Satellite M40 and Vista display resolution - can not play not directly

Similar Questions

• My hard drive crashed and I had to reload vista. I can not find the product key. What can I do?

  My hard drive crashed and I had to reload vista. I can not find the product key. What can I do?

  Contact the manufacturer of your computer.

  Look on the side/back if a desktop computer; down if a laptop.

  Also look on any packaging the VistaDVD came, if you bought it yourself.

  If the product key is lost, we can NOT help you replace.

  See you soon.

  Mick Murphy - Microsoft partner

• Satellite M40-265 LCD displays the image complete but crushed

  Satellite M40-265 LCD displays the image complete but crushed on two-thirds of the screen

  When my Satellite M40 - 265 ATIMobility Radeon X 700 and omega 3.8442, Windows Xp drivers, Sp3 boots by setting the LCD + analog RGB, initially only displays on the external screen after startup can be switched with Fn + F5 on LCD. Then appears on the LCD, the complete picture but only two thirds of the screen, third, the right is black. It works so well when the external monitor is not connected during the boot.

  When defini set to auto, select the display to the computer starts only when an external monitor is connected, then after that, I spent in the LCD screen.
  Damage to the inverter is excluded as already checked. Inspect visually the cable of the LCD displays nothing. Beside the left speaker, a ground wire (black) to screwed, but it is s t connected anywhere.

  Starting in safe mode is possible to use a display fullscreen on external

  Hello

  The M40 is a not sure oldie about the available settings in the BIOS and in the graphics options, but I think you should check the settings of the graphics card ATI Catalyst.
  I remember that ATI catalyst supports certain options such as resizing the Image. Here you can select the image scale Panel option full size
  In addition, you must set the resolution on the internal screen at native resolution of 1280 x 800
  I think that the external monitor supports the resolution, which is not the same thing as the screen internal.

• have windows 7 x 64 and hp deskjet 656c can not load the driver he keeps giving me error code 0 x 00000057 down

  have windows 7 x 64 and hp deskjet 656c can not load the driver he keeps giving me error code 0 x 00000057 down

  Hello

  Please contact the Microsoft community. We will be happy to help you with your concern.

  According to the description, you can not install hp deskjet 656c driver you get error code 0x00000057c.

  How do you try to install the driver? Is it through the disc or via the site?

  Method 1: Use a troubleshooting tool to solve the problem:

  Open the hardware and devices Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2: temporarily Disable the Antivirus and firewall and try to install

  Enable or disable Windows Firewall

  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 3: Try to install in the clean boot

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After installing windows update, follow step 3 in the link provided to return the computer to a Normal startupmode.

  Please follow these recommended steps, review the additional information provided and post back if you still have the problem. I will be happy to provide you with additional options.

• Just found out that my intrnet provider has an imap email set up and means that I can not leave a copy of my mails on the server, correct?

  Just found out that my intrnet provider has an imap email set up and means that I can not leave a copy of my mails on the server, correct?

  Incorrect... IMAP is synchronized. So to remove a mail locally and deletes it from the server.

• Adobe muse working on a menu lighbox and need help I can not the box of active relaxation, even if I checked trigger on top

  Adobe muse work on a menu lighbox and need help I can not the box of active relaxation, even if I checked trigger on top anyone with a suggestion?

  Thank you, it ends up being a superposition problem, thank you, but I can see where an invisible element could be a problem too. I use to select it all the trick to understand where I've been in Illustrator all time years ago I am so new Muse that I kept thinking can be as simple as I can go back to things I've done in other Adobe programs, but it is! and I'm an old school Print Designer who doesn't REALLY know the thing no coding thank once again

• Hello, I have problems with Creative Cloud Packager. I bought this product yesterday and since then I can not download completely all components. 59% or 65% of the download I get the message: "connect to the internet and try again." I am connected to Inte

  Hello, I have problems with Creative Cloud Packager. I bought this product yesterday and since then I can not download completely all components. 59% or 65% of the download I get the message: "connect to the internet and try again." I am connected to the internet through Ethernet, I checked my connections through various steps recommended buy Adobe to see if my connection is correct and he is!, so why I can't complete the download process. I feel frustrated because I have clients awaiting results of my work that I can do right now. I have read all the information on the Adobe pages but nothing shows that can help solve my problem also the way things are described sometimes seem complicated and exotic as; not everything I understand particularly when it comes to some technical descriptions or abbreviations. I would be grateful someone help and advice on this topic. Thank you Nina

  Hi Nina,

  This link might help: cloud creative activation and troubleshooting of sign-in

  Kind regards

  Sheena

• CS5 I get "and FTP error produced - can not connect to the host."

  CS5 I get "and FTP error produced - can not connect to the host." Your login or password is incorrect. Please check your login information. I work with three sites. One of them connects fine, but two of them get this message - and I am well aware that the user name and password are correct on each of them. Can anyone help?

  Call your host.

  Nancy O.

• Satellite P200-1JY and Win7 - SDHC card can not be read

  Hello
  I am owner of a Satellite P200-1JY, my OS is windows 7 and I can't read SDHC cards, but only the SD card.
  On the same PC under windows XP, I could read SDHC cards!
  So I should have a driver problem?

  Thanks for your help.

  Hello

  First of all, I checked your manual for Satellite P200 and it supports the following types of SD card:
  -SD up to 2GB
  -SDHC: 4 GB

  You use these SD cards or with more capacity?

  If you use these supported cards I will try to update the driver of the card reader. You can try the Flash Media Driver for Vista, you can get on the official page of Toshiba.
  Check this box!

• Vista Home Premium can not find applications and networks.

  Vista Home Premium (manuf. installed) can not find applications (application to go to define associations in control panels?), does not recognize my wireless network and available restore points are only for dates after the problem has occurred.  If I buy a Home Premium DVD and do a clean install should I expect to get a working computer?

  Hello

  You mean reinstall the OS completely? If you have Vista DVD you can do however make sure to
  totally your data off the drive of backup, and you need to reinstall your programs. If you do not
  Disks of Vista, you can buy them in your machine to cheap system. If you don't care about existing programs
  Then you can make a complete new installation - just select the format options that erases the entire disc (this
  Clears all data as well).

  Some system manufacturers use Partitions recovery and other methods to allow you to go back to a
  completely new facility. So check with your system manufacturer to see what options you must do
  - and it's certainly doable - just a question of the process the manufacturer of the system set in place to
  you.

  What are the system recovery options in Windows Vista?
  http://windowshelp.Microsoft.com/Windows/en-us/help/2b3724d1-f4ad-5b26-16dc-3e9e66f4be5e1033.mspx

  This tells you how to access the System Recovery Options and/or Vista disk (some manufacturer have other methods)
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  -----------------------------------------------------------------

  How to perform a repair for Vista Installation (this keeps your data if the backup off the)
  Player is safe)
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  How to do a clean install and the installer with a full Version of Vista - this erase ALL programs and data on
  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  This tells you how to access the System Recovery Options and/or Vista disk
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  How to do a clean install with a Version upgrade to Vista - this wipes ALL programs and data on
  http://www.Vistax64.com/tutorials/68767-clean-install-upgrade-Vista.html

  How to do a Custom Installation of Vista - this is a clean install should, however, save your data
  http://www.Vistax64.com/tutorials/241565-custom-install-Vista.html

  Upgrade to another edition of Windows Vista - this should keep the programs and data
  http://windowshelp.Microsoft.com/Windows/en-us/help/3af7e05f-4d2a-4af7-A168-9242f9093bb81033.mspx

  Installation and reinstallation of Windows (upgrade - store programs and data or New Installation that removes them)
  http://windowshelp.Microsoft.com/Windows/en-us/help/e77344fa-e978-464c-953e-eba44f0522671033.mspx

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• Satellite A300 and Vista 64-bit - unknown and non-functional devices

  I have the Satellite A300-1Gn
  Here are some features:

  Technology
  type: technology Intel® Centrino® 2 processor with processor Intel® Core 2 Duo P8400, clock speed of the Intel® PM45 Express and Intel® WiFi Link 5100 chipset: 2.26 GHzFront Side Bus: 1066 MHz2nd level cache: 3 MB
  
  Operating system
  GenuineWindows Vista® Home Premium 32 - bit Edition (pre-installed, Toshiba-HDD recovery)

  
  
  System memory
  standard: 3 072 (2 048 + 1 024) MB
  maximum extension: 8 192 MBtechnology: DDR2 RAM (800 MHz)
  
  Hard drive
  capacity: 320 GB
  Certification: S.M.A.R.T. disc rotation: 5 400 rpm
  
  DVD Super Multi (Double Layer) drive
  Compatibility: CD-ROM, CD - R, CD - RW, DVD-ROM, DVD-R, DVD + R, DVD + R (DL), a DVD-R (DL), DVD - RW, DVD + RW, DVD-RAM
  Maximum speed: read: 24 x CD-ROM, 8 x DVD-ROM / write: 24 x CD - R, 4 x
  CD - RW, 10 x CD - RW, 16 x CD - RW, DVD-R 8 x, 6 x DVD-R (Double Layer), the HS
  6 x DVD - RW, 8 x DVD + R, DVD + R 6 x (dual layer), 8 x 5 x DVD-RAM, DVD + RW
  type: DVD Super Multi (Double Layer) drive
  
  Display
  "size: 15.4"
  type: Toshiba TruBrite® WXGA + TFT high brightness display resolution internal: 1 400 x 900
  
  Graphic adapter
  Manufacturer: ATI
  type: ATI Mobility Radeon™ HD 3650 supporting HyperMemory™ technology memory amount: 512 MB dedicated VRAM (up to a total of 2 302 MB available)
  graphics memory using HyperMemory™ with 4 GB of system memory technology)
  memory type: GDDR2 video (500 MHz) bus RAM (resp. RAM video and system memory combined) connected: 16 x PCI Express...

  I installed windows vista 64-bit to try it, and I started to download all the drivers I could find from Toshiba site... But I still have in my device under 'other devices' management 3xbase system of the device (who report that they do not work) and an unknown device "it works ok same woithout this, but my HD movies are restless...
  Is it posible to thath I missed something... Bluetooth, wireless, sound, games, camera, mic, etc., everything works...

  Thanks in advance guys (or girls);...

  Hello

  Have you installed the right graphics card driver?
  The Sat A300-1GN belongs to the PSAGCE series.
  I checked the page of the Toshiba driver and there are two pilots;
  I think that you should choose the ATI driver 8.477 display because this driver supports the Mobility Radeon HD 34xx/36xx chips.

  Other base system devices could be Bridge Media slot (for SD cards), touchpad, HDMI Control Manager.

  I didn't find these drivers 64-bit on Toshiba page. Maybe you should choose some drivers for Vista 32 bit

• Satellite P200 - HD-DVD Player Toshiba can not read HD-DVD

  Hello.

  I have a problem with my Satellite P200-1: can not read HD DVD. There is a message that says that the video may not be in an external device.

  The problem is the same if I try on the screen of the laptop or on the TV (Sony Bravia Full HD) with HDMI. I have the latest driver and software for vista sp1 installed...

  Some have an idea?
  Sorry to talk so badly...

  Published by: ADMIN

  I think I know what's wrong;

  Check this Toshiba TB document;

  [HD DVD title does not play ("unable to output the video to an external device"): http://askiris.toshiba.com/ToshibaSupportSite/search.do?cmd=displayKC&docType=kc&externalId=1664 788xml & sliceId = & dialogid = 41741513 & stateId = 0% 200% 20 41739828]

  To resolve this problem, you will need to update the Audio driver Realtek for Windows Vista.

• Satellite M40-145: CD/DVD player will not play some DVD

  Hello!

  I am the owner of a Satellite M40-145 bought a little over a year; DVD driver worked perfectly until three days ago, but today I discovered something... strange. Still, it reads the DVD business and burned the DVD + r, but apparently it does not read the DVD - r serious more. I tried with different DVD - Rs, I burned the same DVD player, without success; trying to access the DVD gives a message "insert the disk in drive D:".

  In this case, I'm talking about movies on DVD. Please tell me there is a way to fix this without sending the computer to the customer service...
  I wouldn't think he fell down a few days after the expiry date of the guarantee.

  Hello

  Well, you can try to remove the Device Manager order form.
  After restarting again the reader should be recognized again. Then, check if it is possible to read the DVD - R, CD.

  But the question sounds like a lens calibration error. If you use different media, the lens must be calibrated again. But if this procedure fails, the drive is not able to read or write the DVD for example.
  Unfortunately, in this case only the replacement of the drive will resolve this problem.

• Satellite U400 and WXP - No WLAN LAN not internet

  Hello everyone and thank you for reading my post.

  I just bought a new Satellite U400 - 12R PSU40E and installed quickly clean Windows XP 32-bit with SP2, the installation was flawless after changing HARD drive in compatibility mode mode. Downloaded and installed all the drivers from this site for my model which included the Realtek network drivers for the Marvel Yukon for the LAN and wireless. No yellow dot in the currency manager and the system is just perfect.

  However, for the life of me, I CAN NOT connect this bloody thing for any LAN or WLAN, the funniest is when I connect the LAN cable in my office in it, the little icon in the status bar displays connected and all of the ip addresses are correct, same COMODO starts to automatically download the updates and full updates after a while but I can't surf the internet to all.

  I even installed Firefox and chrome and with any 3 browsers I can browse the internet, even if all the anti virus, COMODO, or windows firewall all turns off.

  Please help me in anyway or advice or pointers I might have missed.

  Thanking you in advance.

  Reza.

  Thanks for the comments! :-)

  I had the same problem as you for years. I had Zone Alarm and if I close this application I do not have access to internet. Thus, the application should still work.

  However, I hope you don t also this problem.

• Satellite A105-4384: Vista Print Spooler will not continue to operate

  I upgraded my Satellite A105-4384 to Windows Vista professional. I downloaded all the updates driver from Toshiba Web site and since... my willingness to print spooler service is running do not.

  It starts without error but dies immediately. Please provide a fix for this. FOR INFO. He died w / no installed printer.

  Hello

  I don't know what exactly, but I wonder if the print spooler service has something to do with Toshiba directly or maybe you should ask Microsoft which is bad it.

  I use Vista Ultimate on older Satellite M70 and I can print all my Word documents.