of warranty replacement for her.

• Pavilion g6-2306el: life of the battery and using the laptop all day

  Hello

  I tend to use the laptop for work almost all day. If this is the case, she recommends simply detach the battery, instead of always keep at full load (since it has plugged all the time)? Thank you.

  Modern laptop PC battery is smart. You don't do any damage in the battery while the laptop is running on current alternative. To some people say otherwise and there may be a very slight advantage in terms of reduction of charge cycles that are saved on the battery by deleting, but for me, the hassle of constantly take the battery now outweighs the very small gains.

• Why "Add or Remove Programs" lasts 2 days to fill?

  "Add or Remove Programs ' takes 2 + days to complete. Really. I tried most of the solutions found on the Internet, but nothing seems to work. Any help is appreciated. I use Windows XP Professional, version 2002. Service Pack3.     32-bit version operating system.

  You must first make sure that your system is clean:

  Download, install, update and scan with these full free malware detection programs:

  Malwarebytes (MMFA): http://malwarebytes.org/

  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/

  http://www.Microsoft.com/security/scanner/en-us/default.aspx Security Scanner   

  reply back with the results and more information:

  brand and model of the pc

  current antivirus

  Are only fully updated via Microsoft update?

• How to: Restore my back of laptop for buying condition, remove Google and all add ons

  Original title: Restore my back of laptop for buying condition, remove Google and all add ons

  Vista
  Inspiron 1525
  Centrino Inside
  Reference Dell
  Laptop
  2008
  Delete all the shortcuts, folders, data of the necessary United Nations
  system restore

  Hello

  As you ask here, you don't have a recovery disk.

  Here's how to access the Dell recovery hard disk partition and put your computer about how you bought.

  ATTENTION: All your data and programs that you have installed will be wiped from the drive hard as you do this. so back up your data. Programs will need to be reinstalled.

  http://support.Dell.com/support/topics/global.aspx/support/KCS/document?c=us&l=en&s=Gen&docid=DSN_336966&isLegacy=true

  See you soon.

• Windows Calendar all day event problems

  Windows Calendar has a default value of 12: 00 to 12: 00 on all the events of the day.   When I get the all-day event to say 05/02/2011 to 07/02/2011, it appears on the calendar itself as 05/02/2011 to 06/02/2011. So instead of being visible Saturday to Monday included, it shows that Saturday to Sunday - leaving white date Monday.   The only way that he will reveal on Monday, is if I change the date that is in fact the Tuesday 08/02/2011.  Is there a way to stop what is happening?

  Hello

  This is normal and you should send feedback if you wish, it changed in future versions of Windows:

  Check out the link:

  Windows 7 comments

  http://mymfe.Microsoft.com/Windows%207/feedback.aspx?formid=195

  Concerning

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• BitLocker is available in all versions of Vista

  BitLocker is available in all versions of Vista? Edit: Found it is only available in Vista and Win7 in the Ultimate and Enterprise editions.

  BitLocker is available in all versions of Vista? Edit: Found it is only available in Vista and Win7 in the Ultimate and Enterprise editions.

  Yes, you are right.

  BitLocker is available only in the enterprise and Ultimate from Windows Vista and Windows 7 editions. ^[1] users of other versions of Windows that do not include BitLocker could use a 3rd party encryption program. For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.