Republished online play then freezes - SOLVED!

Similar Questions

• I reinstalled the air combat Simulator 3 but he can't play. He gets at the beginning and then freezes. I've got shield deluxe antivirus 2009. He has not done this with the 2008 deluxe version of shield. Yet, I can play any other game.

  I reinstalled the air combat Simulator 3 but he can't play. He gets at the beginning and then freezes. I've got shield deluxe antivirus 2009. He has not done this with the 2008 deluxe version of shield. Yet, I can play any other game.

  Hi gullo56,

  Welcome to Microsoft Answers Community Forums.

  To help you better I would ask,

  a. If it functioned very well under Windows 7 before?

  ·         I suggest you to disable your firewall security software and check if you are able to play the game.

  From the link below, what I discovered is Microsoft Flight Simulator 3 is not completely compatible with Windows 7, but I would suggest that you follow the steps below to help troubleshoot your problem.

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/search.aspx?type=software&s=combat%20flight%20simulator%203

  1. as Microsoft Combat Flight Simulator 3 is supported by Microsoft Windows Vista to function normally, I suggest you run this program in Vista compatibility mode in Microsoft Windows 7.

  For information about how to run a program in an earlier version of Windows, visit the link below,

  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  2. you can also try to reduce the hardware acceleration and check if it solves your problem,

  1. Click Start-> Control Panel-> appearance and personalization.

  2. under customization, click on adjust the screen resolution.

  3. in the display settings dialog box, click the Advanced Settings button.

  4. in the monitor Properties dialog box, click the Troubleshooting tab.

  5. click on the change settings button.

  6. in the Security dialog box, click on continue.

  7 move the hardware acceleration slider to none to reduce or turn off video hardware acceleration.

  8. click on OK.

  9. restart Windows.

  Hope this information helped you.

  Kind regards

  Arona - Microsoft technical support engineer

  --------------------------------------------------------------------------------------

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Help the sims2 double deluxe loading and then freeze it!

  Recently I bought sims3 that plays very well, so I decided to get the sims2 double deluxe it will load but then freezes and the screen black, then tell does not.  I have Windows vista and the back of the box, it is said that it is running in windows vista.  Help, please.  I read one of the solutions was to delete your temporary files.  I'm not a computer person, so I'm afraid to remove or change anything.  I've updated drivers, changed to admin user and it compatible to windows xp pack 2.  HELP!!!!!!!!!!!!!!!!!!!!!!!!!!!

  Hello

  Welcome to Windows Vista community responses.

  What are the minimum requirements required by the game.

  Windows Vista, XP, Me, 2000, or 98

  1.0 GHz or faster processor

  256 MB or more RAM (512 MB required for Windows Vista or running with several expansion packs installed)

  At least 5.5 GB of free space on the hard disk

  DirectX 9 compatible .0c map video with 32 MB or more memory (64 MB for Windows Vista) and one able to t & following chipsets: ATI Radeon 8500 or greater (9600 or greater required for Vista); NVIDIA GeForce 2GTS or more (GeForce 6200 or greater required for Vista)

  Card compatible DirectX 9 .0c.

  Make sure you have the graphics card that meets the above requirement.

  Uninstall and reinstall the updated drivers for your graphics card from the computer manufacturer's website or graphics card manufacturer's Web site.

  Uninstall the game and reinstall it back and check if you still face the same problem.

  Put your computer in a clean boot the game game and check if you are still having the same problem.

  To perform a clean boot on a computer that is running Windows Vista, follow these steps.

  1. click on start, type msconfig in the search box and press ENTER.

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  2. in the general tab, click Selective startup.

  3. under Selective startup, clear the check box load startup items.

  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

  5. click on OK.

  6. When you are prompted, click on restart.

  7. after starting the computer, reinstall and run the program and see if the problem is resolved.

  Search for previous issues. If your issue is resolved, follow the how to determine what is causing the problem section in KB article to narrow down the exact source.

  http://support.microsoft.com/kb/331796 .

  To restore your computer to a Normal startup mode, follow these steps.

  1. click on start in the box start the search.

  2. type msconfig and press ENTER.

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  3. click on the general tab.

  4. click on Normal Startup - load all device drivers and services and then click OK.

  5. When you are prompted, click on restart to restart the computer

  I suggest also that contact the publishers of games for patches and updates on the game.

  Please let us know if you need additional assistance.

  Kind regards
  Anthony
  Microsoft technical support
  Visit our Microsoft answers feedback Forum and let us know what you think.

• FX6831-03 will not be able to start Windows. Just shows the gateway splash screen, then freezes

  My Gateway FX6831-03 will not be able to start Windows.  Just shows the gateway splash screen, then freezes.  OS is updated to current MS Win7-64 bit-w/all and virus/malware protection., Went over 4 days vacation, and when I tried to turn it on, it should display the gateway splash screen, then stop. can't hear anything that happens on the inside.

  Problem solved!  An external hard drive, powered by a separate power supply, was not turned on, but it was plugged into a USB port. When the computer "seen" this cross-town 'dead', he just stop - but no message appears problem.

  The good part?  Vaced out all the dust and replace the bios battery.  [I'm good for at least another 2 years;-]

• erratic cursor and then freeze it

  How can I get my cursor to STOP jumping around on the screen and then freeze it?

  It is on a desktop or laptop?... What kind of mouse is used?

  Can you confirm if the problem is occurring in a particular program?

  If you use a mouse running on battery, then please replace the batteries to see if that solves the problem.

  Also check the underside of the batttery for signs of debris (lint/dust) which could interfere with the infrared light... (kick across the box to remove dust)

  If you are using a laptop, that this problem can occur by accidentally touching the 'touchpad' area while typing?

  If you use a laptop go to the Control Panel on theStart menu and select mouse ... make changes to the sensitivity etc to see if that helps... you can use the icon for the "touchpad" found in the notification area to the bottom of the clock (lower right corner of the screen) often software called Synaptics is used... double-click on the icon to access the options and settings where some adjustments might help.

  It is possible that the video drivers must be updated and some kind of malware is the cause then be sure to check your pc with your AV program possible.

• Satellite P20-761: Windows will not start - it loads agp.sys then freezes

  When I pass my laptop it starts with the Toshiba logo as if commissioning, but then the screen goes black with the following message:

  We apologize for the inconvenience, but windows did not start successfully. A recent hardware of software change might have caused this... etc etc.

  Then I have a list of options to choose from:

  Safe mode
  Safe mode with networking
  Safe mode with command prompt
  Last good known Configuration
  Start windows normally

  If I have the choice between the options of safe mode the screen goes through a list of files ending with: multi (0) disk (0) partition (1) \WINDOWS\System32\DRIVE.sys, then freezes.

  If I have the choice between the last two options simply, the screen goes black and nothing happens.

  Of I'm desperate is not to lose all the data that I have accumulated on the laptop. Stupid me not a not bother with backups.

  Discs only can I find supplied with the laptop are 'tools and utilities' and 'product recovery dvd - rom '. Seeing that I am not a technical interest, I'm afraid to try just in case I lose all my most important files.

  Help, please! Answers must be plain English as like I said I'm not really technical. Thank you. I cross my fingers.

  Sounds like something wrong with the graphics card or with the graphics driver.

  I think that you have no other choice than to use the Toshiba Recovery CD and attempt to reinstall the OS. I hope that the graphics card doesn t malfunctions.

  It's very sad, because in this case, you will lose the data on the HARD drive.
  Optionally, you can remove the HARD drive and then to connect to little via the USB port on the other computer, then you can make a backup of your data.

• Why windows live mail open then freeze!, must do alt ctrl delete to close

  Why windows live mail open and then freeze!, must do alt ctrl delete to close, done uninstall and reinstall anything will do, downloaded pc cleaner mircosoft

  suggestion, same answer.

  What could happen there? also tried opening without antivirus protection to see if it was to degree of protection it has not helped.

  Hello

  The question you have posted is better suited in the Windows Live community forums. Please visit the link below for any further assistance.
  http://windowslivehelp.com/product.aspx?ProductID=15

• MSN will not turn on it just says: upgrading, but the upgrade entirely custom install it... GETS about 58% then freezes

  MSN will not turn on it just says: upgrading, but the upgrade entirely custom install it... GETS about 58% then freezes

  Quote your full version of Windows (for example, WinXP SP3;) Vista 64 - bit SP2; Win7 RC. Win7) when you post in a forum or a newsgroup. Please do it in your next reply.

  Your problem has nothing to do with the Windows Update feature. Contact MSN Support. ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• HP C4680 will not remove jobs at the end then freezes in queue on MAC with the Mavericks

  HP C4680 will not remove jobs at the end then freezes in queue on MAC with the Mavericks

  try to download the latest driver Package HP from Apple here:

  http://support.Apple.com/kb/DL907

  Install the package.

  Reset the printing system.  And add the printer with the new driver.

  Try to perform a "reset printing system" on the Macintosh and then reconnect to the printer.

  To reset the printing system do the following:

  1. open System Preferences
  2. click on Printers & Scanners
  3. right click or control click in the list box for the current print queues.
  4. Select the Reset printing system...
  5. enter admin user name and password
  6. restart the Macintosh
  7 try to set up the printer again

• Hello everyone, I want to be able to create forms to fill out that can be signed online and then sent to another Department, what product would you recommend?

  Hello everyone, I want to be able to create forms to fill out that can be signed online and then sent to another Department, what product would you recommend?

  Hi Don,.

  Please see:

  Plans and prices: compare the versions. Adobe Acrobat DC

  FREQUENTLY ASKED QUESTIONS | Adobe Acrobat DC

  To subscribe: https://acrobat.adobe.com/us/en/pricing/pricing.html?promoid=KSMON

  I hope this helps.

  Concerning

  Megha Rawat

• Can I do a Pre - slideshow homepage who plays then, by default, navigates to an anchor?

  Can I do a Pre - slideshow homepage who plays then, by default, navigates to an anchor?

  A better way to ask the question is probably-

  can I navigate to DEFAULT anchor point after the end of a slideshow?

  Tthat is not possible at this time. Your best bet at the moment would be to use the ToolTip widget and when a user places the mouse over the slideshow button can appear for them to click here to continue.

• Œuvres from VMWare for 20 seconds and then freezes for 5 seconds

  What is the problem with my VMware lately? It freezes up, then runs again for 20 seconds works for 20 seconds then 5 seconds, then freezes again for 5 seconds and? It's really annoying.

  
  Help!

  No, it's typical for the VMS version 6 of virtual and higher material.  Freezes most is either peripheral applications of diskette/CD-ROM or disk writes logging/debugging.

• When I download pureplay poker. Then go to play gets throughout the connection then freezes says not responding do not

  I found a great poker site play a lot on the site, but it downloaded version freezes when I try to play keep getting does not

  Hello
   
   
  1. when the game freezes? Is it immediately when you start playing or are - this random?
   
  It is possible that a third-party application may conflict with this game. Try to play the game in the State of clean boot and check if it works.
  See the article below for instructions on how to start your computer in a clean boot state.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: When the diagnosis is complete do not forget to reset the computer to a normal startup. Follow step 7 in the above article.
   
   
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Windows m player dia will not play a cd. It starts and then stops and then freezes

  It will play all the music library but not from a cd in my dvd/cd drive. It plays for about 20-30 seconds and then stops, if you click on the screen it faints and freezes.

  Hello

  Could you please answer my questions in the previous post dated September 2?

   

  Also try the following article:

  Important: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article:

  Back up the registry:

  http://Windows.Microsoft.com/en-my/Windows7/back-up-the-registry

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/314060

   

  Note: See in particular article regardless of the error message.

• Terrible freezes during online play. Not only ping or delay.

  OK, so I was playing a MMORPG called Lineage 2 on my PC, when all of a sudden I got a blue screen of death. After the restarted PC I tried to type my password to user on startup and I immediately had a blue screen again. I was really worried and thought that I should try the system restore, since I have no idea what I would do if I encounter a blue screen. But he failed and there was a mistake, 0x80071a91. I scanned the PC, defragmented, ran CCleaner and searched a lot of answers via Google but so far without success.
  Ever since I got these 2 blue screens that everything is terribly late, including mainly games. I only managed to reduce delays when using internet browser or when all but any game.

  Once, I try to run any game all starts to freeze for a few seconds, every few seconds, including the game itself, the browser and everything. I'm stuck using a PC that is used to be able to run anything smoothly, including games like Crysis.I know that it has nothing to do with my internet from the same connection "freezes" occur when I try games offline as well.

  You have ANY ideas what could be the cause of the problem and how do I fix and prevent it from happening again? I have already decided to leave my PC switched off for about a day, but I don't think it will be as simple as that.

  Windows 7 Ultimate 32 bit
  Intel (R) Core (TM) i5 CPU 2.67 GHz
  2 GB RAM DirectX 11
  NVidia GeForce 9600 GT

  Thanks in advance.

  Hi Incredibad,

  • Provide us the error message or error code. Follow these steps:

  a. click on start

  b. right-click on computer

  c. click Properties

  d. in the System Properties window

  e. click Advanced system settings

  f. click on the Advanced tab

  g. uncheck: automatically restart

  h. when the problem occurs, you will receive message or error post back with the same error code.

  To refine, we can try to start the inclean start your computer and check if the problem still persists. Link below will help you to start the computer in clean boot:http://support.microsoft.com/kb/929135

  If the problem does not persist, you can continue with step 2 from the link above.

  Make sure that you reset the computer in normal mode in step 7.

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.