Report column width and control region

Similar Questions

• The report columns duplicated when the region is copied.

  Re: Report columns duplicated when the region is copied.
  
  When I copy a region that I created the form master / detail report columns are duplicated. I am actually copy the entire page, but I had other cases where I just copy the desired region and the columns have been duplicated it as well. And, of course, there is no way I know to remove the columns of the shape. But I doubt it would help because, in some cases, I've tried - the columns seems to be 'related' in that a change to a copy of the column has been duplicated in the other, when changes have been applied.
  
  In the example (below), there are three areas on the page and the problem occurs in region 2. (I think I'll probably remove the first region). He was ripping trying to get the report of region 2 and changes formish tabular region 3 on the same page. I made this in Oracle 11.2 in our APEX 4.1 and imported to 4.2. You can see here:
  
  WS apex_examples_01
  demo
  demo
  Appl. 991204
  
  Page 57 is the original page created in 4.1 and imported
  58 page is the page copied from 57 under 4.1 and imported
  59 page is the page copied from 57 under 4.2 (same result 4.1).
  
  If you want to try the page, select DSD01 in the DSD LOV, click on "Application process" and then click the icon change. Ignore errors in the region 1 - I'll probably delete this region. The data are region 3 is Run Date may 12, 13.
  
  Is there a setting that allows this region can be fully copied without duplicating the columns?
  
  Thank you
  Howard
  
  P.S. I think I know why this is happening: APEX hates me!

  Howard (in training) wrote:

  P.S. I think I know why this is happening: APEX hates me!

  I think it's a trap left by tabular, tabular forms of sabotage tabular forms... I love ;-)

  This is a long-standing bug very (+ {: identifier of the thread = 269916} +) that I've seen before: + {message identifier: = 10504044} +.

  The problem in the region created by Wizard of origin not having either do not report Source using specific query column names and validate queries / use column names generic (analyzing the query executing only) options selected. Click on the radio button using specific query column names and validate query before copying the region/page. Compare the before and after effects of do so on pages 570 and 571 in your sample application.

  (Looking for the Forum before posting?) Previous discussions were not hard to find in this case.)

• How controll in the report column width?

  Dear all,
  
  I created the classic report, but here the column width is too large.
  I want to the column width of the control in the report.
  
  How can I do this...
  
  
  Thank you

  I use Apex 3.2.

  It's a shame. Just try to change:

  Report--> Column--> column formatting attribute--> Style CSS

  for width: 100px

  Also make sure that your text to column heading to enough short to fit into the column.

  Rod West

• report column width

  Hello
  
  Can I change the width of the interactive reports columns? I have 22 columns, and it is not so nice.
  
  Thank you.

  Use the CSS in the header HTML page or a custom stylesheet:

  where COLUMN_NAME is the alias column to uppercase.

  Search the forum for more information: there are several previous discussions concerned with various aspects of this.

• column width of control

  How in general do people control column width issues? I have a form
  with a few horizontal radio buttons that cause the column, they are in
  to be too large. To the bottom of the form, I need to be more slender columns.
  What are some ways to control this? I thought that if I gave the scale
  Radio keys colspan high numbers that could be, but then that
  It has improved things it did not remedy the problem. Do I have to move items
  in distinct subregions?

  In "Drag and Drop" layout, you can add a "start and stop a HTML Layout Table" between the rows in the table.

  "Attributes of the HTML table cells' for the label and 'attributes HTML Form elements to the deposited data, you can add something like - style =" width: 150px; " color: #085ff1; ' make-weight: bold ".

  Kind regards

  Steve Welch

• Is it possible to have a fixed column width and a URL link?

  I'm trying what a popup link on a column in a SQL report, but also have the report column a certain width. Can I have or not however at the same time.
  
  What I did was created a SQL report, published a column and he gave a URL redirect (page in application) as usual.
  
  Fixed column width, I used:

  <div style="width:250px; height:54px; overflow:hidden" title="#Comments#">#Comments#</div>

  The formatting of column / Expression HTML
  
  And for the URL of the popup, I used:

  onclick="window.open(this.href,'_blank','resizable=0,scrollbars=0,width=650,height=300,menubar=0,location=0');return false;" title="Comments"

  On the column link / link attributes

  Hello

  It is possible that there is an error in your code - shows your snapshot & 523. -the & and the. should not be there. If you have changed to that of & APP_ID., then you don't need the & or the. but, normally, you should leave as & APP_ID. as the value for this will change when you move from dev to test for prod and Apex will automatically replace this string with the number of correct application.

  Andy

• The envelope and the interactive report column width

  Apex 3.2

  I have a column in an IR data type is varchar2 (4000).

  I want to restrict this report to a width of 200 column and if the text is longer, it should go on the next line.

  I've tried several things (in the HTML page header

  For example

  < style type = "text/css" >

  #apexir_LONGDESCR {width: 200px ;}}

  < / style >

  < style type = "text/css" >

  Th #LONGDESCR {}

  Width: 200px;

  }

  TD [headers = "LONGDESCR"] {}

  Width: 200px;

  dressing: break-Word;

  }

  < / style >

  < style type = "text/css" >

  TD [headers = "LONGDESCR"] {}

  Width: 200px;

  dressing: break-Word;

  }

  < / style >

  Nothing seems to work.

  Any advice appreciated

  Gus

  Theme 15 trigger rendering quirks mode in IE8 which does not support the td[headers="LONGDESCR"] attribute selectors, where your problems above.

  Quick and dirty approach: wrap the column LONGDESCR in a div in the query and the whole of the column display as column report Standard attribute:

  '

  ' || longdescr || '
  ' longdescr

  It will be however cause problems elsewhere with HTML code that appears in IR filter, export etc.

  More refined approach: apply the style using JavaScript instead of CSS. Using jQuery in this app?

  Best approach: pass the time, all this takes in the upgrade to the latest version of the APEX and a decent browser.

• How it is possible to create the chekbox in interactive report column header and select all the features.

  Hello

  My requirement is

  Interactive report the first element of box check columns and the topic also point check box.

  If I click on the element of box section columns and then automatically select all the lines in the box.

  Select all / deselect all interactive report header check box.

  Kind regards

  Arianne.

  Check this box

  https://Apex.Oracle.com/pls/Apex/f?p=76604:2:111027941779152:

  username:-test

  password:-test

  SELECT

  APEX_ITEM. HIDDEN (2, null, null, 'f02_': rownum) |

  APEX_ITEM. CHECKBOX2 (P_IDX-ONLINE 01,

  P_VALUE-online null,

  P_ATTRIBUTES-online null,

  P_CHECKED_VALUES => NULL,

  P_CHECKED_VALUES_DELIMITER => ':',

  P_ITEM_ID-online 'f01_ ' | ROWNUM,

  P_ITEM_LABEL => ' label for f01_ #ROWNUM # ')

  as Delete1,.

  of the double

  Choose the column type: report

  in the heading of column delete1

  Simply put

• Uneven column width and spanning

  So, I would like to create a grid with two columns of different widths. From what I can tell, the only way to do this is to manually set the column on a master page guides and then sink in my text.

  The only problem is that InDesign creates frames separated for each column instead of a frame of 2 columns. I can't have any models ¶ cover the columns.

  Does anyone have a creative solution for this? I really prefer not to use separate text blocks any time I want on columns.

  Thank you

  Chris

  I think you pretty much a handle on it. Spanning columns works only in a framework of several column, not with frames are muticolumn executives still do not support the unequal widths, so essentially what you want to do is impossible how you want to do.

• The report column width

  I created a report that is classic, some columns given for this report happen to subsequent line, how can I get them to single line?

  Welcome at any time

  Please, mark the post the post as Correct to close the message

  Concerning
  Mahmoud

• How to set the column width fixed in IR APEX 5

  Hello

  Is it possible to resolve to a specific column of an interactive report on a fixed width?

  Thank you

  Jos

  Jos Dols says:

  Theme: 42

  The column value contains HTML tags, so I updated the property escape special characters No..

  However, because of the value column extends out of the window so that the user must scroll to the right to view the columns of the other/next:

  

  So I want to report column width be less than 100%.

  Add a static ID to the IR column and set the column width required using a style sheet in CSS Inline property page:

  th#static-id,
  td[headers="static-id"] {
    width: 16em;
  }
  

• Change the width of a region

  I have several regions in my form, which are diiplayed in columns 1 and 2.
  I don't know why, but among the regions of the column 1 is wider than that, while it overlaps a little with the regions of column 2. There is no need that this region is so broad, since there is more enough space so that it displays the data.
  So, how can I change this? Is it a setting in 'Attributes of the region' or maybe "region HTML table attributes of cells" or something else? Thank you.

  Hello

  OK - I think I'm kind of there, maybe maybe!

  I've updated my test page to include a huge report at the top right: [http://apex.oracle.com/pls/otn/f?p=26164:9]

  The regions use the same position as yours and I did the first 2 on the left and down 1 right use the model "Bracketed".

  Now, your questions...

  1. it is because there is a placeholder for the buttons next to the title of the region. If you are referring to the Bracketed area model, you will see:

  <tr>
  <td class="t2RegionHeader" valign="bottom">#TITLE#</td>
  <td class="t2ButtonHolder" valign="bottom">#CLOSE#   #PREVIOUS##NEXT##DELETE##EDIT##CHANGE##CREATE##CREATE2##EXPAND##COPY##HELP#</td>
  </tr>
  

  You can change (better to take a copy of the model and work on this):

  <tr>
  <td class="t2RegionHeader" colspan=2 valign="bottom">#TITLE#</td>
  </tr>
  

  2. you can add a few HTML regions that use "No. Template" and containing only & amp; as the Source. Put them in column 2 and the regions to go on the right in column 3

  Andy

• Column width classic report apex 5.0

  Hello

  Using the latest version of the Apex

  version: 5.0.0.00.31

  Information of the database: Oracle Database Enterprise Edition Release 12.1.0.2.0 12 c - 64 bit

  Theme: Universal Theme,

  Models Page and the region: Standard

  I wanted to know what is the correct way to set the width of a column on a classic report in the new theme.

  I have two columns in the classic report and uses the form fields Stretch on model options in region I need the report to take the entire length of the region.

  I want to control the width of the first column to take less bandwidth. Currently, each column is set to 50% each.

  Please provide your suggestions.

  Hi Madhu,

  Go to the Page attribute

  under CSS-> Inline-> put the code below

  td[headers="JOB"] {
      width: 200px !important;
  }
  

  Here, instead of WORK put the column heading that you want to increase the width

  Kind regards

  Jitendra

• How to adjust column widths individual classic SQL report

  Hello

  I use Oracle APEX v4.2 with IE8 browser and basically tries to adjust widths of individual columns in my classic SQL report. Basically, I have three columns I want to spacing, so that the width of the entire region for the report is used, but am not sure how to proceed.

  I drilled in individual columns and specified the column widths as the element, but in vain.

  Would appreciate help on how to do this for each column and hope that I do not need to change the model of report (if possible).

  Thank you.

  Tony.

  Tony F. says:

  I use Oracle APEX v4.2 with IE8 browser and basically tries to adjust widths of individual columns in my classic SQL report. Basically, I have three columns I want to spacing, so that the width of the entire region for the report is used, but am not sure how to proceed.

  There is an element of uncertainty in what we suggest as well, because you have not specified the theme and the report of model that is used. This information is required for any question of formatting or the visual layout.

  I drilled in individual columns and specified the column widths as the element, but in vain.

  Report in some themes templates may be missing in the #COLUMN_WIDTH substitution string # required for use of the declarative column widths, as shown here: Re: width of column in reports

  I don't know why it would be missing from a theme of so-called "modern" (perhaps the lack of documentation affects even the Oracle theme designers), but you can add it to the models listed in this thread.

  Width of the element applies only to controls on a form in a table.

  Would appreciate help on how to do this for each column and hope that I do not need to change the model of report (if possible).

  This can be done using selectors CSS attribute (for the themes of quirks mode non-traditional, because you are using a legacy version of IE). Add a style sheet in CSS Inline property page:

  #ALIAS,
  td[headers="ALIAS"] {
  width: 40%;
  }
  

  where the ALIAS value in the attribute selector matches the required column alias, and the width property specifies the column dimension required and the units.

  Note that the percentage widths will be compared to the width of the report table. Therefore, it may be necessary to also specify widths (100%) for the table of report and its components. Exactly how is based on the report, the region and the page templates and theme used, information that was not provided.

• Set the column width in the report

  Hello

  I have a standard classic report in one of my applications.

  I want to set the width of the column of the report and but not in pixels, it should be in percentages (%)

  In the attributes report in each column, there is a column width text field, but it accepts only the pixels and percentages.

  Last Version 4.1, database 11g

  Thank you

  RameshP, OracleAPEXDeveloper wrote:

  I have a standard classic report in one of my applications.

  I want to set the width of the column of the report and but not in pixels, it should be in percentages (%)

  In the attributes report in each column, there is a column width text field, but it accepts only the pixels and percentages.

  Use CSS. Add a style sheet in the header HTML property page:

  th#ALIAS,
  td[headers="ALIAS"] {
    width: 40%;
  }
  

  where the ALIAS value in the attribute selector matches the required column alias.

  Please note that the specified percentages compared to the width of the report table. Therefore, it may be necessary to also specify widths (100%) for the table of report and its components. Exactly how is based on the report, the region and the page templates and theme used, information that was not provided.