Rename the first alias

Similar Questions

• Cannot rename the video tracks in first CC?

  Most of my projects consists of 40-50 video tracks, so rename the video tracks are most important.  Whenever I try to rename a video track, it is grayed out, but can I rename audio tracks without problem.

  Any help will be appreciated, thanks!

  Nevermind, I figured it, I just had to increase the size of the track to see the name.

• Cannot use the network after the first time backup volume machine

  Hello

  After the update to OS 10.11.4 my MACs are unable to use the network backup volume more.

  The volume of time machine is a device (RAID of LCM InXtron Taurus-S) external USB connected to a server of iMac (also running OS 10.11.4). Four MACs use this device as a backup time volume machine (all systems 10.11.4).

  What I've done so far has been clear the volume (twice) and rename with different names than in the past. Than I started the new backups for all of my MACs. The fist backup works fine for all machines. After it says, that the first backup is over, and he tries to perform the second backup an hour later, it is said that the volume does not support the necessary functions of AFP.

  I am still able to connect to the volume via afp: / /... If the finder (go to). As long as I use the volume for a single machine works. If I announce a backup from another machine, it evokes this error.

  Any suggestions?

  Thanks in advance.

  These must be run as administrator. If you have only one user account, you are the administrator.

  Please launch the Console application in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  The title of the Console window should be all Messages. If it isn't, select

  SYSTEM LOG QUERIES ▹ all Messages

  in the list of logs on the left. If you don't see this list, select

  List of newspapers seen ▹ display

  in the menu at the top of the screen bar.

  In the upper right corner of the Console window, there is a search box to filter. Enter the 'Start-up' (without the quotes). You should now see messages in the log with the words "departure * backup," where * represents one of the words "automatic", "manual" or "standard".

  Each message in the journal begins with the date and time when it was entered. Note the time stamp of the last 'Start' message that matches the start of a normal backup. Now

  DELETE THE WORD 'Start' TO THE TEXT BOX

  so that all messages are showing and highlight the newspaper at the same time, you noted. Select the time-stamped messages since then until the end of the backup or the end of the log if it is not clear. Copy to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

  If all you see are messages that contain the word 'Start-up', you clear the text field.

  The journal contains a large amount of information, almost everything that is not relevant to solve a particular problem. When you post a journal excerpt, be selective. Don't post any more it is requested.

  Please don't dump blindly thousands of lines in the journal in this discussion.

  Please do not post screenshots of log messages - text poster.

  Some private information, such as your name, may appear in the log. Anonymize before posting.

  When you post the journal excerpt, an error message may appear on the web page: "you include content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

• How to rename the external HARD disk

  Hello

  I use 2 recorders hard drive to my TV, one for Timeshift and record live and 1 to put music, photos and movies on it.

  When I need to shut the drive down to put more music or movies about it, I need to select the one that I'll save close.

  The problem is I can not rename those or put another top icon to see the witch disc I have to choose.
  Even if I rename the drive on the pc the principal name is always toshiba HDD.

  I hope you know what I mean because I worry about losing data or damaging the drive to not close corectly

  Hmm not very well if this would work but try to format the USB stick memory first

  Before the USB flash memory stick should be formatted, you may be able to modify the system files and the name of the device.

• Rename the playlist

  The Genius on my I pod playlist is named after the first song (why I don't know), if I try to rename and double-click on in the column on the right, all I get is; Room, shuffle, playnext, add up, and so on, but not edit box or rename as I don't know it once was, it is with the I pod connected to my MacBook. Thanks for any help.

  You should be able to second-click (do not double-click) name of the Playlist to highlight in blue, then just type the new name, which will replace the old.

  At the second click, highlight the title with a single click, then simply click on the title a second time, leaving a small delay between the two clicks.

  Note: a double-click is to click twice quickly. Although this (should) will highlight the title in blue (which allows you to type too), it will also start operation of the Playlist, which will not be a second 'click '.

• MAX does not allow me to rename the tektronix oscilloscope

  Hi, I'm trying to set up my TDS 2014 C Tektronix oscilloscope, but I have a few questions:

  (1) I can't rename the Max machine (I have installed TekVisa).  Here is what I get (see the file attached jpg).  So, what happens here?

  (2) my scope is connected via USB and MAX sees, but all examples are for serial communication and I see no VI to the USB, but when you download the instrument driver, it said USB-compatible.  What should I do to get the examples running for USB?

  Thanks in advance...

  First of all, there is no reason Tek-visa application must be installed. You just need to NI-VISA, especially if you plan on using LabVIEW, secondly, how weak is slow? Seconds, minutes? What command do you send to MAX? Third, your scope is a USBTMC device and is listed as such. There is no specific to USB example since one is not necessary. The same code works for the GPIB, series, or USB. Ignore you the control of parameters series.

• Cannot use fax function after rename the name of the printer

  I have an MFP HP LaserJet M1536DNF connected by network.  I have run the full setup package by the CD of the product, or on the web, complete update install the driver package.  The problem is the default printer name after installation as like "HP LaserJet 1530 MPF Series PCL 6" and can not be changed through the installation.  When I tried to change the printer name on the windows 'Printers and faxes', he managed but the fax doesn't work anymore after that.  It says probably 'impossible to find or connect the printer' after I click the fax or print the document to the fax printer.  However, I can still use the printing function after the name change.  The only way to solve now is to uninstall all and reinstall again, even I tried to rename back the name exactly for the name of the printer.  I use Window XP Pro SP3 with .net Framework 3.5 already up-to-date.  Thanks for the tips.

  Hi Cheetah12,

  Sorry to misunderstand.  I mean there is no option to not rename the printer when you run the complete package installation wizardfirst, but not the fax configuration wizard.

  In fact, I must mention once again that I have can print and scan even I renamed the printer.  Things I can't do the HP Send Fax or fax HP Setup Assistant and so, which means my fax machine was not working properly.

  Therefore, I follow the document from HP that you post step by step and of course the diagnosis by downloaded HP Print result and doctor Scan for both printing and scanning are in good health, all in green light!  But cannot always solve the problem of the fax.

  However, I finally found my way to solve the problem, which is just rename back the original printer name in the registry.  As a result, the printer in "Printers and faxes" which always shows the famous name, but actually running with the original name of the printer.

  In any case, thank you for your kindly help and fast track.  But I suggest there should be a direct way, like having an option to rename the name of the printer while the first installation wizard on your next updated version.  This will certainly help users who have to install 2 or more of the same model printer, to indicate which printer works easily.

• I've renamed the images in a file and now they are all out of control, how to make their return to the original order

  I opened a drive with my camera phone, then renamed the photos with brief descriptions, and now they are all out of order. How to make back in the original order they appeared.

  Dennis

  Renamed files are apparently to be sorted by alphabetical order.
  It is the normal behavior of Windows.

  If you open the folder in question and go to... View / details... and
  Select the column that says: "Date picture taken", she should use
  photos.

  Also you can drag and drop photos to change position.

  Once you have pictures in the order you need... you can re-
  Number them in a batch to maintain order.

  Just go to... Edition / select all... right click on the first file name and choose...
  Rename... Enter the next number...

  .jpg (10001)

  Press Enter and the remaining files will be named in the order.

  You can also add a word if you want to identify the group.

  Summer vacation (10001) .jpg
  (Yes, there is a space between the letter n and the first parenthesis)

• Windows didn't start because the following file is missing or corrupt: __\WINDOWS\SYSTEM32\CONFIG\SYSTEM___YOU CAN ATTEMPT to REPAIR THIS FILE BY STARTING WINDOWS SETUP using THE ORIGINAL SETUP CD - ROM__SELECT 'r' in the first screen to start repair

  This problem is on my laptop and I can not further only the screen with the above opinion.  I don't have the original disc, since I received the laptop of my mother when she could no longer remember how to use it. I need a repair of xp, or all that it can be called and information how to fix this problem is driving nuts me to have a laptop that is faulty... Please help me.

  This problem happens almost daily.

  You can search the forums for discussions with similar problems (or the same problem) and peruse the threads where the result is a happy ending and examine everything first using these methods.  This will reduce the time to resolution and frustration.

  Something like this example:

  http://social.answers.Microsoft.com/forums/en-us/XPRepair/thread/83d5c57f-9836-4f3a-bec8-04c7d81861d3/

  The question was preceded by a loss of power, aborted reboot or abnormal termination? (this includes pulling and buttons power)

  These can cause corruption in the file system that must be fixed before you do anything else.

  If none of these events occurred (or even if they have not taken place), you must verify the integrity of your file system before anything else (especially "try" things).

  Use the XP Recovery Console to check the file system on your HARD drive and fix the problems and then try to start your system - this may be all you need to do.  Or, you are welcome to just start trying things that might work.

  Boot into the Recovery Console Windows using an XP bootable installation CD.

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget.

  This is not the same as recovery disks that may have come to a store to purchase the system.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  xp_rec_con. ISO

  Download the ISO from here:

  http://www.mediafire.com/?ueyyzfymmig

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:

  http://www.ImgBurn.com/

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the command prompt.

  Start by checking the integrity of your file system by using the chkdsk command.

  In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.

  Running chkdsk is fine, even if he finds no problem.  It won't hurt anything to run it.

  Assuming your boot drive is C, run the following command:

  CHKDSK C: /r

  Let chkdsk finish to correct the problems, he could find.  It may take a long time for chkdsk complete or they seem to be "stuck".  Be patient.  If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

  You must run chkdsk/r again until it finds no error to correct.

  Remove the CD, and then type "exit" to exit the RC and restart the computer.

  You have not to set the BIOS to boot the disk HARD since the CD won't be.

  Do not guess what the problem might be - understand and resolve it. I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!

• Rename the titles burned to cd audio with windows media player

  Hello

  I just burned a few audio songs (downloaded on the internet) on an audio CD, using the installation of 'Burn' of Windows Media Player. The songs on my PC contain all the information, including the title of the track. However, after burning, the tracks on the audio CD appear as "Track 1", "Track 2" and so on. I tried to rename the tracks first on the audio CD, which was not possible.  Then I copied the tracks from the audio CD in a folder on my PC, renamed them here, but when I tried to copy or burn back on the audio CD, the impossible reputation copied or written to the audio CD tracks.  Could you let me know how can I rename the tracks so that the title of the correct range is displayed on the audio CD?

  Thank you

  Anyway thanks, learned a little about WMP in the process!

• Rename the songs in Media Player 11

  Does anyone know how to rename all the songs in my library? At the present time, they are a mixture of "Song title", "Artist - song title" and "artist - title song - Album". Because I have the same songs from different albums, I want to be able to rename all my songs as "song title - Album". I put my RIP titles in this format but I have more 3 500 songs and no way to pull them UP everything again. Any suggestions will be greatly appreciated.

  Hi EsieB,

  Thanks for posting on the Microsoft answers Forums.

  The research we did we do not believe there is a way to rename all the songs in your playlist at any given time.

  Name and store titles

  If you have an Internet connection, Windows Media Player will automatically connect to the database of Windows Media online and get all the information are available on the CD. If it cannot connect to the internet, the titles will be saved with that unknown information, and you will not be able to know who is who.

  You can avoid this by manually adding the necessary information before starting the extraction. Right-click on the corresponding columns and select Edit to change the information. You can select what information to be provided by the files by clicking on the arrow below Rip, selecting more Options, then press the button of file name.

  The files are saved by default in the folder music of the current user. If you want to save in a different location, click the arrow below Rip, select other Options, click Edit and select the desired path.

  Rename already extracted files

  If you have some ripped albums that do not have the correct information, you can have Windows Media Player rename them. Click the arrow below the play button and select other Options. Go to the Library tab and check rename music files using parameters of music and rip the music to reorganize in rip music folder, using rip music settings. The first option renames the files by using the file name Options settings, and the other creates new folders using the retrieved information from windowsmedia.com.

  Please post back and let us know if this information helped answer your question at all, or if you are always need more help.

  Robyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error 0x8007000D try to move and rename the file

  Hi, I'm Ayu. I have problem when you try to move the folder and rename the folder, error 0x8007000D: these data are incorrect, still stood. Someone help me please.

  Thank you

  Hello

  The most likely cause is a 3rd party antivirus/security program or some sort of system optimizer
  (these are all snake oil). If using a 3rd party antivirus uninstall completely and use MSE - free.

  List of tools to clean/uninstall anti-malware programs
  http://answers.Microsoft.com/en-us/protect/wiki/MSE-protect_start/list-of-anti-malware-product-removal-tools/2bcb53f7-7ab4-4EF9-ab3a-6aebfa322f75

  Uninstallers (removal tools) for common antivirus software
  http://KB.eset.com/esetkb/index?page=content&ID=SOLN146

  MSE - free
  http://Windows.Microsoft.com/en-us/Windows/Security-Essentials-download

  ================================================

  All the methods in this article may apply

  Error: Windows Explorer has stopped working
  http://support.Microsoft.com/kb/2694911

  Follow these steps:

  Try these to erase corruption and missing/damaged file system repair or replacement.

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to analyze the log file entries that the Microsoft Windows Resource Checker
  (SFC.exe) program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows
  Vista or Windows 7
  http://support.Microsoft.com/kb/929135

  Use advanced tools to solve performance problems in Windows 7
  http://www.howtogeek.com/HOWTO/6152/use-advanced-tools-to-troubleshoot-performance-problems-in-Windows-7/

  ==================

  If nothing else work (and you should try all the above first) then make a new account. Switch
  and see if it works there. If so, you will need to migrate to the new.

  Difficulty of a corrupted user profile
  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Rename the Service profile after creating through model

  Hello

  first... I found a discussion earlier, but from 2010, so he's changed a lot. At that time, it was scheduled for a future implementation

  Creating profiles of server through service templatesalways adds a number (based on how to generate profiles).

  But I don't need this number. We have a nameconvention for servers on ends with a zero (such as abcd9000).

  So, how can I use the models without numbers (leaving blank does not work) .or how can I change the name of the new profile service?

  We run on the 1.4(3q) Version.

  Concerning

  Silvio

  Currently, it is not possible to rename the objects. What you can do here, use the creation of a Clone function that is available when you click on a Service profile existing (SP). This gives you the opportunity to choose a new name altogether and the location of the SP.a cloned. It is very useful if you use address pools in the SP master because the cloned SP automatically borrows a same pool addresses. If you're bored after clicking on create a Clone of 30 times, it's something that you can easily automate with the power of the UCS Toolkit (unit Powershell cmdlets 1300 +).

• How do I rename the user_000 folder in Windows 8

  Hi all

  Today, I got a new laptop with windows 8.
  I had signed up for a Microsoft account earlier, so I typed that in when setting up my laptop for the first time.

  Unfortunately, the default seems to be that the user folder is created in this format:

  C:\Users\User _000 where 'user' is my first name, lowercase. I wish I had the format of C:\Users\Account. where 'Account' would be my full name with a space between the two and capitalized letters.
  Anyone know a simple way to change this?

  If you can't pass on your account offline I can do when I slide to the left and then click users.

  The reason for which you need an online account is due to access to the Windows store I'm curious to know why you want to change the profile for you were not able to access your Vaio applications or is it out of curiosity.
  No doubt a reason, it was size 000 to differentiate themselves from your local account you mind, I'm just speculating.
  I believe you can change your username under settings and also you can have an account offline.
  If you explain why perhaps someone with more knowledge of the question can help you!
  This operating system is no longer uses an interface to command line icon of hybrid it's supposed to be easier and your decision-making of that complex.
  Here, this tutorial will show you how to change name and add profiles using the interface emblematic it's really easy
  http://www.technoon.com/how-todelete-or-rename-user-profiles-in-Windows-8.html

• Play and rename the clip in the project Panel, using only the keyboard

  I want to use my keyboard to navigate through the items displayed in the thumbnail view in the Panel project (pictured below), play these clips and rename these clips. Already, I am able to up, down, left, right keys to navigate and can press ENTER to rename the clip. However, the space bar does not play the selected clip unless I use my mouse to click on it.

  

  I really want to avoid using my mouse in this process. This will greatly enhance the convenience of crosses a lot of clips and visualizing and renamed.

  Someone at - it suggestions? Open to workarounds or other ways to skin this cat.

  It is a problem I always had with first - I think that it is not a solution, but I wanted to ask the community to see if someone has found a way.

  Using Mac OS X 10.10, latest version of first CC

  Hey mammolastan,

  I don't think there is a way to play a clip with Sapcebar in the project without first Panel by clicking on it. You should have a demand: feature request/Bug Report Form

  There is a work around using only keyboard shortcuts, if you are interested. I prefer this workflow myself because you have to make the thumbnails big enough so that they can be useful, in my opinion.

  If you have already said, you can navigate with the arrow keys, press ENTER to return to rename and move to another clip or enter on the numeric keypad to not go to the next clip. When I do what you, I open my clips in the Source monitor and view them there, air conditioned and have no mice. SHIFT + O is the default shortcut to open an item in the Source monitor, but I've changed mine to Cmd + down arrow (as OS X). Then you can shuttle, set in/out points, make markers, etc., and then when you go to your next video you press SHIFT + 1 to return to your project Panel. It's more shortcuts, Yes, but given that you are looking for a KB option-driven, I feel you're fast enough with your fingers, and once you do it a few times, it is true no big thing at all.