replace the face with a picture

Similar Questions

• How to replace a face with 11 elements.  Help, please

  Does anyone know the easiest way to replace the faces in a picture using Photoshop elements 11?

  shelleys72748355 wrote:

  Does anyone know the easiest way to replace the faces in a picture using Photoshop elements 11?

  Yes.

  1. Open the photo of B, the one you want to select the face to add to the group photo.
  2. One of the selection tools, for example the selection brush, lasso tool, to select the face. You can see a preview ("mobile dash") once the selection has been completed
  3. Go to the Edit menu > copy to copy the selection to the Clipboard
  4. Open the photo a (group photo), then go in Edition > paste
  5. Use the move tool to position the face of photography B.
  6. In the layers palette, you should see A picture as the background layer and b-side on a separate layer.

• Can satellite M70-159 - I replace the motherboard with another?

  Hello!
  The model of the M70-159-card mother K000033840 can replace another motherboard with a number K000033860?

  Thank you.

  I put t know if it s possible because I m not a technician for laptop.
  Normally, you should only replace the motherboard with the same.

  I put t know if it works. Contact a local ASP and ask for a technician. They know where the other is, and if it would work.

• Please replace the battery with the correct lenovo battery

  I have a Thinkpad L530 and bought a new battery and when I start it up I get this message (this battery installed is not supported by this system and will not charge.) Please replace the battery with the battery correct lenovo for this system

  buy a real battery. Press ESC to continue but the battery won't charge)

  I don't want to buy a new battery to another.

  I understand that this can be changed in the bios but don't know how.

  Now my battery is dead, and I'm unable to recharge it again.

  Ideas please

  
  

• How to replace the paragraph with a space mark

  Hello

  I received the contents of a manual in raster format, but each line of text ends with a paragraph mark. How to replace the paragraph with a mark space otherwise than by hand?

  In Word, this is pretty easy, but I don't see not any provision for it in the search box on 7.2 Frame.

  Yours,

  Michael F

  ========

  \p = end of paragraph

  \P = beginning of paragraph

  See: Help > keyboard shortcuts > keys for the search and replace

• Replace the hyphen with line break

  Hello
  In my application, I want to replace the hyphen with line break
  . I use APEX4.0
  I use the following javascript code:
  
  < html >
  < script type = "text/javascript" >
  function test().
  {
  var visitorName = "< br / > ';
  var myOldString = "& P2_SI.";
  var myNewString = myOldString.replace (/-/ g, visitorName);
  }
  < /script >
  < / html >
  
  I have no idea how the get executed and make javascript work... can anyone help?

  Suzi,

  I changed the code for page 1:
  I don't know that is what you want, but it works :)
  That's what I did

  1. deleted tags
  2 P1_RESULTS element created to keep results
  3. $x_Value ("P1_RESULTS", myNewString) occasion; to fill a new element

  You cannot set the value P1_S2I in dynamic Action (onchange) - it looks like the code calls herself and kills the browser

  Lev

  Published by: the on August 27, 2010 11:49

  Published by: the on August 27, 2010 11:53

• replace the characters with accent with their basic letter

  Hello
  
  I need to replace the characters with an accent with their basic letter
  
  a = > has
  n = > n
  
  I use classes of equivalence as [[= n =]] in regexp_replace, but then I need to call it for each letter. Is there a simpler way?
  
  Concerning
  Marcus

  Given that I only have the names to convert INITCAP

  It seems that you can use the binary case-insensitive or accent sorting to get the results you want so:

  SQL> with t as (
   select 'ñÉäßÑéàâ' str from dual
  )
  --
  --
  select str, utl_raw.cast_to_varchar2((nlssort(str, 'nls_sort=binary_ai'))) str2 from t
  /
  STR      STR2
  -------- ---------------
  ñÉäßÑéàâ neassneaa
  1 row selected.
  

• Replace the spaces with a sign +.

  Hello
  
  On of my items, I have a text... I want to replace the spaces with a plus (+) sign... something linke this
  
  
  Select
  text_field,
  Function_replace (text_field, "", "+") new_field
  Of
  table_A

  Like this?

  select regexp_replace('Please replace, me','[ ,-]+','+') replaced_txt from dual;
  
  REPLACED_TXT
  -----------------
  Please+replace+me
  
  Elapsed: 00:00:00.00
  

  HTH,
  Prazy

• is it possible to replace the wifi with another card?

  Hello

  I have a t400 with intel 5100 wifi card and now I want to install mac os on my laptop.

  problem is that mac os is not detecting the 5100 series of wifi card and I would like to know if it is possible to replace the current model 5100 with an old series?

  Is there any Center of service authorized in Uppsala in Sweden / Sweden for this?

  Thank you

  Limited wireless cards Lenovo Lenovo units certified to work with the brand machine. This is done through a white list in the system BIOS. Recently, I disassembled the last BIOS of T500/W500 (version 3.14 - 1: 06) and discovered the following picture of the white list. It's raw hex big endian joined with what I found by searching for the device ID's are redundant entries to change supplier codes.

  86803 B 428680111000 Intel Corporation PRO/Wireless 5350 AGN [Echo Peak] network connection

  86803D 428680111200 Corporation Intel WiMAX/WiFi Link 5150

  868036428680111000 Intel Corporation ultimate N WiFi Link 5300

  868037428680111200 Intel Corporation PRO/Wireless 5100 AGN [Shiloh] WIRELESS card

  868037428680161200 Intel Corporation PRO/Wireless 5100 AGN [Shiloh] WIRELESS card

  8C161C008C16350000 Atheros AR5007EG

  EC107281EC1020E000 Realtek RTL8191SEvB (yuck, Realtek!) I wouldn't want one of these...)

  86803 8086:423D 428680161200 Corporation Intel WiMAX/WiFi Link 5150 D

  8680840086801513 corporation Intel Centrino Wireless-N 1000

  Your T400 comes from the same range and has probably the same list. Don't forget, you can buy a Lenovo brand unit.

  Also look for a PM with additional information.

• Replace the comma with the liquid matrix code

  Hey people,

  I might not even wrong terminology, but I'm stumped on this question.

  I have a picture of an element of app web listbox that out puts the following liquid on the DETAILS page:

  "Fuel products': 'Diesel (high-speed), Premium ULP, ULP regularly."

  I am willing to spend the commas in the table with an icon of fonts, for example:

  < span class = "find the fa - fa" > < / span >

  I tried using the 'Replace' filter but it does not work. And I tried to use "capture", but there is clearly a funky coding that I completely missed. Help, please...

  {capture check %} < span class = "find the fa - fa" > < / span > {% endcapture}}

  {{it. ["Products of fuel"] | {{replace: ",", "{{tick}}"}}

  See you soon

  James - RelianceIT

  Hello

  Try {{this. [' Fuel products] | {{replace: "," check mark}}

  and let us know if it works.

  Thank you

  M

• How to replace the iPhone with iCloud contacts contacts

  I see a lot on the other hand... but I need help.  I spent hours on my reductive duplicates of MAC (2-3 each) and out Hung old addresses, etc..  I've narrowed my list of contacts from 1200 to 458.  Once I did, I have archived my new list of contacts "just in case."  When I go in iCloud on my computer, I see 458 contacts.  Large.  However, my iPad and iPhone are always a mess.  I thought that this was happening in iCloud would replace the junk on my devices.  I have read articles that said disable contacts in iCloud and it will ask you what you want to do with contacts - delete.  Yes, I did.  It has eliminated about 90 contacts and that's it.  Also, I went to all my e-mail and accounts disabled using contacts from gmail, yahoo, outlook etc.  Who does nothing either.

  Summary: What's in my account iCloud, 458 contacts, is correct.  Now, how the hell do I clean my iphone and ipad and load these 458 contacting them and get rid of the 1200-1500 in each device now?  Waaaah.   Very frustrating that there is not a global deletion that I can find.

  Please help a rookie.  MM

  Turn on the iCloud contacts for all devices

• Guide: replace the HDD with SSD, Lenovo Y480

  Lenovo
  That's how I replaced my HDD with a SSD in my Lenovo Y480. I did it immediately, so there is no user file to consider. I used a key from Lenovo recovery. Read this guide in its entirety before starting.

  Execution time: about an hour.

  Items, you will need:

  -Y480 Lenovo

  -New SSD (I chose a Mushkin Chronos Deluxe because my research lead me to conclude that it is the best available from June 2012)

  -Small Phillips screwdriver

  -Butter knife or similar to remove the HARD drive. There is not much space for your fingers in there.

  -DVD-r blank

  Step 1

  Turn on the computer.

  Step 2

  Write the number '1' on a blank DVD-R and insert into the optical drive.

  Step 3

  Press the small button just to the right of the power button. This launches a recovery key.

  Step 4

  Follow the instructions on the screen to make restore disks. I chose the factory restore option, which required three DVD - Rs. label each disc with numbers to let you know in what order to use them later. Once it is finished, place back #1 DVD into the optical drive.

  Step 5

  Physically remove the hard drive and insert the SSD drive by following the instructions below.

  1. turn off and unplug your computer, flip upside down.
  2. remove the battery.
  3. remove the access panel by removing the two screws and slide.
  4. remove the two screws that hold the hard drive carrier.
  5 remove the hard drive by lifting upward. There is a right angle SATA adapter plugged into the hard drive. This card just came out with the hard drive.
  6 disconnect the hard drive adapter and plug it on the SSD.
  7 unscrew the hard drive bracket and screw it on the SSD.
  8 put the SSD drive in the Bay, screw the support down and replace the access panel. Be sure to screw it up.
  9. replace the battery, lock.

  Step 6

  If you did not already the first recovery DVD in the optical drive, use a paper clip to open the optical drive and insert the diskette. Close the drawer, then turn on the computer to start the restoration.

  Step 7

  Select the boot drive by pressing F12 when you see the Lenovo logo during startup, and then select the optical/DVD drive in the list.

  Step 8

  Follow the instructions on the screen. The first time that I did, restoration impossible immediately, probably because of a missing partition. However, after restarting the computer by performing a battery pull, then continue to step 6 restore completed successfully.

  I have not compared this drive, but I can tell you that the Windows experience index is 7.9 and startup time is 24 seconds now. The base index is 6.8 for this system now.

  You will find that Windows has already helped TRIM. However, regular defragmentattion was still on. I think that the system restore has been disabled automatically.

  Good luck

  Matt

  I saw no option for this, and I was quite surprised, that he didn't do it automatically. I'm not an expert on everything, so what follows is a guess.

  Perhaps that if you create a partition on the SSD first, recovery will recognize and use it.

• Model: G6-1D98DX, refurbished: renovated pavilion laptop g6, replace the fan with what?

  When I powered my laptop Pavilion G6 refurbished, it gives a disturbing message on the fan turns not and the processor of cooking and automacially stops in 15 seconds. OK, replace the fan.

  By the? appropriate? HP 'Maintenance and Service of Guide' (Doc PN 649111-002), I took part BUT Guide HP, the processor heat sink is held by 7 screws... only it renovated its heatsink is a model of 4 screws, and the motherboard was ever available for 7 screws.
  How to order the appropriate and/or fan-with-heat sink fan? the fan-with-heat sink seems to be a unit

  use data created on the fan or radiator Assembly to try to find a part on google or ebay.

  http://www.eBay.com/ITM/new-OEM-HP-Pavilion-G6-G6-1000-series-cooling-fan-with-heatsink-641024-001-4-pin-/251637960612?hash=item3a96ca8fa4:g:dTsAAOSwq5lTmneN

• If I replace the control with another why DAQmx create channel once complain a false claim?

  I tried to replace the frequency by another control in the example found here complete PWM:

  http://www.NI.com/white-paper/2991/en

  However, I get the following error message:

  

  Possible reasons:

  Requested value is not supported for this property value. The value of the property may be invalid because it is in conflict with another property.

  Property: CO. Pulse.Freq
  Required value: 0.000000
  Valid values begin with: 22.300000e - 309
  Valid values ending with: 20.0e6

  Channel name: Dev1/ctr0

  Task name: _unnamedTask<10>

  My wiring diagram looks like this:

  

  If I cancel my change (i.e. I have remove the frequency control knob and turn it over to the control of the example, it works perfectly.)  I get the waveform is displayed in the oscilloscope.

  My goal is to simply use a frequency and duty cycle control knob.  How can I achieve this?

  There are two things to do.

  What I think you did now changes the scale of the handle.

  You will also need to change the values that are allowed to enter. You will do on the data entry tab in the dialog button properti.

  Uncheck the 'use default', the Minimum value limits and Maximum identical to your balance.

  Value "Response to value out of range" Coerce to both Minimum and Maximum.

  I hope this helps.
  Let me know if you have more problems.

• My printer HP LaserJet 1536dnf printer prints black pages after replacing the toner with a new one!

  I changed the toner cartridge for my printer HP LaserJet 1536dnf with a genuine HP toner cartridge and now it's printing the pages in black.  Any suggestions on how to fix this?

  Thank you!

  Hi @Beaglemom49779,.

  I see by your post that you have replaced the toner and now get all black pages. I can help you with this.

  Have you had the same problem with the printer before replacing the toner?

  It could be a hardware or with the printer fuser problem.

  If the problem started just after replacing the toner then most likely, the toner.

  Make sure that the printer is connected directly to a wall outlet. (do not use a hub or a surge protector)

  Number one cause of problems with toner.

  Check if the drum unit for damage:

  1. remove the cartridge of toner product and check that the tape has been removed.
  2. check the memory chip for damage.
  3 examine the surface of the imaging drum on the bottom of the toner cartridge.
  CAUTION: Do not touch the roller (Imaging drum) on the bottom of the cartridge.

  His fingerprints on the imaging drum can cause print quality problems.
  4. If you see the scratches, fingerprints, black on the drum, or any other damage on the imaging drum, replace toner.
  5. If the imaging drum does not appear to be damaged, rock the toner cartridge gently several times and reinstall it. Print a few pages to see if the problem is resolved.

  Please call our technical support if the there is a problem with the toner and you learn about a replacement, to the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number. Contact HP.

  Good day!
  Thank you.