Request for delivery of the traffic/VPN

Similar Questions

• How can I make Apple sent an official request for Andorra in the list of international codes?

  Apple acknowledges that Andorra Telecom (Mobiland) is an approved operator.

  However it does not include the international dialing code of Andorra (+ 376) in the list of phone prefixes in the country.

  This prevents verification services, such as in two steps and two-factor authentication.

  How can I make Apple sent an official request for Andorra in the list of international codes?

  Thank you.

  Return of goods - Apple

• My safari has locked up with a request for verification of the property query.  What can be done to fix this?

  My safari has locked up with a request for verification of the property query.  What can be done to fix this?

  

  This is the shit that came.

  Force Quit Safari (cmd-option-esc) then restart Safari by holding down the SHIFT key.

  Sorry, wrong forum... question thought it was an OS X. In any case don't give them any info.

• IBM think centre @ request for initialization of the system user password and a genius set the bios to lock keyboard can it is bypassed and how?

  Original title: IBM think centre @ start request.

  IBM think centre @ request for initialization of the system user password and a genius set the bios to lock keyboard can it is bypassed and how?

  Hi brandon1980,

  I recommend you contact your computer manufacturer for assistance. The manufacturer would be able to give details about the BIOS (Basic Input Output System) and find out if this feature can be disabled.

  Hope the helps of information.

• How to make a request for Validation on the field of comments in BPM Worklist task details Page

  Hello
  I am newbie to SOA 11 g.
  
  I use SOA 11 g and Jdev 11.1.1.3 for development. I created a human with two results (APPROVE, REJECT) and task able to display the page the task details in the BPM list. I have the comments of default section that comes by 'Auto generation of ADF Taskflow' in the Task Details page. This comments section will display the comments of several users who have access to the task. I want to add validation for the field of comments as below-
  
  (1) to DISMISS the action, we must check whether or not the APPROVER had provided the reason for REJECTION in the comments field. If this isn't the case, we need to display a popup asking him to provide observations of REJECTION.
  (2) on the action to APPROVE, no need to check for comments, so no validation is necessary.
  
  Can someone give me some ideas how it is possible.
  
  Thank you
  Udaya Neeliahgari

  Hello
  Try the following...
  In the composite open y'r process bpel... and then to expand the human task... you will notice a task entitled just before the initiateTask run the following two copy operation in the task of AssignTaskAttributes within the scope of the human task.

  IMP Note: The variable is the variable initiateTaskInput of the human task field. Don't assign not on on the global variable

  1 assign a string value "REJECT" in the expression (assuming that you do so that the result of REJECTION) and assign it to the variable

  /TaskService:initiateTask / task: task / mission: systemAttributes / task: preActionUserSteps / task: preActionUserStep / task: results

  2 assign the string value "PROVIDE_COMMENTS" in the expression and assign it to the variable

  /TaskService:initiateTask / task: task / mission: systemAttributes / task: preActionUserSteps / task: preActionUserStep / task: userStep

  view the .bpel file source y'r and make sure that you see something like the following:

  
  
  
  Query = "" / taskservice:initiateTask / task: task / task: systemAttributes / task: preActionUserSteps / task: preActionUserStep / task: result "/ >"
  
  
  
  
  Query = "" / taskservice:initiateTask / task: task / task: systemAttributes / task: preActionUserSteps / task: preActionUserStep / task: userStep "/ >"
  

  Just deploy the app... and when you try to dismiss... it should appear the message.

  concerning
  Raja

• HP 110 mini book requested for password on the switch on

  Anyone can help with my problem. I am asked to enter a password when that I start my notebook 110 hp.

  Thank you pfindla

  Pfind try.

  e9lofqxkqd

  3rd letter tiny L.

  4th letter lowercase O.

  6th and 9th Q lowercase letter.

  Use this code to go into the BIOS.

  Disable all passwords that are enabled.

  If demand for CURRENT password using this code.

  Request NEW password just press ENTER.

  If asked to hit just to CHECK password to enter.

  Save and exit.

  REO

  I must inform you that these services are not endorsed by HP, and that HP is not responsible for any damages that may occur to your system using these services. Please be aware that you do so at your own risk.

• ISE server receives requests for authentication of the bridge VLAN, not the IP Address of the switch management

  Hello

  A 3850 catalyst switch has VLAN 20 (10.18.4.32/29) defined on it, which has a 10.18.4.38 gateway:

  D01-01-BWY #show ip short int vlan 20
  Interface IP-Address OK? Method State Protocol
  Vlan20 10.18.4.38 YES manual up up

  A server of ISE (SNS3415) is connected to a port configured on VLAN 20, with IP address of 10.18.4.33.

  01-BWY-D01 has to a management interface of 10.18.4.17.

  I created this switch as a device network in ISE and activated the RADIUS config and then configured the switch with the following commands:

  RADIUS attribute 6 sur-pour-login-auth server
  RADIUS attribute 6 support-multiple server
  Server RADIUS attribute 8 include-in-access-req
  RADIUS attribute 25-application access server include
  dead-criteria 5 tent 3 times RADIUS server
  RADIUS-server host 10.18.4.33 auth-port 1812 acct-port 1813 borders 7 1521030916792F077C236436125657
  RADIUS-server host 10.18.4.35 auth-port 1812 acct-port 1813 borders 7 02350C5E19550B02185E580D044653

  radius of the IP source-interface GigabitEthernet1/0/1

  The problem:

  When I test the functionality of RADIUS using the following command, it fails. HOWEVER, the customer (switch) IP listed in the error log in the front door of the VLAN 20 (!):

  test the aaa group RADIUS server 10.18.4.33 auth-port 1812 Capita123 user radius acct-port 1813! new-code

  10.18.4.38 is the gateway IP address of the VLAN that hosts the servers of the ISE, I don't understand why its listed in error as IP device logs!

  ource Timestamp 2016-06-22 16:38:02.826 Receipt of timestamp 2016-06-22 16:38:02.841 Policy Server GLS-ISE-01 Event 5413, accounting RADIUS-Request dropped Reason for failure 11007 could locate no device network or Client AAA Resolution Check if the device network or AAA client is configured in: Administration > network resources > network devices First cause Could not find the network device or the AAA Client while accessing NAS by IP during authentication. Type of service Box NAS IPv4 address 10.18.4.38

  Other attributes ConfigVersionId 118 Port of the device 1646 DestinationPort 1813 Protocol RADIUS ACCT-status-Type Update-intermediate ACCT-Delay-Time 15 ACCT-Session-Id 00000000 ACCT-Authentic RADIUS AcsSessionID GLS-ISE-01/255868885/32 IP address of the device 10.18.4.38

  If I reconfigure the switch to the ISE - peripheral network and give it the IP address of 10.18.4.38 (the ip of the gateway), my radius authentication tests suddenly becomes successful.

  can someone clarify the situation what is happening here?

  I need to be able to define multiple switches by their unique IP addresses.

  Thanks for your time

  m

  Hello

  The only time I saw that it was due to use a deprecated command: radius server host.  There was a bug on the IOS XR platform as well.

  Could you please reconfigure your order of RADIUS by using the new command: radius server? And test again?

  The doc of Cisco for the new order:

  http://www.Cisco.com/c/en/us/products/collateral/iOS-NX-OS-software/iDEN...

  Thank you

  PS: Please do not forget to rate and score as good response if this solves your problem

• Requests for comment move the cc on another partition?

  Hello everyone,

  I would have liked to move all of the cc to partition applications another.

  At installation, the program allows me at any time to indicate another partition or another disc, on which I would like to install the software.

  4 cc applications take me more than 3 GB on the partition dedicated to the operating system (SSD drive) and lacking space.

  Thanks in advance for any proposal and soon

  Germain Delsart

  Hi, Germain,.

  I think you want to change the installation location of the CC apps.

  Please launch the desktop creative cloud application > click the gear on the top icon right > select preferences > under the creative cloud section, you can specify the installation location.

  Reference: installation directory change request

  Kind regards

  Sheena

• Satellite A500 boot UEFI/legacy option - request for update of the BIOS-

  I am the proud owner of a Satellite A500 PSAR9A - 02S 001
  I was very happy with it over the years.

  However, when you try to dual boot, I use in all sorts of problems.

  I really need uefi/legacy startup options to be unlocked in the bios menu
  I think that this feature is present
  However there is no options to configure in bios, please release an update for this.

  Please, I beg you.

  It would help me a lot.
  Not too much talk of what all the other hidden settings in the bios u could also unlock.
  I'd appreciate any help in this

  Post edited by: Bigwheels

  As far as I know, Toshiba offers a few changes of BIOS options and is not also a part of the BIOS updates.

  What kind of problems you have with dual boot?
  What is preinstalled on your computer? Post please some info on exact OS install.

• Request for information about the OS

  When I visited today the HP service center, they told me that your computer (HP Pavilion dv4 5109tx) laptop can install win7 SP1 only. They told me that you can not install win XP. Why is it so? What happens if I want to install another operating system or with service pack 2 or 3 win7?

  It's ok, more questions just give more understanding that you must be this

  Why you can install windows 7 SP1 but not windows 7 SP1 - is due to the drivers included on the OS installation disc. I've seen this several times for several products and its supplier, without specific limitation.

  When win7 is released there are X hardwares so most common for those adding drivers to OS from MS (it's the prectice Microsoft makes all the time). After awhile it drivers X + there are also offered to users MS includes these drivers under Softpaq to OS disk.

  getting back to your question. Please do not try the same file but just check and confirm if you get this error reported in the linke below.

  http://support.HP.com/us-en/document/c03027843

  If Yes, you may use the similar resolution to install OS however the link of the driver will change based on the product.

  Here is the link for the softpaq driver you need to download and extract the drivers to install to.

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-105110-1&CC=in&DLC=en&LC=en&os=4063&Product=5268064&sw_lang=

  or

  http://ftp.HP.com/pub/SoftPaq/sp56501-57000/sp56553.exe

  Please try these and update. It will be useful.

• Request for use of the virtual computer RAM

  Hi all

  I have 3 x VM running to work in a box, each machine was given to 16 GB RAM allocated.
  My confusion is when a virtual machine starts and become inactive, the memory usage levels out and remains the same (as you know).  However when an application is launched, and the memory usage is used, it is never 'product' when the application closes.  So finally, during the day the memory used displays 99% and will never fall.  There are never problems with caution and no request may not work, but I found this strange behavior...
  Is this a normal behavior?  Can someone explain the logic behind this?
  Thanks :)

  Given that most of the individuals are not running Virtual Machines, I would say that your question belongs better in the IT Pro community:

  http://social.technet.Microsoft.com/forums/en-us/categories

• Request for authorization from the administration...

  When I use toad 8 then windows7 always ask permission of the administrator, is that we can disable this validation?

  Hi Prashant Sharma, k.

  Thanks for posting your query in Microsoft Community.

  I understand how it could be frustrating when things do not work as expected. Please, I beg you, don't worry I'll try my best to resolve the issue.

  Who is the seller of the program 8 Toad?

  The only way to disable this prompt for administrator authorization is to disable UAC

  Enable or disable the User Account Control
  http://Windows.Microsoft.com/en-in/Windows7/turn-user-account-control-on-or-off

  Note: User Account Control (UAC) can help you to prevent your computer from unauthorized changes. It works by asking permission when a task requires administrative rights, such as installing software or changing settings affecting other users. We do not recommend disable user account control. If you turn it off, you must reactivate as soon as possible.

  Hope this information is helpful and let us know if you need more assistance. We will be happy to help.

• Request for assistance with the importation of crude oil

  I get a program error message when you import a raw (.orf) file in Adobe Photoshop Elements 10.

  Also after the update of all the adobe programs.

  The raw file is generated by my camera Olympus E - M10 mark II

  Please give me a clue how to solve this problem.

  Piet

  Your camera is more recent than your software for many years.  To open the ORF of the EM10II you need ACR plugin 9.2 which host needs a PSE14 or newer.  You can buy 14 items here: http://www.adobe.com/products/catalog/software.html

  You can also use the free DNG Converter to convert a FOLDER of raw files to DNG and these DNG is open in the old software.  You can get the DNG Converter here: http://www.adobe.com/downloads/updates/

• Set limits for requests for execution in the Variable Designer

  
  Hello world

  In Variable Calc Manager Designer, there is a place to enter within the limits of the variables.  I have currently a fast run time set up and I wonder if it is possible to give the user the ability to view all of the hierarchy of a dimension when prompted, but accept only level 0 members.  Right now, if I limit it to upgrade only 0 members, it is confusing to the end user because it is an endless list of members with no order.  So I want to be able to continue to use the hierarchy to navigate to the Member at level 0, but only accept it and run the rule if it is a 0 level.  Thanks for your help!

  Maybe you could be a condition in the calculation to accept only level 0.

  So if the user selects a level no 0 member the business rule will not run finished.

  An example would be:

  IF (@ISLEV ('dimension', 0))

  do something

  on the other

  do nothing

  endif

  I think you can have message appear with a function so that you can inform the user that the input value was not level 0

  Concerning

  Jimmy

• A request for information on the 'Summary' cluster tab

  Someone has a powershell script to query the total number of virtual machines and templates in a cluster?

  I'm a heavy load of S-VMotion on a weekly basis, and I want to run a script that can pull the total number of virtual machines in each of the groups within a specific data center.  I need to keep track of speed to get this and again how much I have to do.

  At the moment it's a manual count of the process and I had to script this and then I can automate to send me an email a week.

  Thanks for any help you can provide...

  Hello

  in order to count models and virtual computers on each cluster in VC, you can use this:

  Although I'm not so sure if it's the best way how to do it... I myself am cofused several times while writing this, but...

  $clusters = (get - view - viewtype virtualmachine-filter @{"Config.Template" ="True"}) | %{$_. Summary.Runtime.Host | Get-VIObjectByVIView | get-cluster | fate - the property name} | Group-object - property name

  Get-view viewtype - clustercomputeresource | Select name, @{N = "MV"; E = {(get-vue-viewtype virtualmachine SearchRoot-$_.moref-filtre @{"Config.Template"="False"}).} County}}, @{N = 'Templates'; E = {$clname = $_.name;} ($clusters |?) {$_. Name - eq $clname}). County}}

  First to initialize the $clusters and then run the second command.

  $clusters will get the cluster name and the number of models registered in these groups

  Once it's done

  By running the second command you will iterate thourhg ALL clusters (because when $clusters is initialized only be gets clusters where it can find templates, so you can have some clusters that were not included because they were not all in there)

  While it is an iteration thourhg all clusters. He puts a column called VM, which is the number of all the vms(without templates) who reside within this cluster, then the extra column based on variable $clusters, where he seeks the same cluster and then name it gets the count property.

  In the end, you should see something like this:

  Name                                                                                                          VMs Templates
  ----                                                                                                          --- ---------
  cluster=1                                                                                                         3
  Cluster-2                                                                                                         4      2
  cluster-3                                                                                                         1       6

  Kind regards

  Greg