Express FieldPoint

Similar Questions

• Replacement express VI to control FP-1000

  Dear members,

  I have an old field Point 1000 unit I want to continue to use for a simple control valves.  However, I wrote the original program of VI for the unit back in 2009 and the original express VI used to create the program is no longer in the following Lab View 2011.  Since I don't use a lot of Lab view, I need to relearn much of the interface format.

  I've attached a screenshot of the current VI.   Could someone give me a pointer on how to replace the express VI of fieldpoint?

  Thank you

  Yes - you need to install the FieldPoint LabVIEW drivers are supported.  This should be on the disk device drivers provided with LabVIEW 2011, or you can download it from: http://joule.ni.com/nidu/cds/view/p/id/2587/lang/en.  I don't know if FieldPoint installs by default when you install device drivers, you may need to select more precisely.

• Problems of expression lookOut

  Hello guys,.

  I met a very strange situation today.  I created an expression in a file on the server which then be used for another calculation.  To be sure my expression was working fine, I dragged the expression of a Panel to see if I could get a number, and I did.  The strange thing is that expression was X out as if there was no link, but my number has been updated again.  I could see my number correctly changing from top to bottom, but the just X out.  I tried to restart the server is not available.  I guess LookOut could take the good parts and leave the bad output that resulted in the X.  However if something in my expression was wrong (such as typing errors), LookOut wouldn't even take it at all.  I tried to break this long term piece by piece, and every single one was working fine. What would be the problem here?

  I tried to create an expression = Pot1.value + FieldPoint1.AI000.00.

  The FieldPoint module does not exist. Then, I got an alarm on the FieldPoint1 object.

  I saw the X on the expression, and when I decide to Pot1, the value of the expression changes.

  So, it looks like the same behavior. Take a look at the expression, makes it read all the data object of the pilot?

  Another way is to replace each part of the expression with a constant value one by one.

• Airport Express

  I have an old airport express (used as an extender) and a Comcast cable modem. In order to get a signal on my iPhone (AT & T), I had a microphone AT & T cell. I can't use the microphone cell as there is only a single port ethernet on the modem. If I buy a new Terminal Airport Express or extreme, either will work as an Extender of the internet to my computers iMac so that boost the signal of my iPhone?

  If they both work (see above), port (WAN or LAN) must be connected to the extension of the computer and that for increase of cell signal? Thanks for your help.

  I have an old airport express (used as an extender) and a Comcast cable modem.

  Extending Terminal AirPort Express? What is the brand and model of the cable modem supplied by Comcast?

  In order to get a signal on my iPhone (AT & T), I had a microphone AT & T cell. I can't use the microphone cell as there is only a single port ethernet on the modem. If I buy a new Terminal Airport Express or extreme, either will work as an Extender of the internet to my computers iMac so that boost the signal of my iPhone?

  If your modem is a simple modem, an AirPort base station would work. For the extension, the 'old' AirPort Express should be a 802.11n model if you want to do it with a wireless connection between base stations.

  By "restart my iPhone signal" If you are referring to his cellular signal, then no.. Only the MicroCell can do that.

• Airport Express, Time Capsule and Airport Express using the same network

  Just moved into a new House and this is what I install.  I have 7 Port wired into the House.

  Closet of network in the Garage:

  • Cable modem
  • Airport Express
  • netgear switch 8 ports
  • It works pretty well.  All my wired connections work fine.  Wireless is quite good but cove not enough of space in my house.

  Think about adding my airport express capsule of time in my office - plugged into one of the hard wired connections.  Who works AND let me wish the WIFI?

  Thank you!

  Yes fine, assuming that first test you the Ethernet port in the office by connecting a computer (with WIFI disabled on the computer) using a spare Ethernet cable runs to ensure that the computer can get a good connection in this way.

  Put the airport Time Capsule to create a wireless network that uses the exact same wireless network name and password in your existing network. Apple installation "Wizard" automatically configure airport Time Capsule in the correct setting of the Bridge Mode for the device.

• Trying to connect a computer to the lan port Aiport Express "auto assigned IP address"

  I am trying to connect a computer to the lan on my Airport Express port. In preferences, it says "status: connected, Ethernet has an assigned IP address and won't be able to connect to the internet." Any suggestions?

  An "auto assigned" IP address indicates that your computer could not find or negotiate with a DHCP server to obtain an IP address appropriate for network access.

  It should be more on your network to provide assistance if you need it. For example, is the terminal of AirPort Express the only router in the current configuration of your network? What exact model do? What is the brand and model of your modem Internet?

• Airport Express (1st generation) not connect to iPhone 6 iOS 10.0.2

  I am trying to connect and listen to music from my iPhone 6 iOS 10.0.2 through the music app. My phone does not see the Airport Express Terminal more. All I see is my Apple TV. I can connect to the Airport Express terminal when I use iTunes on my computer. My iPhone is used to connect to the Airport Express Terminal.

  I checked my Airport Express for the updates and it is updated in accordance with the programme of AirPort and PC utility App.

  AirPort Express (1st generation)

  Version: 7.6.7

  I also tried to restart the AirPort Express.

  Any ideas on how to make of this connect on my iPhone?

  Thank you!

  Hello...

  Try a reset > reset an airport base station FAQ - Apple Support

• iPhone 6 s - how to remove hidden VPN Express app?

  A few days ago, I received a notification under the name of VPN Express app wanted access to my location information. I had never ordered or installed such an application and declined. The VPN Express App then retired to the background. I thought that I would remove just but discovered it was hidden somehow. If I ask Siri to open it, it opens. How can I find and remove hidden apps? Similar experiences? Anyone know what is happening with this app?

  Use the Spotlight search, it will show where the app.

• Configure Airport Express with D-Link router

  I am currently using a router D-Link with my MacBook. I want to use Airport Express plug my MacBook on my amplifier. When I tried to set up the Airport Express, Airport utility can't find it. I can't connect the Airport Express Terminal to the D-Link router by ethernet cable, because the amplifier that I connect it is too far from the telephone jack.

  You use the wireless bridge mode... what apple being different named wireless client mode.

  See AirPort Express: what is client mode?-Apple Support

  It is the oldest document but seems to be more up-to-date.

  AirPort Express: How to join an existing client mode - Apple Support Wi - Fi network

• Cannot send expressive messages in iOS 10

  I got the iPhone 7 the day that it came out and while I can receive expressive messages from other people as the confetti/balloons, I myself can not send them. The option "Reduce the Motion" is not on and I tried it turning on and off without success. I tried to hold the blue Send button to access the menu but nothing shows up. What I am doing wrong? Is the software defective?

  Tactile 3D works on your device? You only turned on? See this document to support the messages and animation. Understand that this only works with iMessage, messages in a blue bubble. Use effects of message with iMessage on iPhone, iPad and iPod touch - Apple Support

• How to document iMac to my apple tv 2, but sending audio to the Airport express connected to my hifi

  I have an iMac, a macmini an express airport. I want to send 720 p video to the Apple TV 2 iMac (or macmini) but send audio to the express from the airport which is connected to my stereo. If the apple TV 2 will serve as a video receiver connected to my projector on the ceiling. (I don't have a way to use a hdmi cable). This is the reason why audio must be sent to the hifi differently.  Alternatevely because the macmini is connected by USB cable to my hifi (to my dac), perhaps there is a way to send audio from a movie to the stereo through audio external USB card (it is the dac) while reflecting the macmini for the Apple TV 2...

  in iTunes, you can select more then 1 speaker output could be the express and then mirrored to the appletv in the manner of STDS, if is not in iTunes then I think that you need a third party such as the wing option

• Siri on macbook with belkin express dock

  When I use the thunderbold2 express hd on my macbook pro Siri dock will not work. He is unresponsive to the microphone. When the docking station is not connected SIRI will work.

  Hi aartfromdriebergen,

  I understand that, as soon as you connect your MacBook Pro to your dock, Siri ceases to be able to hear. In this case, it seems that your input device may change (in system preferences > Sound > entry or in system preferences > Siri) when connecting to your dock.

  To check, connect to your docking station and check to see which device is selected by opening the Apple menu > System Preferences, click sound, and then click Enter.
  macOS Sierra: adjust the settings of your computer's audio input

  https://support.Apple.com/kb/PH25417

  If you see one entry other than the built-in microphone, you can set Siri listen only through an input device. Yet once in system preferences click on Siri, then replace automatic microphone by internal mic input. This will keep Siri listens on the microphone if your dock offers an entry which is automatically tilting your device to input in the system preferences.
  

  If Siri seems not to hear you talk, check your selection of micro in the Preferences of Siri.

  Use Siri on your Mac.
  https://support.Apple.com/en-us/HT206993

  See you soon!

• Airport express appears is not on the iPhone, macbook pro

  My express airplay airport appeared on iTunes (macbook pro with El Capitan), but it does not appear on my iPhone (6 s more with the last update iOS 10.0.2).  I have an old iPhone (iOS 9.3.5) 5 c and airtime appears that iPhone.  Don't know why I can't see it on my main iPhone, can not see on macbook pro on option of airtime on the menu bar top-side wifi unique display and clock are located.   On macbook pro if I open iTunes it appears through the iTunes program.  I restarted all my routers, modem, computer and telephone, still no luck.  Any suggestions to find my airplay?

  I solved this, new ios10 a little goofy.  See this link: Re: problem airplay ios 10

  Still not listed is not on my macbook pro well.  If I go into the audio output on computer settings I'm able to find, very strange.

• Can I use an old station Airport Express to extend your network using a new Airport Express Terminal?

  I had an old Airport Express station and wanted to exchange for a newer version and use the old ones to expand the range in our House. Is this possible?

  By 'old' are you referring to the AirPort Express (model A1084) to 802.11 g? If Yes, then you won't be able to use it to extend the latest Express with a wireless connection between them.

  However, you can use it in a roaming network configuration, which would force base stations to be connected by Ethernet.

• Problem with LAN Express airport

  Hello

  I recently bought an Apple AirPort Express router and I have several problems using the Ethernet with the most active airport. The thing is with my old router, I could have been connected to the ethernet cable, while at the same time connected with a LAN cable to my Macbook (end of 2015). The old router would have generated a wifi connection, but at the same time, would have enabled internet connection by cable to my Macbook without the active WiFi. People could use WiFi at home, but the Macbook would be connected to the internet by cable (lan cable connected to the router)

  My question is how to turn on a cable connection on my Macbook using the AirPort Express LAN cable, while at the same time, keep WiFi active. Currently, I have the ethernet cable connected to the airport and cable Lan also connected to the airport and the Macbook, but the internet will not work unless the WiFi is active. I would like to turn off the WiFi on the Macbook and always have an internet connection through the LAN cable that is connected between the AirPort Express device and Macbook.

  Thank you

  My question is how to turn on a cable connection on my Macbook using the AirPort Express LAN cable, while at the same time, keep WiFi active.

  Is the Terminal AirPort Express the only router in the current configuration of your network? No matter, what is the brand and model of the modem Internet you have the Express directly connected by Ethernet? ... or is the Express connected by Wi - Fi to the modem?