Keyboard Satellite P100-190 number does not

Similar Questions

• Satellite P100 remote control does not work

  Hello

  Guys, I bought a toshiba satellite p100 and the remote with it does not work...

  no idea why? the battery must be fully charged... but when I press the buttons of the led on the remote control does not work or the other...

  Help, please...

  Thank you...

  Post edited by: qazam

  Hi Qazam

  How did you test the remote control?
  What do you mean who does not? Some functions does not work or a complete remote control cannot be used?

  I read the user manual and it seems that the remote will work under Windows mode with WinDVD or Express Media player, and Windows Media Player when the laptop was not started in the Windows operating system.

• Satellite P100 - 194 PSPA6E does not start and will not let me install Windows

  Hello

  I have a problem with my Satellite phone, witch, I got from my brother. I don't know what he did with it, but he does not know.

  When I start the PXE - E61 "Media test failure, check cable" appears. In the BIOS I put in the directory Boot LAN mode on the last position, but despite this failure E61 appears.

  I tried to reinstall Windows XP. The laptop started from the CD and the blue screen appeared and loaded XP drivers needed. But at the end of it, when you enter normally on the menu to choose where to install windows, the screen is black and in the upper left corner a small beam blinked on and outside and nothing happens plus.
  The same thing happens when I leave the laptop HARD drive and start again from the XP installation CD but this time without the HARD disc logically.
  So I thought that the HARD drive is broken and I put it in my desktop PC to test. I installed XP on the drive HARD Satellite in my PC, which worked without problems in my PC. So, I come to the conclusion that the HARD drive is not broken.
  And my BIOS Satellite detects my HARD drive and displays the name of it.

  But what is the problem with the laptop when it is not the HARD drive and BIOS show the good name of the HARD drive? Can someone help me please?

  Hello

  The story is very strange boyfriend generally that the PXE error if the laptop tries to boot from LAN. But in the case where starting LAN source in unavailable, the PXE error appears and shows this message.

  Usually, the BIOS passes LAN Boot option because the other options are not active. This means that the CD/DVD drive does not any bootable disk and the HARD disk is dead.

  So, as you can see you hypothesis was right that the HARD drive could be faulty

  In any case, try to access the BIOS and set it to the default settings save changes and then try to reinstall Windows XP.
  You might also try another HARD drive, I know as your fist HDD recognized correctly but it s worth a try to test the 2nd HARD drive.

• Satellite L300-190 - Wireless does not work in Ubuntu 8.10

  Hello

  I recently bought this Toshiba Satellite L300-190 (PSLB8E-014008N5) of the machine.
  First of all, I tried to install Ubuntu 7.x, but which failed due to a problem of graphics card. So I try the new version of Ubuntu 8.10, everything works fine, except wireless. There is no detection wireless in there.

  I tried through the Ubuntu forum, but still no luck. Please help me if you can provide me with a good driver or can guide me as well.
  I await your response.
  Ali

  Great news. Thanks for the link.

• Satellite P100-160 - system does not boot

  Hi all

  I was hoping someone may be able to help me with a problem I have with my Satellite P100-160.
  I was using it the other night without power connected when my battery ran out and he stopped.
  When I reconnected the power and it works I got the usual message asking if I wanted to start as normal I did.
  To do this i Gets the icon in the lower right corner telling me the system was trying to install a new mass storage device driver.

  He couldn't find it and I haven't added or removed something in my system.
  When I stopped and went to the re - start the next time, I received a message on the start screen in the sense of:
  error
  conflict of resources - controllers USB bus pci motherboard bus: 0a, device: function 04:01

  error
  resource conflict - controller mass storage of the pci on motherboard bus: 0a, device 04 function 02

  error
  resources - bus pci motherboard conflict: 0a, device: 04, function 03

  Press F1 to resume F2 to Setup

  I cannot go into the installer, but if I take the system just hangs and stop all the hard disk activity. I have managed to do successfully start once but no more, can't get into safe mode or anything. When I have it at my local computer store the guy he looked the error and said: it's broken, the motherboard has gone and there is nothing I can do with it. Im very disappointed that the laptop is only 2 years old and I would have thought that it would last longer than that.

  So my question s are the right guys, it's broken or is there something that can be done with it? If it is broken I can access the contents of my hard drive with another laptop (the guy from the store said something on to using a hard disk enclosure and use it as an external hard drive?)

  Thanks in advance for any advice

  D

  Hello

  It seems that the motherboard is affected
  In the message error - bus motherboard pci resource conflict: 0a, device: 04, function 03 the motherboard is mentioned, so everything looks like motherboard failure.
  But to be 100% sure you should ask the authorized Toshiba service provider of the opinion.

  Good luck

• Power of the Satellite P100-240 unit does not work properly

  From time to time my power (PA2521E - 2AC3) unit starts beeping and stops the power get to the computer, forcing it to drain the battery.
  Summer happening for several weeks now and sometimes it stops itself, but other times I have to put my diet off for hours and keep checking to see if the beep stopped.
  It does not overheat as I only for about 30 minutes before it starts to beep.
  If I turn off feeding the continuous ringing for a few seconds before disappearing for good.

  What is - this and I should send it back?

  Hello

  I never heard that the AC adapter would do some sounds or would start beeping
  In my opinion it of not normal and the adapter must be verified.

  You should definitely contact the ASP (authorized service provider) in your country to control and perhaps this part needs to be replaced

  I think the warranty is valid at the moment and the replacement is done for free

  Good luck

• Satellite P100-386 - screen does not work after replacing

  Hello

  my laptop fell and the screen was broken.
  So I bought a new screen from ebay.
  The new screen happened and when I changed it was on mode 'sleep' and that it worked fine, but when I restarted it, the screen didn't show anything and blacklit light worked...

  Anyone know why?
  Is this a bios problem?
  What should I do?

  My laptop is a p100-386
  My old screen was LP171WX2 A4K7
  My new one is LP171WP4 TLB5

  > The new screen arrived and when I changed it was on mode 'sleep' and that it has worked well.

  Does that mean exactly? Did you replaced the screen while the laptop was in Standby Mode?

  If only the internal screen would be affected so you should be able to see something (home Toshiba BIOS screen) on the external monitor
  Can you connect the external monitor (2nd) to the laptop in order to check this?

• Satellite P100 - recovery disk does not work

  After getting some annoying adware that I couldn't get rid of, I decided to format my hard drive and my notebook back to factory... something that I couldn't do.

  First of all, I inserted the disc, and in no way I couldn't take. I tried to run on the start menu, I browsed the records and sought some sort of file that would open up the normal Wizard... etc... nothing... I rebooted to see if it would start... nothing...

  I went into the setup (f2) and asked him to initialize the disk. He then says "Loading ram disk image" with a progress bar... the bar ends, the screen empties and that restarts, get to the same point and restarts continuously.

  I found this thread with a guy with exactly the same problem here:

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=17094

  He described his solution, but I have no idea what he's talking about.

  I got this 'product Recovery DVD-ROM' and no other discs. I can't get into windows, I can only get f2 and the parameters it and watch it to restart... I can't do anything with it at all.

  Stunned by using the made recovery disc my laptop unusable as before when it was just annoying ad sites in...

  Any help would be appreciated.

  Alissa

  Hello

  I checked the link in your ad, and the other person started the laptop with the Linux Boot CD to format and delete partitions on HARD drive integers.

  I recommend to do the same thing. Delete the partitions and format the drive HARD and then try to recover the laptop with the Toshiba Recovery CD supplied.

  Good bye

• Satellite L655 new battery does not charge

  Satellite L655 new battery does not charge

  Hello halik

  It is not easy to say what the problem is here.
  Purchased new and original Toshiba battery with the same part number (model number).

  New battery is recognized by the system?

• Assistance number does not

  Hi I'm trying to contact the support, but the phone number does not work for the Ireland: 1-800-275-2273, any advice?

  Contact Apple for support and service - Apple Support

  
  

  Ireland

  1800 804 062

• Satellite C650 - 1 CT does not recognize the CD/DVD

  Hello

  I currently have a problem with my model Toshiba C650 - 1 CT (PSC08E-03M001EN) satellite. The laptop does not recognize the CD/DVD and a check in the "Device Manager", said a damaged device driver!

  Now, my problem is that I searched on the internet and also on the websites of Toshiba for the right driver, but no use. The device (DVD) opctical no not also appears in the list of devices 'removable '.

  System details:

  Satellite C650-1 CT PSC08E-03M001EN
  OS: Windows 7 64-bit
  Place/country: United Kingdom

  Assistance in finding the right driver or advice how to solve the problem will be highly appreciated.

  Thank you
  Lamin

  Post edited by: jammehkunda

  As first step try please remove the optical disc drive from Device Manager and restart your laptop.
  After doing this review please the Device Manager and let us know if the problem persists.

• Cannot register Portege 205 - serial number does not exist

  I can't access path by recording my Portege 205 on Russian site as my second notebook.
  Serial number does not exist has been the answer.
  What can I do to fix this?

  Hello

  Has used the right serial number?
  Please recheck the number on the label that you will find at the bottom of the unit.
  Please don t mix letters and numbers. Sometimes people mix the 0 and o for example.

  But if you think you typed a number and recording not work so I would recommend contacting the Toshiba service will partner in Russia. Technicians can finish the registration process.

  PS: I hope that you bought from the computer store and not somewhere in the dark backyard ;)

• Satellite C - DVD tray does not open properly

  My Satellite C DVD tray does not open properly. It opens only after several times.

  Can someone help to solve the problem?

  Thank you very much
  Dalug22

  Please check this thread:
  https://Forum.Toshiba.EU/showthread.php?82344

  The ODD (optical disc) contains a small ejection hole. You can insert an object like a paper clip to open the ODD plateau

• my online number. does not. This is her busy when I call my online number

  my online number. does not. This is her busy when I call my number online, please help.

  bbdc07 wrote:

  my online number. does not. This is her busy when I call my number online, please help.

  Hello

  First of all, check that your privacy settings are set on "allow calls from anyone". ".
  Can change to "allow only people from my contact list SkypeIn calls.
  Save and wait for 5 minutes.
  Sign out of your Skype account and reconnect.
  Change the settings back to "allow calls from anyone".
  Save and wait for 5 minutes.
  Sign out of your Skype account and reconnect.

  TIME ZONE - US EAST. LOCATION - PHILADELPHIA, PA, USA.
  
  I recommend that you always run the latest version of Skype: Windows & Mac
  
  If my advice helped to solve your problem, please mark it as a solution to help others.
  Please note that I usually do not respond to unsolicited private Messages. Thank you.

• My Skype number does not appear as my purchased number at the front desk phones.

  When I shout, my purchased number does not appear in receiving lines.

  Can I receive calls on my purchased number and call out the purchased number but when I call the number purchased the Skype number being received is not mine. I can't find an answer to this problem or how to fix it?

  There is a very useful answer already posted:

  http://community.Skype.com/T5/Skype-number/want-to-set-up-your-online-number-as-caller-ID-go-here/m-...

  the short answer is that you must set your Skype phone number in the caller ID function: it's free.