Remove the black paths

Similar Questions

• How can I remove the black of an image?

  How can I remove the black of an image?

  Al

  Hi albertreeder,

  Greetings!

  It will be helpful if you could post the image and let us know if you try to remove blacks or black background of the image. You can try the following steps.

  • Select your layer.
  • Choose layer > layer Style > blending Options. (from the menu bar)

  

  • . If you want to hide a black background, drag the slider to highest point.

  

  There are other methods too.

  • Select > color range.  Use the eyedropper tool to select the black of your image, bring the Blur slider to zero - which allows to select only the black pixels. Then, you can fill these pixels with a different color. Refer to select ranges of colors in Photoshop

  Kind regards

  Assani

• How to remove the black bars after image rotation

  I am very new to the use of first pro. I took a video with my smartphone like the contents of a project.  The original size is 1280 wide and 720high.  I imported the video and needed to rotate 90 degrees.   Instead of the scale I need tall. I imported and then under effects control - motion - rotation to rotate how I wanted.

  But now on the screen has black bars on the sides from the turn, and when I export the video basic settings is grayed out so I can't change it. It is game/set at 1280 x 720 with black bars.

  How can I remove the black side bars in first pro to fit the dimensions of the video shot recently?

  Great! I'm glad to hear it. Thank you for the presentation of reports. If you don't mind, please mark my answer as "Correct".

  The reason for which the clips were 56% was so that they would hold the frame of landscape size. Once they were they belonged, they were happy to 100%.

• Direct Selection tool removes the complete path

  Need to delete part of a path, but when I select the points I want to delete (or a line between two points) with the direct selection (not path selection) and click on 'remove' the full path of the deletions!

  This seems to be a new default value of CS5 on my copy.

  Any thoughts?

  Try it with a selected layer, otherwise it will remove the entire path

• Remove the black fill from the perimeter of raster symbol?

  Hello!  I have an image file of a symbol (attached) which includes a black border I want to remove.  Illy don't make a clipping mask - how can I cut/trim the black exterior far symbol yellow and blue?  End result, the PS will be export to emf for placement as a "symbol of the photo marker" in another program, so a white blanket is not an option.  Thank you!

  Simply draw a path around the perimeter of the symbol, select this option and the image and object > clipping mask > make.

• Removal of anchor point, removes the complete path

  Need a solution... when I create a path with the pen tool I'm unable to delete anchor points without deleting the full path. The tool using pen + option shows the white arrow (direct selection tool) - I click on and drag than a box around the desired anchor point - selected point is so black - all other points along the track are not filled with black - so they are not selected - I hit the delete button - instead of the single point selected being deleted the path is removed. In the past, I have to exit and restart PS to erase the problem - this patch no longer works.

  All of the suggestions. Thank you.

  CS4

  Mac 10.6.4

  4 GB OF RAM

  It is something that happens when you have no selected layers or over a selected layer. Make sure you have exactly a layer selected while trying to remove a single path point.

• BGP removing the best path

  Hello.

  I have a problem where the best path to a particular destination is removed by BGP.

  To explain.

  Site A has 2 links to site B. 1 via a peer eBGP on MPLS, 2 via an iBGP during a backup VPN peer.

  I configured the ebgp with a higher weight counterpart so that it is preferred.

  The problem is the following.

  When the ebgp peer link goes down, the connection via the ibgp peer is preferred.

  When the link via the ebgp peer returns to the top, the path of the ebgp peer doesn't come back in the BGP table (in fact it dates back to a second and is then removed).

  Could someone help me on this one.

  Thank you

  Lee

  It would go something like this:

  Country:

  router bgp 65500

  nearby MPLS map route setMed out

  setMed allowed 10 route map

  corresponds to the ip address 1

  set 2 med

  setMed allowed 20 route map

  med game 1

  permit access-list 1

  RtrC:

  router bgp 65500

  nearby MPLS map route setMed out

  setMed allowed 10 route map

  corresponds to the ip address 1

  set 2 med

  setMed allowed 20 route map

  med game 1

  permit access-list 1

  Let me know if you have any questions,

• Remove the black bars on the sides of the clip?

  Hello

  I am changing a clip in Prime Minister 11 elements. It is a file of 25 frames per second. I haven't shot the clip, but I was told that it was a normal life (not widescreen) video PAL. The clip looks like this when I'm editing (screenshot).

  What concerns me are the two thick black bars on both sides of the clip. What are the causes, please? What is the clip was really wide and I am editing in normal mode and the best way to remove because I imagine they will be visible when the final product is show on a DVD or TV.

  

  Thank you very much.

  Steve

  Steve

  Summary

  Thanks for the great information that points to how you create your video source.

  You seem to have no correspondence between the video properties and pre-defined description of the project and still have black borders.

  Solution: To scale the video in the box monitor Edit just at the point where the black borders have disappeared.

  Details

  If you have a PAL DV Standard or PAL hard drive Flash memory/Standard 48 kHz project screening and have

  an import of video files with properties, then you should not see black borders on the video screen, in the

  Change the monitor in the region.

  The only explanation I think is likely is that the person that you gave the video intentionally or not

  exported without the right scale, in the edit box, before exporting it.

  At this stage, then you the intensification of the video to remove black borders is the answer. Click on one of the handles

  the bounding box and make hanging them just to the point where the black borders have disappeared. Depending on the export destination

  more attention needs to be addressed with the dealer of securities video creation with regard to the safety limits for

  text.

  Please see the bulletin and review, and then let us know if what I suspect is likely.

  Thank you.

  RTA

• Remove the black bezel of the optical drive

  I have just been sent a drive optical repalcement (TS-L633N/HPMHF) of HP, and while I removed the old drive OK I can't see how to remove the bezel, the coverage of this (?) clips on the drive itself and includes the open/close button. Is someone can you please tell me how this comes off?

  The drive is for a HP Pavilion DV6-2113SA.

  Thank you...

  He does! Stupidity is, I thought that I could see what I had to do, but it turned out that I need a lot more force in order to release the clips that I was ready for, what with the fragile nature of the bar of the State etc.. Once I worked on how better to support the tray and found a suitable tool to apply pressure with the first clip was not too bad, the Middle easy but the last of them, I thought that would never open.

  Anyway, quite and I thank you for the links and tips!

• How can I remove the specific paths?

  I asked this question before, but in the other case, it was of two forms.

  This case, I've got various forms that overlap between them.

  How these forms of group and delete the specific paths in order to have only an outline (which is complete) left?

  Thank you!

  you mean each path in the perimeter of these form forms? "unite" in the pathfinder

• Remove the black borders on the EP 9

  Hello!

  First and foremost, I would like to say that I am very new to change the items first (or at all).

  Now, I'm having a problem with a video. I capture my videos off my screen using a program called Fraps. Once I finished editing the video, the preview looks perfect, so I click on the sharing option and transfer it to my YouTube account about PAL HD for YouTube 1920 x 1080.

  Then, when I load the video on YouTube, the video off a boring black border surrounding it.

  I have no idea how to solve this problem. I tried it get but I have not found anything very useful.

  If you need a more details please say so and I'll post them a response.

  Dealing with only the black bars and using pre, the best you can do is to choose a predefined project, with a size of image, close your FRAPS material, as is possible, and then use the fixed effect > Motion > scale to enlarge the images, to fill the size of the video image. Scaling UP slightly degrades the image, but there is no way around it.

  As your 1366 x 768 has an Aspect Ratio (1.78 vs. 1,777 - essence), very, very close to that of 1920 x 1080, which would be my choice. Your PAR (Pixel Aspect Ratio) will be NOMINAL = 1.0, or Pixels square, so it will be what you want too. You might lose a few pixels on a side, but not such that would never notice.

  PrE is designed to work with standard video frame sizes and offers no way to create a custom size, as does PrPro, so you are limited to only standard sizes.

  For some tips on FRAPS and other programs video screen-cap, this older article may have some useful info. Note: much of the discussion IS for PrPro and not before, so there are some limitations in mind: http://forums.adobe.com/message/4461642#4461642

  Good luck

  Hunt

• How can I remove the black lines that prints when I use my ADF?

  When I use my ADF my copies have 2 black lines going down the middle.  How can I remove them?

  OK, the 8600 Officejet Pro has two pieces of glass used for copying, the glass of the main copy, and a thin (~ 1 "wide) section of glass on the left side.  If there are black lines vertical on copies or analyses both flat glass and ADF, and then the question would be caused by a defect in the sensor scanning.  The most likely hypothesis is that copies of the scanner glass flat are OK but there is a vertical line on the pages sent through the ADF.  This is caused by a small spot, perhaps as small dust on the cutting Strip.  Holding a strong flashlight on the front of the unit to the position just above the t in the logo HP Officejet Pro on the front will highlight the region.

• How can I remove the black space between the title and the main section of the screen?

  Hello

  I'm a black space between the title and the main screen. I don't want this space.

  How can I remove this space?

  Please help as soon as possible?

  http://www.BlackBerry.com/knowledgecenterpublic/livelink.exe/fetch/2000/348583/800332/800505/800508/...

• How to remove the full paths in the form

  Hello!

  I'm new to illustrator but I saw these files on fotolia.com, I wanted to create this type of design, but I wanted to know the way how to remove paths to complete the form or just the anchor points

  

  In this context, a shape like spiral is created, but how the designer shaped. All circles are full. This form is not created just by creating the spiral shape and then creating clipping masks because all the circles are full. Is there any script or not in illustrator, I could do that.

  Any help would be appreciated. Thank you.

  Usually, I'm a big fan of doing the thing using only appearances, but in this case, I'd go with an approach of several paths:

  

  

  So have several brushes applied to some of the paths

  

  Who should multiply, I forgot in the example.

  The brush is so much like

  

• Remove the black

  I am trying to remove black from this sample image, but replace the color does not work as I hope; any suggestions?

  

  Try one of the technical choices:

  for example:

  Select-> color range