replace color (why is it impossible?)

Similar Questions

• Why the Replace Color tool does not replace my color?

  I have the following situation:

  White in the image.

  Choose the color replacement tool

  Choose a red color

  Apply the white color tool

  Nothing happens

  Change color to light mode

  Receive a brownish band where the tool is applied

  Change the color mode and apply the tool to brownish band

  Receive a red strip, where was formerly the brownish one.

  See the three States of the image in the attachment.

  Why was not applied in the first and replaced color replacement tool white with red?

  

  White is not one any colour change, because there is nothing to change.  Try to place a filled layer of red, above a layer filled with white and setting the blending mode of the layer of the red color to the color.  It just goes to white.  Now fill in the color of white background with grey wire (any value will do.  The darker the gray, the more saturated the Red will become.  Less of the tracks until you get 50% gray.  From there in complete darkness, it becomes darker. When you reach the full black, once more, there is nothing for the color work on, and it appears black.

  It is a useful exercise of understanding how to mix work modes.

  

• When I check my battery icon it says, ' Condition: replace soon "why?

  Recently my 2010 Macbook Pro battery icon when you press says "Condition: replace soon" why?

  The most obvious answer would be that your battery reaches the end of its useful lifetime.

  If this original battery (which would be about five years old today)?

• How to use the tool replace color with the white foreground color?

  I have a black and white image that contains text. I want to change the white area to a specific color.

  Using the Replace Color tool, it doesn't seem to work by selecting the white - he will only select black.

  I need to keep black text not affected.

  Can someone give me a simple method?

  Thank you

  Sam

  the easiest way would be to draw rectangles of color on the new layers above the drawing and set the layer blending layers of color to multiply or darker color.

• Replace color replaced by Dark, perhaps almost black instead of color I want

  Using Win7, CS6. When I try to replace color, say red with pink, the target turns dark, almost black. I tried every setting I can think, but I can't work. Any thoughts would be appreciated

  To change the colors, it's always depends on the color values you are trying to change amd how much detail you want to keep in your image.

  on a personal level, I prefer not to use the color replacement tool,

  what I do in this simple case is to use the brush with different blending modes

• When adding borders, I get a border grid instead of color why?

  When you add borders to my photos, I get a border grid instead of a color why?

  Hello

  This checkerboard border represent the transparency you can change this setting by going into the preferences of transparency.

  Go to the Photoshop preferences, and then choose the transparency and the range

  change the size of the grid to 'None '.

  Thank you

• Why is it impossible some links to download older versions, I've already paid for. ?

  Why is it impossible to get links for the products that I paid for?

  It is not impossible, although it helps if you identify what applications you want to download.  If you were looking for this forum, you'd probably find links to each of them.

  Download and Installation Help-
  https://helpx.Adobe.com/download-install.html

  http://www.Adobe.com/downloads/other-downloads.html

• Why is it impossible to cancel my account? I can't to any member of the cc for this team

  Why is it impossible to cancel my subscription to the cc? I can't get a hold of someone to do and the site continues to send me round in circles. I want to cancel my member ship today, please help

  Hi Samantha,

  Please login using your ID on the support for assistance with cancellation page: Contact customer service

  Kind regards

  Akshay

• Find and replace colors

  Is it possible to switch automatically by, say, 100 charts and automatically replace color A and color B?

  Imagine that you had a lot of cartoon characters you want to customize with colors in a uniform of special schools.

  Possible with an action.

  What you need to do is

  1. draw an object, give it a name

  2. give the exact color you want to replace

  3 select fill even

  4. apply whatever color you want on the fill

  5. Select the object by name

  6 remove the object

  Run again to replace the other colors.

  Make a batch with a folder.

• Replace color while preserving the details

  Hello. I'm new to this community and wish to ask a question on, specifically the removal of tattoos, but it would apply to any replacement color. I have a picture of a lady who has a large tattoo on his back. This covers his shoulder blades, and there's shadow and light on its back, which is also covered by the tattoo.

  How can I change the color of the skin around the tattoo while maintaining the depth / shadow and texture in detail.

  Thank you very much

  David

  I tried to use a different approach, the gradient tool...

  1 use the pipette to set the foreground color to the part lighter of his right shoulder (RGB 236,220,220) and set the background color to the darker part of his left shoulder (RGB 200,141,111).

  2. roughly selected tattoo and feathered the selection 3 px.

  3 activate the gradient with the first options plan background and gradient tool linear. Called the gradient from bottom to top, left, right as shown here:

  

  The Gradient takes a lot of trial and error: where starts and ends at the line, that the foreground/background colors work best.

  Here is the result:

  

  Then, I used the Clone tool to illuminate the excessive shadow on the right side.

  Also added some shots more in the middle of his back with the brush with large brush (50px) tool and the same background color but a low opacity (50%). You can still change by painting the skin tone clear or dark as you wish.

  Here is the result:

  

  Since the Gradient is inspired by solid colors it destroys existing contour, texture, spots of birth, etc. You can restore certain contour by painting as I did above. If the skin appears too smooth you can try to apply the noise filter on the same area. Here I used a $ 1.

  

• Help, replace color

  Hi all

  I'm new on Photshop and difficulties to do that I suppose to be a pretty simple job.  I have pictures black and white that I need to convert in two colors.  I've done enough easily before in other programs.  (The drawings in the headers of the pages of this Web site, www.coggeshallfarm.org, I converted using the feed to color breastfeeding in Paintshop Pro.)  I use the replacement color to change black and gray, but they are sitting on a white background that I can't replace.  I don't know there is something obvious that I'm missing.  Any help you can give would be great.  Thank you

  Justin

  

  Or just the back - and foregroundcolors before you create the gradient layer to the map.

• "Replace color" missing in CS3 tool

  I use CS3 (Windows) and miss me the "Replace color" tool

  All other tools seem to be available (I think).  See a screenshot of my toolbar below.

  Could I have removed inadvertently deleted / my color replacement tool?

  Is there a way to restore my color replacement tool?

  CRS

  

  See the tool stamp at the bottom right of the bitmap tools? Click on the small triangle in the lower right to bring up the context menu. This is, as well as the red-eye removal tool. Any time there is a small triangle, which means that there are several tools in one box.

• Where is the support of Motorola? Why is it impossible to have a device repaired or replaced?

  I will outline the horrors of dealing with the service the customer of Motorola here, I hope that this will serve as a warning to anyone considering another device from Motorola. The products are great, but it's annoying to know that no support if something happens to your device.

  My Moto X Pure started showing some areas lighter/bright on the lower left of the screen. These were not there before and are visible when the active view is activated in low light. I am concerned about a breach or possible degradation of the screen, so I reached out to Motorola support for this issue.

  • 06/10/16 - 'Advance Exchange Program In warranty repairs Standard' - launched.

  I opted to pay the fees so that a replacement can be sent to me before I send my camera back to repair. I don't have a camera and I can't be without phone.

  After several days of waiting for my replacement and constantly check the status online which showed no info on my replacement, I received an email.

  • 10/13/16 - "we will reach out about the repair of your...» Unfortunately we are unable to repair your device in the time promised, so that we will send you a code to create a phone that is brand new. We will also transfer your current warranty to the new. »

  According to the email, I should have received a code in an email in 24 hours. The email never came.

  • 26/10/16 - I call support. After being placed on hold for a while, the call is disconnected. "This mail is on a case pending on your Motorola device. I'm really sorry for our call has been disconnected, by now, I'm not allowed to call back you. »

  So I remember, and after being placed on hold for some time by another representative, he returned on the line to tell me that, unfortunately, the it Department cannot provide me with a code. But, they will call me within 2 business days to give me says code. Of course, nobody calls me back.

  • 29/10/16 - "this email is on a case pending on your Motorola device. Contact Motorola repair climbing Support Team 1-888-355-8422. »

  So it seems that for some reason, my case pending is paused. Frustrating as it is, I remain hopeful that some way, somehow, that someone would join me and give me the code that I was promised several times so that I can order a replacement unit. Nothing.

  • 09/11/16 - I called again. I described my frustrations so far, explaining all this to the rep of the 'climbing Support Team. I'm put on hold. The rep comes back on the line only to tell me, "Unfortunately, I can't provide you with a code at the moment. If you call back tomorrow, I can give you the code tomorrow. »

  Really? I honestly think at this point they try to frustrate me to the point where I give up trying to replace my camera. What happened to the customer support? What happened to honest business practices? What is the point of having a support team, if all what they say that they can not help? I am in desperate need of a resolution.

  Buyer beware.

  itsjustfrank wrote:

  I will outline the horrors of dealing with the service the customer of Motorola here, I hope that this will serve as a warning to anyone considering another device from Motorola. The products are great, but it's annoying to know that no support if something happens to your device.

  My Moto X Pure started showing some areas lighter/bright on the lower left of the screen. These were not there before and are visible when the active view is activated in low light. I am concerned about a breach or possible degradation of the screen, so I reached out to Motorola support for this issue.

  • 06/10/16 - 'Advance Exchange Program In warranty repairs Standard' - launched.

  I opted to pay the fees so that a replacement can be sent to me before I send my camera back to repair. I don't have a camera and I can't be without phone.

  After several days of waiting for my replacement and constantly check the status online which showed no info on my replacement, I received an email.

  • 10/13/16 - "we will reach out about the repair of your...» Unfortunately we are unable to repair your device in the time promised, so that we will send you a code to create a phone that is brand new. We will also transfer your current warranty to the new. »

  According to the email, I should have received a code in an email in 24 hours. The email never came.

  • 26/10/16 - I call support. After being placed on hold for a while, the call is disconnected. "This mail is on a case pending on your Motorola device. I'm really sorry for our call has been disconnected, by now, I'm not allowed to call back you. »

  So I remember, and after being placed on hold for some time by another representative, he returned on the line to tell me that, unfortunately, the it Department cannot provide me with a code. But, they will call me within 2 business days to give me says code. Of course, nobody calls me back.

  • 29/10/16 - "this email is on a case pending on your Motorola device. Contact Motorola repair climbing Support Team 1-888-355-8422. »

  So it seems that for some reason, my case pending is paused. Frustrating as it is, I remain hopeful that some way, somehow, that someone would join me and give me the code that I was promised several times so that I can order a replacement unit. Nothing.

  • 09/11/16 - I called again. I described my frustrations so far, explaining all this to the rep of the 'climbing Support Team. I'm put on hold. The rep comes back on the line only to tell me, "Unfortunately, I can't provide you with a code at the moment. If you call back tomorrow, I can give you the code tomorrow. »

  Really? I honestly think at this point they try to frustrate me to the point where I give up trying to replace my camera. What happened to the customer support? What happened to honest business practices? What is the point of having a support team, if all what they say that they can not help? I am in desperate need of a resolution.

  Buyer beware.

  Hi, sorry for the problems you have experienced throughout the process of replacement. I would like to tender hand to you, so that we can this resolved.

• HP ENVY - m7-k211dx: replaced HD with SSD again, impossible to install network drivers

  Hello

  HD on HP ENVY m7-k211dx not dead, no recoverable data. Figured why not install an SSD so replaced by a new Samsung 850 EVO 500 GB.

  Note: I have built many computers to office since the Pentium 4 days, consider myself as an amateur

  Installed Windows 7 Pro 64 bit without any problems (after activating the suport inherited in BIOS)

  Downloaded all the drivers from the HP site and copied on DVD

  Record fell with drivers on the desktop

  installed the chipset driver sp73543.exe, restarted everything is fine

  Installed USB driver sp70645.exe, restarted everything is fine

  Then tried to install two network drivers downloaded for this laptop specific to HP for LAN and Wireless support Web site:

  RTL8723BE/RTL8188EE Realtek 802.11b/g/n Wireless LAN Drivers -sp69888.exe

  Realtek LAN (LAN) driver -sp68120.exe

  First tried to LAN, Ran exe, checked the license agreements, etc. and it started to install, after a few seconds and error message pops up:

  "FindFile failed.

  After the closure of this pop-up a new error message:

  "Realtek network controller is not found. If deep sleep Mode is activated Please cable.

  Then tried wireless installation, after that starting exe command winow popped up a few seconds showing:

  "Please wait for the installation.

  close the window after a few seconds, nothing after that

  After trying several times to install drivers with the same exact results I went by the process of reinstalling Windows and go thru the pilot again installation process with the exact same reslts. Downlaoed new drivers with same accurate results

  Clues as to what may happen?

  Thank you and my apologies for the wall of text

  Hello:

  Normally the ethernet driver will install if you do not first install the chipset driver.  Since you've done, it's a good question, why you notification of deep sleep.

  Try the driver ethernet directly from Realtek and see if it works... 3rd driver on the list.

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1 & PNid = 13 & PFid = 5 & Level = 5 & Conn = 4 & DownTypeID = 3 & getdown = false

  Wireless should be easier to correct... parts list indicates that your laptop comes with an Intel 7260 AC wireless network adapter.

  I see no W7 wireless or bluetooth drivers listed for this card on the HP website for your laptop, so use the latest Intel.

  Wireless: 64-bit is the 2nd file on the left side of the Web page.

  https://Downloadcenter.Intel.com/download/25510/Intel-PROSet-Wireless-software-and-drivers-for-Windows-7-

  Bluetooth:

  https://Downloadcenter.Intel.com/download/25137/Intel-PROSet-Wireless-software-for-Bluetooth-technology-for-Windows-7-64-bit-WP-

• OfficeJet 6600: replace color ink cartridge black

  I have a HP Officejet 6600.

  I have ONLY prink black and gray, but the other color cartridges run out.

  Can I replace Magenta, Yello and blue cartridges with black cartridges?

  Thank you!

  Because some ink for color cartridges are used to help the black ink.