Rename the incoming replica set

Similar Questions

• Portege R500 - configure the parser on the Port Replicator

  The system is Portege R500 with a port replicator Port MS Vista running. Port replicator has a Philips 19 "LCD monitor

  System has BEEN configured so that when the system was in the duplicator monitor 19 "inches would be active and system monitor is inactive.

  But, a few days before the following events occur, when the system is in the port replicator and its turned on screen (the one with the mobile progress indicator) Windows startup is displayed on the Port Replicator monitor, then the screen turns white and displays them on the screen on the monitor system, after entering the desktop on the monitor system.

  I live in a remote area, so I can't pop in the store of the local computer to ask for help.

  I would appreciate someone to give me some guidance as to where it configures the port replicator monitor configuration. I looked at the section Configuration screen Control Panel but it seems to be the performance of two monitors, it appears not to address the peculiarities of a laptop computer with a port replicator configuration

  Thank you

  Hello

  I have no Portege R500 but I ve used external monitor connected to my Tecra duplicator.
  Can you please tell me how you have configured previously?

  What is your external monitor set as primary monitor?

• Portege M400: Display appears on the side to the Port Replicator

  Hi all

  M400 laptop when starting at the port replicator will display the screen on the side. I must then, open the laptop screen and set the display in normal mode. When I'm correct display turn the laptop off and back on the display appears again on the side... Turning on a laptop without port replicator, portable computers the display is correct. What is going on. How to set the default display when in normal port replicator?

  Thank you

  These sound like the laptop would turn to Tablet mode after connection to the raplicator port.
  I think it has a bad setting in the utility of rotation.
  You must enter this utility and check the PC mode and the Tablet PC settings.
  I think that the parameters must be defined on primary landscape

  In addition, I would recommend checking the Toshiba mobile extension tool that is placed in the control panel.
  There is a tab to display change. Here you can activate the service of display change

• Re: Tecra A10 - USB problem on the port replicator

  I have a Tecra A10 and sometimes, when I work with her, the devices USB stopped responding if they are connected to the port replicator.
  If I connect them to the laptop, they work fine.

  I tried to update the BIOS but now when I turn on the laptop it freezes when Toshiba red letters are displayed on the screen. I can work with the laptop properly deattached starting from port replicator.

  Have you tried to load the default settings in the BIOS after the update?

  If you have external devices connected to the laptop they remove and try again in the duplicator.
  Maybe you should also update your laptop chip set driver. You can find them on the Toshiba site.

• MAX does not allow me to rename the tektronix oscilloscope

  Hi, I'm trying to set up my TDS 2014 C Tektronix oscilloscope, but I have a few questions:

  (1) I can't rename the Max machine (I have installed TekVisa).  Here is what I get (see the file attached jpg).  So, what happens here?

  (2) my scope is connected via USB and MAX sees, but all examples are for serial communication and I see no VI to the USB, but when you download the instrument driver, it said USB-compatible.  What should I do to get the examples running for USB?

  Thanks in advance...

  First of all, there is no reason Tek-visa application must be installed. You just need to NI-VISA, especially if you plan on using LabVIEW, secondly, how weak is slow? Seconds, minutes? What command do you send to MAX? Third, your scope is a USBTMC device and is listed as such. There is no specific to USB example since one is not necessary. The same code works for the GPIB, series, or USB. Ignore you the control of parameters series.

• Problem with the tag 'Bld_localDestDir' setting before generation VI: project gets registered in previous localDestDir.

  Hey all,.

  I write a VI before generation that updates the destination of the building (and other elements, but we are ignoring those which for the moment). This pre-generation vi, when it is running, enters the Destination of the tag "Bld_localDestDir" directory and modifies the directory by incrementing a version number.

  The issue I'm having is that after the pre-build vi is executed, the construction continues and the executable file in the * previous * Destination directory instead of the update.

  Example:

  Destination dir = c:\temp\version1 --> choose to build the executable--> VI pre-build runs and sets of Destination Dir to c:\temp\version2 --> Build over and said 'You can locate the building to C:\temp\version1'--> check the build properties, destination dir is C:\temp\version2 --> build again--> pre-build runs and destination updates to version 3 --> Build finishes and says 'you can locate the building to C:\temp\version2'--> generation of recording properties destination dir is C:\temp\version3

  And so on and so forth. As you can see, the setting of the tag works (as evidenced by the properties build updated). However, it seems that the destination directory for the generation that is determined and set * before * the prior generation VI is managed. In my opinion, this is not expected behavior.

  Here is an excerpt of a watered-down version of the code, which still has the issue. I've also attached the full VI, saved to LV2010.

  

  The attached VI will enter the version number of the build, add to the title bar of the start vi, update the destinations to build a new path that has the version number, and then save the project.

  As a final note, I would prefer not to use a post-build VI to rename the directory in the build.

  It is not recommended to use this approach to change the settings of the Application Builder. While the code of the app Builder uses the values in the tags, it potentially treats information and so simple updating of the values may not the desired effect.

  The steps in pre/Post build that we intended to allow users to run code before and after their own processing code or perform actions not conducted by Application Builder (i.e. control source files before generating or move files to a destination of export). Any attempt to change the configuration settings after the construction began, once again, is not recommended and (as you have seen) may cause unexpected behavior.

• Cannot create or rename the new folders, cut and paste to a different destination

  Whenever I try to create a new folder it tells me that the file or folder does not exist when I cut paste in different folder does nothing so I have to drag-and - drop in different areas of my laptop to get the file where I want it to be.
  My OS is vista please anything you can do I appreciate it thanks

  Hello Young Ceaser,

  Thank you for using the Microsoft Windows Vista Forums.

  Have you always had this problem with the creation of a new folder?  When you try to create that file to?  Please let us know status.  Thank you!

  I'd like to experience for me to better understand the potential cause for what you are experiencing.

  What we will do is create a new folder in your user profile directory and test the availability of renaming.

  We also create a folder on your desktop and attempt to appropriate to see if we can then rename it.

  Here are the steps to do this:

  Click Start-> click on your username at the top right of the menu.

  In the new window, click on organize-> then new folder

  Check your ability to rename.

  From there, double-click the desktop folder.

  Take the same steps to create a new folder, test the name change.

  Then, on an issue that you cannot rename, test this procedure:

  To take ownership of a folder:

  Right-click the folder for which you want to set permissions, click Properties and then click the Security tab.

  Click Advanced to open the security settings advanced for the dialog box

• Rename the folder to the user files

  In Vista, I can't rename a folder of the user.  This computer used to be used by someone else, and I can't rename the folder so everything I do Gets the tag with his name on it.  I changed the name of the computer and log in name.  Can I change any other user except this one folder.  Any ideas how to rename this folder?

  It sounds like a problem with permissions for me (he does not resemble a corrupted profile) - you try to use its files under your user name and the system wants as his user name.  The solution is to give your full user name to all records in his profile and then to take possession of all the files in the profile - then you will have the rights you need.

  To view your permissions, right-click on the file/folder, click Properties, and check the Security tab.  Check the permissions you have by clicking on your user name (or group of users).  Here are the types of permissions, you may have: http://windows.microsoft.com/en-US/windows-vista/What-are-permissions.  You must be an administrator or owner to change the permissions (and sometimes, being an administrator or even an owner is not sufficient - there are ways to block access (even if a smart administrator knows these ways and can move them - but usually should not because they did not have access, usually for a very good reason).)  Here's how to change the permissions of folder under Vista: http://www.online-tech-tips.com/windows-vista/set-file-folder-permissions-vista/.  To add take and the issuance of right of permissions and ownership in the right click menu (which will make it faster to get once it is configured), see the following article: http://www.mydigitallife.info/2009/05/21/take-and-grant-full-control-permissions-and-ownership-in-windows-7-or-vista-right-click-menu/.

  To resolve this problem with folders, appropriating the files or the drive (as an administrator) and give you all the rights.  Right-click on the folder/drive, click Properties, click the Security tab and click on advanced and then click the owner tab.  Click on edit, and then click the name of the person you want to give to the property (you may need to add if it is not there--or maybe yourself). If you want that it applies to subfolders and files in this folder/drive, then check the box to replace the owner of subcontainers and objects, and click OK.  Back and now there is a new owner for files and folders/player who can change the required permissions.  You can change now switched to read-only (even if the main folder indicates that they are always read-only - you can access yourself as the owner).  You can keep them in read-only to other users, customers and administrators even (although they can support themselves and access, if they wish, and it is really not that you can do to stop it except protect the file with a password by using a 3rd party product).  This should also give you access to open and work with all of the files in these filders, as if they were in your file.  Here is more information on the ownership of a file or a folder: http://www.vistax64.com/tutorials/67717-take-ownership-file.html.  To add take ownership in the menu of the right click (which will make it faster to get once it is configured), see the following article: http://www.howtogeek.com/howto/windows-vista/add-take-ownership-to-explorer-right-click-menu-in-vista/.

  You can also create a folder in your profile named username of the other person and move the files in this folder.  He needs to pick up the permissions and attributes of the new folder (YOUR user profile folder) and you won't need to go to his profile whenever you want to get one of his records.  You may still need to change the permissions and/or ownership if you do this - it would be just to make things easier and quicker to access.

  Good luck and I hope this helps!

  Lorien - MCSA/MCSE/network + / A +.

• Easy question: router WRT54G: how to rename the user and give a new password?

  Not very computer, but following the recommendations in the FAQ, I have reset my WRT54G router to the default settings by hitting the reset buttong and entering into the Web site. I got a new computer and I forgot the old password. After reset to defaults now the link is not secure. How can I go about renaming the user and giving it a new password of my own - it was a while that I have configured the router, and I don't have the CD. Any help that you can offer or the direction you can piont me is appreciated.

  Try to proceed as following:

  Open an Internet Explorer browser on your computer (desktop) wired page. In the address bar type - 192.168.1.1 and press ENTER... Let the empty user name & password use admin lowercase...

  For wireless settings, follow these steps: -.
  Click on the Wireless tab
  -Wireless network mode must be mixed...
  -Provide a unique name in the name box of the wireless network (SSID) in order to differentiate your network from your network of neighbors...
  -Set the channel 11-2 wireless, 462 GHz... Wireless SSID broadcast should be enabled and then click on save settings...
  Please take note of the name of the wireless network (SSID) because it's the network identifier...

  For wireless security: -.
  Click the sub-tab under wireless > Wireless Security...
  Change the mode of WEP wireless security, encryption must be 64-bit. Let the empty password, do not type in anything... Under type of WEP Key 1 in all 10 numbers please (numbers only and no mailbox for example: your 10-digit phone number) and click on save settings...
  Please note the 1 WEP key as it comes to the security key for the wireless network...

  Click the settings advanced wireless
  Change the interval of tag to 75 > change the Fragmentation threshold to 2304, change the RTS threshold to 2304 > click 'save settings '...
  Now let's see if you can locate your wireless network and try to connect...

• Change the incoming mail server?

  My company uses a hosted e-mail service, and I've not found a way to change the incoming mail server, if I can use SSL (criticism for unreliable wifi!).  The SSL certificate raises an error to me every time, and I am sure because "mail.domain.com" eventually returned a real certificate for the actual host name.

  I managed to change the outgoing server, but if it is not possible to change the incoming server, it is a major part of Palm oversight and should be corrected immediately.  This phone cannot be taken seriously for a user in a company without it.

  Someone at - it information that I'm missing?

  Thank you

  Try this.

  1 delete the account if you already have it in place
  2. click on add account
  3. in the box enter your address and email password screen select the menu (top left corner)
  4. click on manual set up
  5. change of pop to EAS
  6. 3rd field down is incoming mail server

• X 301 has no sound when connected to the port replicator

  Hello

  We have a x 301 with a port replicator 45 k model 2777-cto 1610.

  We first had the problem with the blue screen and not SA of lenovo or IBM might help. I found the solution here.

  No, I have a new problem. When the port replicator is connected, there is no sound on the computer? Once the port replicator is unplugged, the sound works well?

  Any ideas or advice will be appreciated.

  Eugene

  When you connect to the rep of the port, the audio should be routed to the audio port on the default port rep, not your system. There should be a setting via icon taskbar for rep port driver that returns the audio to make of her.

• After you rename the computer, the backup of the file history still showing the old name of the computer to its destination.

  Original title: history of Falie Worng Destination path

  I changed my computer name [my computer setting and the name, display name, computer and computer Description all equal under the same name]. But when the history of files backing up my files, he insists on putting the OLD computer name in the backup destination path, for example:

  Backup_Drive\\Backup_Folder_A\UserID\Old_Computer_Name\Data...

  I tried selecting a new backup drive and reboot several times, but the history of files always comes back to the old name of the computer when you create the destination path.

  How can I fix?

  Similar to the response of Siva here, you will want to return to

  C:\Users\\AppData\Local\Microsoft\Windows\FileHistory

  Now, if FileHistory was lit before, using the old username, there will be a configuration file and the Config1.xml and Config2.xml files will contain several tags using the old name of PC. Rather than wipe these files, open each file in Notepad and search for the name of your old PC and replace with the name of the new, do not forget to save.

  In addition, if you want to keep a backup that has already been created with the old name of PC, you'll need to find, rename the main folder ("old name PC") and in this folder, rename tags in the Web configuration files (as you did in the local configuration files).

  When I tried to delete my local config files, he would recreate using files of configuration of the backup, that were also incorrect, so I just manually renamed and mine works fine now under the new name of PC.

• Calculation fail with (impossible to rename the outbound log file)

  Hello

  I am running a calculation script that breaks down after running for some time. I see that the problem comes from the entity dimension that has something of 4,000 members. My calc calculation script only a subset of this dimension.   I do see messages of any detail just the message log applications which ends with failure to rename the log file, exit below.

  Impossible to rename the outbound log file [Wed Oct 21 11:25:26 2015]...

  Calculator Information message: run block - [No_Activity], [Deg - 47], [No_Location], [2870], [No_Academic], [D801200], [original], [FY15], [CAD], [F9plus3]

  Cannot rename the outbound log file

  Looks like you are running with SET MSG DETAIL, is that correct?

  Has the potential to create a lot of log entries. Just a guess but you run out of space in your/diagnostics/logs folder?

• Play and rename the clip in the project Panel, using only the keyboard

  I want to use my keyboard to navigate through the items displayed in the thumbnail view in the Panel project (pictured below), play these clips and rename these clips. Already, I am able to up, down, left, right keys to navigate and can press ENTER to rename the clip. However, the space bar does not play the selected clip unless I use my mouse to click on it.

  

  I really want to avoid using my mouse in this process. This will greatly enhance the convenience of crosses a lot of clips and visualizing and renamed.

  Someone at - it suggestions? Open to workarounds or other ways to skin this cat.

  It is a problem I always had with first - I think that it is not a solution, but I wanted to ask the community to see if someone has found a way.

  Using Mac OS X 10.10, latest version of first CC

  Hey mammolastan,

  I don't think there is a way to play a clip with Sapcebar in the project without first Panel by clicking on it. You should have a demand: feature request/Bug Report Form

  There is a work around using only keyboard shortcuts, if you are interested. I prefer this workflow myself because you have to make the thumbnails big enough so that they can be useful, in my opinion.

  If you have already said, you can navigate with the arrow keys, press ENTER to return to rename and move to another clip or enter on the numeric keypad to not go to the next clip. When I do what you, I open my clips in the Source monitor and view them there, air conditioned and have no mice. SHIFT + O is the default shortcut to open an item in the Source monitor, but I've changed mine to Cmd + down arrow (as OS X). Then you can shuttle, set in/out points, make markers, etc., and then when you go to your next video you press SHIFT + 1 to return to your project Panel. It's more shortcuts, Yes, but given that you are looking for a KB option-driven, I feel you're fast enough with your fingers, and once you do it a few times, it is true no big thing at all.

• How to rename the FDM 11.1.2.1 application?

  I FDM asks, but when I create an application, its name was not Set correctly. Now I want to Rename it. How to do? Is this possible?

  (A) choose to the FDM login form and connection

  (B) select the application, and then click on 'change '.

  (C) Note the path of the FDM application

  (D) click the database tab and note the information of database

  (E) click on 'Cancel' and then remove the application from the previous screen

  (F) search for the path of the application file and rename the folder of the application to the new application name

  (G) click on 'Add' and enter the new name for the app, the description, the path of the Application with the name of the new folder, choose the Group of applications "MDF".

  (H) click the database tab and re-enter the information of database.