Windows gadgets Google Desktop 7 has stopped working

Similar Questions

• Error on blackBerry Smartphones: Blackberry Desktop Manager has stopped working

  I use Desktop Manager 4.7.0.32 with a Blackberry Bold (9000); I sync with Outlook 2007 and I am running Windows Vista 64-bit Ultimate w / SP1. Synchronization worked well for many years with previous blackberries, but the synchronization problem appeared after a year or two of use with my previous camera curve.  I replaced the curve with the bold thinking which damaged equipment could be the problem (one too many drops).

  However, the problem persists.  While it seems I can synchronize with success a way (from PC to BB), Director of office falls down to halfway through synchronization of calendar entries in a synchronization two-way, unless there has been no new entry calendar on the BB. The error is an error generated windows inidcating: Blackberry Desktop Manager has stopped working.

  I tried every solution I could find on the web, namely:

  • Uninstalling and reinstalling Desktop Manager, making sure that I run the installer as administrator.
  • My Blackberry wiping and reinstalling the operating system (I use 4.6.0.162)
  • Delete the Intellisync folder
  • Run scanpst on my Outlookpst file
  • Clear the entries of calendar on the Blackberry (temporary solution only)

  The latter is the only approach that has produced no results.  If I delete the entries on the Blackberry, the

  process synchronization adds them correctly, and the next time I run the synchronization, it works without a hitch.  As soon as I did all the entries on the BB unit however, Desktop Manager crashes again, and the only way I can make it work is to clear the entries on the Blackberry and start over.

  I'm several months and both handsets of BB has invested in this issue now.  I have a new fancy camera, but am recorded in writing of the appointments on paper when I am out of the office because I know they used to synchronize if I enter them at BB.  Type of defeated half the point of a blackberry...?

  Getting desperate here.  Help is appreciated.

  Brad

  Hello Brad!

  I had the same annoying problem that you guys have described here.
  After trough fishing a lot of post and forums I found a very surprising solution for another type of BB and a different version of the DM on XP and not Vista. Being desperate I tried and miraculously it worked!

  Start the DM BB and go - Syncronize - set - synchronisation - synchronization (button) - calendar - Advanced (button) - mapping fields (field mapping button) and I got rid of the synchronization between the flag "alarm" and the "free occupied" and the fields "invited".

  I did it and now everything works perfectly.

  I have a BB Bold, Vista Ultimate (32 bit), MSOffice 2007 (PRO) and a DMv4.7.

  I hope it will work for you also.

  Kind regards
  Steve

• "Remote Desktop connection has stopped working" problem on Windows 7.

  When I try to connect to one of my Windows 2003 servers from my Windows 7 Ultimate pc, I get an error:
  "Remote Desktop connection has stopped working". It has something to do with the NLAapi.dll. If I rename this dll, TS works very well. I used the dll from another computer running Windows 7 RC and it works too, but in one of these two cases, while it corrects the TS connection, it causes other errors, maily with the network and sharing Center. Long story short, I think that there is a bug with nlaapi.dll. I can connect properly to my boxes of Windows XP SP3 servers. I ran all the updates on my 2 k 3 box, but still does not work.

  Here is the log of the event viewer:

  Name of the failing application: mstsc.exe, version: 6.1.7600.16385, time stamp: 0x4a5bce80
  Name of the failed module: NLAapi.dll, version: 6.1.7600.16385, time stamp: 0x4a5bdfc9
  Exception code: 0xc0000005
  Offset: 0x000000000000c138
  ID of the process failed: 0xf90
  Start time of application vulnerabilities: 0x01ca55cc39bf05f0
  The failing application path: C:\Windows\system32\mstsc.exe
  Path of the failing module: C:\Windows\system32\NLAapi.dll
  Report ID: 7772b4f0-c1bf-11de-bfa2-001d60a28de8

  Hi dekopolis,
   
  Thanks for visiting the site of the community of Microsoft Windows 7. The question you have posted is related to the Server 2003 and would be better suited in the Community (Insert here). Please visit the link below to find a community that will provide the support you want.

  http://social.technet.Microsoft.com/forums/en-us/categories/ Shawn - Support Engineer - MCP, MCDST
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Why my blackberry 7.1 desktop software has stopped working?

  my blackberry 7.1 desktop software has stopped working... .everytime when I open the software, it shows an error: he has stopped working... I also did the clean boot but nothing happned... Help, please!

  Hello

  Thanks for asking! If I understand correctly, your blackberry desktop software does not work. I suggest you follow the troubleshooting steps to check if this may help.

  You receive an error message on the computer?

  Try to uninstall and reinstall the Blackberry Desktop software and check if this may help. Make sure you download the latest version when reinstalling. For more information, you can consult the site of the manufacturer. Also contact Blackberry support if that's not enough.

  http://us.BlackBerry.com/support/apps-and-software/downloads.html
  Check out the link:
  http://Windows.Microsoft.com/en-us/Windows-Vista/uninstall-or-change-a-program

  Just reply with the results. I'd be happy to help you further.

• Remote Desktop Connection has stopped working since 7 for 2008

  Hello

  Dears I have strange problem and I have read everything discussed here, but it's not helping

  I have asus laptop with Windows 7 Home x 64 N53SM

  everything beautiful, and up-to-date

  Remote Desktop works well also

  one problem I can't use desktop remotely from my laptop to any server that is running windows server 2008 exactly... .other version 2003 work ok

  When I try to access to any server ruin win 2008 Server and put the server ip and password user name years and hit enter I see the error message

  Remote Desktop Connection has stopped working and computer laptop freez second then back with this message

  (Remote Desktop Connection has stopped working)
  A problem caused program stop working correctly
  Windows will close the program and notify you if a solution is available

  This is the complete log of the event viewer

  Results for: Microsoft product: Windows operating system; Version: 6.1.7600.16385; Event ID: 1000. Event source: Application error;

  ===========

  Name of the failing application: mstsc.exe, version: 6.1.7601.17514, time stamp: 0x4ce7ab44
  The failed module name: ntdll.dll, version: 6.1.7601.17725, time stamp: 0x4ec4aa8e
  Exception code: 0xc0000374
  Offset: 0x00000000000c40f2
  ID of the process failed: 0 x 1418
  Start time of application vulnerabilities: 0x01cd48bcf13be48a
  The failing application path: C:\Windows\system32\mstsc.exe
  The failed module path: C:\Windows\SYSTEM32\ntdll.dll
  Report ID: 39102a22-b4b0-11e1-a89a-005056c00008

  ===========

  Please help me to solve this problem without need format :)

  Hello

  As you try to desktop connection remotely from Windows 7 to Windows Server 2008, it would be preferable to send the same in the Technet community for more help.

  http://social.technet.Microsoft.com/forums/en-us/smallbusinessserver/threads

  Hope the information is useful.

• SOLVED blackBerry Smartphones: BlackBerry Desktop Manager has stopped working

  Hello.

  Let me start by saying: I have a footstool to laptop Dell Vista 64-bit with 4 gig ram.  I have Desktop Manager v 4.7 installed and work much to sync my Outlook calendar and my Blackberry.

  From a week ago, the synchronization process gets all the way to the end and I get a message saying:

  "BlackBerry Desktop Manager has stopped working" and I have the choice of "check online for a solution and close the program" or "close program".  When I click on "view problem details I get this:

  Signature of the problem:
  Problem event name: APPCRASH
  Application name: DesktopMgr.exe
  Application version: 4.7.0.37
  Application timestamp: 49c1b7ab
  Fault Module name: StackHash_6d57
  Fault Module Version: 6.0.6001.18000
  Timestamp of Module error: 4791 has 783
  Exception code: c0000374
  Exception offset: 000aada3
  The system version: 6.0.6001.2.1.0.768.3
  Locale ID: 1033
  Additional information 1: 6 d 57
  More information 2: a8064b034a1a2f2f618d075073f8fe42
  3 more information: 2dc5
  Additional information 4: dbcf31406c7084dbad1f33e2de526f4e

  Read our privacy statement:
    http://go.Microsoft.com/fwlink/?LinkId=50163&clcid=0x0409

  Any ideas?

  I found this on another site:

  (1.) start the Desktop Manager software

  2.) connect the blackberry using the USB connector
  3.) select "backup and restore".
  4.) select "Advanced".
  5.) look at the list of information to be displayed in the window "device memory" on your computer
  6.) select "calendar all" and delete it
  7.) go back to the main screen and synchronize them.
  8.), everything should work fine!

  Essentially, it's a data file of damaged calendar on the Blackberry device, apparently.

• Sync Smartphone blackBerry 8900 problem: "Blackberry Desktop Manager has stopped working".

  Curve 8900 on T-Mobile.  Fune Sync worked until a few days ago.  Recently used the Blackberry site to update all the software after that I received a message on my phone to do so (http://na.blackberry.com/eng/update/). Now, in the middle of synchronization (Bluetooth or USB), Windows tells me that "Blackberry Desktop Manager has stopped working".  It always stops working at the stage where Desktop Manager treats the device calendar.

  I tried all the stuff I can think: uninstalling and reinstalling, Outlook Update, disable Windows Defender, USB and Bluetooth, used the T-Mobile site and the EDGE of the site... nothing.  Help!

  Desktop Manager v5.0.0.11

  Handheld Software v4.6.1.231

  Windows Defender is DISABLED

  Synchronize with Outlook 2007

  Could mean that the calendar on the BlackBerry database is corrupted. Are the entries in Outlook until data on the BlackBerry? If so you can try out the BlackBerry database, and then synchronize again. To clear the database on the BlackBerry, go to the backup and restore | Advanced. On the right, you will see the BlackBerry databases. So you can choose the calendar, then click on the delete button. That will remove all entries from the BlackBerry calendar. Then try to sync.

• Transition of accessible technology among desktop computers has stopped working

  When I start my laptop I get "transition technologies accessible between desktop computers has stopped working" on my Vista...
  How can I fix it?

  Hello

  This error message is not known to me and it seems that there are not many details about this error.

  Have you checked if you can set the BONE to this early time before this error message appeared?

  Check it!

• Every 10 minutes, I get a popup window of Microsoft Windows error: Dell Support Center has stopped working

  Every 10 minutes, I get a popup window of Microsoft Windows error: Dell Support Center has stopped working. A problem caused the blocking of the program works correctly. Windows will close the program and notify you if a solution is available.

  I uninstalled Dell Support Center via the Control Panel, run the virus and malware scans installed a restore of a month before this problem point and continues.

  Hello

  Dell has their own Forums of Support for you to enquire about Dell software issues.

  http://en.community.Dell.com/support-forums/default.aspx

  See you soon.

• Smartphones from blackBerry Desktop Manager has stopped working

  "Desktop Manager has stopped working", that's what I get when trying to sync my curve.  He will get through the address book but stops each time on the calendar.  Any suggestions?

  Hmm. Maybe it's something in your Calendar database is corrupted. Your device has never been synchronized before? There is a way to clear the Calendar database. So if you have your device to sync with Outlook, after it is cleared from the BlackBerry, you can try to synchronize again.

  To clear the Calendar database, you can go to the Office Manager. Backup and restore | Advanced. On the right, select the Calendar database and click the clear button. Then try to synchronize again

• I opened PS3 and see a window "license for this product has stopped working". Help!

  I have the PS3.  A few months ago, I had an iMac 27 "10.11.2 opportunity and transferred my PS3 (plus any creative suite 3) top.  There was a window that says please register in 5 days or it will be inactive (or something like that). I did what I was supposed to do and have appreciated the help of PS3 on this new iMac.  Everything worked very well. Last night I shut down my computer before a separate software has been updated done and makes the iMac not able to start.  The only option I found was to erase the hard drive and install using Time Machine. (I use the bad terminalogy)   I did and everything was successful until I opened PS3 and see a window "license for this product has stopped working".  Help!  It is said one solution is to uninstall. When I went to the Adobe Uninstaller I saw NO PS3, but see icon with "Add or remove Adobe Creative Suite 3 Production Premium" with a small arrow, that I have the means to think his alias and I don't know where he lives. Can someone help me get back my PS3?  Thank you!

  Please stay on point and help me with my problem of PS3 and not encourage me to upgrade to what is current.  I have SP6 here, but want to keep the PS3 will.

  Thank you.

  Debbie

  Whenever you retrieve from a backup Time Machine, you will break licenses and need to run a repair. I know. I did it twice. As the instructions given in the doc to Adobe using own isn't enough for someone new to the procedure, I set up a screenshot guide.  Layout error 150:30 opening Photoshop cs4 on Macbook Pro

  If you go through this guide to screenshot and do exactly as indicated, you won't make those mistakes. Perhaps it would be good to read first. I carefully put in place this guide, my instructions are good in their current form, do not do anything else.

  In the first post #11, I forget to add a space after "sudo python" before you drag the licenserecovery.py to the command line, and I never load any type of break line or before you drag the script.

  Second: In #15 if you simply slide the script into the window, it will be on the same line.  What you see is the packing of command to work around the size of the window, but it is always on the same line and will run when you enter your password.

  You will also see that there is a space between "python" and the script in the screenshot.

  Again, if you are new to this, read first.

  Gene

• Satellite A500 - NVDIDA Windows driver in kernel mode has stopped working

  I bought a brand new Satellite A500-1GL with a Geforce GT 330 M graphics card. Unfortunately, whenever I watch videos in full screen I get the following error.
  "Display Driver NVIDIA Windows Kernel Mode Driver Version 188.29 has stopped working and has recovered"

  The screen turns white and the sound terribly false. I have already uninstalled and reinstalled the Nvidia drivers. It seems that all A500-1GL models with faulty chipset on the motherboard. Toshiba must investigate this matter!

  Help, please

  Hello

  The videos you watch exactly? This happens with all the videos, for example Youtube, DVD, or only with specific files?

  I also GT330M graphics card in my phone but I can t notice any problem with him. I m using the version preinstalled Windows from Toshiba and the last driver display Toshiba official page.
  And you should try updating the BIOS

  Finally and most importantly, another user reported that he could solve the problem if Windows Aero is disabled:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=51367

  Check this box!

• Windows host process (RunDLL32.exe) has stopped working

  Everytime I open my folder images IT WILL SHUT DOWN AFTER a FEW SECONDS or A minute SAYING THAT MY PROCESS HOST WINDOWS RundII32 has stopped working. And there are no long enough for me to know which file is bad other than these details.

  Application name: RunDLL32.exe

  Application version: 6.0.6000.16386

  Application timestamp: 4549b0e1

  Fault Module name: StackHash_b15c

  Fault Module Version: 0.0.0.0

  Fault Module Timestamp: 00000000

  Exception code: c0000005

  Exception offset: 00000000

  OS version: 6.0.6000.2.0.0.256.1

  Locale ID: 1033

  Additional information 1: b15c

  More information 2: c9e4594304342b09253c479543bc2fd3

  3 more information: da4d

  Additional information 4: ac61abc0799c254a2f5de7b99577dca9

  Hello Billsherenow,

  You can try this download (free) MalwareBytes from here: http://download.cnet.com/Malwarebytes-Anti-Malware/3000-8022_4-10804572.html? tag = mncol install, Update then do a scan of your system to ensure that it is indeed clean.

  Once the scan with the System File Checker, follow these steps:

  1. Click Startand type cmd in the box start the search .
  2. In the results, right-click on cmd.exearea, and then click run as administrator. You will be asked to type the password for an administrator account. If you are the administrator or type the administrator password, click continue . Then, click continue.
  3. At the command prompt, type Sfc/scannow, and then press ENTER.

     The analysis may take some time, so be patient. Windows allows to fix corrupt or missing files it finds. If the information of the installation CD is required to fix the problem, you may be asked to insert your Windows Vista CD.

  Hope this helps you. Let us know anyway. Make it a great day!

  "In the end the love you take is equal to The Love You Make" (The Beatles last song from their latest album, Abbey Road.)

• Windows Audio device Graph Isolation has stopped working and was closed.

  I am running Windows Vista Ultimate 32 bit. My volume on the system tray icon has an 'X' on it, and when I mouse over it it says "audio service does not work." When I right click on it, the open Volume mixer is grayed out and unclickable. When I get my audio settings / sounds an error pops up saying "Windows audio service is impossible. You want to allow it? "I click on Yes and then he said: 'Windows Audio Graph insulation has stopped working and was closed. »

  the error report is:

  Signature of the problem «»
  Problem event name: APPCRASH
  Application name: AUDIODG. EXE
  Application version: 6.0.6001.18000
  Application timestamp: 47919284
  Fault Module name: AUDIODG. EXE
  Fault Module Version: 6.0.6001.18000
  Timestamp of Module error: 47919284
  Exception code: c0000005
  Exception Offset: c 000070 0
  OS version: 6.0.6001.2.1.0.256.6
  Locale ID: 1033
  Information additional 1:3502
  More information 2: a465924573e02e7dbf28b31e7ea12c28
  Additional information 3: a4b
  Additional information 4: 91409072175cd5a219bdca7388005249

  Additional information about the problem
  Bucket ID: 932674242 "

  This is on a DELL XPS M1710
  I uninstalled the driver and reinstalled, uninstalled the device itself and not reinstalled, no change.

  No software installation seemed promt it.

  What are my options?

  deafinhum,
  If you run the utility from the Vista DVD System File Checker, it will extract the files it needs to turn off the DVD to replace those damaged.  If this does not work, you will need to do a repair of your Vista installation.

  Here is an article to help you with the repair process.  Please let us know if you need more assistance.

  http://support.Microsoft.com/kb/936212

  Thank you
  Gloria
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Google Voice Search has stopped working.

  Search Google text-to-speech has stopped working. When I click on the microphone on the search widget, it evokes a box that says force close. He also does that when I click on voice search in the applications Panel. I went and put the widget in the trash, thinking perhaps that it works if I and put it back on but I can't find it to put it back. So now I can't look at all. Someone please help. Thank you

  No there is no way to reinstall an application pre-loaded, but to do a factory reset.