Research by ASA & ISP address space

Similar Questions

• Overlapping address space question - how to NAT inside the traffic to one address different range on SAA for comms with 3rd party VPN?

  We already have a connectivity of IPSEC VPN site to site with a 3rd party.

  They must be able to access a couple of servers on our internal network but the problem, it's the subnet these servers are hosted on clashes with the address space they already used elsewhere. Thus, they asked if we can put in place a new subnet and have our firewall (running v7.2) ASA NAT the traffic to and from our servers ' real' internal addresses.

  for example

  • 3rd party 10.10.10.0/24 subnet
  • Our subnet 10.20.20.0/24 (but this clashes with the 3rd part of the address elsewhwere space)
  • Our 'real' internal server addresses are 10.20.20.1 and 10.20.20.2

  How do we setup NAT on our ASA translating internal addresses 'real' of these servers for some other addresses that don't clash?

  that is that the 3rd party is concerned, they would simply have to communicate with this 'new' subnet, say, 192.168.20.0/24 and our ASA firewall NAT traffic accordingly to allow some comms unfold?

  (And it should affect only comms on these servers for the 3rd party - NOT for one of our other multiple VPN connections! "And should not affect the other comms from the servers themselves!).

  That's what I've tried so far, for one of the servers, without success:

  On ASA:

  !

  access-list 1 permit line 3rdpartysite extended ip host 192.168.20.1 10.10.10.0 255.255.255.0
  !
  access-list SERVER-NAT line 1 permit extended ip host 10.20.20.1 10.10.10.0 255.255.255.0
  !
  static (inside, outside) 192.168.20.1 public - access NAT SERVER list

  "sh xlate" indicates:

  192.168.20.1 global local 10.20.20.1

  Can someone help with the necessary NAT configurations on the ASA?

  Thank you!

  'Clear xlate' after you have configured NAT statements?

  When you try to ping from the 10.20.20.1, get it to the ASA? You have an ACL on this interface that would block the ping? Also, can you run capture packets on the ASA to see if the ASA receives even the traffic?

  What is the subnet mask of the 10.20.20.1 host? I guess it's 255.255.255.0?

  You don't need something specific on the ASA with regard to the delivery of the 192.168.20.1.

• Window of "research/fliter' for the address book stop working

  Window of "research/fliter' for the address book worked well until I tried today, v 31.6.0. (win 7) Just updated to 31.7.0 and still no search results. Typing in characters do not appear possible matches (name/email selected option). However, CTRL + SHIFT + F works very well in the address book search. How can I get the search/filter window to work as he did? Thank you.

  ajb328 said

  Window of "research/fliter' for the address book worked well until I tried today, v 31.6.0. (win 7) Just updated to 31.7.0 and still no search results. Typing in characters do not appear possible matches (name/email selected option). However, CTRL + SHIFT + F works very well in the address book search. How can I get the search/filter window to work as he did? Thank you.

• The search with BING when I type my research topic in the address bar. How can I change?

  The search with BING when I type my research topic in the address bar. I wish it were google again.
  How can I change?

  Hi sarou,.

  Take a look at this article on the keyword service. It will show you how to get back to Google.

  Hope this helps!

• MSR maps - research based on the address no longer appears.

  Original title: cards MSR

  Microsoft has stopped support MSR maps?  The research based on the address seems to no longer work.  I use this site frequently to retrieve USGS maps.

  Hi Mark,

  What exactly happens when you perform a search by address? You receive error messages?

  You can read the following article:

  On the Microsoft Research maps

• Update my windows xp to 64-bit increases the allowed for the ram address space?

  I have Windows XP 32-bit... If I have upgraded to Windows XP 64 bit will it allows me a greater address space for my ram?  I already know that the programs that I use currently will support 64 bit.  My motherboard will support it as well.  Like I'm looking for a solution to my problems on this model of game play.  It serves to support my game very well, but since the processor over heated (replaced fan) and replaced the graphics card, ram replaced... my gaming experience is still not was.

  It would if you could... but you probably can't.

  On the one hand, it is not only your programs or your motherboard.  You must change your CPU as well.  Is there any other hardware and device drivers.  And, of course, there is the small problem that Windows XP 64-bit is no longer available from Microsoft (you can find online, but it is not cheap and may or may not be 'authentic').

• My laptop can open internet explore properly, the cursor may work when you tap the address space to type a Web site, but the site it does not point to the search space to find anything except the right button

  My laptop can open internet explore properly, the cursor may work when you tap the address space to type a Web site, but the site it does not point to the search space to find anything except the right button. What is the problem? Harry

  When you try to search it's inside Windows or Internet explore?
  When is this last work fine?
  You did changes to the computer?
  Has it worked before, then you can try to run the system restore and check if that helps

  ;)

• VPN and overlapping address spaces

  I'm trying to setup a VPN to allow a business parter access our network. The problem is that the partners use the same private address space as we do.

  I'm trying to understand how the NAT address translation is internal to a different address as the packet out of the VPN tunnel.

  There is a Visio Doc attached that shows THEM and 'US'. The side "THEM" doesn't use real IPs, I made this drawing because I'm an example put in place in a lab environment, so I took random numbers for IP addresses 'THEM '.

  The PC (s) of the partner must have access to two PC on my side. I got it working until the VPN tunnel appears between the two PIX501s and translated the destination address IP in a private IP address, but need help to translate the remote source IPs in private IPs.

  Here are a few exits of the PIX on the 'US' (my side).

  ICMP echo request incoming (len 32 id 2 seq 44033) 10.150.100.100 > 216.x.x.x > 10.220.2.10

  The source of the packet is sent to the address 216.x.x.x and then translated to its internal address of the 10.220.2.10. I need to translate the 10.150.100.100 address to something else, so he isn't wasting my network. Ideas? I'm a n00b PIX. Thanks in advance.

  Hello

  Sorry I don't have Visio on my PC at home but if you want to translate the source IP address of incoming packets for example. translate 10.150.100.100 to 192.168.5.10

  public static 192.168.5.10 (exterior, Interior) 10.150.100.100 netmask 255.255.255.255

  If you have a source address pool you could do

  NAT (outside) 3 10.150.100.0 255.255.255.0 outside

  Global (inside) 3 192.168.5.10

  HTH

  Jon

• Additional non contiguous internet address space?

  Since I can't add a secondary address to an interface on my Pix, how would you add 27 other internet address space?

  I guess I can add another interface, put the address of 27 new and add this interface to the same VLAN as my other external interface?

  I use PixOS 6.3 and am curious on if there is a better way to do it, or if someone has any advice for me?

  You can use this/27 nat network.

• Change of IP network address space

  Hi all

  I work with our local IT people to get a new address space that is larger than what we have currently allocated.  We currently have two class C address which are separate, but adjacent blocks.  We will migrate to a new address space which is a 22 space (4 blocks of class C).

  I'm curious to know what is the best way to migrate existing systems to new block of addresses.  Our Lab Manager users have about 50 deployed computers.  I'm not adverse to force people to cancel the deployment and redeployment can help to change, but what is the best way to manage the change of the IP address of the virtual machine itself?  LM will take care of this for us, we have to recustomize or do it manually?

  Since we have networks spanning host, is it possible to convert the existing physical network virtual and just that bridge to the new physical network?  This could be the solution of effort low right now and so let me migrate slowly / system configurations to the physical network over time.

  Thank you

  Jason

  Hi Jason,

  Couple options based on your questions:

  (a) lab Manager not automatically refreshes your virtual machine if your subnet is changed in physical network settings.  You will need to cancel the deployment/redeployment for LM to get a new IP address from the pool and recustomization on the existing VMs for the address to apply force.  If you use fences, you need to make sure that the vRouter gets also cancelled/made to implement the rules by the new addressing scheme.  You could also just manually change the IP addresses in the virtual machines but a cancel the deployment/redeployment is necessary in any event.

  (b) you can potentially convert the physical network existing in virtual (actually just create a virtual network with similar parameters.  There is no option for a conversion of this type) and how to bind V networks P.  However, with this method, you will have to add the new virtual network to each configuration and also to change the NIC of each virtual computer to connect to the new virtual network.  You will then have to cancel the deployment/redeployment configs, forcing the customization (pulling of the new pool of virtual IP networks even if it's the same subnet) and a virtual and physical link.

  I'd say you're better off with option has).

  Let me know if you have any other questions.

• Virgin Media UK has changed his ISP address and I cannot add the new address through automatic or manual, how do I do it?

  Virgin used to use google for it's email service has recently created a new ISP of it own. I'm unable to find using the automatic "Add account" in Thunderbird. I tried to do it manually without joy. I can't get into my email account using webmail blank page. Any suggestions please?
  GMN

  Via the Menu bar
  File > new > existing e-mail account
  or
  Via the mail toolbar
  Icon of the menu > new message > e-mail account

  Enter the name
  Enter the full e-mail address
  Enter the password - same one you use to access webmail

  Select this option to remember password.
  Click on "continue".

  Thunderbird tries to search for configuration settings.
  Check: He selected the right account type: POP or IMAP
  Are the correct settings... see info at the link below.
  the manually set/correct
  Click on the button "Manual Configuration".

  See here the setting on the server:
  http://help.virginmedia.com/system/selfservice.controller?configuration=1001 & PARTITION_ID = 1 & TIMEZONE_OFFSET = & usertype = 1 & VM_CUSTOMER_TYPE = Cable & cmd = VIEW_ARTICLE & article_id = 2743

  According to your email... the portion after the @, this will determine what will be the name of the server for POP/IMAP/SMTP.

  Use the "Re-test" button to verify the changes.
  Click 'Done' to create the email account.

• I change ISmoving email from one ISP to another ISP address address

  I have changed ISP and want to move my existing emails, massively if possible, to a new email address, how do I?

  You ask about your e-mail messages? You can select these messages and move or copy it to a mailbox on your Mac.

  Ask yourself how to let your contacts know that you have a new email address?

• No web address space or the buttons (Tools, view, back, etc.)

  Removing a toolbar, I accidentally downloaded during the installation of software, I lost the space for entering web addresses and also all the buttons - file, view, tools, etc.. Help.

  This has happened

  Each time Firefox opened

  == I deleted the toolbar of Device Doctor

  You can hide the menu bar in Firefox 3.6 on Windows, on "view > toolbars" or via the contextual right click menu on a toolbar.
  Press in and hold the Alt key to display the menu bar.
  Go to "view > toolbars", right click on the menu bar, or press Alt + V T to select the toolbars to show or hide.

  See also what happened to the file, edit and view menus?

• Unable to connect to the internet. PC a firewall via ethernet. "no isp address.

  I have windows xp on my pc. I can't connect to the internet it tells me that I am a firewall via ethernet. and I did not have an Internet service provider address and the address of the Internet service provider on my computer laptop girls is different. my ISP told me that I need to download and install something out of microsoft will fix my problem automaticily. I know not what I'm supposed to download and not more than my provider of the Internet service provider. can anyone help.

  Hi angieb9171,

  · Provide you receive the exact error message.

  · Who is the provider of Internet services on the computer?

  · When was the last time you were able to connect to the internet?

  · What type of internet connection do you use?

  · You have security software installed on the computer

  Follow the methods below to hone in on the question:

  Method 1:

  The security software installed on the computer may block access to the internet on the computer.

  If you have any third-party security software installed on the computer, turn it off and check if it works.

  Important: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2:

  Follow the steps in the below link: how to troubleshoot possible causes of Internet connection problems in Windows XP:http://support.microsoft.com/kb/314095

  See also: the problems of Internet connection:http://windows.microsoft.com/en-US/windows-vista/Troubleshoot-Internet-connection-problems

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Configure the module of firepower ASA IP address

  Hello

  today I tried to configure the IP address of the late ASA power module. But unfortunately I failed. The firewall is in the direction of the situation and also do have not any router on the LAN. So, I stop the management interface and configure the IP of firepower on the network server management. But unfortunately I can not ping the gateway IP address that is actually one of the interface of the firewall. It is the series x 5525 firewall. So this isn't a any interface dedicated to management of firepower. It would be nice to know where I made the mistake? I recharge and recovery of the module and I consider the State as always state of recovery. So my question is looking for there is a problem with the module itself?

  Module status

  SH module

  Model serial number of map mod
  ---- -------------------------------------------- ------------------ -----------
  0 ASA 5525 - X with SW, GE, 1 GE Mgmt, AC 8 data
  IPS unknown n/a
  cxsc unknown n/a
  SFR unknown n/a

  MAC mod Fw Sw Version Version Version Hw address range
  ---- --------------------------------- ------------ ------------ ---------------
  0 f  1.0                                                2.1(9)8      9.2(3)
  ips                                                         N/A          N/A
  cxsc                                                       N/A          N/A
  sfr                                                         N/A          N/A

  The Application name of the SSM status Version of the Application of SSM mod
  ---- ------------------------------ ---------------- --------------------------
  IPS unknown current Image number does not apply
  cxsc unknown No. current Image does not apply

  Data on the State of mod aircraft compatibility status
  ---- ------------------ --------------------- -------------
  0 to Sys does not apply
  IPS does not is not Applicable
  cxsc does not not Applicable
  SFR recover not Applicable

  Config firewall Interface

  #Interface IP-Address OK? Method State Protocol
  GigabitEthernet0/0 10.101.106.115 YES CONFIG upward upwards
  GigabitEthernet0/1 10.106.106.115 YES CONFIG upward upwards
  GigabitEthernet0/2 10.103.254.254 YES CONFIG upward upwards
  GigabitEthernet0/3 10.0.210.254 YES CONFIG upward upwards
  GigabitEthernet0/4 10.100.254.254 YES CONFIG upward upwards
  GigabitEthernet0/5 10.107.253.115 YES CONFIG upward upwards

  #interface GigabitEthernet0/1
  Speed 1000
  full duplex
  nameif Server
  security-level 70
  IP 10.106.106.115 255.255.0.0

  Fire power management configuration

  Host name: 1 Swiss francs
  Configuration Management Interface

  Configuration IPv4: static
  IP address: 10.106.251.253
  Network mask: 255.255.0.0
  Gateway: 10.106.106.115

  IPv6 configuration: Stateless autoconfiguration

  Configuration of DNS:
  Domain: XXX.local
  Search:
  XXX.local
  DNS server:
  10.101.251.2
  10.201.251.2

  Any help will be greatly appreciated.

  Thank you

  Sari

  Sari,

  Even if there is not a physical module services fire power management port, it uses Management0/0 port to connect to the module of SFR.  If you like on the same VLAN as your server VLAN on the SAA plug Management0/0 port on a switch that is sharing the network server VLAN and give the module SFR an IP address on the same subnet.

  Make sure that you remove the statement under interface Management0/0 nameif. Here is an example:

  interface Management0/0
  management only
  No nameif
  security-level 100
  no ip address