Replica server not to listen on port 443

Similar Questions

• How do the 5 server not listening on ports 80 and 443

  I want to configure an Apache Server on a Linux virtual machine (using the last VirtualBox) on my Mac running El Capitan 10.11.3.

  5.0.15 server is already running on the Mac (and I want to keep it, with the exception of web services). I have disabled the sharing in the web server user interface, but it was not enough, Apache listening ports 80 and 443, prohibiting VirtualBox to listen to them and transmits them to the Linux virtual machine.

  So I put comment out these lines in /Library/Server/Web/Config/Proxy/apache_serviceproxy.conf:

  #listen 80

  #listen 443

  8008 #listen

  #listen 8800

  8443 #listen

  8843 #listen

  After a restart, Apache seems not to listen to ports 80 and 443 more. However, VirtualBox does not become the listener. I tried this command in the Mac terminal:

  -i sudo lsof: 80

  and nothing has been returned, suggesting that something in OS X still prevents VirtualBox to listen to ports 80 and 443. If I try to convey some random host port of Mac to port 80 in the virtual machine, then I can my virtualized server access from Safari on the Mac host via the custom port said. But I would use the standard port 80.

  Any help really appreciated.

  Instead of commenting, assign a specific IP for the server listen instead of * (which means that all the IP addresses). This is only to the server on port 80 and 443 in this config file. I sometimes give an additional IP address to the Ether. Your Linux Machine can connect to the second IP address or the first initial assigned to your server depending on your configuration.

  Server is very aggressive in it's use ports, he leaves so all services to operate, even if you have the use of ports to other IP addresses.

  Leo

• How can I publish Windows Home Server web access on one port other than 443? Verizon FIOS is blocking incoming 443 so I'm not able to access the WHS remotely.

  I have Verizon FIOS.  They block incoming traffic on port 443.  I have an ISA Server, but were unsuccessful, redirect to 442 on the listener interface and bypass at 443 internally.

  Thank you!

  Victor

  Hello

  Take a look at this thread who can answer your specific question.

  http://social.Microsoft.com/forums/en-us/whssoftware/thread/8c2238da-c4c7-4777-8CE9-b1bb506daf0f/

  However, if it is not, I would say that to post your question in the forum below.

  http://social.Microsoft.com/forums/en-us/whshardware/threads

• Oracle 10g homepage not opening not... Oracle DB not listening to port 8080.

  I installed oracle 11g xe and home page did not come to the top. same thing happens when I installed oracle 10g xe. The homepage can be connected and run sql command line is also not not opening. I checked in services.msc that OracleServiceXE and OracleXETNSListener is running.
  
  Firewall is disabled. Using XP SP3. Already had Oracle 8i and uninstalled and deleted all remaining sound files manually.
  
  I opened cmd and typed-
  
  C:\ > SQLPLUS / as sysdba startup
  
  I got this result-
  
  SQL > startup ORA-01078: failure in the treatment of the system ORA-01565 settings: error in the identification of the files 'C:\oraclexe\app\oracle\product\10.2.0\serv er\dbs/spfileXE.ora' ORA-27041: could not open the OSD-04002 file: could not open the file S/O-error: (OS 2) the system cannot find the file specified. SQL > disconnected
  
  I typed-
  
  C:\ > telnet localhost 8080
  
  I got this result-
  
  Connecting to localhost... Could not open connection to the host, on port 8080: connection failed
  
  I did not the configuration changes to all files .ora and nothing is listening on port 8080. I deleted IE (off the frustration of slow speed), and only have Chrome, Firefox n Safari on my system. Does it matter?
  
  I also disabled WLAN n DB restarted but of no use... Check the LSNRCTL status given.
  
  LSNRCTL > status
  Connection to (DESCRIPTION = (ADDRESS = (PROTOCOL = IPC) (KEY = EXTPROC_FOR_XE)))
  STATUS of the LISTENER
  Alias LISTENER
  Version TNSLSNR for 32-bit Windows: Version 10.2.0.1.0 - production
  ction
  Start date December 2, 2011 10:00:30
  Uptime 0 days 0 h 21 min 31 sec
  Draw level off
  Security ON: OS Local Authentication
  SNMP OFF
  Default Service XE
  Listener parameter File C:\oraclexe\app\oracle\product\10.2.0\server\network\a
  dmin\listener.ora
  Listener log file C:\oraclexe\app\oracle\product\10.2.0\server\network\l
  og\listener.log
  Summary of endpoints listening...
  (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC_FOR_XEipc)))
  (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp) (HOST = guddus-comp)(PORT=1521)))
  Summary of services...
  Service 'CLRExtProc' has 1 instance (s).
  Instance of 'CLRExtProc', status UNKNOWN, has 1 operation for this service...
  Service 'PLSExtProc' has 1 instance (s).
  Instance of 'PLSExtProc', status UNKNOWN, has 1 operation for this service...
  The command completed successfully

  For the removal of Win services, find out about 'sc' (sc delete).

  Path indicators system of additional Oracle installs (ora92...). Who installs is 'in progress' and who is uninstalled?

  What happens if you just to open a command prompt and run oradim?

  What is the oracle.key file exists in dir\bin House xe? What is its content?

• Tecra M3 and Advanced Port Replicator III: not recognized as docking station

  Hello!

  Just install my new M3 and Advanced Port Replicator III. Everything works fine, but the Port Replicator is not recognized as a Docking Station (No disconnect in menu button start XP; pressing disconnect button on the Port Replicator itself has no effect either).

  Is TI WHEREAS behavior?
  Thank you in advance.

  Hello

  You reinstall the unit with the recovery CD?
  As far as I know that the TOSHIBA Mobile Extension3 for Windows XP is responsible for the good condition of the market of the docking station.
  Well, I recommend to reinstall this driver and utility.
  Perhaps the installation of the new driver will solve this problem.

  Good bye

• Error iTunes - iTunes could not connect to the store purchases - if you have any firewall software, make sure it has been set to allow communication on port 443.

  My itunes has been fine. All of a sudden today it now gives me this error: error Itunes - iTunes could not connect to the store purchases - if you have a software firewall, make sure that it has been set to allow communication on port 443.

  I do not have my firewall active. I connected to itunes, quit itunes, reconnected - still a problem.

  Was there an update and now it's a bug? Help!

  Thank you!

  Run the Console application in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  The title of the Console window should be all Messages. If it isn't, select

  SYSTEM LOG QUERIES ▹ all Messages

  in the list of logs on the left. If you don't see this list, select

  List of newspapers seen ▹ display

  in the menu at the top of the screen bar.

  Click on the clear view icon in the toolbar. Then take an action that does not work the way you expect. Select all of the lines that appear in the Console window. Copy to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

  The journal contains a large amount of information, almost everything that is not relevant to solve a particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.

  Please don't dump blindly thousands of lines in the journal in this discussion.

  Please do not post screenshots of log messages - text poster.

  Some private information, such as your name or e-mail address, can appear in the log. Anonymize before posting.

  When you post the journal excerpt, an error message may appear on the web page: "you include content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

• How can I change the default port 443 on Windows Server Essentials 2012?

  I'm trying to install on my server remote access, but port 443 is already in use with another server on the same configuration broadband, so I need to change to allow access.

  Also, what should I change on the computers to connect to this port

  Concerning
  Steve

  Hello

  Welcome to the Microsoft community forums!

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

  http://social.technet.Microsoft.com/forums/en-us/winserveressentials/threads

  
  If you need to change the port for remote access,

  You can search on a lot after u come and change port 443

  
  http://social.technet.Microsoft.com/forums/en-us/winserverTS/threads
   
   
  Hope this information helps.

• How to set up multiple LIVE IDS prod certificates on Sharepoint 2010 single server runs several Sharepoint Sites with different domain on port 443?

  Hello

  I integrated LIVE ID with Sharepoint 2010 and got the same compliance.

  In sharepoint server 2010, several sharepoint sites are run under port 443 with different domain names.

  I configured 1 LIVE ID certificate for one of our sharepoint sites would like to know can I use the same certificate for other sites too or I need to install other certificates LIVE ID to access other sites.

  How can I get prod LIVE ID certificates are available for free as nexus offers two certificates INT and PROD (x 509 certificate) or do I need to buy.

  If I need to buy where can I buy it go?

  Hi ppdremsadm,
   

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums as it is related to the configuration of Live ID in Sharepoint 2010. It should be better in the Forums of Windows Sharepoint.

  Please ask your question in products and technology SharePoint forums to improve assistance in this regard.

• How can I make sure that any firewalls (versions of software or hardware) does not block port 443 to access?

  How can I make sure that any firewalls (versions of software or hardware) does not block port 443 to access?

  Hi Anna_753,

  Usually, you would receive messages from any program if it is impossible to access the port.

  If you want to check if the port is accessible, then you will need to check the firewall settings.

  Each firewall has its own parameters for ports of the computer.

• View not appearing replica server is not in the administration console

  Are having the same problem as this post: replica server connection view do not appear in the Console administrator view.

  Since the replica server, I can see the main login server but can not see all the objects like computers or users.   From the main login server, the replica server does not appear in the dashboard.  I tried to restart both servers to connect and perform the post repadmin commands, I found before.

  Any ideas how to troubleshoot or resolve?

  TIA

  JAR

  I ended up removing the replica software and put it back;  also run repadmin.exe/showrpl and it works.  Reference is also made to this site and got some good tips troubleshooting.

  http://blog.eeg3.NET/2011/03/20/VMware-view-replication-issues/

• Enterprise Manager not working after changing port listener

  Hello
  
  I have Oracle 11g on Linux. I installed the Manager of the company at the time of the installation of the database. Database listener configured on port 1521.
  
  I tried to change the default port of 1521 to 4051. I stopped the listener, the port has changed in the listener.ora and also tsnnames on clients.
  We can connect to the database using sqlplus/sqldeveloper client tools.
  
  When I tried to launch Enterprise Manager, I could not connect (connection error failed)
  
  I scoured the forums of discussions, I realized (read) that I need to change the port number in the Enterprise (targets.xml, emoms.properties) configuration files. I then changed to the new port.
  Arrested agent, stop the dbsoncole, then restart them.
  
  Now I gat page not found when I run the company Manager.
  
  Help is very appreciated.
  
  Murali K

  :)

• Linksys E900 - always listening on port 80

  I just bought a Linksys E900. Even with all access remote triggering, when I scan my public IP, I see port 80 open and Linksys E900 listen to this.

  Starting Nmap 6.47 ( http://nmap.org ) at 2014-12-05 00:30 ART
  Nmap scan report for dany.homenet.org (186.136.xxx.xxx)
  Host is up (0.027s latency).
  rDNS record for 186.136.xxx.xxx: xxx-xxx-136-186.fibertel
  Not shown: 998 closed ports
  PORT     STATE SERVICE       VERSION
  80/tcp   open  http          Linksys E900 WAP http config
  3389/tcp open  ms-wbt-server Microsoft Terminal Service
  Service Info: OS: Windows; Device: WAP; CPE: cpe:/h:linksys:e900
  
  Service detection performed. Please report any incorrect results at http://nmap.org/submit/ .
  Nmap done: 1 IP address (1 host up) scanned in 6.51 seconds
  

  

  If I navigate to my public IP address using a web browser, I can access the web configuration interface.

  Any idea on what is happening?

  By using WAN IP LAN resolves as a local. By scanning from the outside, I see these closed port.

• HTTPS (port 443) for router RVS4000

  Hi all

  I have two servers - one running MS exchange and other running a crm platform and both must be access via https. On the router - I've linked https to an address ip and router refuses to accept the same port 443 to another ip address binding. I'd appreciate any help I can get to solve this.

  The organization chart is attached.

  

  Hello!

  Unfortunately, it is not possible to have same port simultaneously transmitted to multiple internal IP addresses - imagine even if this setting would be possible, how the router will know who to ask what internal server to transmit from the port where the request has been received the same?

  However, with RVS4000 you can perform the following operations - use TCP 443 for Server1 and say that TCP 4443 for server2.

  Assume that your servers have the following IP address allocation:

  Server1 - 192.168.8.100

  Server2 - 192.168.8.101

  In RVS4000, go to Firewall-> simple Port Forwarding

  Set it up as on the screenshot:

  

  After that you can access from the Internet both servers using the following URL:

  Server1 - https://wan_ip_address

  Server2 - https://wan_ip_address:4443

  I hope this will solve your problem!

  Best regards

  Ivan Bondar

  Cisco Small Business Support

• 11g will not be 'listen' SQLDeveloper

  I am an adjunct professor at Northern Virginia Community College and I teach again a SQL Fundamentals courses this semester. The teaching course is not a problem. The problem is to configure an Oracle environment that students can access. I don't have these skills, and Oracle is a very complex environment.
  
  I installed Oracle 11 g on a Windows machine in the computer lab. It's an XP box, but last year students were able to use the installation of Oracle 10 g on it well on her in a nearby classroom. It seemed to install OK, and I was able to connect using SQL * more. I went to one of the lab workstations and open SQLDeveloper, since that was what the students preferred to use year last to talk to the database. In SQL Developer, I put in the following connection information:
  
  Connection name: LO Server
  Username: System
  Password: the one that worked when I installed >
  HostName: does not matter but it is good >
  Port: 1521
  SID: oracle
  
  That's when I got the mysterious Developer SQL error when I tried to connect by pressing the Test button of the SQL Developer:
  
  "Status: failed - Test has failed: IO exception: the network adapter could not establish the connection.
  
  After some research on the web and the discussion with another instructor, we believe that the problem comes from Oracle database configuration, not with SQL Developer. We are able to log into the control panel of database via a web interface of my computer without problem. Our best estimate is that Oracle must be configured to "listen" on port 1521 to 'see' applications for SQL Developer. I found a utility Oracle which supposedly opens the ports, in 1521, was added, but it doesn't seem to work. I have also modified a listener.ora file and added the port, but did not know the exact syntax because it does not work. We stopped and restarted Oracle, even rebooted the machine, hoping he would go away. No luck.
  
  Oddly enough, we ran SQL Developer on the same computer as the database and it gave the same error. It's one of the reasons why we think it's a configuration issue with the database.
  
  I would appreciate any idea that you can provide. I have to learn from mid-August, and it is something that would be probably obvious to a person with the right skills seems to be all that I need trouble. The College doesn't have any support contract with Oracle that I am aware, that they use for most SQLServer. (If there is a way to get free Oracle support, please let me know.)

  Developer SQL can connect two ways

  1. with Java (how you try)

  2. with your Net80 and that one needs a tnsnames.ora

  Developer SQL will use the tnsname.ora in the Oracle home. But since you have two sb92075 was right (again). There might be a conflict, but you try a java connect so I doubt it.

  You posted this

  ORCL =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = TCP)(HOST = LW230-NV85702.nvstu.edu)(PORT = 1522))
  (CONNECT_DATA =
  (SERVER = DEDICATED)
  (SERVICE_NAME = orcl.nvstu.edu)
  )
  )
  

  Note the post (not 1521) setting

  Change this with SQL Developer so that your settings for you to connect it is:

  Username: system
  Password: 
  hostname: 
  Port: 1522
  SID: orcl
  

  mseberg

  Used TNSNAMES adapter to resolve the alias
  Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = LW230-NV
  85702.nvstu.edu)(PORT = 1522)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAM
  E = orcl.nvstu.edu)))
  OK (20 msec)
  

  It confirms the 1522 here too

  Published by: mseberg on July 16, 2011 11:49

  istening Endpoints Summary...
  (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1522ipc)))
  (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=LW230-NV085702.nvstu.edu)(PORT=1522)
  ))
  Services Summary...
  Service "oracleXDB.nvstu.edu" has 1 instance(s).
  Instance "oracle", status READY, has 1 handler(s) for this service...
  Service "orcl.nvstu.edu" has 1 instance(s).
  Instance "oracle", status READY, has 1 handler(s) for this service...
  Service "orcl_XPT.nvstu.edu" has 1 instance(s).
  Instance "oracle", status READY, has 1 handler(s) for this service...
  The command completed successfully
  

  And here. I'm OK he beat to death!

  Published by: mseberg on July 16, 2011 11:51

• Site Web Server not accessible via the internet

  Hello Apple community,

  I had a problem with the.app Web sites, where my site Internet (FQDN) is accessible via the network internal, but not accessible through the internet. I have port ports 80 and 443 passed on my firewall and I can see the ports open via nmap on an external connection.

  When I browse the site via http, I get redirect to 443 then it just resets and I get no error page. Internally, the page redirects to 443 and loads fine with the popup of trust initial cert (self-signed cert) that I then store to my keychain and loading the page well. I get no this pop up via an external network.

  Accessibility is accessible by 80 (green circle icon) but not of 443 for reasons I can't understand.

  I already tried to remedy the situation of the measures:

  Create a new self-signed cert to use. (same results)

  Disable ssl and disable redirection. (causes a load error in the browser)

  Wiped the OS reinstall OS X El Capitan and.app. (same results)

  Checked the port forwarding on my firewall Meraki 15 times (looks good)

  Disabled the feature IPS of the PPE on the Meraki (same results)

  Maybe I'm just on something? I hope someone out there can help.

  Thank you!

  Well, thought about it. < bangs head >.

  ATT Uverse uses port 443 for flow towards Wireless HD receivers in the House. There is a way to change the port it uses, and I'll try and do it later and post my results in case someone else is having the same problems.

  Thinks... "Why the hell ATT would use a common port for Wireless HD? SMH.