Reports with the date of creation or modification of opportunity < = 3 months

Similar Questions

• 5 d Classic - problems with the Date of creation on the files

  I use Bridge CS5 v 4.1.0.54 and am having a problem with my 5 d classic, where some of my photos are dated correctly, and then some are dated as 11 hours later. They were all kick the same camera and same lens (no), a few seconds apart. Date information only appear to be incorrect in Bridge and are therefore sorted incorrectly, making it difficult for the workflow. However, I still have the pictures on my camera, so I took the CF card and examine its contents in Windows. In this case, all dates seem to match and be consistent. I posted in other forums, and most have suggested that there is probably a problem with Bridge, ACR, or Photoshop.

  I have provided links below for an example of images with different info Date created by bridge and then the correct information of the Date of creation in Windows when you view them on the map see

  I saw cela in at least two different scenarios recently. Haven't looked through all of my recent photos still to say whether or not it's got more than that.

  Any help would be appreciated.

  Thank you

  Jamie

  -Adobe http://www.jamiegphotography.com/portals/0/images/datecompare.jpg

  -Windows http://www.jamiegphotography.com/portals/0/images/PhotosWindows.jpg

  Have seen the problem before.  Two things to try.

  1. empty the cache in the folder with the bad weather (Tools/cache/purge cache folder xxxx).

  2. read this link http://forums.adobe.com/thread/854763.  The guy is from Austrialia and concluded that, after a certain time bridge labled it the next day.  Where are you from?

• You can use Windows Explorer (in Windows XP) to view my files according to their DATE OF PUBLICATION (rather than the date of creation or modification).

  I have a lot of cuts in MY Documents. They are variously in format (TXT, WORD, and PDF). Using Windows Explorer, I know exactly how to display these documents based on their date of creation or update. But how to display these documents based on their release date.

  (1) there must be a way to set "date of publication" as a property of TXT, Word, and PDF files.

  (2) there must be a way to display in chronological order the files in Windows Explorer - not according to their creation or modification date, but according to their date of publication.

  Can someone please? Maybe someone write an essay with many historical sources can feel my pain. I was playing with MS Word properties and trying to create custom, attributes but so far I still did not understand how to format a) correctly a new attribute for b) search for this custom in Windows Explorer or the Publication Date attribute.

  In short, I want to see all my files, because they have been published so that I can have a "timeline of events" outcome of saved newspaper clippings.
   
  Rabindra

  Name/rename the files with numbers on the front of the file name; for example, 01-11-2009 - historicaldocument1.doc, 02-13-1957 - historicaldocument2.doc. There is no way for Windows can read the text of a file whether it refers to the great Chicago Fire what on such and such a date.

  If you are doing historical research, you can check on some forums/newsgroup user on your particular area to see if other people use the documents management software. It would be the best way to go. MS - MVP - Elephant Boy computers - don't panic!

• error file name of report with the Chinese Date format

  Hello

  I see an error in the DUT report stage writing in the standard template files.  This step is calling the API method save on the Runstate.Report object.

  This problem occurs on computers using localization in Chinese with the date in the name of the report file.

  Is this a known issue?  Is it possible to change the name of the file before calling the method above to eliminate the problem?

  Mike,

  You have the ability to recognize characters multi-byte enabled? Please navigate to configure"Station and select the location tab. There should be a checkbox to recognize multibyte characters. This box is checked? Otherwise, try to check the box and re-run your movie file.

  Please let me know the results of this test. Thank you!

• Question about report with the format "Date."

  Hello friends! I want to make a line chart with a measure on the columns and type 'date' Format (MM/dd) data on lines and my report is invited with the type 'date '. In my dashboard page, I have a prompt with the Date and the operator is "BETWEEN".
  
  For example if I choose in my line of the first date: 01/01/2009 and the second date: 01/10/2009 in my chart, I see the results between these dates. But my question is... I see the same date last year? I mean if I choose the 01/01/2009 - 10/01/2009 I see this line and another line with 01/01/2008-01/10/2008. Is this possible?
  
  Because in my guest I can't type a variable presentation because date type is not taken care of...
  
  
  Thank you very much!!

  Let's say you have fresh measure
  then in your SPR you create logical column with the AGO formula (costs, TimeDim.YearLevel, 1)-Let's call him ' py 'measure.
  This will be your column YAGO...

  now in your report - you drop date, measure and measure columns py... it should work as long as you have the right size of set up time

• Interactive report with the subreport Details on the same page

  Hi all
  
  I am fairly new to APEX, sorry if my question is too obvious. I use Apex 4.0.2 on top of Oracle 11.2.
  
  I have an interactive report that lists the contents of a table. Since there are a lot of columns in this table I would like the report to only show that some identifier columns and all of the currently selected folder is displayed using another report in a separate area on the same page.
  
  The 'link' on the interactive report column is almost that, except that he jumps on another page; I would just like to have a subreport, updated with the data that is selected instead of a new page is displayed. Does anyone know how to do?
  
  Thanks for your help,
  Chris

  Chris,

  This looks like what I usually do in my referential data.

  I use the wizard to create the "report."

  I make sure that the two regions (the form and report) will be created on the same page number

  so I check/change the order of regions (second report in the first place, form)

  then I put in the form to display in the column 2

  Kind regards
  Richard

  P.S., the report shows only enough columns to recognize records. the screen displays all records

• Report with the query with union and parameters

  Hello
  
  We have an obligation to create a report with the request, which is the union and parameters.
  
  I intend to create a database for the report based on a query. But the problem here is that the way to pass parameters in the query.
  
  Request is something like that
  
  Select x.a, x.b, x.c
  x
  where x.year =: para1
  and x.status = 'A '.
  Union of all the
  Select x.a, x.b, x.c
  x
  where x.year =: para1 - 1
  and (x.status = 'c' and x.date =: para2 or x.status = 'I' and x.date < =: para2)
  
  Here x.year in the first select statement must be equal to: para1 and second select statement, it should be: para - 1.
  
  How this requirement can be achieved?
  
  Client don't want to separate worksheet, a parameter and another for the actual data that I tried with sys_context and it worked. But the client wants the result in a single sheet only... So I need to change their approach.
  
  Help, please.
  
  Thank you

  Hello
  Another option is to convert the request so that you will have the items from the selection
  for example on the query you provided that you can use:

  Select 'Curr' rec_type, x.a, x.b, x.c, x.year, x.date, x.status
  x
  where x.status = "A".
  Union of all the
  Select 'Prev' rec_type, x.a, x.b, x.c, x.year, x.date, x.status
  x
  where x.status in ('c', 'I')

  then, in the workbook, you will be able to create conditions such as:
  rec_type = 'Curr' and year =: para1

  rec_type = 'Prev' and year =: para1-1
  rec_type = 'Prev' and (status = 'c' and date =: para2 or status = 'I' and date)<=>

  Tamir

• See the time with the date in the cell?

  How do you not see time with the date in a cell? I tried all the settings I can find but without success.

  Using the numbers from version 3.6.2 (2577) - OS: El Cap 10.11.6

  I don't want to see that 12:00:00 AM

  

  Hi Russ,

  Inspector to format > cell, the parameters as shown below:

  

  Kind regards

  Barry

• Print an e-mail with the date of the transmission

  Hi, I need to print an email I wrote to send as proof, but when I do that it shows the date of printing, NOT the date it was originally mailed. Is there a way to fix this? I hope that you can help us as soon as POSSIBLE! Thank you, Annie.

  anniesol said

  Hi, I need to print an email I wrote to send as proof, but when I do that it shows the date of printing, NOT the date it was originally mailed. Is there a way to fix this? I hope that you can help us as soon as POSSIBLE! Thank you, Annie.

  Problem is now solved! Choose the print option 'other measures' dropdown list allows email to be printed with the date of the shipment.

• problem with the data record

  Hi, I'm new to LabView so I know that the thing I'm doing is relatively easy, however, I'm stuck.

  I made a small program that gets 5 steps (for now replaced with random numbers) and as well as the date and time data in the text file. I intend to run the program for long periods of time, so I want to increment the file name/path every hour, but after the addition of this part of the program does not create any file, although the program runs without error.

  Block diagram is attached, could someone point out to me what is wrong and what I should do to reach my goal?

  Thanks in advance!

  Hi marcis,.

  Acually, the logic of the program was completely wrong.

  1. your comments the file path will never help you. Because after leaving of while loop, the structure of matter will run once and LV will stops running.

  2. open and close the datalog only once file. Try to make all your manipulations between opening and closing your file datalog. Otherwise, it will be difficult to manage when you develop your code.

  3 case construction outside the loop is meaning less. If you want to run the program permanently, place all functions inside the while loop you want to run. While the loop will run continuously until you get satisfied.

  4. incorrect data streams. All programmers need well with the data stream.

  Just go into the basics of labview here and try to realize your logic again

• Measures with the date Conference

  Hello

  I have to make an application, as part of my end of study project, which allows to calculate heat flow. Pour this, I have data measured with thermocouples. These data are stored on a data recorder that record these data on a .txt, .xls or .csv file (it is to be chosen by user).

  I'm not very chiseled with LabVIEW.

  In a Prime Minister, I tried to read the .txt file data. I can read the 1st line as I wish but not others.

  So I decided to work with a .xls file. The temperatures Conference goes smoothly. For time is the date, it's more complicated. Indeed, I would like to USE date and time corresponding to each measure to plot a graph XY with the date and time X and Y the temperature of the thermocouple.

  Kind regards

  Here's an example (VI from LV2011 but attached VI en LV2010) made on the basis of your code. Comment by watch it extract the news date and time of the string and generate the the from graph XY time in seconds in X. realized very quickly, it is without doubt room for improvement but you will serve as a basis for work at least.

  

  To define 'Structure box' serving at first as far as being 0 and calculate relative time to the following samples. Thus the x-axis of the graph starts at 0.

  My time is short, I renounce other comments but I happy to answer specific questions.

• Problems with the date and time - have to reset the date & time on reboot

  original title: problems with the date and time

  Whenever I turn on my computer (Windows XP 2002) I click on F2.  Then I re - set the date and time it occurred in January 2006 1 h every time I have turn off the computer.  Can someone tell me what I need to do?

  You need to replace the battery in time clock (RTC) real of your computer.  It can also be called the CMOS or BIOS battery.

  Many computers, this battery is an inexpensive CR2032 button available in almost every pharmacy corner.  There are, however, some computers (especially laptops) that require a different (and probably more expensive) battery.

  Whatever the expense, almost all of these batteries are easy to replace.

  To get help, post back with the brand and model of your computer.

• Problems with the data connection

  Hello
  I bought a Z3 Compact Xperia on December 10, 2014. I live in Italy and I use Vodafone as my everyday.
  I got a SIM card replacement nano with LtE capabilities just to get the phone in the new fast network. The problem I encounter is that, since on January 13, 2015, I had some problems with the data in mode 3 G connection.
  So far, I used my phone normally, then I tried to send a text message with WhatsApp and phone stuck with the clock icon in the lower corner of the bubble of the message. I thought it was a temporary network problem but I'm not sure about this.
  I live in a small town where the coverage is really good, either in 3G and LTE. I tend to use the 3G because it uses less battery and it does not affect my 4G data plan.
  Th issue, it's that if I do a speedtest when I feel that network glitch I have a ping, but with very good download speeds up to 2000ms.
  The problem is that I believe that this is not a network problem because my mother has a phone HtC One S and runs vodafone without problem even when I'm having the glitch.
  I tried to reset the phone to factory settings, but it did not help.
  In LTE / 4G I do not experience this issue. In fact, I think if there is problem need a phone related software because the antenna works very well.
  If it doesn't I'll try to contact ad Vodsfone then I'll send my phone for the helpdesk if Vodafone tell me that the question is not on their network.

  Thanks in advance for your help.
  Simone

  It's pretty strange, double check the APN settings and contact EE in this regard.

• New reports with the Version 15.1

  With version 15.1, we have several new reports, including status report list grouping all individual status reports into a single report with the colors for the selected values of the keys.  It is an impressive report (as well as other added to 15.1).  Take the time to view the reports again.

  Where does he find one this version 15.1 report? I only find a project status report in global reports-> list of reports and there is no color as your example shows.

  

  

• DM 4.0.0.833 and synchronization with the data-&gt; TABLES DROP dictionary

  Hello

  I have a DataModeler physics implemented in Oracle database, I drop a table of data in DM maker 4.0.0.833.

  The database with the data dictionary synchronization and does not detect that you have deleted a table.

  
  Is this a bug? Or am I something wrong?

  
  

  Thank you
  

  Please mark the thread as answered if answer has helped you to solve the problem.

  Thank you