replace the recovery with my own file

Similar Questions

• Satellite A300 - how to use the recovery with external DVD drive disc?

  Hello

  I bought a toshiba Satellite A300 - 15 d

  FTM the tsscorp drive that is installed in the camera no longer works (does not detect any type of media what so ever). ) need to recover the laptop, so I used a USB DVD drive to boot from the restore disc, but after that the charges of recovery console it says waiting for media in the f: drive, which is the tsscorp drive although I used an external drive to load the disc.

  What files should I edit to make it to load from the drive externally and if this isn't the solution, what do I do?

  Thanks in advance

  Hey Buddy,

  Unfortunately I think that it of not possible to use the recovery with external CD/DVD drive disc. Therefore, place the internal for use the recovery disc.
  You can get a new drive to an authorized service provider.

  But if the original OS from Toshiba is installed, you can use the function of disk recovery HARD reinstall Windows as well. Go to the advanced boot menu (F8) and select Repair my computer :)

• Can satellite M70-159 - I replace the motherboard with another?

  Hello!
  The model of the M70-159-card mother K000033840 can replace another motherboard with a number K000033860?

  Thank you.

  I put t know if it s possible because I m not a technician for laptop.
  Normally, you should only replace the motherboard with the same.

  I put t know if it works. Contact a local ASP and ask for a technician. They know where the other is, and if it would work.

• Please replace the battery with the correct lenovo battery

  I have a Thinkpad L530 and bought a new battery and when I start it up I get this message (this battery installed is not supported by this system and will not charge.) Please replace the battery with the battery correct lenovo for this system

  buy a real battery. Press ESC to continue but the battery won't charge)

  I don't want to buy a new battery to another.

  I understand that this can be changed in the bios but don't know how.

  Now my battery is dead, and I'm unable to recharge it again.

  Ideas please

  
  

• Can I combine the recovery with other Partition?

  Recently, I upgraded my Dell Inspiron to Windows 7 with the upgrade in free option.  However, I was wondering if there was a way to merge the recovery with the primary partition partition so that I can use this space with the main partition.  Any ideas?

  I don't think so, the extended Volume space can be merged to the main partition.
  Acronis Disk Director Suite allows you to merge... I had ealier. -Ramesh Kumar http://www.WindowsValley.com

• How can I buy Photo shop so that I can re-branded to Member of the team with their own username and password

  I would buy Photo shop and have it show that I can assign to a member of the team with their own username and password. I bought it once before, and it would allow only the administrator user name and password to access. would it be controlled by the cloud team account so that I can assign to a user and have all my products Adobe controlled by a single account. Photo shop will be for a single user.

  Thank you

  Doug

  Team license links that can help

  - https://creative.adobe.com/plans?plan=team team plans

  -http://www.adobe.com/creativecloud/buy/business.html

  -https://helpx.adobe.com/contact/creative-cloud-teams.html using the team

  -manage your account http://forums.adobe.com/thread/1460939?tstart=0 team

  -Team Installer http://forums.adobe.com/thread/1363686?tstart=0

• How to replace the paragraph with a space mark

  Hello

  I received the contents of a manual in raster format, but each line of text ends with a paragraph mark. How to replace the paragraph with a mark space otherwise than by hand?

  In Word, this is pretty easy, but I don't see not any provision for it in the search box on 7.2 Frame.

  Yours,

  Michael F

  ========

  \p = end of paragraph

  \P = beginning of paragraph

  See: Help > keyboard shortcuts > keys for the search and replace

• Replace the hyphen with line break

  Hello
  In my application, I want to replace the hyphen with line break
  . I use APEX4.0
  I use the following javascript code:
  
  < html >
  < script type = "text/javascript" >
  function test().
  {
  var visitorName = "< br / > ';
  var myOldString = "& P2_SI.";
  var myNewString = myOldString.replace (/-/ g, visitorName);
  }
  < /script >
  < / html >
  
  I have no idea how the get executed and make javascript work... can anyone help?

  Suzi,

  I changed the code for page 1:
  I don't know that is what you want, but it works :)
  That's what I did

  1. deleted tags
  2 P1_RESULTS element created to keep results
  3. $x_Value ("P1_RESULTS", myNewString) occasion; to fill a new element

  You cannot set the value P1_S2I in dynamic Action (onchange) - it looks like the code calls herself and kills the browser

  Lev

  Published by: the on August 27, 2010 11:49

  Published by: the on August 27, 2010 11:53

• replace the characters with accent with their basic letter

  Hello
  
  I need to replace the characters with an accent with their basic letter
  
  a = > has
  n = > n
  
  I use classes of equivalence as [[= n =]] in regexp_replace, but then I need to call it for each letter. Is there a simpler way?
  
  Concerning
  Marcus

  Given that I only have the names to convert INITCAP

  It seems that you can use the binary case-insensitive or accent sorting to get the results you want so:

  SQL> with t as (
   select 'ñÉäßÑéàâ' str from dual
  )
  --
  --
  select str, utl_raw.cast_to_varchar2((nlssort(str, 'nls_sort=binary_ai'))) str2 from t
  /
  STR      STR2
  -------- ---------------
  ñÉäßÑéàâ neassneaa
  1 row selected.
  

• Replace the spaces with a sign +.

  Hello
  
  On of my items, I have a text... I want to replace the spaces with a plus (+) sign... something linke this
  
  
  Select
  text_field,
  Function_replace (text_field, "", "+") new_field
  Of
  table_A

  Like this?

  select regexp_replace('Please replace, me','[ ,-]+','+') replaced_txt from dual;
  
  REPLACED_TXT
  -----------------
  Please+replace+me
  
  Elapsed: 00:00:00.00
  

  HTH,
  Prazy

• How to use the recovery with a new ssd disk after the death of original hard drive

  I thought I had a simple fix/upgrade for my dv5 - 2077cl.

  decided to replace the defective hard drive with an SSD. couldn't afford a 240 GB size but it's big enough for my needs.

  I installed the new drive easily and cycled through my 4 recovery disc reinstall the minimum overlap. After you delete the last record, the screen goes gray and there is a cursor in the top left corner for more than 10 hours.

  I finally it turned off and tried again two times the same results. I removed the DDI and run disk management on it from my other laptop and an external cable to remove the partiion and create a single partition. Tried to install windows xp on a disk that I own this isn't an update or restore disc thinking I might switch to windows 7 32 bit because I own and upgrade the disks also. even if it is a 64-bit system, but I do not have any disk 64-bit except the recovery disks that didn't seem to work.

  When I ran the xp it seemed to work but then I got the blue screen that said there is no drivers for the SDS (the error is as follows stop0x0000007B (0xF78D2524, 0XC0000034, 0x00000000, 0x00000000))

  So I guess I need to have a windows 7 install disk rather than the recovery discs?

  the SSD is a Silicon Power S70 240 GB.

  any suggestions?

  Recovery discs usually require a hard drive of equal or greater capacity. XP doesn't have SATA drivers Sockets.

  If you can read the Microsoft Windows 7 of 25-character license key, you can download a Windows 7 ISO file to burn to a DVD or USB flash drive. The version must match that's installed on your PC as shown on the sticker COST Microsoft fixed on the bottom of the laptop. Like Windows Home Premium.

  Links to downloads of Windows 7 ISO files:

• After the recovery with CD Satellite C660-1FE keyboard does NOT work

  Hello

  A month ago I bought a Toshiba C660-1FE. After three weeks my HD broke down. I bought a new HD from Western Digital and I replaced the broken HD. I did a recovery of my HD image, so I had to order the recovery disks of the product on the Toshiba site (3 disks, which drive 1 and 3 were the only required for installation).

  Now I have the problem that my laptop keyboard doesn't work. I am currently using a USB keyboard and a mouse to replace my keyboard and the touchpad of the notebook.

  The keyboard of the laptop works fine in the BIOS. Therefore, I hope that it's just a driver issue.

  I have:

  tried to find and install a lot of pilots since the toshiba site, no results.
  tried to change settings in the bios (usb enabled).
  tried to fix the problem by reinstalling all of the computer repeatedly.

  The keyboard seems to work until windows loads. When the system is switched on I can press caps lock and num lock and the green lights will turn on. All this stops working once windows starts is displayed.

  Perhaps another problem in Device Manager: under the graphics card, 2 subcategories have exclamation points: it says Mobile Intel (r) 4 series express chipset family twice! I can't seem to fix these with the drivers I can find either. When I check the settings I have this message (google translate since it is in Dutch):

  + Digital signature for the drivers for this device is necessary, cannot be verified. Possible after a recent hardware or software change a file that is installed signed incorrectly or damaged, or malicious software is installed from an unknown source. (Code 52) +.

  + You must restart the computer for this change to take effect. + (obviously I've tried that too)

  Can someone give me it please help? I'm at the end of my intelligence.

  Sincerely,

  Daniel

  Hello

  Keyboard works in the BIOS, it means that the keyboard material should be ok and the connection between the keyboard and the motherboard is established.

  So, what could be bad? Keyboard driver?
  Hmm, the keyboard driver is part of the Windows operating system and is installed automatically during the installation of the OS
  I would recommend following:
  Go to Device Manager and remove the keyboard point.
  You should see something like PS/2 standard keyboard
  If you see a red x next to this unit, then it means that the keyboard is disabled.
  Usually, you should be able to activate this again (in Device Manager).
  If there is no Red Cross, so I you would recommend the deletion of this keyboard in the Manager list of devices, then reboot the laptop. Usually, the operating system should recognize the device automatically deleted and should install the driver too.

  Select this check box.

  By the way: it is possible that you received a recovery disk wrong which could explain the problems after the recovery procedure

• Guide: replace the HDD with SSD, Lenovo Y480

  Lenovo
  That's how I replaced my HDD with a SSD in my Lenovo Y480. I did it immediately, so there is no user file to consider. I used a key from Lenovo recovery. Read this guide in its entirety before starting.

  Execution time: about an hour.

  Items, you will need:

  -Y480 Lenovo

  -New SSD (I chose a Mushkin Chronos Deluxe because my research lead me to conclude that it is the best available from June 2012)

  -Small Phillips screwdriver

  -Butter knife or similar to remove the HARD drive. There is not much space for your fingers in there.

  -DVD-r blank

  Step 1

  Turn on the computer.

  Step 2

  Write the number '1' on a blank DVD-R and insert into the optical drive.

  Step 3

  Press the small button just to the right of the power button. This launches a recovery key.

  Step 4

  Follow the instructions on the screen to make restore disks. I chose the factory restore option, which required three DVD - Rs. label each disc with numbers to let you know in what order to use them later. Once it is finished, place back #1 DVD into the optical drive.

  Step 5

  Physically remove the hard drive and insert the SSD drive by following the instructions below.

  1. turn off and unplug your computer, flip upside down.
  2. remove the battery.
  3. remove the access panel by removing the two screws and slide.
  4. remove the two screws that hold the hard drive carrier.
  5 remove the hard drive by lifting upward. There is a right angle SATA adapter plugged into the hard drive. This card just came out with the hard drive.
  6 disconnect the hard drive adapter and plug it on the SSD.
  7 unscrew the hard drive bracket and screw it on the SSD.
  8 put the SSD drive in the Bay, screw the support down and replace the access panel. Be sure to screw it up.
  9. replace the battery, lock.

  Step 6

  If you did not already the first recovery DVD in the optical drive, use a paper clip to open the optical drive and insert the diskette. Close the drawer, then turn on the computer to start the restoration.

  Step 7

  Select the boot drive by pressing F12 when you see the Lenovo logo during startup, and then select the optical/DVD drive in the list.

  Step 8

  Follow the instructions on the screen. The first time that I did, restoration impossible immediately, probably because of a missing partition. However, after restarting the computer by performing a battery pull, then continue to step 6 restore completed successfully.

  I have not compared this drive, but I can tell you that the Windows experience index is 7.9 and startup time is 24 seconds now. The base index is 6.8 for this system now.

  You will find that Windows has already helped TRIM. However, regular defragmentattion was still on. I think that the system restore has been disabled automatically.

  Good luck

  Matt

  I saw no option for this, and I was quite surprised, that he didn't do it automatically. I'm not an expert on everything, so what follows is a guess.

  Perhaps that if you create a partition on the SSD first, recovery will recognize and use it.

• Replace the HDD with SSD boot disk and use the disk HARD now as secondary storage

  I would like to replace my dv7 - 6143cl HDD with a SSD boot drive and using the OEM HARD drive as secondary storage.

  I have the SSD and the caddy

  I need to:

  delete the original OEM HD

  Install the SSD

  install OEM HARD drive in secondary Bay

  Install Win 7 (I don't have install disks - what is on the HARD drive in his backup partition)

  or I have to

  delete this HD

  Install the SSD

  go into the BIOS, and then assign him drive in AHCI (etc.)

  Install Win 7

  install OEM HARD drive in secondary Bay

  etc.

  I want to dual-boot, if possible, but I think that the second HD (start-up disk) does not start, even if I change the settings in the BIOS

  is this true?

  Pavilion dv7 - 6143cl

  I7

  8Gb

  Win7 (64)

  Thank you very much

  Hello:

  Your BIOS is set to AHCI (or RAID) by default. It cannot be changed.  Look in your device manager and in the IDE ATA/ATAPI controllers section, look to see if there is a controller SATA ACHI he.

  If so, you have an AHCI BIOS default.

  If you go further down the line in Device Manager and see a section of storage controllers, click on that, you would see a SATA RAID controller and your BIOS is set to default RAID.

  I don't have your model laptop so I don't know if HP has implemented some models double disk RAID or AHCI.

  So... First, copy your original C:\ drive SWSetup folder and save that to a portable hard drive. That must contain all the files installation for the drivers and the software provided with your PC. You can search this folder for programs that you may want to reinstall after your new SSD drive HARD primary.

  To install W7 on your SSD, check your own install of W7 disc.  Here's how:

  If you can read the Microsoft windows 7 25-character product key, you can download simple Windows 7 ISO files to burn on a DVD for the version of windows that is installed on your PC, and which is listed on the Microsoft COA sticker on your PC case.

  Burn the ISO with the option to burn the ISO on your DVD burning program and burn it at the slowest possible speed that will allow your program. This will create a bootable DVD.

  Or use the installation of Windows 7 USB/DVD tool to compile the ISO file that you download from Digital River. Link and instructions below. You need a 4 GB flash drive to use the USB compilation method.

  http://www.microsoftstore.com/store/msstore/HTML/pbPage.Help_Win7_usbdvd_dwnTool

  Use 25 characters on the PC product key to activate the installation.

  The key will activate a 32 or 64 bit installation.

  Then go to the support of the PC and driver page to install the drivers you need.

  Link to downloads ISO of W7 is below.

  http://www.mydigitallife.info/official-Windows-7-SP1-ISO-from-Digital-River/

  Can't answer your question on the dual boot as I never did before.

  Paul

• Re: Satellite Pro C660 - how to do the recovery with command prompt disc?

  I have a brand new Pro C660 of Satellite. It worked fine for a day, now it will not load windows. I don't have to create the recovery disks, as I only had a few hours (Yes, Yes, I know, should have been the first thing I did). All data are present (but backed up just in case USB) and I can see the folder HDDREcovery with all data intact. However, I can't run the application to create recovery discs. Does anyone know how to extract the images and create the media using only the command line? (I can go into command prompt by booting from the Windows 7 disc a friend). All options fail own laptop startup disks. It says 'Windows does not load' and I try startup repair, but it detects no error. Any help/thoughts on this will be greatly appreciated!

  Hey,.

  It of not possible to create the drive with command prompt recovery. You must use the Windows Toshiba Recovery Media Creator.

  Now it s too late for you, but you can order a disc here:
  https://backupmedia.Toshiba.EU/landing.aspx