Replacement of the inline in the Message notification

Similar Questions

• I have to type the message notifications to play on Apple Watch

  This happened only recently, but before, each time I received a text alert on my Apple Watch, it was show and then move to show the message itself.  Now it shows just who she is and does not make the message.  I type the message to read it?

  I unpaired and hard reset my iphone 6 and shows, but it still happens!

  Any advice much appreciated

  Hello

  Check the following settings:

  -On your iPhone, in the application of Eve, go to: My Watch (tab) > General > wrist Detection - turn on.

  -On your iPhone, in the application of Eve, go to: Watch My > General > screen Wake > Wake screen on wrist lift - switch on.

  With the watch on your wrist and (if you have the password activated) unlocked, to read a new notification Messages in their entirety, you can then either:

  -Hold your wrist immediately at the front desk (you will see a summary) and Dungeon he triggered a few seconds (it will then open in its entirety), or;

  -Tap a notification registered within the Notification Center.

• Origin of the Message Notification "a technical review processor error has occurred?

  Our installation is v6.1.0.3 and we have received notifications every night with purpose "a record review processor error has occurred."  There seems to be two different results of message and I would like to know if anyone knows what causes this type of notification.  We do not find correlations to the actions of the users when these messages are sent by servers.  Thanks for any advice.  -BeckieC

  == == TradeMaterialSpecRelationship message

  SPEC CPU review [SpecRevisionProcessor: Name = TradeMaterialSpecRelation, SpecRevisionRetrieverFactory = Xeno.Prodika.GSMLib.CustomAssociations.Service.Retrievers.LatestIssueByTagsCommonSpecRetrieverFactory, SpecRevisionReplacerFactory = Xeno.Prodika.GSMLib.CustomAssociations.Service.Replacers.TradeMaterialSpecRelationshipReplacerFactory] error occurred: ORA-01013: user has requested cancellation of the pending operation: SELECT DISTINCT (container. PKID)

  Of

  container gsmTradeMaterialSpecRelation

  INNER JOIN specSummary ON container.fkMaterialSpec ss is ss. SpecID AND container. IsCustomAssociation = 1

  INNER JOIN SpecSummary on ss2.specnum = ss.specnum AND ss2 ss2. IssueNum > ss. IssueNum

  INNER JOIN gsmWorkflowActivityTemplates Act on act.fkProcessTemplate = ss2.fkProcessTemplate and act.fkworkflowstatus = ss2. SpecStatusID

  INNER JOIN GSMWFExtendedBehaviorJoin on act.pkid = behaviorJoin.fkGSMWorkflowActivityTemplate behaviorJoin

  Behavior of the INNER JOIN behaviorJoin.fkExtendedBehavior = behavior.pkid comLWFExtendedBehaviorTemplate

  WHERE

  behavior. BehaviorID (4) at Xeno.Data.XDataQueryIsolated.execute (string instruction)

  at Xeno.Prodika.GSMLib.CustomAssociations.Service.Retrievers.LatestIssueByTagsCommonSpecRetriever.RetrieveContainerObjectPKIDs)

  at Xeno.Prodika.GSMLib.CustomAssociations.Service.SpecRevisionUpdateServer.OnTimer (Object state)

  == == FormulationInputs message

  SPEC CPU review [SpecRevisionProcessor: Name = FormulationInputs, SpecRevisionRetrieverFactory = Xeno.Prodika.GSMLib.CustomAssociations.Service.Retrievers.LatestIssueByTagsCommonSpecRetrieverFactory, SpecRevisionReplacerFactory = Xeno.Prodika.GSMLib.CustomAssociations.Service.Replacers.FormulationInputReplacerFactory] error occurred: connection request has expired at Oracle.DataAccess.Client.OracleException.HandleErrorHelper (Int32 errCode, OracleConnection conn, IntPtr opsErrCtx, OpoSqlValCtx * pOpoSqlValCtx, ByVal src, String, Boolean Bcheck procedure)

  at Oracle.DataAccess.Client.OracleException.HandleError (Int32 errCode, OracleConnection conn, IntPtr, Object src opsErrCtx)

  at Oracle.DataAccess.Client.OracleConnection.Open)

  at Xeno.Data.XDataObjectConnection.Open)

  at Xeno.Data.XDbConnectionPool.internal_lock (link IXDataObjectConnection)

  at Xeno.Data.XDbConnectionPool.getConnection)

  at Xeno.Data.XDbConnectionPool.getConnection (Int32 timeOut)

  at Xeno.Data.XDataQueryIsolated.execute (string instruction)

  at Xeno.Prodika.GSMLib.CustomAssociations.Service.Retrievers.LatestIssueByTagsCommonSpecRetriever.RetrieveContainerObjectPKIDs)

  at Xeno.Prodika.GSMLib.CustomAssociations.Service.SpecRevisionUpdateServer.OnTimer (Object state)

  It's to do with the latest revision get features.  This service replaces relations specification when a new approved revision is.   What is replaced by this service is controlled by the icons of lock next to the name of the specification. You can find more information about these services on page 1-22 of the configuration guide.  If you do not use the latest revision get, you can configure this feature off the coast.  I don't know what is causing the connection request time out, but I hope this will help a little.

• Message notification is not displayed after you read the message and minimizing Skype for the next 5 minutes

  Hello

  We are a company of about 30 employees. We all use Skype. We are experiencing a problem where after reading the first message and minimize Skype, we do not receive the message notification until 5 minutes. This becomes painfully irritating that we will have to go check manually on all our messages to see if the other user has responded or not.

  Any help or guide in the right direction would be much appreciated

  Found the problem. Server a five minutes late, having first message "5 minutes" customers of time machine. Thus causing a space of 5 minutes of no message.
  
  Set the time on the server and re - sync all customers. 100% working now

• See the Message of Notification area using javascript...

  Hi all..
  
  Apex Version: 4.1
  Database: 11g
  
  Please help me with the following question.
  If we have a 'validation' on a page...
  
  Ex: If the salary > 3000 display a validation message in the "Notification area".
  
  If we hit a button on the page will be processed and shows the
  message in the notification window.
  

  Is that possible to have the same functionality ""without submitting the page""?

  I mean.. with javascript or jquery and "" onblur"" event, if the user
  Then enter the salary > 3000 '"show dynamically the message notification and the region (with the help of jquery)'"
  
  If we have several mistakes, we have to "' the list'" in the same way as it does with "'SEND" ".
  
  I'm trying "" not to SUBMIT"," the page, but get the same functionality with JavaScript.
  
  Thank you

  It works now that the single quotes are ignored. The problem is that I put emphasis on the field of P1_TEST after the displayed error. If you try to close the message before you fix the value of the field, and then you raise the onblur event that makes the message box reappear (so look as if it had never closed).

  I changed it to give to the text element a background instead of focus color and it works very well. When the user corrects the value, the background color back. In any case, hope this helped. I put in the comments to help you see where I made the changes.

  Walter

  Published by: WannaRock on April 20, 2012 13:52

• What is the function of message notification?

  Hello
  
  Can someone tell me what is the function of message notification? How to create that and which affect us?
  
  SKG

  Subsequent to the notification function is a PL/SQL procedure according to the same standards of API required for the activities of the function.

  The workflow engine executes the function of posterior to the notification in response to an update of status of the notification the notification is pronounced. For example, you can specify a function of subsequent to the notification which runs when the recipient of the notification sending or transmitting the notification. Subsequent to the notification function might run back logic to validate the legitimacy of the attacker or the transfer or execute logic on the other some evidence. Or you can specify a logic in the message notification function which must be performed when the notification is approved or rejected.

  You can specify the notification message to the activity of notification function by
  Click on the activity of notification-> properties
  You will see a text box with the label 'Function name', you specify the name of function notification post here.
  It should be of the form .

  Published by: sarojak on Sep 17, 2010 03:41

• Clear the Message cache

  Hi all
  
  I'm looking for a work around the message of notification on the previous page.
  I refresh a page using javascript

   window.parent.location.href = window.parent.location.href;

  This don't refrsh the page, but the notification message is rendered again it is part of the html language. I can't clear the cache
  Is there a way I can clear the message notification on a given page?
  
  Thank you
  RD
  
  Published by: RD on February 8, 2012 22:18

  Hello

  He could I do not fully understand.
  Is it possible produce this script on apex.oracle.com so we can see it?

  Kind regards
  Jari

  http://dbswh.webhop.NET/dbswh/f?p=blog:Home:0

• Use values Pluging of notification in the text of the message (apex 4)

  I try to get something to work as in the example for the plugin, http://apex.oracle.com/pls/apex/f?p=654321:401:4379211328287332:, where you can see that when you make a change, it triggers the notification and knows the value of the list. But how do I get the value of the selected list item to enter in the text of the message? I have installed the plugin, created a dynamic action when an LOV changes and the notification appears and everything is fine, just I want my message to say "you have selected < current value of LOV >."

  Hi shoe,

  Take a look at the level of the text field of the help "text" attribute. It is said:

  The text inside the notification.

  The following placeholder is available:

  Syntax of Substitution on the server side: replaces a placeholder during the rendering of the page. Example: & P6_CATEGORY.
  The syntax of Substitution on the client side: replaces a placeholder with the current value of the browser. Example: #P6_CATEGORY #.

  Concerning
  Patrick
  -----------
  My Blog: http://www.inside-oracle-apex.com
  APEX 4.0 Plug-Ins: http://apex.oracle.com/plugins
  Twitter: http://www.twitter.com/patrickwolf

• When I get the message/e-mail notification, my camera flashes

  When I get the message/e-mail notification, my camera flashes

  Hello

  Follow the instructions to turn off the alerts of Flash LED here > http://www.imore.com/how-to-turn-on-led-notification-light-iphone

  Or tap Settings > general > accessibility > Flash LED for alerts.

• I get all my calls on my iphone 5.  It sounds at the end of the appellant, but it does not sound on my end and I do not get a past the call.  If the caller leaves a message, and then I get a voice message notification.

  I get all my calls on my iphone 5.  It sounds at the end of the appellant, but it does not sound on my end and I do not get a past the call.  If the caller leaves a message, and then I get a voice message notification.

  BabsMKE wrote:

  I get all my calls on my iphone 5.  It sounds at the end of the appellant, but it does not sound on my end and I do not get a past the call.  If the caller leaves a message, and then I get a voice message notification.

  settings - do not disturb - off

• I receive notifications, but the messages do not appear in the app!

  Hello Apple community!

  I just upgraded to a new iPhone, I did a clean install (which is setup as a new iPhone) and just added my return with iBackupBot messages. I get iMessage and new well since texts I receive notifications, but when I open the messaging app, these new texts appear. They appear fine on my Mac.

  Any thoughts on what I could do?

  Thank you very much!

  Antoine

  IF you receive iMessages but not SMS - then I check with the carrier to see if your account is successfully configured for SMS since it is a function of carrier

  Please let us know is there are ongoing problems

• I would like to receive a notification on my Apple Watch and iPhone simultaneously the messages/IM; not one or the other.

  I would like to receive a notification on my Apple Watch and iPhone simultaneously the messages/IM; not one or the other.

  I understand that if my Apple Watch is unlocked (or on my wrist) incoming Message notifications will be displayed on my watch. This allows to bypass the notification on my iPhone for messages.  I would like to find a way for Message notifications to simultaneously alert me on my iPhone and Apple Watch.

  Thoughts?

  Hello

  If you disable the detection of wrist (on your iPhone, in the application of the watch, go to: Watch My > General > wrist detection), it will make all notification alerts to be delivered to both devices. However, you will not be able to benefit from features including screen Wake on wrist lift, Apple pay and one unblock after placing the watch on your wrist.

  If you want Apple to consider adding an option for notification alerts to be delivered for both devices regardless of the other settings, you can suggest here:

  https://www.Apple.com/feedback/watch.html

• Just got IPhone 6s and that my texts come through but no notification on the messages app... Any idea on how to fix?

  Just got IPhone 6s and that my texts come through but no notification on the messages app... Any idea on how to fix?

  Is there a Crescent Moon on top of the phone, or next to your contact names?

• 8250 incorrect "date of expiration" and "Empty cartridge" message. Ink replaced but still the message.

  I got the expired cartridge message on my Photosmart 8250 for a year or two, for 2 cartridges, even if the cartridges were of the date. Remove one of the offending cartridges and replace immediately seem to do the sorting.  Problem is one of the "expired" cartridges, Magenta, has finally shown as empty and reinstated. I get now both the message expired and the empty cartridge (for all new Magenta). The watch also still message has expired for the cartridge else I have to say is now quite old, but still has a lot of ink in it.

  I gritted my teeth and to purchase 2 cartridges of spare yesterday, one to replace the old "expired" clear cyan and the other to replace magenta of replacement. The clear cyan expired message disappeared but the message re magenta is still show it as being expired, even if the dates printed on the two new magenta cartridges is 2014. I always get the message empty cartridge for both the first replacement magenta cartridge that I bought a few days ago, as well as for the second replacement I bought yesterday.

  I have tried everything I can find mentioned in this forum to solve this problem, but have had no success. I have to assume that the printer has failed, or is there a fix for this problem?

  If you have another cartridge, which could remove the error. You do not have to throw away your existing criteria, just put them in a ziplock bag in plastic and place them in a cool, wet - spot like a refrigerator. Change the cartridges and see if this removes the error message.

  If you can try that let me know and I'll be right back with you!

  Have a wonderful day!

  -Spencer

• Error message states that Windows cannot read the Service Notification of system events. Unable to start the computer.

  Original title: System Event Notification Service does not connect.

  Computer will not start.  Error message states that Windows cannot read the Service Notification of system events.

  Hi DACL.

  ·        What is the full error you receive when you try to start the machine?

  ·        You did it all change hardware or software on your machine before this problem?

  You can restore the system to the Windows recovery environment and check if you are able to boot to the desktop. Follow the steps in this link to boot into the Windows recovery environment and select the system restore option.

  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  Repairs to the system of Windows recovery environment

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.