Replication with multiple DBs in an environment

Similar Questions

• Strategy for the SSO with multiple vCenter servers.

  We are upgrading vSphere/SRM 5.0U1 for vSphere/SRM 5.5U1 with multiple vCenters in our environment. After reading 2058239 KB:

  VMware KB: installing vCenter Single Sign-On 5.5 on a Microsoft Windows platform

  We install SSO on a separate Windows Server and choose vCenter Single Sign-On for your first server vCenter Server for this first instance. Now my question is for the following facilities as the vCenter for MRS or vCenters which manages areas replacement fault which option, existing site or new, do we choose? Thank you

  
  

  You have therefore three sites.

  The first time, you will choose vCenter Single Sign-On for your first server vCenter Server.

  For the second one on the same site, you choose existing vCenter Single Sign-On for an additional vCenter Server in a site.

  Now, when you come to an another site vCenter and third, you will need to decide if you have a site that is your main or you want to still have a site on the second.

  If you decide to join at the elementary level, that you will yet choose existing vCenter Single Sign-On for an additional vCenter Server in a site.

  If you choose to have another site, you choose vCentre of Single Sign-On for an additional vCenter Server with a new site.

  The end of it, you will have to make the decision to design. I can only tell you what they mean. Make sure you have adequate connectivity between sites.

• replication with more of a naming context?

  Hello

  Well, I want to replace our very old OID with OUD installation (for database Oracle Net services) but I am facing a problem more.

  I have 2 naming context dc =, dc = domain, dc = org and dc = everyone.

  I created the domain controller = everyone with DOHAD (Configuration-> Create local naming context for database Oracle Net services).

  I am able to query entries in each context.

  So I decided to install another server for HA and using replication.

  I installed on the second server with the same option and the same procedure (stand alone and for the Oracle Net database services).

  I created the domain controller = everyone on the second server.

  Then, I used dsconfig to create the replica server on port 8989 on two server.

  I created the new domain of replication for my two contexts with dsconfig-> replication-> synchronization-> field of replication management provider menu-> create new domain of the replication.

  The option list to show me the two areas.

  But when I do a dsreplication-> enable replication, I don't have that cn = OracleContext or dc =, dc = domain, dc = org or cn = OracleContext, dc =, dc = domain, dc = org.

  No trace of dc = world or cn = OracleContext, dc = everyone.

  Is it possible to reproduce multiple naming contexts, and what is the procedure to do?

  Even with the DOHAD and Topology Manager, I see that the domain controller = ma, dc = domain, dc = everyone.

  Thank you

  Hello

  Well, I found why the replication was not working for a context.

  I don't have to create an area of replication with dsconfig before.

• Limiting errors while working with multiple connections

  I am currently evaluating Developer SQL and I'm looking for most of the features that allow connections several clearly distinct to avoid DBA errors when working with multiple connections in parallel.
  Currently, it seems that developer SQL provided these features:
  -Organization of folders in Explorer-> for example, we can create a folder per environment (DEV,...).
  -name of connection-> each user can define his own name. These aliases will appear in the tabs and the title of the main window when opening a connection.
  
  These features ar fairly limited if you compare with a tool like Toad, which used to associate colors with connections (good feature!) or define custom fields. In addition the database user is not displayed in the SQL Developer interface, unless we add in the name of the connection...
  
  Do you know if there are plans to improve these features in future releases of SQL Developer?
  Or, otherwise, it would be possible to quickly develop a plugin that can provide? (especially on the colors of connections)
  
  Thank you.

  Hello

  I opened the application, and you can add your voice to this. This isn't a feature that we can control, nor is it something that you can expand as it should be expelled from the underlying IDE. We requested a change in the IDE so that we can implement this improvement.

  Sue

• El Capitan permissions bad for lib with multiple users

  On my Mac with multiple users and running El Capitan, I encountered a problem with an application (GoGlobal) failed to start with "errno = 13", which is a problem of permissions with usr/local/lib /.

  I determined that on Yosemite, usr/local/lib was owned by root and permissions: drwxr-xr-x. However, on El Capitan, usr/local/usr / local / lib lib is owned by one of the nicks (random?) and has permissions drwx-, which is the source of the errno = 13.

  I got around the problem by chmod 755 to lib /, but I fear that a future update will reset these permissions impassable previous values. Please correct these settings in install and update routines.

  GoGlobal isn't a request to Apple. You can send your message to the developer, who develops not only the Application itself, but the installation script that puts in place of its components.

• I use 4 windows with multiple tabs, but I 'don't know why one of them (window) always close when I restar computer

  I use 4 windows with multiple tabs, but I 'don't know why one of them (window) always close when I restar computer

  Hello, by default the firefox session restore feature only allows you to save last 3 windows open. to change this, type on: config in the address bar of firefox (confirmed the message information where it appears) and search for the preference named browser.sessionstore.max_windows_undo. Double-click it and change its value to 4 (or more).

  http://KB.mozillazine.org/browser.sessionstore.max_windows_undo

• Can bookmarks be portable to multiple computers? Is it an option to connect and use my favorites with multiple computers and locations? Thank you

  Can bookmarks be portable to multiple computers? Is it an option to connect and use my favorites with multiple computers and locations? Thank you

  https://support.Mozilla.com/en-us/KB/what-Firefox-sync

• How to export to pdf 1 sheet in a document with multiple sheets

  As the title says, my numbers document has several sheets.  I need to export one of these sheets as a pdf document, but instead it exports all sheets in a single PDF with multiple pages (1 page per sheet).

  Grateful for your help!

  Hi Michele,

  Instead of export, go to the sheet you want and use the Menu > file > print.

  In the Print Setup Panel, choose this sheet.

  Click on print... to see the print dialog.

  At the bottom left, click on the PDF pop up.

  You can open a PDF in preview (and print it from there), or print in PDF format.

  Click done to return to your document.

  Kind regards

  Ian.

• Indicator of waveform data dashboard with multiple locations

  I have a chart in waveform with multiple locations on my main VI running.

  I use the Application Dashboard data 2.2.1 on my Ipad to monitor table of wave shape of my running app.  I placed a marker on my Ipad and also related waveform with my waveform array variable.  I can't play my data dashboard application because it shows unable to connect to the server.  I noticed that it is because of multiple plots being plotted on my table of waveform.

  I could only play the App data dashboard when it is just a single parcel related to an indicator on the App.

  My question is if it's possible to have a graphical indicator of waveform on a data dashboard that has several plots being plotted and not only a single square, and how to configure it?

  Thank you.

  Click on Bravo and select as an accepted answer.  You are welcome.

• Using Outlook Express 6 with multiple identities.

  Had the hard drive problems.  He has been replaced by Dell warranty.  I have set up outlook express 6 with multiple identities.  I can't go from one to the other identity and return to the original, without having to restart my computer.  Dell has said that some things need to be changed to make it work properly.  They tell me what they were without a heavy load.  I used to use this feature with my old hard drive.  Help me please if you can...  Thanks in advance.

  Hi El KG,

  1. do you receive error messages or error codes?

  You can read the following article and check if it helps:

  OLEXP: "identity switch canceled" when starting Outlook Express

  http://support.Microsoft.com/kb/224463

  Also check the following links:

  OLEXP: How to create and use identities in Outlook Express 5.x and 6.0

  http://support.Microsoft.com/kb/209169

  http://www.Microsoft.com/Windows/IE/community/columns/identity.mspx

  http://social.answers.Microsoft.com/forums/en-us/outlookacct/thread/b53f3c5a-3733-4510-91dB-a23dc6224fc5

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Problems with multiple monitors for critical update Windows 7

  Since the update critical October 1, I can no longer run multiple monitors.

  According to the record, this update made changes at the same time the driver for my AMD Radeon 7470 and Dell monitor 1.1 card, and I've updated the software.

  Devices for work and when I pass cables or remove cables. Yet they are simply not recognized as connected.

  Hello Kent,

  Thanks for posting your question on the Microsoft community.

  Thank you for details on the issue.

  This problem may occur because of corrupted or incorrect display settings.

  I suggest you run the hardware and devices Troubleshooter and check.
  Reference:
  Open the hardware and devices Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Please also read this article and check.
  Work and play better with multiple monitors
  http://Windows.Microsoft.com/en-us/Windows7/work-and-play-better-with-multiple-monitors

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• How can I actually talk to support multiple issues with multiple devices (software, hardware, account of the question?

  How can I actually speak to technical support issues to nulitple with multiple devices (software, hardware, account problems,) I have a touch screen of hp with windows 7 Home, Ipod, home router wireless, boost, WiFi, wii, etc.... Problems with windows live net Passport vs msn Id, problems with zune vs itunes and windows media that nobody wants play nice together.

  My touchscreen notes will use only a google account, music another program, and of course until recently google was not an option on the windows phone. of course if I'm going now that I'll lose all the games and music. His tent so frustrating of any help, that nobody seems to know how often these devices and programs interact (or care) HP has been of little use, even for my provider windows, microsoft, living cells and zune etc...

  All the changes that took place this last month will help but gets boring. I consider myself pretty computer savy, but maybe not, should not this difficult. I realized about a year ago I would have hired a technician but it seems immpossible to find someone who knows enough about all of the equipment and software to really do some good. My Hp touchscreen computer does not even play nice with their own HP printers. I really regret the time and money I spent. I could every Mac.

  All of the suggestions. Even your options do not address several problems of interaction with the hardware and software all needs of problems to adapt to a single category.

  Hello

  
  To correct the software issues run the methods mentioned below.
   
  Method 1: run the troubleshooter and check if the problem is resolved.
  http://Windows.Microsoft.com/en-us/Windows7/open-the-performance-Troubleshooter
  
  Method 2 : run a SFC (System File Checker) scan and see if the problem occurs.
  http://support.Microsoft.com/kb/929833
  
  Method 3 : run Clean boot and check if the problem persists.

  
  To help resolve the error and other messages, you can start Windows XP, Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  
  Note: follow step 7 to reset the computer to start as usual after the boot process.
  http://support.Microsoft.com/kb/929135

  To solve the problems related to Windows Live and MSN to check the links below on contact.

  
  After the question in the links below
  http://support.Microsoft.com/kb/940784
  http://windowslivehelp.com/
   
  To solve the problems related to the HP touch computer
  
  Update the HP touch drivers from the manufacturers Web site.

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  If you need to talk to a Microsoft technician, then you can check the link below http://support.microsoft.com/kb/295539

  
  Hope that helps.

• Problem with multiple downloads with the router. Allows you to change the TCP MSS value?

  Original title: TCP MSS

  Hi all.

  I currently have a problem with multiple downloads with my current router.  If I have two current downloads at the same time I have no access to all web sites.  It's almost as if the downloads take my meaning of bandwidth there is more nothing for ordinary surfing.

  As a test I put an older router on my system and have a significant improvement in performance.  I have 2 downloads in progress and also surf at the same time.

  To compare two routers, I noticed that the only real difference between the two is that the TCP MSS value is set to '0' on the router of the problem, and then assign him 1392 (MTU - 40) on the router to elderly who gives better performance.

  It is my understanding that this value governs the size of transmitted packets.

  My question is this:

  What is the MSS value which is causing the problem?

  Congratulations in advance.

  Be sure to interpret the values. The '0' means no not literally because the link would not work. It is likely, that it allows the local device set limits for the link. Don't forget that there is a Maximum value and as such can be any value up to such limit as defined by all devices in the path.

  You can try capping manually but it is unlikely that any local limit will come to effect unless you set very low.

• RV220W - rules of access/redirection of port with multiple WAN IP addresses

  I just installed a Cisco RV220W - that works very well for outbound traffic, however for incoming it seems unable to work with multiple WAN IP addresses.

  We have a block of 6 WAN IPs assigned to us by our ISP, and I want to use each of them to expose certain ports on our servers to the outside world.

  I tried to do with rules (by using HTTP, for example) with the following parameters:

  Connection type: Inbound (WAN (Internet) > LAN (local area network))

  Action: Always leave

  Service: HTTP

  Source IP: Unique address

  Start:

  Send to the Server Local (DNAT IP):

  Use other WAN (Internet) IP address: disabled

  Status: Activated

  However, the port of the inaccessible Server/rest.

  I tried:

  • Restart the server with power power off again
  • implement the same port forwarding settings
  • triple-checking all the IP addresses used

  The only way that I have working is by changing the access rule so that it applies to any specific source rather than to another address... but this isn't a solution for us because we need to use specific IP addresses to the internal servers/ports specific.

  The interface of the router admin certainly suggests that this should be possible, but using it seems to break all incoming access!

  Any suggestion is welcome.

  You must use "ANY" as the source IP address, you publish your internal server to the internet and the internet means that the request comes from any source IP address (you don't know what it is, so that's all.

  Basically, you want any source IP to hit one of your WAN IP on port 80, and then your firewall will redirect the request to the internal private IP address of the server on the same port 80. And when the answer comes back internal server, the firewall will already have this translate entry in and reverse NAT won't happen (you must configure it, the default firewall function).

  I hope that I have answered your question.

  Please mark as correct, if you like the answer.

  Thank you

• Single unit with multiple clusters CCM

  I know that this horse has been beaten to death, but I couldn't find a specific answer to my question.

  I understand with multiple clusters, each CCM to the unit calls go on Ports configured as such in each cluster. I also understand that MWI notification is sent by the highest numbered track and he's working his way down until it is successful. What I don't understand, is how to transfer out of the unit for the expansion of the Subscriber. How do I know what CCM Cluster to send the call to unity? He sends it on the main cluster and this group is responsible for the routing of the call on an inter-cluster trunk? Or should he behave as MWI where he tries to send calls from the highest numbered port until it is able to place the call?

  All calls from the unit (transfer and the identical outdials notification message) are only made on a port, the call is not retried on other ports like MWIs.

  The difference is that for communications, the unit will use the last available on the last group port. If you need to have put ICT in place correctly so the call can get routed to the correct phone on another cluster.

  For transfers, the unit will initiate the transfer using the same port that the call is entered in the. So if the transfer is supposed to go to a phone on a different cluster, yet once you have your ICT implemented between clusters so that the unit can transfer a call from one group to the other.

  In both cases, the unit simply connect, he does not know if the phone is in the same cluster or another cluster. So you must make sure that the dial string that uses the unit, as well as models of dial in CCM, download the call routed correctly through the TIC.