Replication ODSEE support matrix

Hi experts,
There is a matrix of replication support? I need to know if multiple master replication between Department 6.x and ODSEE 11 g is supported...
Thank you very much.

Yes it is supported.
See http://docs.oracle.com/cd/E20295_01/html/821-1220/bcasa.html#scrolltoc

-Sylvain

Tags: Fusion Middleware

Similar Questions

  • support matrix

    where can I find support for 11.1.2.1 matrix?

    Here you get all support matrix :)

    http://www.Oracle.com/technology/products/bi/Hyperion-supported-platforms.html

  • support for Windows Server 2012

    Is it supported?  Can someone tell me the documents concerning management of Windows Server 2012?  Thank you

    At this point Windows 2012 was not included on the list of the supported operating systems. According to what storage device, you work with I saw it works fine, it is just not has been added to the support matrix. What devices work with and I can do some tests and see if I ran into all the questions about it. I advise you to just keep an eye on the support matrix for each device on the site www.support.dell.com because it will be added here once all tests completed. Only, I have not heard of an ETA on when that will occur.

  • 5.1 taken U1 ESXi supported with 2.2 (1 c)?

    Hello

    I'm going through the support for 2.2 matrix (1 c) and I don't see 5.1 U2 listed in the support matrix. I see U1 5.1 and 5.5, we have a requirement of 5.1 U2 for a specific installation (EPIC).

    Please let me know if U2 5.1 is supported with UCS version 2.2 (1 c)?

    Thank you!

    Rags

    Ramanantsoa,

    He does not like it is / will be supported.  Always confirm the compatibility here:

    http://www.Cisco.com/Web/TechDoc/UCS/interoperability/matrix/matrix.html

    Note THE answers useful.

    -Kenny

  • RH6.3, esx4.1u3, esxi5.1 support?

    support for platforms powervault matrices indicate support for these?

    We have no ETA if or when the support will be added for these operating systems. I recommend to check the support matrix from time to time and if we find the site www.support.dell.com.

  • Hyperion Planning support for browsers and Windows

    Hello everyone

    I have a question about browsers and Windows that support Hyperion planning.

    Hyperion is compatible with Windows 10?

    Hyperion is compatible with IE 11?

    Hyperion is compatible with Firefox (latest version) 43

    SmartView is heading the bureau 13?


    Thanks in advance.


    Concerning

    MSA

    You will need to provide what version of Hyperion (and Smart View) you are on for people to answer this question precisely as each version is different.

    Your best bet (and should always be your first choice in these issues) is to consult the EPM support matrix

    http://www.Oracle.com/technetwork/middleware/bi-Foundation/Hyperion-supported-platforms-085957.html

  • Tomcat and 11.1.2.4 EMP support


    Hello

    I would like to know if the Tomcat web application server is supported that the last essbase and EMP release 11.1.2.4?

    Thank you

    No single WebLogic is supported (maybe Websphere will be reintroduced at a later stage) that comes with the version.

    Support matrix > Matrices of platforms supported - Oracle Enterprise Performance Management System

    See you soon

    John

    http://John-Goodwin.blogspot.com/

  • vSphere 5.8 and 6 replication

    Hello

    I'm running a vCenter 6 on a site and my secondary site a vCenter 5.5

    I would like to know if I can connect with replication of vSphere. I know vrm 6 is not compatible with vcenter 5.5 and 5.8 vrm is not compatible with vcenter 6

    But vrm vrm-compatible 5.8 6?

    THX in advance for the answer.

    Cyril

    The only support is to upgrade your vcenter seconday to 6.0, and then upgrade your VRM on this site to 6.0/6.1

    * vSphere 5.8 replication only supports vCenter server 5.1 to 5.5

    * vSphere 6.0/6.1 replication support only vCenter Server 6

    * vCenter Server 6.0 Update 1 supports only vSphere 6.1 replication

    I've only seen problems when leaving a VRM on an older version of replication failures, connections between interrupted VRM and so forth, I don't think that same mixed VMware supported versions of VRM.

  • Can someone advise on RHEL 7 comments OS customization support in vCenter Version 6.0?

    Hello

    I need to change the configuration of the NIC through customization of the guest operating system, but I have a problem using RHEL 7.0 guest os customization in vCenter Version 6.0 and 6.0 ESXi

    Can someone advise on RHEL 7 comments customization OS support?

    According to the customization Guest OS Support Matrix (http://partnerweb.vmware.com/programs/guestOS/guest-os-customization-matrix.pdf), Version 6.0 (6.0 ESXi) vCenter supports for customization of RHEL 7.0 guest os but it keeps showing error message as below

    Error: customization of the guest operating system "rhel7_64Guest" is not supported in this configuration. Microsoft Vista (TM) and Linux guests with the logical volume Manager are supported only for the recent host ESX and VMware Tools versions. Refer to documentation vCenter for supported configurations.

    Concerning

    Are installed and running VMware tools? If so, which version? And you use VM opened since RHEL repository tools or tools provided by VMware?

    For customization of open tools for VM and Linux OS, you must make the package open-vm-tools-deploypkg installed, which is not part of the base open VM Tools:

    Install the plug-in in a virtual machine Linux deployPkg

  • CF2016 is supported on Windows 10

    Hello

    CF2016 system requirements here:

    https://helpx.Adobe.com/ColdFusion/standard/system-requirements.html

    does not support Windows 10 list.

    CF2016 will support the Windows Server 2016 when it comes out?

    Cordially, Carl.

    Yes, CF2016 is supported on Windows 10. Here is the https://helpx.adobe.com/pdf/coldfusion2016-support-matrix.pdf Support Matrix

    Kind regards

    Anit Kumar

  • V2 Intel E7 processors do not support virtualization!

    Hi everyone having issues with Intel these days.

    When you check the specifications of the CPU Intel E7 v2 family there no virtualization VT - x support in the record.

    Please see link below the list of processors intel supports virtualization.

    http://Ark.Intel.com/Products/VirtualizationTechnology -> E7 No. v2 processors here...! ?

    Also check in with an E5v3 in snapshot comparison table attached. There is no virtualization technology.

    ARK | Compare Intel & amp; #174; Products

    When you check the Vmware support matrix, this CPU seems to be very good for virtualization.

    I'm confused. Same Intel USA cannot give a clear answer to this question. So if there is no employee of VMware here, could you please escalate my request?

    Thanks in advance.

    Today, I see that they have updated the plug. Now, it is well

    Looks life officially E7 V2 CPU virtualization support

    http://Ark.Intel.com/products/VirtualizationTechnology

  • View 6 does not support the 2012 server as a host for the connection to the server operating system

    If I do some preparation work for a view upgrade 6.0 (from 5.3).  After skimming the documentation on the operating system for connecting servers, I notice that Server 2012 is not supported, but Server R2 2012 is.

    I can get it for the installation of "resolution of compatibility issues" for the installer, but rather, I don't throw a facility "not supported" in the production.

    Does anyone know the reasoning/logic behind this?

    Most clients use the R2 versions, it's the fundamental reason.

    The smaller support matrix, faster than we can make good QA on the targeted OS versions and this means that we can release the software more quickly.

    Linjo

  • If CentOS 6.4 is supported by vCAC 6.0?

    Dear members of VMware:

    I checked the vcloud-automation-center-60-support-matrix.pdf and found the CentOS 6.4

    figure in the list of operating systems support guests as below:

    Support for Guest guest OS Agent customization Support

    CentOS 6.4 Yes

    But when I deployed guest VM running CentOS 6.4, there always get the following error messages

    After viewing the details request state:

    Query failed: Machine lab-vcac-009: CustomizeVM: [CustomizeVM_Task] - customization of the guest operating system "centos64Guest" is not supported in this configuration. Microsoft Vista (TM) and Linux guests with the logical volume Manager are supported only for the recent host ESX and VMware Tools versions. Refer to documentation vCenter for supported configurations.

    The agent host VMware Tools and Linux are bothed installed and configured successfully, and

    strange thing is that, in the same environment for the 6.4 RHEL deployment VM

    successfully.

    I don't know how to find the solution, and what's wrong with it?

    Your response is much appreciated.


    Best regards

    Danny

    Hello Grant:


    "Deploy your model of CentOS in vCenter as Type of OS - Linux > Red Hat" is achievable.

    Thank you!

    Best regards

    Danny

  • HP DL360 Gen 8 - supported in ESXi 5.1 U1?

    Hey

    Just 4 new generation 8 HP DL360ps and VMware support matrix is not those listed, but it has HP DL380 Gen 8 s.

    is it just a timing thing and they have not been approved yet, because they are so new?

    ESXi installs ok, except for a mistake of memory in the condition of the equipment...

    Thank you

    Roger

    It is listed. And it supports recent 5.5 also.

    Visit this link VMware Compatibility Guide: search system

  • EM 12.1.0.3 does support Oracle DB 12 c as target database and repository managed?

    Oracle has published the week last control of cloud EM 12.1.0.3.  The certification on My Oracle Support matrix lists not Oracle 12 c as a basis database target or taken managed repository support.  Is the matrix of evil cert, or Oracle has no version control of cloud that supports the database of 12 c?

    Thank you

    Database Oracle 12 c is taken in charge as a managed target - but not as a repository. MOS is updated to reflect this shortly.

Maybe you are looking for

  • I can't buy Final cut pro

    my name is 'MooThaw' and today I went to buy 6 $ 50 iTunes card and I plan to buy a "Final Cut Pro", but I can not buy it and I really need help because I never bought expensive like this before and I thought it was in the app store and in my opinion

  • iPad support external drive Pro

    Hey! I want to improve my office as soon as possible and I watched the keynote yesterday when the new iPad Pro was released. I thought about buying a new MacBook, but when I watched the keynote I was wondering if it would be possible to buy an iPad P

  • Desktop startup problem (running windows XP)

    I keep my desktop using "start" and "turn off computer" four days ago.    Now, when I try to turn on the computer the power button lights up but the system does not start.  One of the buttons on the monitor says "in power saving mode, press a key or

  • System Restore error 0 x 80042315... Help!

    I had some computer problems so I thought I would try a system restore. Then, I had (and continue to receive) a message that says "no restore points were created on your computer's system disk. To create a restore point open System Protection. I do i

  • Help! Cannot access the user account control settings!

    I have disabled UAC today because I wanted to delete some files. However, it did not work so I went back and tried to click on UAC to allow him once again, but I can't. The UAC window is not pop up. Help please! I also created a new account but I cou