Replace cap on Satellite Pro L300

Hi, I hope this is an easy question to answer.

Had a single Cap pop off and I don't seem to be easily able to replace.

Any tips or pointers to how to replace?

Thank you
Paul

Hi Paul

Stand by. Unfortunately I didn't understand you.
What you want to do exactly?
Replace the CAP in place, or replace it with a new?

I mean if you have a new put in the right position and press gently downwards. It will not work if the little plastic mechanism is not broken.

Tags: Toshiba

Similar Questions

  • Triggers of Ctrl Key Caps Lock on Satellite Pro L300 - cannot open a session

    Hello

    I can't work my keyboard opn my satellite pro L300, I plug an external keyboard to log on.
    All the keys seem to work except the Ctrl key that activates the caps lock when I press on it.

    Ive scanned for viruses, reset the default keyboard settings and run the diagnostic tool and still no luck.
    My daughter can you press a combination of keys when she was on the phone active whiuch some lock but how do I reset it?

    Hello

    Check if the FN + F10 and FN + F11 are not enabled.
    If the FN + F10 and FN + active F11were, then you should see a green LED under these buttons. Check it out.

    Otherwise it s I do not know that any other combination of keys can remap the keys on the keyboard. for example; CTRL key to lock caps

  • How to get XP Pro DVD replacement for all new Satellite Pro L300?

    I have recently received a satellite Pro L300 series laptop PC and have decided to put this on the local domain on site. In the present, we would also like to downgrade to XP Pro machine but the DVD included to do was cracked, how can I get a replacement for this drive?

    I contacted the seller, and they noted the manufacturer, I searched this site and not able to find something that points me in the right direction.

    Hello

    The recovery media can be ordered under https://backupmedia.toshiba.eu/landing.aspx

    Good bye

  • Problem with some keys on Satellite Pro L300

    Hello

    I have a problem with the keyboard on my Toshiba Satellite Pro L300. I can not type 'a', 'q' and 'z '.
    ESC, F1, tab and Caps Look are also don't work.
    I don't spill any liquid on my PC. Need help please, I don't know what to do. Thank you

    You have the latest model of laptop. If there is a problem with the hardware keyboard will be replaced free of charge.
    I recommend you contact the nearest authorized maintainer and ask for help.
    With diagnostic programs, they can check the functionality of the keyboard, and see if the keyboard needs to be replaced.

  • Satellite Pro L300 - keyboard and touchpad issues

    Hello

    I just baught my GF a PC Toshiba laptop refurbed for his 21st birthday from a reliable source, it's a Satellite Pro L300.

    I started it until all the setup stuff, me there only to find that the keyboard and the touchpad work not AT ALL.
    The keyboard caps lock key is not even lights up when I press it.
    I downloaded all the latest drivers for EVERYTHING Inc. the touchpad, it makes no difference.

    I'm quickly running out of ideas and come to accept the fact that the keyboard and the touchpad is maybe defective and therefore evil must give my GF a defective laptop for Denise 21st, not happy :(

    Any1 have any ideas?

    Thanks :)

    Edit: OK, OK very strange, after that I sent this message, I tried the keyboard once more and it works fine?
    Could this be something 2 do with the download of the VFR package?

    The touchpad is always tired, even when I try the fn + f9 combo?

    2nd edition: Ok now the keyboard stopped working again!

    ON EARTH!

    Hello

    Looks like a keyboard problem. who knows why it doesn t work looks like something would be wrong
    I recommend you visit your dealer and replacement request
    Otherwise, you may contact the ASP in your country for a fix

    I think it's everything you could do

    Good luck

  • Satellite Pro L300 does not illuminate

    Hi all, I'm new to this forum.

    I have a Toshiba Satellite Pro L300 and I've had it for about 2 years.
    But yesterday I closed the laptop as usual. But later I went back to it and tried to turn it on. But it does not work. Instead, when I press the power button the LED next to the battery symbol flashes orange/orange 6 times and then turns off.

    Can someone tell me what it is? I tried to let it load, but that has not worked. The amber light is the only light that flashes. It does not recognize that I plugged in the charger and I don't think that the battery was flat. So I'm angry and helpless right now.

    Can someone help me please?

    See you soon.

    Hello

    There are several indicators;
    DC, while running, the main battery, LED HDD/ODD.
    So I guess the power LED flashes in orange. Right?
    This means that something was wrong on the motherboard.
    Maybe power supply electronic malfunctions

    In this case, there is no much to do only mobo replacement could help to...

  • Satellite Pro L300 will not start

    I have a portable Satellite Pro L300 and he won't start (in other words the power button and not going not past the first screen).

    Works for keyboard, but F2, F8 or F12 will not do anything, I can't here the disk hard powerup but it's like no one is at home. I don't know if it's the motherboard or the onboard battery. The computer is about 7-8 years

    Can anyone help.

    It s certainly nothing wrong with a RTC battery (as you said internal battery).
    The RTC battery can be charged. The unit must be turned on and adapter must be connected at least for about 18 hours.
    But I guess that this isn't a problem.

    The laptop does not start because of a hardware malfunction, but it's hard to say what role may be affected. But you should absolutely consult the RAM modules.
    This should be the first step, since the RAM modules are easy to replace.

    All other parts should be checked by the type of service.

  • Satellite Pro L300 - 29 c very dark display

    Hello

    The display on my Satellite Pro L300 - 29 c is very, very dark. It's dark, both during POST / in the BIOS and configuration once Windows loads. The brightness of the screen (Fn + F7) is set to the maximum. If I plug in an external display, which works perfectly. I can say that this model is not a physical wheel or something similar that controls the brightness of the screen.

    Should I have a hardware failure? Is this something fixable by the user?

    Thanks in advance.

    I can't say for sure, but I think FL inverter is faulty (backlight) and it should be replaced.
    The FL Inverter control the backlight. It is important that FL Inverter are not too expensive part.
    I take in a Toshiba certified maintainer and ask for help.

  • Satellite Pro L300-128 - startup problem

    Hi all

    I recently bought a Satellite Pro L300-128 GB specification, that has a Celeron M550 running Windows XP and a construction date of the end of June 2008. I have a problem with the switching on of the machine if it has been turned off for a long period of time.

    Basically, if the AC cable is inserted into the computer laptop and plugged in, the green light turns on, but pressing the button it does nothing. By the process of elimination, I have found that, after a short period of time (say 15-30 minutes) if (and only if) the AC cable is then removed from the laptop, it lights up then!

    Plug the AC cable, while the laptop is on, do not cut the machine and charge the battery as usual. The battery life seems very good, if a little short (say 1.5 - 1.75 hours when used "constantly").

    If the computer is restarted, it lights again very well - if it is turned off and left for a few minutes, once again no problem. But, if she is not with the battery fully charged and left all night - it lights again in the morning.

    Now, as a new machine, I'm wondering if the battery needs a long initial load (such as a mobile phone)? Nothing is said about it in the manual. I have not yet checked if the battery down completely himself during the night. I haven't run the battery to the laptop for a long time (say all day) to 'trickle charge '. I don't know if the period from 15 to 30 minutes to get the thing started is once again because the battery is completely discharged during the night (I need to check the BIOS to see if "Wake up we LAN/wireless" is activated)-anyone know how long a fully discharged battery must be charged before that the machine will let you start it?

    Under the machine, there are two battery release buttons and it seems loose - I don't know if it's related, but can't see how. Moreover, when the question arose (during the first delivery the laptop), I removed the battery and tried power upwards of food, but nothing to do.

    I ran all the software updates (chipset etc) I can find on the download page, the BIOS version is 1.40 (last) of the factory.

    Any suggestions would be welcome before I have use the service of repair under warranty for the first time! I don't know if it is related to the fact that the power button seems to be a micro switch rather than a good button/switch in the conventional sense of the term, i.e. you can 'feel' it do something!

    Thank you very much
    Richard

    Hello

    If you have purchased a new laptop, the battery is empty and needs to be charged in the first place.
    You can also connect the adapter to the laptop while the battery is empty and the laptop should also lights up properly.
    The laptop must also run without the battery and using only the AC adapter.

    It should also be possible to put the laptop by pressing the power button for about a second, if this is not possible, a malfunction of the laptop could be possible.

    In such cases, it s always advisable to contact the local ASP for a verification of the laptop.

    I mean your laptop is under warranty and if something is not wrong with the machine so everything must be replaced free of charge

    In my opinion, the laptop must be checked!

    Concerning

  • Power supply adapter new satellite Pro L300-12Y

    HI, I have a laptop Satellite Pro L300-12 years and my adapter is beyond saving. Were can I get a new one? I couldn't find any so I ask you directly

    Hello

    You can order a new adaptor AC to a Toshiba ASP in you country.
    You can also check the reference number of the old power adapter and can perform a search on the internet using this part number for a replacement part.

    Welcome them

  • How can I fix the screen on Satellite Pro L300?

    How can I fix my screen Satellite Pro L300? I went by mistake about it.
    Although there seems to be nothing wrong with the external armor but there seems to be a few lines on the screen.

    The glass is cracked? You see the flow of liquid crystals when you move the screen?

    If the lines are perfectly horizontal or vertical, and then the glass behind the protective plastic surface is cracked, requiring a replacement LCD.

    An authorized service provider can give you a new LCD Module. Visit the Web from Toshiba for a list of the ASP

  • Satellite Pro L300-152 - unable to connect to TV, projector or a external monitor

    Hello
    Peuvent some please help?

    I bought a Satellite Pro L300-152, model without PSLB1E-01R015EN with Vista 32 bit a few months ago to replace an old Toshiba laptop not.

    The problem I have is that I can't connect external devices such as TV, projector, or a monitor.
    I used another laptop in the past with my TV and projector and have had no problems at all. I connected via the VGA port, as it is the only port with the exception of USB. Using a VGA cable, I tried all the settings that I have used in the past, but with no joy.
    I did the setting in the display settings and the FN + F5, but nothing comes up on the external screens except no signal.

    I tried to solve this problem for months and need help, please.

    Thank you
    Karl

    > When I try to update the bios driver I get a message: insydeflash the virsion or ROM file is not newer than the version of the BIOS?

    Strange what s... what version of BIOS is installed on your laptop?
    As much as I know at this time the European Toshiba page provides the version of 1, 50 - WIN update of the BIOS for this model of laptop.

  • Satellite Pro L300 1AI LCD screen backlight not working not

    Hi all

    I have a Satellite Pro L300 1AI running Windows Vista the computer starts and works fine but the backlight on the screen doesn't seem to work.

    Y at - it none of the Vista settings that can affect this (other than the Fn key command on the keyboard and settings) in Control Panel? Strangely, it seems to have happened since I installed Skype but I don't see how this could possibly affect it.

    Any help is much appreciated...

    Hello

    What s wrong exactly? Brightness screen laptop s is too low?
    Everything you see on the screen as behind a thick fog?

    Well, usually the FL Inverter control the backlight of the screen and if the FL inverter starts to malfunction, so you would get the problem like this.

    There is no alternative to replace this inverter FL.
    It s a small part behind the frame of the screen I think that it s a job for a technician in ASP.

    Welcome them

  • Installing XP on Satellite Pro L300

    I already did some research and came across this thread
    [t 26040]
    who has some interesting information.

    However, it is believed it I don't format the HARD drive after using the Intel Matrix Storage Manager Manager.
    How am I to install XP on the computer and wipe Vista in the process even if I can't format the drive?

    If I do not format the drive I find wih vista still be there while I install XP. I received a bunch of laptops to the school, I work to untangle and install programs, etc, however that was purchased for me is machines with Vista basic which is bloody useless.
    I have the machine's Satellite Pro L300.

    A clearer explanation of what to do would be really convenient.
    Also, in addition to the driver manager, do I need specific drivers for the HARD disk?
    I can't find anything like this in the pages of pilots for the L300 Toshiba.
    Thank you

    Roy

    Well, the XP installation is very easy.
    Some forum posts describe this procedure too.

    You read that the HARD drive should t be formatted after including the SATA driver. This is right. This means that you shouldn't t change all partitions and must format the C partition prior to installing XP.
    But you can easily install the XP on the same partition as Vista. The new facility will replace the Vista operating system and installation of XP would go you smoothly.

    The second possibility is to integrate the SATA driver in the OS XP using nLite as already mentioned above.
    nLite would create a new XP CD and would include the SATA driver.
    Then, you would be able to begin the Xp installation using the new CD and format the HARD drive and create or delete partitions.

    Easy ;)

  • Satellite Pro L300 - may not always connect to the same strong connection router

    I currently have a Satellite Pro L300-155. At work, the WIFI signal is strong everywhere where I am in the building because we have 2 WIFI connections. However, I can connect okay in 1 room but if I just go in the other room, I'm unable to connect - and the connection is still strong. This also happens intermittently at home.
    Is it of diagnostics that I can run on the Toshiba to test wifi?

    Where can I find what chip it is? Where is the wifi location - on a motherboard, etc?
    Can it be replaced and where I could quote from?

    Thanks in advance

    Hi cooky44,

    In my opinion, you should update the routers firmware and update your WLAN driver.

    Furthermore, I have created an interesting document on improvements to WLAN connection:
    [WiFi: improved reliability of connections | http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=68]

    Also check the forum similar topics WLAN.

Maybe you are looking for

  • FF reads JPG files without. JPG ext as BIN files

    HelloWhy the IMG in the http://oiswww.eumetsat.org/IPPS/html/MSG/RGB/AIRMASS/FULLRESOLUTION/index.htm and other satellite service are read as BIN files? Is - Why FF compels me to SAVE their rather than show them (after application of picture) just li

  • Where is the bookmark all tabs function?

    I recently updated from a very early version of the FF to 13.0.1 and bookmark all tabs from the bookmarks menu has disappeared. I always use this feature, so I desperately need. Any help is greatly appreciated.Thank you!

  • How to remove the firmware installed on my Qosmio?

    I just downloaded and installed the latest update of Firmware for DVD RAM from drivers Toshiba download page and completely slowed down my Qosmio G20-106. Pls help, I know not what to do? How can I remove this update of the firmware? The firmware tha

  • 15z M7S73AV_1: Wifi does not work, is ethernet.

    I connected my computer after a recent Windows Update. I started playing Fallout 4, when my computer restarted unexpectedly without any notification that it crashed or something of the sort. After that I logged on, I noticed that I was not connected

  • Remove the check mark a ring or an Enum control

    This was requested previously by others, but I've seen a complete response. For a control ring (or enum), a check mark appears next to the current item / selected when you open the menu drop down. Is there a way to remove the check mark? I would like