Replace the caller ID

Similar Questions

• Replace the Caller-ID by 'name' of the HuntGroup or BACD called

  Hello guys,.

  installing a new UC560 for a client and he asked that I don't know if it can be configured on the system (probably not by the CCA, but maybe CLI?)

  I put a few B - ACD queues, and some groupings of posts too, to manage the bilingual calls.

  When these groups of B - ACD and hunt are called, the customer is no need to see the phone number, but rather to know which queue or huntgroup was called, so that they could answer the call in french or English from the beginning.

  Is it possible to replace the caller id, when these specific benefit and bacd numbers are called?

  I would need the following

  BACD1 (#870): French of Customer Service

  BACD2 (#871): English Service customer

  HUNT1 (#850): billing

  HUNT2 (#851): accounts payable

  Let me know if this is possible and how (of course)

  Thank you!!!

  The only thought that comes to mind is using a TCL script to do.

  Very good documentation on TCL scripting is available in UC500/FMC.

  Please note that it definetely would NOT be taken in charge of Cisco.

  If you need help, I could probably help, otherwise Paolo Bevilacqua is a bit with TCL and might have a solution for you.

• How to replace the call number part on a SIP section if none is present

  Hello

  I have a 2821 router that is connected to a SIP trunk.  This router also has a PRI interface that is connected to a PBX Mitel.  The Mitel used the router has a primary connection to the PSTN.

  The Mitel will send the party call number most of the time, but sometimes it isn't.  All calls that are sent to the SIP provider without a party call number are deleted.  I don't know if can substitute part number calling using the command in clid on the Dáil peer, however is it possible only override the calling party number if I do not get one of the Mitel?  He got a number of appeal left like a DID I want to pass along in the SIP call.

  Thank you.

  You should be able to do it with a voice translation rule that matches an empty ANI.
  30rule translation-rule voice 1 / ^ $\+631689\(...\) / / 01689\1/rule 2 / ^ $/ /555666777/
  translation-profile PSTN-OUTtranslate of the voice calling 30

  First rule to match a real number to a PBX, to adapt according to your needs. The second rule matches a null value and changes to 555666777, who adapt to what you would like to send to your phone company.

  Do not forget to rate helpful responses and identify useful or correct answers.

• Replace the call button and hang up

  Hello

  To overrride the button back on a smart blackberry phone I override the onClose() method.

  Is there one or more similar methods for buttons (green) call and hangup (red)?

  I want to just make sure that whenever the user leaves the application exit code is executed.

  Thank you

  There are two options:

  1 to implement the keyListener (KeyListener) interface.

  2. replace deactivate() and close() functions.

• Want to 800-060: reactivation after replacing the motherboard

  I bought a HP Envy 800-060 with Windows 8 pre - install Amazon in July of 2013. It was an incredible computer since that time, and when the free update of Windows 8 for Windows 10, I did immediately released. Recently, however, the motherboard has failed on the computer. It would not stay same POSITION, and after much troubleshooting, I finally decided to replace the motherboard. Now that the computer is running again, I guess that the motherboard change was sufficient for the operating system to think that it is no longer enabled. I was never provided with a key of Activation of OS (Win8 has been pre-installed), and Microsoft has suggested that I contact HP to find the original key. I've looked everywhere on the chassis and inside the tower for a valid Windows activation key, nothing helps. I tried to find a phone number to call for support, but my product is outside the guarantee. I don't need advice or troubleshooting tips (so I don't pay the $59.99), all I need is my activation key valid Windows based on my serial number of the product. Anyone know the best way to achieve HP with this problem and have it is resolved?

  Thanks in advance!

  JC

  jcontino889

  The unfortunate, is that your original product key has been incorporated in the firmware original by HP motherboard UEFI when the PC was built.  There is no way to recover this key now.

  HP retains no record of keys to individualized product corresponding to individual computers, so they won't be able to provide you with the original key - and they are under no obligation to provide you with a SECOND key, that you didn't do the replacement of HP hardware.

  With the product now being out of warranty, it's really call HP or not you upload support - and the experience I have had with older equipment-, they do that, there's just no way around IDs.

  HP customer support is really the only way you have to get support.  If they don't help you for free, because your PC is out of warranty, there is nothing we can do about it on this forum.

• My ink carriage does not move to the way to replace the ink cartridges. I think I put the ink in the wrong office

  My ink carriage does not move to the way to replace the ink cartridges. I think I put ink in bad officejet 3830

  Hello! Welcome to the community @Tammy111 HP

  I read your post about the ink carriage being stuck in your Officejet 3830, and I wanted to respond to troubleshoot. Try these steps and if the transport is not yet move to order so that you can access the ink, then your best bet would be to call phone support to see if they can replace the unit for you. I'll leave their details below.

  HP OfficeJet 3830, DeskJet 3830, 5730 printers - an error 'Transport Jam'

  Click on the thumb to below testify my help!

  Click on the "accept as Solution" if I'm you guide to a solution!

  Contact HP:

  Step 1. Open the link: www.hp.com/contacthp/

  Step 2. Enter the product number or select Auto detection

  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.

  Step 4. Scroll down and click on: contact HP options - click Get phone number

  File number and phone number appear

• HP Pavilion Notebook n267sa 15: replace the hard drive and restore its 8.1 windows

  the hard drive corrupt including the partion of rescue I had to replace the hard drive. This left me with a work computer, but no o/s. where and how can I get a copy of the 8.1 window without having to buy a new copy

  Hello:

  You can order this e-partner HP recovery disks from the link below for your model.

  http://www.best2serve.com/page/rcd_landing?txt_search=F9F41EA

  You can also see if you can order directly from HP to the United Kingdom by calling this number...

  0207-660-0596

  Mon - Fri 08:30 - 18:00
  (except public holidays)

• Replacing the battery next USA

  I bought t my laptop from the United States after 3 months, I come home (Bahrain)
  I'm in Bahrain now and I checked the web site of Toshiba I found advice to replace the battery
  So I call the dealer to Bahrain and get the information that the dealer won't give any support in battery replacement and I don't know if this statement is true or not
  Please give advice about this

  If you write on the Toshiba battery replacement program I think it can be done in the country of purchase only.
  This is the battery OK? I mean that if everything is OK there is no reason to panic.

• HP 700-330qe: how to disable or replace the SSD on HP 700-330qe

  Help for my HP 5 months! It kills Me!

  I bought a HP 700-330qe in 2014 from Amazon and just started getting SMART of Windows hard disk errors whenever my computer restarts, telling me that the hard drive failure is imminent. He also tells me to shut down the computer immediately, save it, contact the manufacturer, etc. Never seen it in any PC I owned before. Naturally, I freaked out and did some internet research, discover that it is relatively easy to clone and replace a hard drive. I ordered a new hard drive Western Digital 3 TB of Amazon, a docking station for disc brand cable hard of Amazonia and downloaded the Macrium Reflect free disk management software.

  Items from Amazon arrived in a few days and I got to work making a clone of my one and only hard drive. Clone was made with little problem. Shut down the computer, it opens and replaced the old hard disk with a new one. Start the computer to the top and got the same message on imminent hard drive failure! So I paid more attention to it this time and looked up the model number in the warning message, which was: ScanDisk SDSA6DM - 016 G-1006. I Googled that and found it was the disk solid state drive (SSD) used as a cache to speed up certain operations. Arrgh.

  I stuck my old hard drive in the hard drive docking station and was ready to be cloned partition SSD and all partitions on the hard drive to the hard drive and the removal or at least unplug the SSD drive to get rid of this problem. The software told me that the SSD is shaped as MPR (or something like that) while the main hard drive is formatted as GPT, which are different types of hard drive, formatting, so you cannot copy these different types of partitions on a hard drive.

  So here's my options as I see them:

  (1) I have to either disable the SSD, but I don't know how and I don't know if the computer will always start the same. Windows is partially installed on SSD? I do not know.

  (2) to clone and replace the DSS about the same way I did with the main hard drive. I can get the SSD according to Amazon for $49: Kingston Digital 60 GB SSDNow V300 SATA 3 2.5 (height of 7mm) with adapter Solid State Drive SV300S37A / 60G.

  For the option #2 above, the only problem is that I have no idea where the OEM SSD of ScanDisk is currently installed in my computer! It is in the hard drive cage? I don't see anything else installed there. I thought it was in the cage directly above the hard drive cage, but I think that what I was looking at was the front memory card reader/USB ports. I don't have on CD Player installed and I can see where it is. Help!

  PS: I also downloaded EaseUS Partition Master 10.2 and it allows to analyze the SSD drive. While it was scanning it found 9 bad blocks (on tens of thousands of blocks), but when he finished the analysis it says there is a lot of blocks. For this to happen on an SSD, which is supposed to be more reliable than hard disks of small, to make this so much more aggravating situation. At least, I upgraded my hard drive 2 TB to 3 TB and know now that I can do. Sigh.

  Yes, I had a frusrtrating very experience with HP customer support, even after it was raised to a case manager based in the United States, who called me home. She found no part at all in its computer system and wanted to send me in my whole PC to a service center customer (it was still under warranty) which would take at least 3 weeks. I said no and went forward and the DSS out of my computer. I stopped receiveing the error messages and did not notice a slow down in performance, but went ahead and bought and installed this one, just in case it actually provides an advantage: My Digital 32 GB SSD Bullet Proof (on Amazon for $25).

  As a note to end funny to this drama, about 6 months after my discussion with HP support I describe above, I have randomly mailed an envelope of HP with the exact 16 GB SSD, they said that they didn't in their system. It also included an envelope to return my faulty SSD and a stern note saying if they do not receive the defective item within 3 days my credit card (that I never gave them) would be charged. I threw a long time ago the defective item and just throw it back into a drawer... or maybe that I returned it in the envelope for return of defective product? I don't remember really.

  In any case, it was a horrible customer service experience, and since then I have another HP Envy (my PC 3 year to my son) have a hard drive and video card fail at the same time. I replaced the two after a few problems, but no matter what I do, it can get its setup dual monitor want to work more. I tried several video cards and nothing.

  All of these factors combined caused me write off HP for the future PC purchases. The guys in my company IT say it's the reason why we only buy Dell computers at work (we have hundreds of maintain). They do not use strange pieces like these small SSD cache records, and their parts are standard and easy to replace because of the case. I'll either get a Dell or ASUS as my next PC.

• How to replace the keyboard on a Toshiba laptop? SOLUTION

  If your Toshiba laptop keyboard does not work as it should?

  If your keyboard problem comes from a spillage, a hard lump, or you simply worn, you don't have to worry about investing in a new laptop, you can solve your keyboard with a simple Exchange. The good news is that setting a keyboard does not have a lot of technical skill. In fact, keyboards are among the mobile more easy to repair.

  Remove the frame just above the keyboard. You will notice a Tin strip of plastic located just above the keyboard. This band is called the keyboard bezel and you remove by gently lifting the edge upward with your small standard screwdriver. Work your way through the bezel lifting as you go. The bezel is that a nod to the unit, so remember to be gentle, as you work your way through.

  Remove the screws from the laptop keyboard Toshiba G83C000872. When the frame is removed, you will find three or four screws at the top of the keyboard. Using your small Philips screwdriver, remove these screws and place them in a safe place where you will not lose them.

  Remove the keyboard. With the screws removed, gently lift the keyboard from the top down. You will notice a sliver of wire from the keyboard to the laptop. Lean toward the front of the keyboard so that you can access the ribbon cable connection.

  Remove the Ribbon wire. Take your standard screwdriver and gently push up the support locks, on both sides of the ribbon cable socket. These support slide locks up slightly as you push to release the wire.

  Connect the keyboard to replacement. Everything as you have removed the old keyboard, you will now push the replacement wire Ribbon in Ribbon decision-making. With a small screwdriver, push the brackets in place to fix the Ribbon.

  Screw the replacement keyboard. Using a screw, connect the keyboard. With the keyboard which is held in place by the screw, start the computer and test the replacement keyboard. Once tested, replace the remaining screws.

  Insert the bezel above the keyboard. With the keyboards now set by all the screws, place the bezel back on its opening and put it back. Start at one end and work your way through.

  Thanks for teaching.

• printer says to replace the ink cartridge, even though it is new

  Hello!

  Could really use some help with my printer. I recently bought new ink cartridges and I replaced the "old", but then my printer started to show on the compensation carriage jam error messages, even though it was clear and since then, he has constantly shown this error message on ink. He wants me to replace an empty ink cartridge to continue printing, it won't work otherwise.

  Ink, that I placed in the printer is totally new and authentic, but there is no answer, he displays the same message to two ink cartridges, which makes me realize that it of not really discern who is new or empty.

  If I remove them both, it tells me that there is an empty ink or damaged.

  I tried the reset of the printer, stop it down and turn, but the same message is displayed immediately. The light next to the screen flashes all the time.

  When I replaced the old cartridges I did not process the printer, I replaced them all first and then let him treat. Maybe it was wrong to do so?

  Any help is appreciated!

  It seems to be a problem with either the hardware of the printer or the replacement cartridge. If it is the cartridge, it should be covered by warranty (if it's authentic HP) given that you bought at just. Now, I think that your best shot would be to contact HP Technical Support to see all the other possibilities for you.

  The only other option would be to try an another new cartridge replacement for rule in or out the cartridge at fault.

  If you call in North America, the number is 1-800-474-6836 for all other regions, click here.

• How to replace the units of a channel using scripts % 3F

  Hello

  I have a few questions about the manipulation of the channel property 'unit' by scripts.

  Case 1: If the unit in the chain is not specified in the properties, what command should be used to add the inside unit?

  Case 2: When I create using the string ' Call.Root.ChannelGroups (1). Channels.Add ("name", DataTypeFloat64, 1)', empty space of unity being, what other command can be used which was available to the units to the breast?

  Case 3: Consider that I have channel (channel A) with the already defined unit (x), how can I replace the unit with another (y)? (Units of x and there belong to different physical quantities, so the ChnUnitConvert)

  Pls let me know if you nee details on the same.

  Kind regards

  Fazil Shah.

  Hi Fazil,

  The key word for SCRIPT DIAdem units is "unit_string". If you open the SCRIPT and open the channel property list you can select the property unit and drag & drop it in the SCRIPT Editor. This creates the code of script for the property.

  Case 1
  You have the options of towing: a quallified assignment complete or a channel object variable (if you have more settings for the channel of the second alternative is better)

  Data.Root.ChannelGroups (1). Channels ("mychannel"). Properties ("unit_string"). Value = "MyUnit.

  or

  Dim oChn
  Set oChn = Data.Root.ChannelGroups (x). Channels ("mychannel")
  oChn.Properties ("unit_string"). Value = "MyUnit.

  case 2
  You must add the unit after the creation of the channel

  Set oChn = Data.Root.ChannelGroups (x). Channels.Add ("MyChannel", DataTypeChnFloat64)
  oChn.Properties ("unit_string"). Value = "MyUnit.

  case 3
  It's the same as case 1 or if you do not want to use an already existing channel device, it can look like this

  oChnA.Properties ("unit_string"). Value = oChnB.Properties ("unit_string"). Value

  I hope that answers your questions

  Greetings

  Walter

• Please help with replacing the W700 screen

  I'm at the end of my mind here, so I really hope that someone can help you. First of all, some background: I work for my part, repair and maintenance of computers, and I have a client with a Lenovo W700 requiring a new screen. The original had been broken.

  Seemed easy enough, so I ordered a so-called compatible more than a month. I installed it and it did not work. I sent a replacement. The replacement does not work either. I thought at this point, that a genuine part of Lenovo would be better than a "compatible" by someone else. I went on eBay and found the original part.

  It does not, almost - but the backlight does not come on. I can vaguely see what is on the screen, but that's all. I sent a replacement, but the replacement has the same question. But here's the kicker: the original BROKEN screen backlight works normally.

  What happens here? Y at - it a setting I missed, some rider, I need to clear, or is it possible there is something wrong with the machine? I need a definitive answer for my client, but here, I'm stumped.

  I can't really diagnose of 3000 miles away, but you can certainly damage the motherboard by breaking the screen. It is more likely with the screens LED backlight, but it is possible with a CCFL display like yours. There is usually 2 fuses (F7 and F8) that control the backlight. I don't have a motherboard of w700 to look at for more information. On most machines, they are on top of the room near the connection of the LCD screen. You can have one or two blown fuses. Most of the shops don't want to or cannot replace the fuses. You need good equipment. It is not a job for an iron solder 'Radio Shack'. Unfortunately, you can watch replacement motherboard, which is a big problem for this model.

• Replaces the screen 17.3 inch LED on laptop.

  I have a Hp Envy 7273ca Pc notebook DV7 there a 17.3 inch 1600 x 900 led screen that has a few brands of pressure which are annoying for me they look grey and ugly. I was wondering how much it would cost to replace the screen or at least an order of magnitude figure I paid close to a thousand dollars for this laptop and prefer not to buy a new. They will also replace the envelope outside of the screen or just the screen? 1 last qustion I have 1 usb port which does only once a certain time, but some works still in time can it be replaced or I need to replace the motherboard that I won't do via USB 1.

  Hello

  Probably, you need to call HP (or authorised dealers/repairers) and ask for a quote. The price on Amazon is only part, and from the parts store are for only part. Please use the following numbers:

  http://WWW8.HP.com/us/en/contact-HP/phone-assist.html#section1

  or call the HP technical support: 800-474-6836.

  Kind regards.

• To replace the noisy fans in HPE h8-1030

  Hello

  I need help to solve a problem of fan, I have a 2 years HPE h8-1030/pc, last year, 1 fans became more louder and I noticed snapping sound. I tried a few minor corrections, changed the power setting and vacuum the fans, (as recommended on the hp site) the side of the case was deleted to determine which fan is the source of the problem, this leads me to believe that the problem of noise is due to the heat, which brings me to why I contact hp support I need a recommendation of what I should do next, I need to what type of replacement or the fans? I looked on Amazon but don't see anything that was specific to my pc case or the processor (AMD Phenom II X 6 1090 t. 3,20 Ghz 64-bit) and would like some advice. Once again the specifications are:

  -HPE h8-1030

  -AMD Phenom II X 6 1090 t. 3,20 Ghz

  -64 - bit

  -Windows 7

  Specific models, the brand names would be very useful

  Thank you

  Hello Tickmcc,

  You need to replace the fans in your system.

  Here is a link to the HP parts store. If you type your serial number it will list all the parts for your computer.

  Also here is the phone number, if you want to call.

  1-800-227-8164

  By clicking on the White Star congratulations on the left is a way of saying thanks!

  I would like to know how everything goes.

  Nice day.