Replacing the old hard drive to a new hard drive

Similar Questions

• replace the old hard drive with nine in Pavilion dv2019tu

  my laptop had toshiba 320 GB hard disk that does not work, then I want to install a new hard drive to it, will this model support 1 TB HDD?, and what is the maximum ram it can support?

  Please quick answer, I do not have any other pc to continue my work.

  Your Service Manual:

  Manual

  Max Mamory is 2 GB. I'm sorry.

  AMD model series versions has been reported to have difficulties even with hard drives of 500 GB. There has never been a logical explanation. Since it is SATA it must accept any drive SATA 2.5 inch width 9.5 mm thick. However, the reports were many and not lightly ignored. I can not find plug on the dv2019tu so if it has an Intel processor, I would say that you're good to go with a 1 TB SATA drive, as long as it is not thicker than 9.5 mm. Also pay attention to the connecting piece plastic on the old hard drive. It is necessary to connect the SATA ports on the drive to the motherboard. You have to use it again.

• replacing the old hard drive in the new computer

  I have a new HP pavilion p 6-2330, which is Windows 8. I have removed the hard drive from my old computer and want to transfer information from it on my new computer. Can you tell me what I need to transfer this information without opening my computer inside of my new

  Hello

  I think that all their stock computer stores. There are a few varriances for 2.5 "and 3.5". I don't know where you are, I live in Melbourne (Australia) and I can buy in a store near my area. You can Google your region.

  Kind regards.

• Replacing an old hard drive causes the system had become unbootable

  OK, here's the scenario.

  Background:
  My old computer with Windows XP has been installed on a hard disk of 40 GB. Later through subsequent updates, I bought the upgrade Windows Vista Professional (retail) and proceeded to install Vista on a brand new 250 GB hard drive. Initially, he had some problems I did a clean install with upgrade to Vista, but then with the help of Mircrosoft support (and several hours of reformats and corrupt the old installation of XP) managed to get Vista installed hard disk new and active. I kept the old drive hard in the computer for about a year, but then noticed that he was starting to get out. I moved all the old information off the drive and recently bought a 1 TB drive to replace. I deleted everything that above with the exception of a few remaining files that won't let me not delete - documents and settings and startup records, respectively.

  Problem:
  When I take the old 40 GB hard drive to reside on Windows XP, my computer when startup is unable to find a drive it can boot from. Under disk management, it is labeled as system - even if the windows directory is on a completely separate drive. My intention was to replace the old hard drive, but I can't get my computer to recognize that it is not on the system drive somehow.

  Question:
  Is it possible to change what hard drive is recognized as a system disk or make sure I can get out the old hard drive and still keep my bootable system?

  Hello Lightningfst,

  Thanks for posting in the Microsoft answers Forum.  First off I would say that, before trying any of the suggestions I'm about to do that you completely back up the contents of the drive with Vista Business as a precaution.  The first suggestion I have is to copy the MBR of the disk of 40G to 250G drive.  It could be as simple as that.  However, when Windows sees a drive and initializes it, Windows writes a serial number of 4 bytes in the MBR (sector 0) of the disc. No matter what partition you create on this disc is then associated with the serial number and the drive letter that the partition is given.

  When you then progress to clone a boot partition on the new disk with a cloning program that does not copy the MBR, the serial number of the old drive is not copied to the new disk, so the new disk retains its serial number Windows has seen before.

  When Windows starts on the new disc, he sees the serial number of the new drive and guess the partition that is on that now belongs to the previously selected drive letter which is almost always not C:. Since installing Windows starts on C:, there is now no C: drive when Windows starts. Trying to connect allows Windows attempts to load the user from C:\Documents and Settings\registry, and the C: drive is not there, so Windows simply to abandon the attempt to logon and closes a session back.

  If this happens to you after copy the MBR of the disk of 40G to 150G Unit let us know and we can help you solve the problems that.  I hope this information is useful.

  Thank you

  Jack

  Jack
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• My motherboard has exploded and I have the hard drive. How can I copy the address book for a new installation on a new computer from the old hard drive?

  I have the old hard drive in a USB enclosure and connected to the computer again. I have installed firefox and you need to have the address book (critical) copied and inserted information from address book on the new computer. I hope that there is a file I can replace easily?

  Firefox send an e-mail, it's strictly a web browser.

  If you use Firefox to access your e-mail, you use "webmail". You must seek assistance from your service provider or a forum for this service.

  If your problem is with Mozilla Thunderbird, check out this forum for support.
  https://support.mozillamessaging.com/.../home
  
  or this one
  
  http://forums.mozillazine.org/viewforum.php?f=39

• Get the old hard drive to work on the new processor

  I am a PC Tech company with problems on PC at home.

  My Win 7 Home Premium Dell Studio T435/9000 dead.  It was a motherboard problem, I chose not to replace the CPU/Mo with a duplicate.  The hard disk MBR is good, I could read it and when I installed in an Optiplex 990 at work, it is initialized.

  I had the chance to receive a new Dell T5610 with 2 CPUs of a parent.  It came with professional Win7 preinstalled on an SSD, UEFI boot on a GPT disk.  But all my apps are absent and even a rat-pack obsessives like me do not have all the CD and install the files for the various applications on the old hard drive.

  I want to use my old hard drive on the new PC, then after that it's stable, migrate the old hard drive to the SS disc supplied with the PC.

  First problem was to learn the differences between MBR and GPT.  After this was learning that Home Premium does not work on a PC with two separate processors.  I use Win7 professional for that.  With the help of this forum, I was able to do this by using the Optiplex 990.  I run Win7 Professional on the Optiplex 990.

  I take the former home of hard disk go BIOS to legacy.  Old hard drive that boots on 990, does not start on T5610.

  I try various advanced options, safe mode, low-resolution video, nothing works.  I get a BSOD is a hard drive error, STOP 040000007 B.

  I try Startup Repair tool and get the following:

  Problem event name

  Offline Startup Repair

  1 6.1.7600.16385

  2 6.1.7600.16385

  5 Autofailover

  6 1

  7. bad driver

  6.1.7601.2.1.0.256.1 OS version

  Locale 1033

  How can I get my old hard drive to work with the new processor.  Is it a question of Dell, a Win7 Office.  As the hard drive starts up successfully on another CPU, I believe that the hard drive is good.

  Thank you very much for your help!

  Thanks to you all.  But the solution was completely different.

  Dell said the motherboard on the accuracy was so different from my old PC that unless I reinstalled Win7 Professional from scratch on the old hard drive, motherboard would not work with the old hard drive.

  They have guaranteed that the old hard drive would work on a 8700 XPS.  After some problems, I managed to do the work.  Problem solved.

• Transfer of files from the old HARD DRIVE to new computer without an old computer. (He's dead - can not use) I have the hard drive, but need help to transfer my old files and settings.

  ·        My old Win XP computer died - it is completely unusable. I bought a new PC with Win 7 Pro and 1 TB. I still have the old HARD DRIVE (250 GB) which I have attached on the new computer using an external enclosure supports SATA drives. The external hard drive is connected to the computer in USB 3.0. I checked that the new computer can see the external hard drive. (I also used for backups by changing the hard drive with a 2 TB drive 'mass storage' - that works.)

  I searched the internet for possible solutions and found no help. If the transfer of files from Microsoft would change the disc to analyze, it would be simple. But if I select the OLD computer it scans the disk I'm on (new) - automatically.

  Is there anyone who has had the same problem? He must be because computers die all the time and people buy new computers - who then, somehow, they get the former transferred files. I could do it manually, but that wouldn't change the settings. Last resort would be to buy an old computer XP (SATA), replace the drive. Transfer the files, and then sell this computer.

  You may be able to recover your data files, but I hope that you will set up your new system to automatically backup a second internal hard drive or an external USB hard drive.

  This suggestion may not work, but it's worth a try. Buy an external USB drive enclosure. They come in two sizes 2.5 "for the portable computer drives and 3.5" for desktop disks. You can purchase adapters for 3.5 "envelopes so that they can also be used with a portable player. Place the hard drive in the enclosure and connect to a USB port of another computer. Several hard disks are more able to start, but the contents of the disc can still be accessed, read and copied from the disk because you do not use the operating system on a failed disk.

  Here is an example of the type of device, I suggest:
  http://www.amazon.co.uk/s/?ie=UTF8&keywords=external+hardrive+enclosure&tag=googhydr-21&index=aps&hvadid=14388537836&hvpos=1t1&hvexid=&hvnetw=g&hvrand=556960941559985931&hvpone=&hvptwo=&hvqmt=b&ref=pd_sl_32uorbwbuk_b

  You need only to the speaker, that you see are not necessarily more expensive. Thereafter, you can put an old hard drive usable, an abandoned because you need a larger drive internal, in the enclosure and use it as additional external storage.

• Cannot copy files from the old hard drive to new

  Original title: crash and recovery of hard drive problem

  My hard drive crashed it wouldn't boot saying config.sys is damaged or corrupted, I tried to fix it but the sector is damaged. I was using XP, I had a password on my settings. I installed a new hard drive and reinstalled windows XP, but even if I can 'see' the old hard drive (always installed) I can't access my documents, how can I get to them? I know the password but since its an account on another drive it won't give me the chance to log on to the account.

  Assuming that you use the Encrypting File System (EFS) then this article should solve your problem:

  "How appropriate a file or a folder in Windows XP"
    <>http://support.Microsoft.com/kb/308421 >

  HTH,
  JW

• How can I move the old hard drive to new programs.

  I tried to upgrade Windows 2000 Pro, XP Pro on my hard drive. XP would install, but would break to the BSOD with a STOP of the F4 code. BCupdate2 says that the startup code is up to date. NTDLR and boot.ini and NTDETECT.COM are present on the old hard drive. After 2 days of searching and trying different solutions, I bought a new hard drive and installed XP Pro top. System is now running. I want to make my programs from the old hard drive to the new hard disk as well as shortcuts, system settings, user accounts, and user data. I want the new HDD to resemble the old hard disk would look like had XP installed successfully. I have a utility provided with the hard drive, but it says it will take the BONES of the old drive and put it on the new drive that would make my non-operational system. Any help? The history of the old drive is 64 XP was installed originally, but some of my programs wouldn't not below so I installed Windows 2000 Pro. Which was great for several years, but the new versions of the software I use has stopped running less than 2000.

  I'm sorry, but it is not possible to move programs from one operating system to another.  You must reinstall the programs.

  Your data files must be in the Documents and Settings\ folder from the old hard drive and you can copy them to the folder on the Windows XP system.

• copy the data from the old HARD drive to a new HARD drive

  have old hard drive with data and op sys - must copy old hard drive data on the new hard drive WITHOUT copying op sys

  a simple way is the best way.

  Help, thanks

  Hello

  1. purchase a USB hard drive enclosure to put the old drive hard in > plug it into the new computer.

  Here is a video on how to do it:

  http://www.YouTube.com/watch?v=SLLQusrmzvI

  2 slave the old hard drive in the new computer, so a new office.

  http://www.WikiHow.com/configure-master-and-slave-in-BIOS-for-two-hard-drive-disk-in-a-single-system

  See you soon.

• Vista activated on the old hard drive hard disk failed to load to the new disk hard wont let me enable

  Vista activated on the old hard drive, failed loaded hard drive vista Ultimate edition on the new hard drive, but do not let me activate. This is a saved copy and use the product from the back of the disc that contains key

  Hi Tony,.

  I imagine the inconvenience that you have experienced, but don't worry, we are here to help solve the problem and guide you in the right direction.

  You can go through the steps in the link activate Windows Vista by phone activation.

  Hope this information is helpful and let us know if you need more assistance. We will be happy to help you.

• How to transfer files from the old hard drive to a disc new hard, old hard disk has been removed?

  I had a hard disk going bad. Installed a new hard drive and the need to transfer files from the old hard drive. I have an external enclosure for the old hard drive and can connect by usb port.

  The process is fairly simple once you put the old drive in the external box. You can use the usual methods of copy and paste in Windows Explorer. If you copy files, complete folders, you can take a look at RichCopy.

  http://TechNet.Microsoft.com/en-us/magazine/2009.04.UtilitySpotlight.aspx

  Tom Ferguson

• With the help of Windows Easy Transfer - need to transfer the old HARD drive to new computer - old HDD attached as external drive for the new usb port of the computer - help

  New computer installed Windows 7 and gave me an option to use Windows easy transfer to transfer files, data, programs, etc. from my old computer.  All I have from the old computer's hard drive; a lightning strike fried either food or his mother by car.  I have attached the hard as a disk to the new computer using the usb cable provided with the external hard drive case.  It is recognized as drive E: on the new computer.

  Trying to follow the instructions given by the Windows Easy Transfer software.  Get the software/folder from the old hard drive (drive E), but trying to run the software that I can't seem to do anything on the old disk.  When asked what is the former or the new computer - I respond to old, but no new file is created for the transfer.  When I answer again, a new file is created on the new computer (rather than the old HDD) and then he transferred again to new.  I can't create a file of whatever it is I want to transfer from the old HDD.

  I can't use an easy transfer cable because the old computer does not only the hard drive.  I can't connect to a network for the same reason.  I only have the hard that I can attach to the new computer.  But I can't get the new computer to process the old hard drive separately for transfer purposes.  The only other option I can think of is to attach the old HDD to another computer, and then try to run the software in this way, but I don't want just the stuff on the old hard drive a copy to the other computer.

  Can anyone help?  Suggest how to get the old hard drive files, data, transferred etc. to the new computer.  What are the steps?

  Thank you.

  Do yourself a favor, with the old drive connected externally, in the browser, simply copy the data files to the location of Documents of the PC win7. You can not copy programs, they need to be reinstalled from media origonal. You can copy all the downloaded files instalation

  You may need to take possession of your old documents folders - see win help to find out how

• Old computer is dead, HARD drive still alive. Can I install windows 7 on your new computer without formatting the old HARD drive?

  My old desktop computer recently died of a motherboard failure.  As I understand it, I should be able to install windows 7 from my old computer to the new, but only if I delete the old installation.

  Does this mean that I have to format the old HARD drive?  Because the old computer HARD drive seems to be alive, I would retrieve the data on a new machine first, before I have to format and I need to install windows on the new computer to get the data from the old HARD drive.

  No, it is taken on trust that the old installation is no longer active, there is no mechanism to remove the old license in order to make a valid new. Remove the Windows directory (or rename) makes the old system inoperative.

  You find that the automatic authentication fails on new construction and need to call the licensing Center to check that you have only one installation. Apart from the OEM rules if a license has been activated too often, and recently, it fails in a 1 time.

• try re-installing CS5 on a new hard drive... I forgot to remove my CS5 on the old hard drive... I have the CD of installation of CS5... I've updated from CS3 and have two serial numbers

  try re-installing CS5 on a new hard drive... I forgot to remove my CS5 on the old hard drive... I have the CD of installation of CS5... I've updated from CS3 and have two serial numbers...

  I use a PC...

  Please check Adobe - Creative Suite 5 Master Collection: System requirements and try to install the product, please let us know if you are unable to activate. You can check: error: "this serial number is not for a product calling it" | CS6 cs5, CS5.5,

  I hope this helps.