Replacing the battery in the MP3 NWZ-E344 drive

Similar Questions

• I can't recover my system (DV6000) using recovery discs after replacing the card mother/HARD drive

  I have a DV6408nr (windows vista Home premium) I had to replace the motherboard and hard drive. When installing the new motherboard (same part No.: 443775-001) and insert the recovery (bought from HP) discs that I have, I received an error message stating that the PC could not be recovered using my disks. The serial numbers on the label service and in my bios do not match. When I entered the serial number of my bios in HPpartsurfer, he said that the system is a DV6449us. I already checked my RAM and HARD drive is brand new/not formatted. I used these recovery discs (manufacturer: 483905-003/483906-003) successfully before on other flags of DV series. Is there a reason why these discs should not work on two motherboards in the same system with these similar specs? What should I do to get my system recovered?

  The number of the motherboard and other show information in the bios of the new Commission?

  The numbers do not match the recovery disks or information is missing in the bios.

  If it's really a mismatch, then you will need to find the good recovery disks or use a Dell installation disk operating system and use the product key from the sticker on the laptop to get activated, and then manually install the drivers.

  If the bios tattoo is damaged or missing information only a used HP Center can then fix the tattoo.

  check your private messages

• NB550D - replace the RAM or HARD drive without voiding warranty?

  Hello!

  I noticed, that generally, Toshiba users replace their HARD drives and RAM memory without voiding the warranty.

  But I'd be happy to get official confirmation if NB550D netbook.
  Can I pass without problem, my material in this model?
  If it is relevant, I'm of the Poland.

  Thank you in advance!

  Hi dude

  Since it is only a user to user forum you will get no official confirmation here
  But you're right. The RAM and HDD Upgrade or replacement will not void the warranty.
  These pieces are extensible, and as much as I know that is mentioned in the user manual.

  Greetings

• HP 15-AC143WM: replace the DVD with SSD drive

  Hello
  
  I would like to remove my laptop DVD drive and replace it with an SSD. Is it possible to connect a laptop SATA drive this in any case and if so, how?

  my laptop HP 15-AC143WM

  Any help appreciated,

  Thank you

  REDA

  raj98207

  After looking through the maintenance and Service of Guide for your PC, I have to say Yes... but...

  Here is the link so you can read it for yourself: http://h10032.www1.hp.com/ctg/Manual/c04653884

  As I see it, there are three issues: space, connector, fixed support.

  It seems that a hard drive from a laptop computer could insert in the space left by the optical drive, it is so probably not a problem.

  It there is no second set of connectors of SATA HDD, but since the DVD player doesn't use the same connectors as a hard drive, you can use those-, given that those who are not designed to be used for a hard drive, they will fit, but they may not work.

  The biggest problem is the lack of a fixed support for the hard disk.  The optical drive is designed to exactly fit the space and is held firmly in place with a screw in the case of the laptop.  There is no support for the holding of a hard drive in this space and most likely, no way to attach it to the case.  You don't want a hard drive slide in the optical drive bay, then for me, it would be a show-stopper.  If you were willing to consider a SSD instead, this wouldn't be a problem.

  And finally, and above all, it is my view of your personal situation. I does NOT represent or speak for-HP, so if you want to do this as an experiment, you're on your own - any damage resulting will void any warranty you have and you'll be on the hook to fix at your own expense.

  Good luck
  ========================================================================
  I'm a volunteer and I do not work for, or represent, HP.
  ---------------------------------------------------------------
  If my post helped you, please click on the Thumbs-Up symbol on my post to say thank you.
  If my posts resolved your issue please click "accept as a Solution.
  ========================================================================

• Replace the UCS - b2xx HARD drive

  We have a UCS with blades B200.

  One of the HARD drive led STATIC amber, (it is a HARD drive failure according to the documentation), but UCS Manager did no show any alert.

  My first question is... I see not awake in the UCS Manager? I have to turn on any kind of follow-up to the HARD drive?

  The HARD drive was reflected with RAID 1, then why has decided to install a replacement.

  We extracted the defective HARD drive and inserted a new (because they are Hot Swap we did with the server on).

  But now the UCS Manager is showing the HARD drive as a disc UNKNOWN, so he did not recognize it

  We rebooted the server with no luck.

  What should I do any kind of procedure of the UCS to recognize the new drive and rebuild the RAID 1 mirror?

  Thank you

  Hello

  Which firmware version are you running?

  In versions prior to 2.0, we had has very little followed HDD and reports. The status UNKNOWN to the driver after installing a new is also due to a bug known in versions 1.4 or previous.

  If you see the normal LEDs on the disc, then you know that the re - build is finished, you can also restart the blade and enter the optional ROM of LSI, and check the status of the drivers.

  . / Afonso

• a1140n flag replacing the SATA II HARD drive?

  SATA II disks can be used to replace a SATA drive failed in the above desktop machine?

  The specifications for the machine indicates SATA, but I'm not sure the new II will work in the system.

  Thanks in advance.

  Yes that correct, there is no reason why technical SATA-300 (SATA II) will not work in the system SATA-150. Like most BUSES and protocols, the specifications call for SATA-300 to be backward compatible with SATA-150.

  I read this somewhere a bit backwards: the HD is not reach anywhere near the 300 MB/s transfer speed which can be able to SATA-300 interface, test to see the

  up to 35 MB/s - 135 MB/s for non-RAID drives and up to 225 MB/s for readers RAID0 configuration. 150 / 300 MB/s is SATA ports

  maximum transfer rate, not the maximum hard disk transfer rate. This means that the port can handle up to this number transmittions,

  but this does not mean that the hard drive can achieve this goal.

  If the faster hard drives can only max to 135 Mbit/s it makes you wonder why SATA-600 is developed. I would get a HARD drive with the largest affordable cache on this subject.

• How to replace the optical drive on the Tecra R940

  Hi all.
  I search everywhere trying to see how to replace the ODD (optical disc drive) of a laptop Toshiba Tecra R940? pt439a-00n003
  its supposed to be easy, but can't get out.

  Anyone know where I can get some info on how to make the?

  Thanks for reading!

  I think that there are just one or two screws holding it on the basic coverage, it then behind the scenes.

• Satellite M30 - error message after replacing the DVD drive

  Virgin, excused my English ;)
  I have a satellite m30 and I replaced the DVD-cd-rw drive in series with a SLIM NEC ND-6650 DOUBLE LAYER, DVD time bios gives me error
  0203: failure IDE #2
  Is it possible to remove this message?

  Hello

  As far as I know that this message can not be eliminated and it happens every time if you want to use the drive is not compatible. Always is it that all readers may not work with all models of laptops.

  In this case, fundamental problem is the pin assignment. It is not the same in all players.

  Good bye

• Replace the drive of my laptop in a Toshiba Satellite 5100/5105 - experience?

  I intend to replace the defective CDRW/DVD drive in my Toshiba Satellite 5100 503 (European version, it was sold as 5105 in the United States and other countries).
  The disk is a UJDA730.
  Update, I consider the much appreciated a Slimline DVD +/-RW drive. Unfortunately, some internet research revealed that the upgrade to optical laptop drive is not as simple as one would hope. I had no trouble to remove my old drive (just remove the keyboard and unscrew the two screws), so I consider myself to be able to put in a new drive instead. However, two problems remain:

  -mechanical compatibility: the 6500 has seems to have a different layout of collar. The eject button and the LED are in a different position from that of my current drive, so I doubt I'll be able to use my old glasses with it. In addition, the bezel from my old drive has a niche in the lower right corner (similar to that found on some laptop computers Fujitsu-Siemens), which gives place to the volume control on the laptop. So I can't reuse the old bezel and bezel of the NEC will probably not allow me to close the CD tray. I wonder if some Dremel work on the plastic parts of the NEC drive will allow me to physically. Anyone who has tried?

  -electronic compatibility: computer laptop drives don't usually have jumpers to change their configuration of master/slave/cable selection. Instead it is located in the firmware, change so it is flashing a new firmware, which is not easy to find and hard to do if your drive is still not recognized. SO I need to know if my notebooks is the optical drive set to master, slave. CSEL or 'inverse cable select. " Can someone help me here, either by own experience pointing me to a relevant source on the web?

  Hello

  as a first step in a Satellite 5100 CD player is fixed mounted and can only be replaced with the same model! Another model might work, but as you can see the bezel fits and maybe the new drive does not match 100%. So you will have problems all the way!

  What do you think about an external solution via USB or Firewire. It's the best way to upgrade!

  To bye chris

• HP ENVY 17-j101ex - replace the SSD HARD drive

  Hello

  I have HP ENVY 17-j101ex, with the standard configuration: 2 x 1 TB drive HARD 5400 RPM SATA. I want to buy 1 SSD drive and replace the first (boot) hard disk drive. I don't know if it works or not.

  I want to buy a SSD Samsung 840 EVO 250 GB SATA III (MZ-7TE250BW), 2.5 ", dimensions: 100 x 69 x 7 mm

  I have to: 1 x 1 TB HARD drive (as a secondary drive) + 1 x 250 GB SSD SATA3 (as your startup with system disk)

  Is this ok?

  I found some info, that:

  Supports a 6.35 cm (2.5 in) 300 GB or 160 GB SSD (SSD) drive in 7, 0 - mm (. 28 - in.) thick

  Supports 6.35 cm (2.5 in) hard disks to 12.7 mm (. 50-in) and a height of 9.5 mm (. 37 - in)

  Is it not this Samsung SSD too big?

  I also found information on envy 17 series, which:

  Supports the following single hard drive/solid-state drive combination configurations:
  ● 1-TB, 5400-rpm, 12.7-mm hard drive × 1 + 300-GB solid-state drive
  

  and also:

  NOTE: Supports RAID-0 as default for all dual hard drive/solid-state drive combination configurations.
  

  So, first of all should I disable RAID-0?

  Thank you for your help and sorry for my English

  In fact, I have the same model laptop PC series. You will have no problem replacing the mechanical main hard drive with an SSD. The Evo to Samsung 250 Gig is a very good choice. I suggest you get cloning software, put the SSD in the second slot, start from cloning software and copy (clone) the startup disk for the SSD. You'll slim down the contenst of the diskette of starting less than 250 concerts to achieve, but you can store files off to the second disk of 1 TB in the process. There are other ways to do this post if you have any questions.

  Here is a video showing how to install the hard drive.

  https://www.YouTube.com/watch?v=wx3dMGXrGCc

  RAID-0 is supported, but you wouldn't want as a second hard drive with an SSD. If your readers are appearing as volumes of letters separated in 'the PC' or 'Computer' then RAID-0 does not exist and you shouldn't have to do any disorder in the BIOS.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Pavilion 17-f084nf. Need to know how to replace the hard drive

  I do not understand how to get to the series 17-f000 bowels. I want to replace the RAM and HARD drive. There is a manual?

  Maintenance & Service Guide

  See Chapter 5 and 6.  You may need to remove up to 83 screws. You get a tray or paper and lay out how and where the screws go. An alternative is to take digital photos at every step.

• Problems after replacing the motherboard

  I had my motherborad replace and drive hard and now still wmi repeated problems startup problems and disk problems
  now computer freezes up on me I think I will close it
   
  Please you delte this message because you seem to move my posts elsewhere anyway, and have not responded to me
   
  Pleae respond as soon as possible I think THAT MY COMPUTER IS GOING to BLOW UP
  ERROR 8004005 0XC00000D 0X000000 0 X 79
  REPEATED WMI ERRORS AND OTHER MISTAKES TO THE COUNTY PLEASE WRITE ME AS SOON AS POSSIBLE
   
  I could not download the file, I hit copy and got many files, but it wouldn't let me download the file do - what I do?
  now, o took two blue screens and several error what should I do. error fatal 0xfffbf8 error ox0000020 essent and 24 and error 0 x 79
  I had shut downs and crashing and placing of time then going on.?

  Hello

  "I had my motherborad replace and drive hard and now still wmi repeated problems startup problems, and disc problems.

   

  You don't say who 'fixed' to your computer.

  If it was Dell, which is in contact with you soon, get them to repair it properly, or if it was someone else that Dell, take it back to the person who has replaced the motherboard and hard drive and get them to repair it properly.,.

  See you soon.

• Help please... Replaced the hard drive of MBP, restored from TM, but the Windows XP virtual machine does not start

  I replaced the 250 GB hard drive in my MacBook Pro early 2009 with a 500 GB drive, it the Mac OS extended (journaled) format and restored from my Time Machine backup.

  Now when I try to start my Windows XP virtual machine (using Fusion 2.0.6... planning upgrade to 3.1.2 but wanted to validate all was well first), I get BSOD, even in safe mode.

  I have my vm separately saved on a network drive data files based on things that I had read before, I do not think that TM backup of virtual machines. However, a friend with a similar setup with more knowledge I think because I could see my Windows XP vm VMWare listed under 'Documents' in Time Machine showing its full size, it has actually saved and there restore it. Apparently he has done this successfully before.

  Should I have partitioned the hard drive? I don't think that my previous drive has been partitioned. Don't know what to do now.

  TIA!

  Katie

  To be clear: you have restored VMs from the disk or network time Machine?  And if the network drive, what backup method you use?  (i.e.: have you just copied engine off the computer virtual package or not?)  Can you copy/restore the virtual machine to the network again drive?  What is a virtual machine that has the error, or other virtual machines have problems?

  Time Machine backup correctly a virtual power off machine. But since Time Machine works automatically, you often will get not a consistent backup unless you do some tricks to make sure Time Machine backup only when you use a virtual machine.  (i.e.: turn on Time Machine only when you're done with the virtual machine.)  Thus, it is normally recommended to exclude the virtual machines from Time Machine and use another method to back up virtual machines.  Your friend is lucky or is only backup virtual machines powered off.

  Should I have partitioned the hard drive? I don't think that my previous drive has been partitioned. Don't know what to do now.

  The Mac player Paritioning is unnecessary unless you use Boot Camp or have required another for the partition.

• Just replaced my Vostro 1520 (32-bit) hard disk drive...

  You know, I finally broke down and I replaced the drive hard because the dreaded Blue Screen of Death came more and more frequently (1 - 2 times each month) and I'm tired of Group research tools to fix it. I hope that replacing the old Seagate hard drive with a drive hard Toshiba will make these problems disappear? Using Windows 7 FYI.

  .. .at this point, I have just 2 problems.

  1. my touchpad no longer works. I tried to download a driver on the Dell site, but it seems to crash during the installation process. Help!

  2. I want to reinstall the program Microsoft Works delivered factory-installed, but looking through the CD that came with my system 4 years ago, there is no CD Microsoft sent me. I am able to get a copy of MS Works for my Vostro 4 year without $$$?

  Any help appreciated.

  Hi judyh2000,

  As mentioned correctly ejn63, pilots are required to be installed in the correct order. Please see the http://dell.to/12oPjsc link to check the correct order to install drivers after installing Windows.

  To get the drivers for your system, click the http://dell.to/18NmI2Dlink. Enter the serial number of your system, and select the operating system. Install the drivers in the order shared in the link above. Also, please update the BIOS.

  Note: Make sure that the power adapter is connected and the battery is charged at 10% or more to update the BIOS. Furthermore, disconnect any external devices before the BIOS update. All programs should be closed and saved documents.

  If the problem persists, please follow the steps in troubleshooting on the link http://dell.to/YasJlx. Microsoft works came preinstalled with the system. It is not possible to ship the CD for it.

  I hope this helps. Answer please if you have any questions.

• Mac Book Pro is not too hot.  It is time to replace the battery?  Can I replace the battery?

  MacBookPro is not too hot.  It's time to change the battery?  Can I do it myself?

  The Mac runs his fans in a feedback loop, based of the internal temperature measured.

  If the temperature goes up and the fans are not speed up to compensate, you probably have a hardware problem.

  If the Mac becomes too hot, it will make an uncontrolled emergency power off.

  EDIT: Replacing the battery is a completely separable question not related to temperature. Is the Samsung phone batteries that catch fire, not Mac.