Replaced motherboard and later unknown device

Similar Questions

• G555. Need drivers for Windows XP for SM Bus and another unknown device.

  I try to install Windows XP on my G555. I had all the other drivers, but can not find the drivers for SM Bus and an unknown device. And what is this device?

  The second problem is that, after I installed all the drivers, the card reader disappeared. It's there after you install Windows XP, before I install the drivers.

  Thank you very much.

  A Felix

  All drivers I have installed is. C:\DRIVERS. Discover yours. In the Device Manager the only smbus I found was ATI.

• Satellite C660-12V and WXP - unknown device

  Hi all

  I've just intsalled WinXP on Satellite C660 - 12V PSC0SE. I installed all the drivers already, but still I have a problem with a single element:
  ACPI\TOS6205\5 & 2730DB79 & 0
  What is it? I can't find the drivers.
  It's new C660 without operating system

  Help, please

  Use http://www.pcidatabase.com/index.php for the identification of unknown device

  TOS6205 implement provider search option and you will know which device needs to be installed.
  If you need further assistance please let us know.

• Replacing motherboard and processor, now Vista will not activate

  my computer wouldn't activate my windows vista accout... He told me that the product key is already in use... I understand the confusion I had to replace my motherboard and CPU... so my setup has completely changed... but I can assure you it's me the original owner of the product key and it is the same just different computer mobo and cpu...

  * original title - I had to replace my motherboard and processor and not vista won't activate my copy of windows *.

  "meldog" wrote in message News: 44b68b63-556f-44ae-a541-541bef262101...

  my computer wouldn't activate my windows vista accout... He told me that the product key is already in use... I understand the confusion I had to replace my motherboard and CPU... so my setup has completely changed... but I can assure you it's me the original owner of the product key and it is the same just different computer mobo and cpu...

  If your Vista came pre-installed, so it's an OEM license - and replace the motherboard except in conditions of warranty is not allowed. Notice of MS, the card mother IS the computer
  You will need to purchase a new FULL version commercial license and edition of Windows you want - from the motherboard is (probably) new, it must run Windows 7 with happiness.
   
  
  --

  Noel Paton | Nil Carborundum Illegitemi | CrashFixPC | The lazy three fingers

• [LATITUDE PROCESSORS E7450 AND CONTROLLER] Unknown device ACPI

  Hello

  IM using an E7450 processor and controller LATITUDE and have problems with an unknown device:

  

  Does anyone know what driver is missing?

  Hi Alexbo,

  Ask you to provide the serial number of the system, the operating system installed on the system as well as the version (32-bit or 64-bit) and the region to which you belong (via only private message) so that I can check the system specifications to help you with the link for the driver.

  Waiting for your response.

  Sincere greetings,

• Activation issue when replacing motherboard and processor, but no disc?

  Hello everyone. I replace my card motherboard and CPU. moving to 99 X and 5960 x. I will not replace my C drive. It's a free upgrade for Windows 10 so I can move it. What do I have to disable my subscription CC before moving and then reactivate after have replaced the card motherboard and CPU. Thank you Roman

  Hi Rkenosha,

  Hello everyone. I replace my card motherboard and CPU. moving to 99 X and 5960 x. I will not replace my C drive. It's a free upgrade for Windows 10 so I can move it. What do I have to disable my subscription CC before moving and then reactivate after have replaced the card motherboard and CPU. Thank you Roman

  I don't think it's necessary.

  But after getting the card mother and processor changed, you may need to sign in again.

  Sign in with your Adobe ID and password.

  Thank you

  Ilyes Singh

• I need to replace my replacement motherboard and have the Creative Suite CS6

  I am under Creative Suite CS6 and my PC has developed a sense of fault, I need to replace my motherboard (and probably the RAM). Case, CPU, graphics card and all hard drives will remain the same.

  Creative Suite will simply work on the new series to the top or I have to deauthorise it on the old computer before I have to replace the motherbaord then it will allow once the repair is complete?

  Thanks for your help.

  Just to be sure I would turn off before in the case where it does not register when the machine is back.  If it still usable so you just need to reactivate it.  If she fails to reactivate and works correctly, you can uninstall, use the Cleaner Tool CS and reinstall and don't face the customer to recover a lost activation.

• Replacement motherboard and cannot off mode of manufacturing with ALT + F

  I bought a new motherboard of Dell (OCT103) for the Dimension E521.

  I received the card mother, screwed into the computer and everything works fine. But...

  The motherboard has been delivered with the method of manufacturing activated. Now, I have the problem, that the rest in manufacturing systems, although I entered in the new issue of servicetag already many times. I started my computer several times, but there is no chance to start in normal mode. There is always a message at end of boot, that "the system works in manufacturing mode. "Press ALT F to operate in normal mode. By pressing ALT + F for now removes the servicetag in the BIOS again and all settings are reset. Is this normal way?

  On the homepage of Dell, I found information, I have to boot into the BIOS setup and it press ALT + F in the main configuration to disable the mode of production. But when I press those buttons I got a beep, nothing more.

  Please can you tell me how to disable this mode correctly and permanent.

  Thanks for a response

  Hello

  I recently got a new machine (inspiron 660 s) from dell.

  The start screen always displays "mode of production", even though I entered the serial number.

  I tried a lot of keys to try to return to the normal mode, but not worked.

  Finally, I pressed 'Load Defaults' in the Menu output then output parameter of the BIOS.

  Everything became normal. A Dell Logo appears on startup. (Later, of course, I can change all the parameters :)

  Hope this helps!

  Mario :D

• A22m cannot locate correct ethernet, serial port and an unknown device drivers.

  Just picked up an old A22m and no drivers on the support site seem to want to work for it.

  I'm looking for additional identification for the laptop and the only thing I can find on the guy: 2628 - ttu

  Features of the laptop:

  1 GHz, 384 MB, 28 GB

  Windows 2000

  I appreciate all help.

  Welcome to the forum!

  After downloading the drivers, have you unpacked in the appropriate directory, for ethernet, it should be something like: C > drivers > win > Ethernet...

  It's the right driver for your computer's Ethernet:

  http://www-307.IBM.com/PC/support/site.WSS/document.do?sitestyle=Lenovo&lndocid=MIGR-4V3MN7

  I hope this helps.

• Unknown device on network adapter between the laptop and the wireless router

  I am running windows 7 64 bit on a laptop computer connected wireless to the router and internet.  The router is Linksys WRT160N connected to the internet.  The map of the network, there is a question mark device unknown between the laptop and the router.  However, I still have access to the internet.  In terms of network, if I hover over the laptop, it does not show an IP address.  It only shows the name of the computer and its MAC address.  Any help would be appreciated.

  Solved my problem.  I checked the button of the IPv6 protocol in the properties of a network connection on the laptop, and now I can see it's the IP address and the unknown device has been replaced by a switch and hub which is part of the router.   I do not uncheck the button IPV4.  I'm guessing that it is a bug in Windows 7 that you need to cut of ipV6 Protocol when you have a Win XP computer on the network if you want to see a map of own network.  As I said before, everything worked before, so this seems to be a cosmetic fix only.  I see that my shared files on the XP computer appear faster after a reboot.

• Satellite A300 and Vista 64-bit - unknown and non-functional devices

  I have the Satellite A300-1Gn
  Here are some features:

  Technology
  type: technology Intel® Centrino® 2 processor with processor Intel® Core 2 Duo P8400, clock speed of the Intel® PM45 Express and Intel® WiFi Link 5100 chipset: 2.26 GHzFront Side Bus: 1066 MHz2nd level cache: 3 MB
  
  Operating system
  GenuineWindows Vista® Home Premium 32 - bit Edition (pre-installed, Toshiba-HDD recovery)

  
  
  System memory
  standard: 3 072 (2 048 + 1 024) MB
  maximum extension: 8 192 MBtechnology: DDR2 RAM (800 MHz)
  
  Hard drive
  capacity: 320 GB
  Certification: S.M.A.R.T. disc rotation: 5 400 rpm
  
  DVD Super Multi (Double Layer) drive
  Compatibility: CD-ROM, CD - R, CD - RW, DVD-ROM, DVD-R, DVD + R, DVD + R (DL), a DVD-R (DL), DVD - RW, DVD + RW, DVD-RAM
  Maximum speed: read: 24 x CD-ROM, 8 x DVD-ROM / write: 24 x CD - R, 4 x
  CD - RW, 10 x CD - RW, 16 x CD - RW, DVD-R 8 x, 6 x DVD-R (Double Layer), the HS
  6 x DVD - RW, 8 x DVD + R, DVD + R 6 x (dual layer), 8 x 5 x DVD-RAM, DVD + RW
  type: DVD Super Multi (Double Layer) drive
  
  Display
  "size: 15.4"
  type: Toshiba TruBrite® WXGA + TFT high brightness display resolution internal: 1 400 x 900
  
  Graphic adapter
  Manufacturer: ATI
  type: ATI Mobility Radeon™ HD 3650 supporting HyperMemory™ technology memory amount: 512 MB dedicated VRAM (up to a total of 2 302 MB available)
  graphics memory using HyperMemory™ with 4 GB of system memory technology)
  memory type: GDDR2 video (500 MHz) bus RAM (resp. RAM video and system memory combined) connected: 16 x PCI Express...

  I installed windows vista 64-bit to try it, and I started to download all the drivers I could find from Toshiba site... But I still have in my device under 'other devices' management 3xbase system of the device (who report that they do not work) and an unknown device "it works ok same woithout this, but my HD movies are restless...
  Is it posible to thath I missed something... Bluetooth, wireless, sound, games, camera, mic, etc., everything works...

  Thanks in advance guys (or girls);...

  Hello

  Have you installed the right graphics card driver?
  The Sat A300-1GN belongs to the PSAGCE series.
  I checked the page of the Toshiba driver and there are two pilots;
  I think that you should choose the ATI driver 8.477 display because this driver supports the Mobility Radeon HD 34xx/36xx chips.

  Other base system devices could be Bridge Media slot (for SD cards), touchpad, HDMI Control Manager.

  I didn't find these drivers 64-bit on Toshiba page. Maybe you should choose some drivers for Vista 32 bit

• How to implement by scanning image for Blackberry 5.0 and later version OS devices?

  Hi all
  I need to develop the functionality of drag in an application. To do this, I added five bitmapfield in five different verticalfield Manager and these five verticalfiled have been added in a horizontalfield with the Horizonatal Scroll property manager. And try to implement features of shot using Touch events. Code below works for Blackberry OS 5.0 devices, but its does not work in Blackberry 6.0 and later OS devices.

  protected boolean touchEvent (TouchEvent message)
  {

  try {}
  int x = message.getX (1);
  int y = message.getY (1);

  int eventCode = message.getEvent ();
  if(eventCode == TouchEvent.Down)
  {
  DX = x;
  DY = y;
  }
  Another yew (eventCode is TouchEvent.UP)
  {

  UX = x;
  UY = y;

  disX = Dx - Ux;
  disY = Dy - Uy;

  If (disX > (Display.getWidth () / 3) & this.index)<>
  {

  If (this.index<>
  This.index ++;
  vfmImage [this.index] .setFocus ();
  System.out.println ("disX:" "+ disX +" different: "+ (Display.getWidth () / 3) +" Index: "+ this.index);

  }

  ElseIf (disX < display.getwidth()="" -(display.getwidth()="" +="" display.getwidth()/3)="" &&="" index=""> 0)
  {

  if(this.index>0)
  -This.index;
  vfmImage [this.index] .setFocus ();
  System.out.println ("disX:" + disX + "different:"+(Display.getWidth()-(Display.getWidth() + Display.getWidth () / 3 ")) +" Index: "+ this.index);

  }
  on the other
  {
  if(index==0)
  {
  vfmImage [1] .setFocus ();
  }
  on the other
  {
  vfmImage [this.index - 1] .setFocus ();
  }

  vfmImage [this.index] .setFocus ();

  }

  }

  }
  catch (System.Exception e)
  {
  Dialog.Alert ('catch');
  e.printStackTrace ();
  }
  Return super.touchEvent (message);
  }

  Thank you
  Sylvie

  Hello

  Use this api
  http://www.BlackBerry.com/developers/docs/5.0.0api/NET/rim/device/API/UI/extension/component/picture...

  Kind regards
  pp

• Satellite L300 PSLBGE - unknown device in Device Manager

  Hello!

  I would be very grateful for any help/tips if anyone has an idea what to do...

  My friend has the laptop mentioned above (w/o OS preinstalled) and we can't get the graphics card work properly - situation is the following

  (1) mobile intel 4 series express chipset family, and an unknown device with an exclamation mark in Device Manager
  (2) both are on the same PCI BUS 0, device 2?
  (3) intel does not work because there is no free resources (I should remove the unknown device?) to work with
  (4) HW ID for the unknown device is pci ven_8086 & dev_2A43 and intel pci ven_8086 & dev_2A42 (so basically the same, right?)
  (5) Finally, and most importantly, if I go to the desktop-customize-advanced (first of all no resolution 1280 * 800) I see under adapter type:. Exactly, nothing... under properties, it appears: device not plug and play, Super VGA and under driver, I see just the status and the ability to stop, off, automatic, ask... the device at startup... If I turn it off, the screen just does not shine when the laptop is turned on...
  Any ideas? I'm insaneeeeee...

  Vista Home Premium, all other Toshiba SW installed (value pack, intel BIOS 1.9, etc. - maybe the BIOS did it?)

  Thanks in advance!

  PS maybe SP1 I now install help?

  Hello

  Wait a minute: I checked the Vendor ID and Device ID on www.pcidatabase.com and this is the graphics card Intel. So I think that's the reason why you can t change the resolution of the screen.

  I guess you forgot to install the display driver. See the Web from Toshiba site because here you can download the driver:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  After that you should t have no exclamation point.

  You can install SP1 for Vista, but that does not solve the problem with the missing display driver. But you should install it because it contains a lot of updates to security, they are important. In addition, I recommend to install SP2 for Vista.

  Good bye

• Satellite Pro A100 - unknown device TOS1900

  I have a toshiba satellite pro a100. It came with XP installed.

  I recently installed a bigger hard drive and updated to Vista Ultimate (32 bit) operating system. I downloaded and installed all the drivers on the toshiba site but I still have a 'unknown' device in the device with a yellow exclamation point Manager, it details tab it says:
  'ACPI\TOS1900 '.
  * TOS1900»

  Can someone please tell me what this device is, and where can I find the right drivers?

  Hello

  Have you installed the Toshiba value added Package?

  Isn't it? To do this, and this unknown device should disappear

  Welcome them

• Satellite A500-138 'unknown device' in Windows 7

  Hi all

  I am the owner of a Satellite A500-138 - Part Number: PSAM3E - 013014H 2.
  I just finished the upgrade of the o/s from the horrible vista to Windows 7 Ultimate 64. Update was smooth. Drivers and utilities were easily on your website and install it correctly. Almost everything seems to beworking OK...
  I find myself with 2 numbers:

  1. the watch still an "unknown device" Device Manager
  Details of the device shows hardware IDs of ACPI/ENE0200 and * ENE0200
  What is this and where can I find the driver?

  2. I can't find the Manager of LAN/WLAN cool utility that came with vista.

  Thanks in advance,

  Friend

  Hi friend,

  Have you checked the device ID and the unknown device provider? You can check in the properties of the device.
  Maybe it s Bluetooth adapter if your laptop is equipped with such a

  Regarding the WLAN tool, I think you mean ConfigFree. You can download it on the Toshiba site. Maybe the version of Vista also works on Windows 7.

  Good luck! :)