Replacing the motherboard on a Satellite A series

Similar Questions

• Replacing the drive HARD on Satellite C series

  Hello

  I want to replace and upgrade my hard drive internal sata, what is the maximum size that I can install which will fortunately be recognized by BIOS / chipset?

  Hello

  SATA controller isn't limited to a specific size of the HARD drive.
  Generally, you can use 2.5 SATA HDD support any size (250 GB, 500 GB, etc.)

  But have you considered using a SSD drive? I prefer SSD drive, even if these discs are more expensive. The performance is much better and believe me; the performance gain will be noticeable.

• Satellite A110: I need to replace the motherboard and the CD/DVD combo drive

  I have a Satellite A1100, and my CD/DVD Combo needs to be replaced... also, I need to replace the motherboard by qualifying the connections that connect the CD/DVD drive is damaged. Is there any possible way for me to get the motherboard and the CD/DVD combo myself or should I consider a service repair center?

  And if there is a way to get the spare parts of CD/DVD and a motherboard... can someone please tell me where I can get them from? If anyone has any idea how much it's going to put me back I would appreciate, they would let me know how it is... also, I would gladly help if someone can tell me what I can do about it.

  Thank you

  Hello

  How old is your machine? If you still have your warranty, so why not give your machine to a local service partner?

  So if you don t give something on your guarantee you can trade your coins. But to look for the pieces on google and you won´t get any help from toshiba (e.g. manual disassembly or something similar).

  I tried long before your request and I made my experience that if you want to open your machine your completely on your own.

  Welcome them

• Replacing the motherboard on the Satellite L750 - 16 X

  Hello

  I am trying to replace the motherboard on a L750-16 X. I think that I need this A000080670 card, which is available. Under the RAM slots the sticker says A0000806709B141422W. I'm not sure of what the average figures and additional letters and I was wondering if anyone knew if it is compatible.

  Thank you very much

  Unfortunately, it is not easy to help you with this. As you probably know it's user forum for this kind of info is not easy to find.
  I don't know where you want to get the new motherboard, but if you want to buy it by some authorized service they should now what they offer.

  I don't know if anyone here has the same machine and can help you with this. What you can try is to contact the nearest Toshiba service provider in your country and ask for help.

• Can satellite M70-159 - I replace the motherboard with another?

  Hello!
  The model of the M70-159-card mother K000033840 can replace another motherboard with a number K000033860?

  Thank you.

  I put t know if it s possible because I m not a technician for laptop.
  Normally, you should only replace the motherboard with the same.

  I put t know if it works. Contact a local ASP and ask for a technician. They know where the other is, and if it would work.

• Replace the motherboard

  Hello everyone,

  I need to replace the motherboard of my hp pavilion dv7 4013el because I think it's broken...

  (Serial: CNF0192CGT product: WS522EA #ABZ)

  Is there someone who can explain to me how I can understand that one should I choose? can you suggest a place where I could buy it?

  I thank very you much in advance!

  Your English seems to be very good, so here's the link for the 4xxx series PC laptop dv7. It will show you what is involved in the repair of your laptop.

  http://h10032.www1.HP.com/CTG/manual/c02666747.PDF

  It is a youtube link if you care to look at:

  http://www.YouTube.com/watch?v=tsHtlZ_VrWg

  The MB part number is on a sticker located under the memory.

• Want to 800-060: reactivation after replacing the motherboard

  I bought a HP Envy 800-060 with Windows 8 pre - install Amazon in July of 2013. It was an incredible computer since that time, and when the free update of Windows 8 for Windows 10, I did immediately released. Recently, however, the motherboard has failed on the computer. It would not stay same POSITION, and after much troubleshooting, I finally decided to replace the motherboard. Now that the computer is running again, I guess that the motherboard change was sufficient for the operating system to think that it is no longer enabled. I was never provided with a key of Activation of OS (Win8 has been pre-installed), and Microsoft has suggested that I contact HP to find the original key. I've looked everywhere on the chassis and inside the tower for a valid Windows activation key, nothing helps. I tried to find a phone number to call for support, but my product is outside the guarantee. I don't need advice or troubleshooting tips (so I don't pay the $59.99), all I need is my activation key valid Windows based on my serial number of the product. Anyone know the best way to achieve HP with this problem and have it is resolved?

  Thanks in advance!

  JC

  jcontino889

  The unfortunate, is that your original product key has been incorporated in the firmware original by HP motherboard UEFI when the PC was built.  There is no way to recover this key now.

  HP retains no record of keys to individualized product corresponding to individual computers, so they won't be able to provide you with the original key - and they are under no obligation to provide you with a SECOND key, that you didn't do the replacement of HP hardware.

  With the product now being out of warranty, it's really call HP or not you upload support - and the experience I have had with older equipment-, they do that, there's just no way around IDs.

  HP customer support is really the only way you have to get support.  If they don't help you for free, because your PC is out of warranty, there is nothing we can do about it on this forum.

• a610n - fan error of the system after replacing the motherboard

  Hi all

  I just replaced the motherboard on my system (phone http://h30434.www3.hp.com/t5/Desktop-Hardware/M2N68-LA-Narra-2-Replacement/td-p/3711774) and now I get this error when starting: Fan failure system, PC service to avoid any damage. I thought it was the CPU fan but he was running and after some research, I realized that he could talk a case fan.

  As a side note, the motherboard, I had was a little different and missing 2 connections that seem to be the front mic/headphone and USB ports.

  Now, the case's fan then what really is the problem? Any ideas anyone?

  Thank you

  -Panos

  The rev3.02 of M2N68 - THE Committee a case fan rear 3 poles. See here.

  The CPU fan is a 4 pin cable and attaches to the appropriate header to 4 pins on the motherboard. See the representative schema above.

  As for you, another question, the front USB port attaches to a USB connector on the card.

• I have progaram after I replaced the motherboard on ipod classic 7th generation?

  I need to reprogram after that I replace the motherboard on ipod genderation 7?

  If hard drive iPod is not deleted and the previous content, does not.  However, you can do a restore of the iPod using iTunes, to give him a fresh start.  This erases the iPod, reinstall its software and sets it to the default settings.

  Use iTunes on your Mac or PC to restore your iPhone, iPad or iPod settings - Apple Support

  Have you ever done work (to replace logic card), or you're going to do?  If you have not yet done the work, which is the real problem that needs to be replaced the iPod logic board?

• Qosmio F10: RAM upgrade issue after replacing the motherboard

  In 2006, when my F10 - 128 fell down as a fault of the video card, Toshiba has replaced the motherboard (865 PM) of my F10 by a new one with the video card installed in Go 6600.
  When I came back, I noticed that the same RAM modules have been installed (2 x 512 MB DDR 333 Mhz) as I previous had on the old motherboard.

  Then, I assumed that I could easily upgrade to DDR2 RAM, I realized that this type of RAM supported by the new motherboard installed (915 PM?). But the modules DDR2 Ram (Kingston 1 GB SODIMM (KVR533D2S4 - 1 G) 533 MHz) that I ordered is simply not in the storage media... The notch in the module is placed differently that the modules of RAM DDR.

  If the jury has been replaced by a newer version, with the video card Go 6600 (PCIexpress), how is, I have a Council that can not support DDR2?

  Here, I am really confused. Someone at - it advice please?

  > If the jury has been replaced by a newer version, with the video card Go 6600 (PCIexpress), how is, I have a Council that can not support DDR2?
  I think the jury is still supported DDR2 memory modules, but the allocation of the memory pins could be different.

  You should contact the ASP in your country and ask for the compatible modules.

• Qosmio F10 recover after replacing the motherboard

  Hello

  I'm having a problem with my Qosmio F10 recovery. It won't boot from the CD, I get a message "media test check the cable failure".
  I tried everything I could find here on this issue without any results. Then I read somewhere on this forum that this recovery cd would not work if the laptop has been repaired and has a new motherboard. This is excatly the case.

  I got a new motherboard and CD/DVD player put some time ago.
  How can I make it work again?

  A.

  > Then I read somewhere on this forum that this recovery cd would not work if the laptop has been repaired and has a new motherboard. This is exactly the case.

  Who replaced the motherboard? THE ASP?

  Well, usually the recovery CD should work after the replacement of the motherboard.
  I presume that the parts have been replaced with exactly the same parts and so it should t be a conflict between the recovery and the new motherboard CD.

  Have you tried to boot from another bootable Win XP or Linux CD? Check it!

• Can I replace the motherboard on w510 with

  Hello

  Can I replace motherboard 63Y1495 with 63Y1540 or 63Y1542. It is a w510.

  Recantly, I bought an old w510. The portable freezer randomly and never recoveres. It has been repaired for this before and worked fine for a while. There is no problem, but the motherboard video

  What is your advice? Can I replace the motherboard? Is it a long way? Or is it better to find another laptop?

  According to my notes, 63y1545 is a T510 Board with integrated graphics (Intel). The other 2 boards are W510 boards. They are all the same size and shape, but W510 boards have 4 memory slots and use a different cooling fan. The W510 is a nice machine and worth it if you can get a good price on a Board and fan of fixing. Basic coverage is also different machines 'W', but I don't know if it's important or one you have now.

• How to re-enable Windows 7 after replacing the motherboard.

  I managed to replace the motherboard in an Acer Aspire v3 and all is well (or almost).

  Only problem is that Windows 7 requires now that I'm using an illegal copy of Windows.

  I know that the reason is that the version of Windows OEM is selected with the original motherboard.

  I talked to both supports of Microsoft and Acer support several times but neither can or reactivates my windows. Is it really to do I have to pay for a new product key as a consequence of a repair?

  Hello

  That said, that the next question is if I can solve the problem by buying a new product key?

  Yes, look at this response from Microsoft.

• Had to replace the motherboard: System does not boot, the XP installation disc runs to a failure.

  Thus, the motherboard in my PC started to die.  I replaced it.  Start-up of the new system has prompted a Safe Mode boot.  Choose Safe Mode, the system restarts after mup.sys.  Choose the last known good startup the initial windows screen appears briefly, then restart the system.  Boot from the original installation disk, all kinds of drivers charge then the last message that appears is loading Windows Executive.  A
  BSOD appears stating something to the effect of an error with the hard drive, verify the presence of virus, remove the new hard disks, etc..  Hard drives is a virus.  So, how do you round a re - install defective and/or repair or a defective Mode start safe mode with new material?

  Thank you

  Hello

  Since you have replaced the motherboard, you may need to reinstall the operating system.
  Reference:
  http://Windows.Microsoft.com/en-us/Windows/help/install-reinstall-uninstall

  Thanks and greetings
  Umesh P - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• How to replace the motherboard on the Pavilion p6550z

  How to replace the motherboard on the Pavilion p6550z

  Depending on where you have acquired your replacement Board Aloe, it may be 'tattooed' with the name of the model, product number and the serial number of your computer.

  Use these HP guides as needed.

  (1) unplug the computer and hold power in 5 to 10 seconds.

  (2) on the side of the cover (see guides above)

  (3) place the case on the closed side with the open side facing upwards

  (4) take a photograph detailed inside your computer... take more if necessary

  (5) unscrew the restraint of external expansion card (see guides above)

  (6) disconnect the power supply connections to the motherboard and all devices... tag and/or take more pictures

  (7) remove the... rock expansion cards cards gently just pulling up

  (8) unplug data cables from the motherboard and readers... tag and/or take more pictures

  (9) disconnect remaining USB switch, connections etc... once again, the label or take more pictures

  (10) remove all motherboard screws on the case and remove the motherboard

  (11) reverse the steps, starting with #10 and working #1

  Good luck