Request for clarification - physical RDM and vMotion - in case of issue of the review

Similar Questions

• A security update for windows vista (KB2665364) cumulative hotfix for Kiibits (KB2647518) Activex and update Windows vista ((KB2679255) I get the error codes 800736B 3 and B 8007371)

  A security update for windows vista (KB2665364) cumulative hotfix for Kiibits (KB2647518) Activex and update Windows vista ((KB2679255) I get the error codes 800736B 3 and B 8007371)  I can't find answers and I'm not tech saavy.  Every day for a month updates failed to install

  Hello

  I would suggest trying the following methods and check if it helps.

  Method 1:

  In the following article from Microsoft Fixit to reset Windows Update components and check if the problem persists, run the fixit.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Warning: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: http://windows.microsoft.com/en-US/windows-vista/Back-up-the-registry

  Method 2:

  Put the computer in a clean boot state, and then try to install the updates and check if it works.

  How to troubleshoot a problem by performing a boot in Windows Vista or Windows 7:

  http://support.Microsoft.com/kb/929135

  Note: once you have completed troubleshooting, try the procedure described in step 7 to reset the computer to start as usual.

  Method 3:

  Try to download updates from the Microsoft Downloads Web site and check.

  http://www.Microsoft.com/download/en/default.aspx

  Hope the information is useful.

• How to take backup for VCSC, VCSE, MCU and TMS. I'm new in the world of video. A brief step by step would be appreciated

  How to take backup for VCSC, VCSE, MCU and TMS. I'm new in the world of video. A brief step by step would be appreciated.

  You can back up each server by following these steps:

  For VCS, see "Backup and recovery of data from VCS" section in the Cisco VCS Administrator Guide X8.5, page 340.

  For MCU, see "upgrade and save the MCU" section in the Cisco Telepresence MCU series online help 4.5, page 212.

  For MSDS, see back up and restore SQL Server databases you will back up the database of TMS 'tmsng' of the SQL Server itself.  It could either be hosted locally on the TMS server if you have installed TMS with the default settings, or an external user provided SQL server.

• Need for clarification about Webcenter and Jdeveloper Total confused.

  Hi guys,.
  
  IAM new product oracle and my self very fresh to the world of tools and oracle, when I did a little research on the package tools, I found Webcenter as an interesting tool and liked to hear. With the support of Mr YannicK Ongena I learn some concept and through some possible configuration but once all the setup I have query below, and mistook them... Now am not able to satisfy the Webcenter.
  
  I have a query, the developer should be installed the requirements.
  JDeveloper and database or something there.
  
  In the current configuration * I installed.
  WebLogic
  Database
  RCU
  JVM
  WebCenter Suite.
  
  As mentioned above this two configurations are different methods or should I install Jdeveloper with the current configuration?
  
  I'm confused a lot with the current configuration.
  
  If the Jdeveloper and adjustment of the current methods are to different then the one who will be recommended by the guide of environment pl in time real me on this.
  
  If possible help me with a better discription learn how Webcenter.
  
  Thank you and best regards,
  Naveen

  Best place to discuss these things on my blog :)

  First of all, you should look at the requirements. Depending on whether you need to decide what to use:
  (1) Portal of the WebCenter which is a completely customizable to environment in place your portal from scratch. This is done by using JDeveloper. If you want a WebCenter portal, you need not install the suite WebCenter full with the data base and the UCR and so on. You should only install WebLogic with Webcenter libraries. However, if you want to use services such as blog, wiki, documents, debates and so on, you will need to install the suite with an oracle DB and run the RCU to create repositories.

  (2) WebCenter spaces. This environment is installed when you install webcenter suite. This is the managed server WC_Spaces. It is a collaborative environment that requires no JDeveloper. You should only use JDeveloper to extend the spaces by adding your custom taskflows and portlets.

  If in short to the requirements:
  (1) WebCenter Portal:
  -JDeveloper
  -WebLogic + libraries WebCenter
  -Database at least the MDS repository (which can be created by the UCR)

  (2) the WebCenter spaces
  -WebLogic + WebCenter suite
  -Database at least the schema MDS and WebCenter (can be created by the regional coordination unit)

  If you want to learn how WebCenter, I recommend to learn early on. You don't need to go through the complete installation, process that can be difficult is you again for Oracle products.
  Just download JDeveloper studio edition: http://www.oracle.com/technetwork/developer-tools/jdev/downloads/jdev11115-405165.html and install extensions WebCenter. If you do this, you can't even install a database and so on.
  With this configuration, you can easily create your own portal without coding a lot. An ideal way to learn the basics of the webcenter.

  Hope this helps :)

• Request for clarification - plan of photographers CC

  So this includes CC Photoshop, but it includes actually to LR?

  (I couldn't find this term anywhere else).

  All Adobe notes say

  CC, Photoshop and "access to Lightroom 5.

  (the quotes are mine).

  Does that mean we get the subscription of the CC Photoshop, but only LR5?  not the future upgrades LR6/7 /...?

  Thanks - don't mean to be difficult, but in line with the 'Lightroom 5' references made me wonder!

• How to find out really currently used physical memory and swap space of hard disk to the virtual computer running?

  Suppose that I'm leaving WinXP hostOS a guestOS. Then a part of this guestOS remain in physical memory and another part is deployed on hard drive in the swap file resp swap partition.

  First question: the complete *.vmdk loaded into memory/swap space or only the part that is currently required?

  Perhaps only a *.vmdk 800 MB / 3GB is really responsible. But these 800 MB could be extended to 2 GB, because the content of these 800 MB is not compressed during load or guestOS drivers allocate additional memory.

  *. VMDK size seems so NO indicator for the actual amount of used memory / swap.

  How will I know how much physical (a) memory and (b) the hard disk swap space EXACTLY is currently occupied by a certain virtual machine running?

  Matt

  mattad wrote:

  First question: the complete *.vmdk loaded into memory/swap space or only the part that is currently required?

  The vmdk is not loaded into memory, because it is the drive of the virtual machine.

  *. VMDK size seems so NO indicator for the actual amount of used memory / swap.

  Yes, of course not. The memory used by the client is not related to the size of hard but the RAM assigned in the options of hardware reviews.

  How will I know how much physical (a) memory and (b) the hard disk swap space EXACTLY is currently occupied by a certain virtual machine running?

  Open the Task Manager and find a task vmware - vmx.exe or vmware-vmx - debug.exe.

  The swap file should be used if you have chosen to allow that VMware Workstation is authorized to Exchange. The file where swaps to door expansion .vmem Workstation. Search folder of comments.

  AWo

  VCP 3 & 4

  \[:o]===\[o:]

  = You want to have this ad as a ringtone on your mobile phone? =

  = Send 'Assignment' to 911 for only $999999,99! =

• I signed up for 30 day trial and I just got a notification if the trial ended. I did not use the system for more than 30 minutes.

  I signed up for a 30 day trial and I just got a notification if the trial ended. I did not use the system for more than 30 minutes.

  http://helpx.Adobe.com/x-productkb/global/trial-software-expired-early.html

• Request for clarification - APSB16-10

  Greetings;

  I'm an admin of patch for a fortune 1000 company and that you have to make sure I get this right.  In the Adobe security, 07/04/16 APSB16-10 Bulletin, it states that:

  Adobe security bulletin

  "Adobe is aware of reports that CVE-2016-1019 is actively exploited on systems running Windows 10 and earlier with the version of Flash Player 20.0.0.306 and previous versions."

  A little further down he adds: "Adobe recommends users of Adobe Flash Player with Extended Support Release should upgrade to version 18.0.0.343.

  We are on the Extended Support Release of Flash version and are currently patching up to version 18.0.0.343.  However, this version is earlier than 20.0.0.306 and I think I understand, it is still vulnerable to attacks of ransomware in accordance with the previous statement.

  Can I please a statement about whether or not the 18.0.0.343 version is vulnerable to such ransomware reported in CVE-2016-1019?

  Thanks in advance for your time.  All the tips are greatly appreciated.

  -Michael Babb

  Hello

  The Extended Support Release is updated only to security vulnerabilities, as such, version 18.0.0.343 is the latest version of ESR which contains fixes for vulnerabilities in this security Bulletin.

  --

  Maria

• Request for clarification on the new Solaris Cert review requirements.

  Regarding:
  

  Important changes to Java and Oracle Solaris Certifications
  Architect Java, Java developer, system administrator Solaris and Solaris Security Administrator path of certification requirements, starting August 1, 2011, will include a new requirement of compulsory attendance of courses.
  Candidates can obtain their certifications with the current requirements of the track available on the website of Oracle Certification through July 31, 2011...

  References:
  
  (1) http://education.oracle.com/pls/web_prod-plq-dad/db_pages.getpage?page_id=449
  
  (2) ASFS/OSSA 10 OCP Oracle Certified Professional, Oracle Solaris 10 System Administrator: http://education.oracle.com/pls/web_prod-plq-dad/db_pages.getpage?page_id=328
  
  (3) SCSEA/OSSESA 10 OCÉ Oracle Certified Expert, Oracle Solaris 10 security administrator: http://education.oracle.com/pls/web_prod-plq-dad/db_pages.getpage?page_id=330
  
  
  Reference (1) seems to indicate candidates wishing to obtain the OSSA and OSSESA would need to attend two classes, one for each.
  - Or is that what someone already ASFS/OSSA would not attend an additional for OSSESA class (as is the case for 10 DBA OCP/PAP 10 OCÉ).
  -If two classes are needed and a candidate has participated in the Solaris 10 OS part 2 System Administration which is a pre - req common for both exams, would be that monoclass is sufficient for two exams.
  ..........
  
  From my point of view and I suspect many others are in my situation, having a 10 existing ASFS.
  .... Does this mean that post July 31, 2001 it was desirable to acquire the 10 OSSESA a ECAS course so to must attend after that date?
  .... Looking forward to Solaris 11; This average current holder of OSSA/ASFS 10 existing will be should he follow a course for the upgrade to what I guess is Solaris 11 certifications at any given time.
  
  Thank you - bigdelboy
  
  Published by: bigdelboy on February 25, 2011 10:10

  Thanks for the questions. I could get more details on this.

  Reference (1) seems to indicate candidates wishing to obtain the OSSA and OSSESA would need to attend two classes, one for each.
  - Or is that what someone already ASFS/OSSA would not attend an additional for OSSESA class (as is the case for 10 DBA OCP/PAP 10 OCÉ).
  -If two classes are needed and a candidate has been involved in System Administration Solaris 10 OS part 2 which is a common pre - req for the two reviews, would be that monoclass is sufficient for two exams.

  If a candidate holds certification of sysadmin (Sun or Oracle brand), they can get safety Admin certification taking the exam, without additional training. So, 2 possible paths to safety certification Admin will be:
  -Oracle Certified Professional, system administrator Oracle Solaris 10 + Oracle Solaris 10 security administrator Certified Expert examination = Oracle Certified Expert, Oracle Solaris 10 security administrator
  -Training course + Oracle Solaris 10 security administrator Certified Expert examination = Oracle Certified Expert, Oracle Solaris 10 security administrator

  From my point of view and I suspect many others are in my situation, having a 10 existing ASFS.
  +.... Does that mean that post July 31, 2001, it was desirable to acquire the ECO 10 OSSESA one course then to must attend after that date? +
  +.... Looking forward to Solaris 11; This average current holder of OSSA/ASFS 10 existing will be should he follow a course for the upgrade to what I guess is Solaris 11 certifications at one point. +

  If a candidate holds certification of sysadmin (Sun or Oracle brand), they can get safety Admin certification taking the exam, without additional training. This means that if you got your certification Sys Amin before the obligation of running training, your certification will fill always the prerequisite.

  What about the next version of certification: in general, Oracle no training required for upgrades, so if you have the Solaris 10 version of certification (if you completed or not training), you will be allowed to upgrade to the new version with no training requirment. However, training is strongly recommended to help better prepare to review and also to better prepare for their role.

  Kind regards
  Brandye Barrington
  Certification Forum Moderator

• Request for clarification of use multipul

  I think I have this right but as a confirmation (don't want to break the rules).

  The scenario is as follows.

  I have a desktop machine at home and 2 laptops I use abroad. I am mistaken, I can install CC on all three computers and do the following. Make sure I sign CC on my home office and then sign on my two laptops to the two running while I'm away from home. Then disconnect the CC on at least one of the laptops to connect to CC again at home. What I actually disconnect on a laptop, or is the fact that laptop computers are turned off enough?

  If I have this correct can do this as often as I want? It is likely that I will want to do this several times each week.

  TIA

  John

  Yes, you can do it.  Do not disconnect on laptops.  You will get a warning asking you if you want to close remote laptops.

• I refused cookies for Scrabble on facebook, and now, neither he nor any of the other games I play work.

  I decided to cookies have been a bad thing and reject cookies on my FB game scrabble. Now, I can't use the game - allows you to reload the page and wants to connect to FB again, it gives me no time to do it before she begins to recharge again. I tried to delete the app for scrabble and then reloaded it, but that did not help. How do I allow only return cookies so I can play?

  Enable and disable the cookies that Web sites use to track your preferences

• In a wreath of two screens Thunderbolt, I could replace the first display with a (for example) 2012 iMac and use target Display Mode to power the two?

  My Thunderbolt screens have the possibility to be connected in Garland and get their signal on a single cable Thunderbolt, an iMac in target Display Mode should not also have this capability? Is an iMac in target Display Mode capable of simulating a Thunderbolt Display not only to get a video for himself but also for a Thunderbolt Display is connected?

  I've heard tell that some people used their iMac screen target with the target Display Mode while the iMac has been connected to another monitor (not a Thunderbolt Display).

  The result was that internal display of the iMac switched on the target Display Mode, but doesn't have the monitor connected.

  I haven't found someone who has tried this and published his experience with a Thunderbolt Display connected to the iMac.

  Unfortunately, a little more research would have responded and answered my question.

  Yes, I can replace one of the Thunderbolt screens in the chain with an iMac. Replaced screen should be one that is not directly connected to the mac of the source.

• Director for xp stops immediately and I can't find it on the Uninstall list and when I install xp service pack 2, it appears

  I'm working on a project and when I open WMM it stops immediately. I tried to uninstall, but it isn't on the list in my control panel (?) I tried to reinstall xp service pack 2 but no luck. Help!

  I don't know if this can help, but have you tried to install SP3?

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Windows XP Service Pack 3 network install package
  for developers and it professionals
  http://www.Microsoft.com/download/en/details.aspx?ID=24 the following links may be worth a visit:

  Movie Maker crashes and hangs
  http://www.Papajohn.org/MovieMaker-CrashesAndHangs.html

  Movie Maker still needs to close
  http://groups.Google.com/group/Microsoft.public.WindowsXP.MovieMaker/MSG/ae88267a9e023836

  And... the following Movie Maker Forum maybe worth a visit:

  Movie Maker forums
  http://www.windowsmoviemakers.NET/forums/

• When I log on my monitor only stays on for a few seconds and then goes black. need to turn the screen off and on several times before it lights.

  fact it for about a week now.  have ran antivirus scans and asked a lot of people who were not able to help me at the moment.

  It looks like a hardware problem.  Your monitor, cable or even the video card in your computer goes wrong.  My bet is on the screen.  Try to swap the monitor with another computer and see if the problem follows the monitor or the computer.

  HTH,
  JW

• How can I get the character appears on the screen for Windows, Internet Explorer and Outlook 2003 when I type on the keyboard and nothing not displayed?

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Hello Computerconfusedagain,

  Thank you for your message.  This happens with all applications or just these few?  If this happens with all applications, we will try to test with another keyboard.  In addition, you use a USB or PS/2 keyboard.  You could try the opposite of what it must also solve a bad port on your computer.  Please let us know the result so that we can help you further.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.