reports on the problems and solutions; AuthenTec Driver

Similar Questions

• reports on the problems and solutions has stopped working message all the time

  I can't access the control panel reports of problems and solutions and constantly get one - problem reports and solutions has stopped working, message on the screen.

  How can I disable or fix this problem.

  Hi NickMeyer,

  1. have you made a recent software or hardware changes to the system?

  You can check if there is information in Event Viewer which may help us to solve the problem:

  What are the information contained in the logs of the event (Event Viewer)?

  You can also temporarily disable the security software and firewall installed on the system and check if the problem persists.

  Note: Be sure to enable the security software on the computer after checking.

  Hope this information is useful.

• reports on problems and solutions

  under my reports on the problems and solutions, I get the following. (

  Description

  Signature of the problem

  Additional information about the problem

  I have Home Basic windows on a Toshiba laptop and running kaspersky internet security 2012. I have no idea how to read this or what it is. Help, please. Thank you

  Hello

  Method 1:

  Check the link and try to run the Microsoft Fix it:

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Method 2:

  I suggest you to disable and re-enable the USB controllers:

  a. click Startand then click run.

  b. type devmgmt.msc, and then click OK. Device Manager opens.

  c. expand Bus USB controllers.
  Note: You need to scroll the list to find this point.

  d. right-click the first USB controller under USB Bus controllersand then click Uninstall to remove it.

  e. Repeat step 4 for each USB controller is listed under Bus USB controllers.

  Note: restart the computer. After the computer starts, Windows will automatically check for changes on the hardware and reinstall all USB controllers that you uninstalled.

• Cannot clear history of the problem and the Solutions

  I have a problem who hung out in my reports on the problems and Solutions that I can't remove. Its been there since I installed Vista on my system and refers to a mistake of installing raid drivers.

  I have since installed drivers, but whenever I try to delete the problem, or clear the history of the problem, I gives me an error saying simply "Impossible to delete 1 Item.

  Anyone know how I can go about deleting this?

  Thank you
  Jason

  Try to use one of the following free products to remove the file/folder.  Unlocker to: http://www.softpedia.com/get/System/System-Miscellaneous/Unlocker.shtml or file Assassin http://www.malwarebytes.org/fileassassin.php (with or without forcing the deletion: http://www.mydigitallife.info/2008/12/27/force-delete-cannot-delete-locked-or-in-used-files-or-folders-with-fileassassin/). These programs often work when normal functions remove Vista not work correctly.

  If it still does not work, try to start in safe mode (repeatedly press F8 during the boot process until the menu appears) and try to use these products to delete the file in safe mode.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• I have a desktop with Windows Vista. Many times, the screen is the gel with an error massage "video Mode not supported". What could be the problem and the solution. ?

  I have a desktop with Windows Vista. Many times, the screen is the gel with an error massage "video Mode not supported". What could be the problem and the solution. ?

  Hi Izzy Nagar,

  ·         Exactly when you receive this error message?

  ·         Did you do changes on the computer before the show?

  ·         Do you have any extended monitor connected to the computer in the past or at the present time?

  Follow the suggestions below for a possible solution:

  Method 1: You can try to reduce the resolution of the screen (lower), then check if the message still appears.

  Check also if the refresh rate of the monitor is set correctly and check the manual of the monitor for assistance.

  Ways to improve display quality

  http://Windows.Microsoft.com/en-us/Windows-Vista/ways-to-improve-display-quality

   

  Flicker of the correct monitor (refresh rate)

  http://Windows.Microsoft.com/en-us/Windows-Vista/correct-monitor-flicker-refresh-rate

  Method 2: Use the option ' enable video low resolution (640 × 480) "start, then update your video card driver and check if the problem still persists.

  a. click the Start button, click the arrow next to Shut Down and then click on restart.

  b. do one of the following:

  ·         If your computer has a single operating system installed, press and hold the F8 key as your computer restarts. You need to press F8 before the Windows logo appears. If the Windows logo appears, try again by waiting until the Windows logon prompt appears, and then stop and restart your computer.

  ·         If your computer has more than one operating system, use the arrow keys to select the operating system you want to start in safe mode, and then press F8.

  c. on the Advanced Boot Options screen, use the arrow keys to select activate video low resolution (640 × 480) and press ENTER.

  d. connect to your computer with an account of a user who has administrator rights.

  e. If you can see your desktop, there is a problem with your video card. Try to update your video card driver. For more information, see the article:

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

   

  I hope this helps.

• Reports on problems and Solutions window opens at startup even if a Check for Updates says that everything is up to date.

  How can I stop this window open whenever I start my computer?  When I check, all updates have been applied.

  Download updates for Windows

  There was a problem with Windows , which leads to stop working correctly.

  Your computer may run out of updates that can help improve its stability and security.

  Go online to search for and install the Important updates and recommended.

  1. Click here to access the Windows Update Web site online

  2. In the left pane, click check for updates. If updates are found, clickview available updates.

  3. Select all important updates and then click install. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

     Note
     If you have activated the automatic update, you can not see important updates listed. If this is the case, the updates have already been downloaded to your computer.

  Hi Barbara,

  1 when was the last time it was working fine?

  2. did you of recent changes on the computer?

  It is possible that some third-party programs installed on the computer is triggering problems and solution window to pop-up at every reboot.

  I suggest that you perform a clean boot and check.

  To help resolve the error and other messages, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See the link below to learn more about how to clean boot.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

  If the previous step fails, then check the event viewer for the cause of the issue and after return with details.

  What are the information contained in the logs of the event (Event Viewer)?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-information-appears-in-event-logs-Event-Viewer

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I bought two licenses adobe and I can't use them because they are expired, expiring 2017/03. I had this problem and solution still has the air of 15 days!

  I bought two licenses adobe and I can't use them because they are expired, expiring 2017/03. I had this problem and solution still has the air of 15 days!

  [Moved from the endorsement, general, all Adobe forums Lounge for a specific product - Mod support forum]

  Hi Eugenio,.

  It seems to be a problem of implementation.

  Try wearing the same query in the General Photoshop Discussion where experts can help you.

  Kind regards

  Sheena

• I replaced my hard drive and format my computer before turning off the software PS.  It need my code series now, but I had lost.  How can I solve the problem and use the software again?

  I replaced my hard drive and format my computer before turning off the software PS.  It need my code series now, but I had lost.

  How can I solve the problem and use the software again?

  If you use a perpetual Photoshop and formatted your disc version of starting without disabling your activation of Photoshop, you also Adobe supports help you activate Photoshop once you retrieve your serial number.  The startup disk formatting would destroy that credential of Activation Photoshop machine which is registered in the database of the Adobe activation server. Which reduces the activation numbers you have to use.  If you have Photoshop installed on a second computer that means that you have no free activation available as well, even with your key you can't activated the machine.

• You use Mac OSX 10.7.5, when you try to open a PDF file, I get a message "an internal error has occurred." I uninstalled and reinstalled both Adobe 10 and 11. Anyone know of the problem and the solution?

  You use Mac OSX 10.7.5, when you try to open a PDF file, I get a message "an internal error has occurred." I uninstalled and reinstalled both Adobe 10 and 11. Anyone know of the problem and the solution?

  Hi Charles,

  
  

  It is specific to a particular file or all the files that you are trying to open, gives you the error.

  How you open the same file using Preview on Mac.

  
  

  Thank you

  Vikrantt Singh
  

• Small color wheel keeps going in a lot of time and activity stops.  What is the problem and you have to?

  Chromatic wheel keeps going of and activity stops.  What is the problem and the solution?

  You meet the SBBOD (the spinning beachball of death).

  This means your MBP is trying to make his way through some task or tasks that he doesn't have sufficient resources to effectively or if you have a software problem that interferes with the efficient completion of the task (s). Common causes on this discussion:

  1. "antivirus" software from third-party manufacturers
  2. different types of cleaners 'misguided' and other dreck (for example, CleanMyMac, MacKeeper)
  3. trying to run too many processes for the hardware you have.
  4. Insufficient RAM for the processes that you try to run
  5. Hard drive that is too full
  6. CPU or hard drive that is too slow for the software you are trying to run.
  7. hard drive that is running out.

  Download and run Etrecheck http://www.etresoft.com/etrecheck and send the output to an answer here, and we can take a look and see what the problem is.

• Someone else has Apple Airplay jumping and drop outs when streaming music?  WiFi is not the problem, and there is nothing around the units of airtime to interference.  Impossible to listen to music.  Thanks for any advice.

  I've recently updated several broadcasts in my house from V1 to V2 in the hope of resolving a constant jumping and abandonment problem I always had when playing music with Airplay.  I have a unit of airtime plugged directly on my stereo receiver that feeds music throughout my house.  My WiFi connection is not the problem and there is nothing to cause interference.  Airplay modules are not more than 15 feet distance modem or range Extenders.  Someone else has this problem and, hopefully, a solution?   I'm tired of doing factory reset all the time.  Many thanks for any advice.

  I've recently updated several broadcasts in my house from V1 to V2 in the hope of resolving a constant jumping and abandonment problem I always had when playing music with Airplay.

  By "Airplays" what are you actually refers to... Base station airPort Express, Apple TV, or something else?

  ... and "V1 to V2" do you mean you replaced a 1st generation 802.11n AirPort Express with a 2nd generation?

  Airplay modules are not more than 15 feet distance modem or range Extenders.

  When steaming audio with AirPlay, the flow goes first to the device host to iTunes to the router Wi - Fi, this unit is connected to. From there, he will travel to the AirPlay "speaker". A president could be an AirPort Express, Apple TV or an AirPlay device ready another manufacturer. If you use line extensions, the flow must go through those as well... so there is potential bottlenecks between the host and the speaker. One of these could be the cause of the issue you found.

• Problems and Solutions alerted me that 64-bit Windows SQL Server NT stopped running unexspectedly

  Problems and Solutions has attracted my attention that my SQL Server NT 64-bit Windows has stopped running unexspectedly. He didn't have a solution as to how to resolve the situation. Anyone encounter this error and have found a solution?

  Hi Russellc407,

  The question you have posted is linked would be better suited to the TechNet community. Please visit the link below to find a community that will provide the best support.

  http://social.msdn.Microsoft.com/forums/en/category/SQLServer/

  Bindu R - Microsoft technical support.

• "lcwipx.exe of shortcut that you refer to is not available" and her does not open. He also asked delete me the shortcut. What is the problem and how to solve this?

  When connect my external hard drive and opening not wanting my my files, I get this message "shortened lcwipx.exe you make reference to is not available"and her does not open. He also asked delete me the shortcut. What is the problem and how to solve this?

  Hi Pascal,.

  I see that you get an error trying to access files on an external drive. I'll help you with this problem.

  1. What is the brand and model of the computer?

  2. What is the brand and model of the external drive?

  3. what security software is installed on the computer?

  4. have you made changes on the computer recently?

  5A external drive earlier good work?

  6. have you updated to Service Pack 2 installed?

  Method 1.

  Connect a different drive to the computer and check.

  Method 2.

  Plug this external drive on another computer and check the status.

  Method 3.

  Start the computer in safe mode and check.

  Start your computer in safe mode: http://windows.microsoft.com/en-SG/windows-vista/Start-your-computer-in-safe-mode

  Method 4.

  Run a full scan of the computer with the Microsoft Safety Scanner to make sure that the computer is virus-free.

  Microsoft safety scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx

  Warning of Security Scanner: there could be a loss of data while performing an analysis using the Microsoft safety scanner to eliminate viruses as appropriate.

  Let us know if you need assistance with any windows problem. We will be happy to help you.

• During the installation of the ultimate upgrade, get "one or several components of the system could not be configured", then it restarts and pours me to premium.___How can I say what is the cause of the problem and fix it?

  I have the same problem as Laweaver.
  I have a HP pavillion Model # m9040n running the 32-bit version with service pack 1.
  My Vista Ultimate Upgrade drive is 32 bit and also has Service Pack 1 on it.
  I ran my system through the Microsoft Update and it is common.
  I ran Vista Advisor and he tells me that everything is good to go.
  I also ran my system through the center of update of HP and he is current.
  I tried the Ultimate Upgrade three times and got the same message twice.
  Of course, it waits until it reaches "end of the upgrade" before it fails.
  I turned all the extra wide including the firewall when I tried the upgrades
  My computer came with the home edition Premium already installed on it and I have the disks of backup for him if I have to do a repair on it.
  I have the same question though - how to tell what the cause of the problem and fix?
  Thank you
  Rich

  Hi Eaglesoar1,

  This problem occurs because some features of Windows Vista cannot be migrated to the upgraded version of Windows Vista.

  To resolve this issue, follow these steps:

  1. click on Start, type programs and features in the search box, and then click programs and features in the list programs.
  2. under tasks, click on turn Windows features on or OFF.
  If you are prompted for an administrator password, type the password. If you are prompted to confirm, click continue.
  3. Click to clear the check boxes for the following features:
  o Microsoft .NET Framework 3.0\XPS Viewer
  O remote differential compression
  O DFS replication service window
  4 upgrade Windows Vista to a more advanced version and then click to select the check boxes that you clicked to clear in step 3.

  For more information see the Microsoft kb article below.
  Error message when you try to upgrade Windows Vista to a more advanced version of Windows Vista: "Windows cannot configure one or more system components to install Windows, restart the computer, and restart the installation.
  http://support.Microsoft.com/kb/946078

  I hope this helps!

  Halima S - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• My WiFi will only connect if I run the convenience store that corrects the problem, and then I'm ok

  My settings are set to auto connect, but lately it does not connect automatically. It is said to run the troubleshooter.  I start the game of shooting and it solves the problem and I am running. My problem is that I have to do this every time I open my laptop.

  Hi Mike,.

  Thanks for posting your query in the Microsoft Community Forums.

  After the description of the question, I understand that you have problems with wifi on the Windows 7 computer connections.

  I understand this must be frustrating, but don't worry, we're here to help and guide you in the right direction.

  I suggest you to update the network driver and check if it helps. See step 4 of section for help to update the drivers.

  Wireless and wired network problems

  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  It will be useful.

  Let us know if you encounter problems with Windows in the future. We will be happy to help you